Spinal intraoperative three-dimensional navigation: correlation between clinical and absolute engineering accuracy

Ex vivo comparison of pin placement with patient-specific drill guides or freehand technique in canine cadaveric spines

OBJECTIVE

To compare vertebral implant placement in the canine thoracolumbar spine between 3D-printed patient-specific drill guides (3DPG) and the conventional freehand technique (FH).

STUDY DESIGN

Ex vivo study.

ANIMALS

Cadaveric canine spines (n = 24).

METHODS

Implant trajectories were established for the left and right sides of the T10 through L6 vertebrae based on computed tomography (CT) imaging. Customized drill guides were created for each vertebra of interest. Each cadaver was randomly assigned to one of six veterinarians with varying levels of experience placing vertebral implants. Vertebrae were randomly assigned a surgical order and technique (3DPG or FH) for both sides. Postoperative CT images were acquired. A single, blinded observer assessed pin placement using a modified Zdichavsky classification.

RESULTS

A total of 480 implants were placed in 240 vertebrae. Three sites were excluded from the analysis; therefore, a total of 238 implants were evaluated using the FH technique and 239 implants using 3DPG. When evaluating implant placement, 152/239 (63.6%) of 3DPG implants were considered to have an acceptable placement in comparison with 115/248 (48.32%) with FH. Overall, pin placement using 3DPG was more likely to provide acceptable pin placement (p < .001) in comparison with the FH technique for surgeons at all levels of experience.

CONCLUSION

The use of 3DPG was shown to be better than the conventional freehand technique regarding acceptable placement of implants in the thoracolumbar spine of canine cadavers.

CLINICAL SIGNIFICANCE

Utilizing 3DPG can be considered better than the traditional FH technique when placing implants in the canine thoracolumbar spine.

The pedicle screw accuracy using a robotic system and measured by a novel three-dimensional method

Robotics in medicine is associated with precision, accuracy, and replicability. Several robotic systems are used in spine surgery. They are all considered shared-control systems, providing "steady-hand" manipulation instruments. Although numerous studies have testified to the benefits of robotic instrumentations, they must address their true accuracy. Our study used the Mazor system under several situations and compared the spatial accuracy of the pedicle screw (PS) insertion and its planned trajectory. We used two cadaveric specimens with intact spinal structures from C7 to S1. PS planning was performed using the two registration methods (preopCT/C-arm or CT-to-fluoroscopy registration). After planning, the implant spatial orientation was defined based on six anatomic parameters using axial and sagittal CT images. Two surgical open and percutaneous access were used to insert the PS. After that, another CT acquisition was taken. Accuracy was classified into optimal, inaccurate and unacceptable according to the degree of screw deviation from its planning using the same spatial orientation method. Based on the type of spatial deviation, we also classified the PS trajectory into 16 pattern errors. Seven (19%) out of 37 implanted screws were considered unacceptable (deviation distances > 2.0 mm or angulation > 5°), and 14 (38%) were inaccurate (> 0.5 mm and ≤ 2.0 mm or > 2.5° and ≤ 5°). CT-to-fluoroscopy registration was superior to preopCT/C-arm (average deviation in 0.9 mm vs. 1.7 mm, respectively, p < 0.003), and percutaneous was slightly better than open but did not reach significance (1.3 mm vs. 1.7 mm, respectively). Regarding pattern error, the tendency was to have more axial than sagittal shifts. Using a quantitative method to categorize the screw 3D position, only 10.8% of the screws were considered unacceptable. However, with a more rigorous concept of inaccuracy, almost half were non-optimal. We also identified that, unlike some previous results, the O-arm registration delivers more accurate implants than the preopCT/C-arm method.

[Spinal navigation with preoperative computed tomography]

OBJECTIVE

Safe placement of posterior cervical-sacral pedicle screws, S2-Ala-iliac screws, iliac screws, transarticular screws C1/2, translaminar screws C2 or cervical lateral mass screws under the guidance of spinal navigation.

INDICATIONS

All posterior spinal instrumentations with screws: instabilities and deformities of rheumatic, traumatic, neoplastic, infectious, iatrogenic or congenital origin; multilevel cervical spinal stenosis with degenerative instability or kyphosis of the affected spinal segment.

CONTRAINDICATIONS

There are no absolute contraindications for spinal navigation.

SURGICAL TECHNIQUE

Cervical spine: Prone position on a gel mattress, rigid head fixation, e.g., with Mayfield tongs; if appropriate, closed reduction under lateral image intensification; thoracic + lumbar spine: prone position on a cushioned frame; midline posterior surgical approach at the level of the segments to be instrumented; if necessary, open reduction; insertion of the cervical/upper thoracic screws under the guidance of spinal navigation; if necessary, posterior decompression; instrumentation longitudinal rods; if fusion is to be obtained, decortication of the posterior bone elements with a high-speed burr and onlay of cancellous bone or bone substitutes.

POSTOPERATIVE MANAGEMENT

In stable instrumentations, no postoperative immobilization with orthosis is necessary, removal of drains (if used) 2-3 days postoperatively (postop), removal of the sutures 14 days postop, clinical and x‑ray controls 3 and 12 months postop or in case of clinical or neurological deterioration.

RESULTS

Numerous studies showed that the use of spinal navigation significantly reduces implant malplacement rates, complications, and revision surgery. Furthermore, intraoperative radiation exposure to the operation team can be reduced by up to 90%.

Ultrasound-based navigated pedicle screw insertion without intraoperative radiation: feasibility study on porcine cadavers

BACKGROUND

Navigation systems for spinal fusion surgery rely on intraoperative computed tomography (CT) or fluoroscopy imaging. Both expose patient, surgeons and operating room staff to significant amounts of radiation. Alternative methods involving intraoperative ultrasound (iUS) imaging have recently shown promise for image-to-patient registration. Yet, the feasibility and safety of iUS navigation in spinal fusion have not been demonstrated.

PURPOSE

To evaluate the accuracy of pedicle screw insertion in lumbar and thoracolumbar spinal fusion using a fully automated iUS navigation system.

STUDY DESIGN

Prospective porcine cadaver study.

METHODS

Five porcine cadavers were used to instrument the lumbar and thoracolumbar spine using posterior open surgery. During the procedure, iUS images were acquired and used to establish automatic registration between the anatomy and preoperative CT images. Navigation was performed with the preoperative CT using tracked instruments. The accuracy of the system was measured as the distance of manually collected points to the preoperative CT vertebral surface and compared against fiducial-based registration. A postoperative CT was acquired, and screw placements were manually verified. We report breach rates, as well as axial and sagittal screw deviations.

RESULTS

A total of 56 screws were inserted (5.50 mm diameter n=50, and 6.50 mm diameter n=6). Fifty-two screws were inserted safely without breach. Four screws (7.14%) presented a medial breach with an average deviation of 1.35±0.37 mm (all <2 mm). Two breaches were caused by 6.50 mm diameter screws, and two by 5.50 mm screws. For vertebrae instrumented with 5.50 mm screws, the average axial diameter of the pedicle was 9.29 mm leaving a 1.89 mm margin in the left and right pedicle. For vertebrae instrumented with 6.50 mm screws, the average axial diameter of the pedicle was 8.99 mm leaving a 1.24 mm error margin in the left and right pedicle. The average distance to the vertebral surface was 0.96 mm using iUS registration and 0.97 mm using fiducial-based registration.

CONCLUSIONS

We successfully implanted all pedicle screws in the thoracolumbar spine using the ultrasound-based navigation system. All breaches recorded were minor (<2 mm) and the breach rate (7.14%) was comparable to existing literature. More investigation is needed to evaluate consistency, reproducibility, and performance in surgical context.

CLINICAL SIGNIFICANCE

Intraoperative US-based navigation is feasible and practical for pedicle screw insertion in a porcine model. It might be used as a low-cost and radiation-free alternative to intraoperative CT and fluoroscopy in the future.

The accuracy and effectiveness of automatic pedicle screw trajectory planning based on computer tomography values: an in vitro osteoporosis model study

Background

Pedicle screw placement in patients with osteoporosis is a serious clinical challenge. The bone mineral density (BMD) of the screw trajectory has been positively correlated with the screw pull-out force, while the computer tomography (CT) value has been linearly correlated with the BMD. The purpose of this study was to establish an in vitro osteoporosis model and verify the accuracy and effectiveness of automated pedicle screw planning software based on CT values in this model.

Methods

Ten vertebrae (L1-L5) of normal adult pigs were randomly divided into decalcification and control groups. In the decalcification group, the vertebral bodies were decalcified with Ethylenediaminetetraacetic acid (EDTA) to construct an in vitro osteoporosis model. In the decalcification group, automatic planning (AP) and conventional manual planning (MP) were used to plan the pedicle screw trajectory on the left and right sides of the pedicle, respectively, and MP was used on both sides of the control group. CT values of trajectories obtained by the two methods were measured and compared. Then, 3D-printed guide plates were designed to assist pedicle screw placement. Finally, the pull-out force of the trajectory obtained by the two methods was measured.

Results

After decalcification, the BMD of the vertebra decreased from − 0.03 ± 1.03 to − 3.03 ± 0.29 (P < 0.05). In the decalcification group, the MP trajectory CT value was 2167.28 ± 65.62 Hu, the AP trajectory CT value was 2723.96 ± 165.83 Hu, and the MP trajectory CT value in the control group was 2242.94 ± 25.80 Hu (P < 0.05). In the decalcified vertebrae, the screw pull-out force of the MP group was 48.6% lower than that of the control group (P < 0.05). The pull-out force of the AP trajectory was 44.7% higher than that of the MP trajectory (P < 0.05) and reached 97.4% of the MP trajectory in the control group (P > 0.05).

Conclusion

Automatic planning of the pedicle screw trajectory based on the CT value can obtain a higher screw pull-out force, which is a valuable new method of pedicle screw placement in osteoporotic vertebre.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05101-6.

Does MIS-TLIF or TLIF result in better pedicle screw placement accuracy and clinical outcomes with navigation guidance?

Background

Although previous studies have suggested that navigation can improve the accuracy of pedicle screw placement, few studies have compared navigation-assisted transforaminal lumbar interbody fusion (TLIF) and navigation-assisted minimally invasive TLIF (MIS-TLIF). The entry point of pedicle screw insertion in navigation-assisted MIS-TLIF (NM-TLIF) may deviate from the planned entry point due to an uneven bone surface, which may result in misplacement. The purpose of this study was to explore the pedicle screw accuracy and clinical consequences of MIS-TLIF and TLIF, both under O-arm navigation, to determine which surgical method is better.

Methods

A retrospective study of 54 patients who underwent single-segment NM-TLIF or navigation-assisted TLIF (N-TLIF) was conducted. In addition to the patients’ demographic characteristics, intraoperative indicators and complications, the Oswestry Disability Index (ODI) and visual analog scale (VAS) score were recorded and analyzed preoperatively and at the 1-, 6-, and 12-month and final postoperative follow-ups. The clinical qualitative accuracy and absolute quantitative accuracy of pedicle screw placement were assessed by postoperative CT. Multifidus muscle injury was evaluated by T2-weighted MRI.

Results

Compared with N-TLIF, NM-TLIF was more advantageous in terms of the incision length, intraoperative blood loss, drainage volume, time to ambulation, length of hospital stay, blood transfusion rate and analgesia rate (P < 0.05). The ODI and VAS scores for low back pain were better than those of N-TLIF at 1 month and 6 months post-surgery (P < 0.05). There was no significant difference in the clinical qualitative screw placement accuracy (97.3% vs. 96.2%, P > 0.05). The absolute quantitative accuracy results showed that the axial translational error, sagittal translational error, and sagittal angle error in the NM-TLIF group were significantly greater than those in the N-TLIF group (P < 0.05). The mean T2-weighted signal intensity of the multifidus muscle in the NM-TLIF group was significantly lower than that in the N-TLIF group (P < 0.05).

Conclusions

Compared with N-TLIF, NM-TLIF has the advantages of being less invasive, yielding similar or better screw placement accuracy and achieving better symptom relief in the midterm postoperative recovery period. However, more attention should be given to real-time adjustment for pedicle insertion in NM-TLIF rather than just following the entry point and trajectory of the intraoperative plan.

Can Postoperative CT Imaging in Spine Surgery Be Replaced by Intraoperative 3D Rotation With the C-Arm?: Results of a Prospective Single Center Cohort Study

Objective: Dorsal instrumentation of the spine is an established treatment option for a range of spinal pathologies. Intraoperative fluoroscopy connected with navigation minimize the risk of incorrect screws placement. In several cases, post-operative CT scans are needed to verify possible mismatches. In this study, we evaluated the efficacy of 3D intraoperative fluoroscopy as compared to post-operative CT and the need of post-operative CT.

Methods: We conducted a prospective single-center cohort study, 94 patients were included. The screws were implanted using 3D rotation with C-arm and navigation system. The definitive position of the screws was verified by a post-operative CT scan. Finally, we compared the discrepance between intraoperative imaging and post-operative CT scan using Rampersaud-grade (A-D).

Results: 607 screws in 94 patients were included. Some 3% of the screws had to be replaced immediately intraoperative due to inadequate position with lateral or medial trajectory. An A-score was achieved for 85.5% of the 3D controlled screws and 87% of the post-operative CT. A B-score was found in 11.5% of either groups. In the 3D group a C-score was achieved for 2.5% and in the CT group for 0.8%. A D-score was found in 0.5% of the screws in both groups, p = 0.45. Only a mismatch of 3% could be detected for the intraoperative and post-operative imaging results.

Conclusion: Our study data shows that the placement of screws using the 3D rotation and navigation tool is safe and accurate. There were no relevant mismatches between intraoperative images and the post-operative CT.

THE SAFETY AND EFFICACY OF ROBOT-ASSISTED STEREOTACTIC BIOPSY FOR BRAIN GLIOMA: EARLIEST INSTITUTIONAL EXPERIENCES AND EVALUATION OF LITERATURE

Robot-assisted brain tumor biopsy is becoming one of the most important innovative technologies in neurosurgical practice. The idea behind its engagement is to advance the safety and efficacy of the biopsy procedure, which is much in demand when planning the management of endocranial tumor pathology. Herein, we provide our earliest institutional experiences in utilizing this mesmerizing technology. Cranial robotic device was employed for stereotactic robot-assisted brain glioma biopsy in three consecutive patients from our series: an anaplastic isocitrate dehydrogenase (IDH) negative astrocytoma (WHO grade III) located in the right trigone region of the periventricular white matter; a low grade diffuse astrocytoma (WHO grade II) of bilateral thalamic region spreading into the right mesencephalic area; and an IDH-wildtype glioblastoma (WHO grade IV) of the right frontal lobe producing a contralateral midline shifting. Robot-assisted tumor biopsy was successfully performed to get tissue samples for histopathologic and immunohistochemical analysis. The adjacent tissue iatrogenic damage of the eloquent cortical areas was minimal, while the immediate postoperative recovery was satisfactory in all patients. In conclusion, considering the preliminary results of our early experiences, robot-assisted tumor biopsy was proven to be a feasible and accurate procedure when surgery for brain glioma was not an option. It may increase safety and precision, without expanding surgical time, being similarly effective when compared to standard stereotactic and manual biopsy. Using this method to provide accurate sampling for histopathologic and immunohistochemical analysis is a safe and easy way to determine management strategies and outcome of different types of brain glioma.

Risk factors for acute proximal junctional kyphosis after adult spinal deformity surgery in preoperative motion analysis

OBJECTIVE

This study aimed to examine which motion analysis parameters regarding the dynamic aspects and/or balance affect the development acute proximal junctional kyphosis (PJK) following adult spinal deformity (ASD) surgery.

METHODS

A total of 90 consecutive patients were recruited prospectively, who underwent a corrective surgery for ASD with sagittal imbalance. According to the development of acute PJK within 6 months after surgery, the patients were divided into the PJK+ and PJK- groups. Before surgery, three-dimensional gait analyses were performed using a motion analysis system. The preoperative continuous and categorical variables were compared between the PJK+ and PJK- groups using independent t tests and chi-square tests, respectively. Finally, a multivariate logistic regression model was used to identify the risk factors and calculate the odds ratio (OR) for acute PJK.

RESULTS

A total of 20 and 70 patients were classified into the PJK+ and PJK- groups, respectively. There were no differences in the spinopelvic radiologic parameters pre- and postoperatively between the PJK+ and PJK- groups. The PJK+ group showed a significantly higher mean anterior pelvic tilt (Ant-PT) angle in preoperative motion analysis than the PJK- group (P = 0.001 for both sides). Multivariate analysis identified the mean Ant-PT angle (P = 0.047; OR 1.127; 95% CI 1.002-1.267) as a significant risk factor for acute PJK.

CONCLUSION

Preoperative Ant-PT angle during walking was associated with a higher OR in acute PJK after surgery.

Frameless Patient Tracking With Adhesive Optical Skin Markers for Augmented Reality Surgical Navigation in Spine Surgery

STUDY DESIGN

Observational study.

OBJECTIVE

The aim of this study was to evaluate the accuracy of a new frameless reference marker system for patient tracking by analyzing the effect of vertebral position within the surgical field.

SUMMARY OF BACKGROUND DATA

Most modern navigation systems for spine surgery rely on a dynamic reference frame attached to a vertebra for tracking the patient. This solution has the drawback of being bulky and obstructing the surgical field, while requiring that the dynamic reference frame is moved between vertebras to maintain accuracy.

METHODS

An augmented reality surgical navigation (ARSN) system with intraoperative cone beam computed tomography (CBCT) capability was installed in a hybrid operating room. The ARSN system used input from four video cameras for tracking adhesive skin markers placed around the surgical field. The frameless reference marker system was evaluated first in four human cadavers, and then in 20 patients undergoing navigated spine surgery. In each CBCT, the impact of vertebral position in the surgical field on technical accuracy was analyzed. The technical accuracy of the inserted pedicle devices was determined by measuring the distance between the planned position and the placed pedicle device, at the bone entry point.

RESULTS

The overall mean technical accuracy was 1.65 ± 1.24 mm at the bone entry point (n = 366). There was no statistically significant difference in technical accuracy between levels within CBCTs (P ≥ 0.12 for all comparisons). Linear regressions showed that null- to negligible parts of the effect on technical accuracy could be explained by the number of absolute levels away from the index vertebrae (r ≤ 0.007 for all, β ≤ 0.071 for all).

CONCLUSION

The frameless reference marker system based on adhesive skin markers is unobtrusive and affords the ARSN system a high accuracy throughout the navigated surgical field, independent of vertebral position.

LEVEL OF EVIDENCE

3.

The Role of Intraoperative Image Guidance Systems (Three-Dimensional C-arm versus O-arm) in Spinal Surgery: Results of a Single-Center Study

OBJECTIVE

Spinal dorsal instrumentation is an established treatment option for a range of spinal disorders. In combination with navigation, intraoperative fluoroscopy reduces the risk of incorrectly placing screws. This study aimed to evaluate the efficacy and validity of fluoroscopy (intraoperative navigation with three-dimensional rotation of C-arm vs. O-arm).

METHODS

In this retrospective single-center study, 240 patients were included between July 2017 and April 2020. Intraoperative images were acquired using a Siemens-Arcadis Orbic 3D C-arm with a navigation system (Brainlab, AG, Munich, Germany) or using O-arm (Medtronic, Minneapolis, Minnesota, USA) with a navigation system (S7 StealthStation). Finally, we compared mismatches between intraoperative and postoperative computed tomography imaging results using Rampersaud-grade (A-D).

RESULTS

A total of 1614 screws were included: 94 patients in the C-arm group (cAG) and 146 in the O-arm group (oAG). In cAG, 3% (n = 20) of the screws had to be replaced directly due to inadequate positioning with median or lateral breaches, and 3.5 % of screws in oAG (n = 35). An A-score was achieved for 85.7% in the cAG and 87.4% in the oAG. A B-score was found in 11.5% in the cAG and 11.9% in the oAG. In the cAG, a C-score was achieved for 2.5% and in oAG for 0.7%. For 0.3% of the screws, a D-score was found in cAG and for none in oAG.

CONCLUSIONS

Our study shows that placement of screws using intraoperative imaging in combination with a navigation tool is accurate. Furthermore, navigation coupled with the O-arm had significant advantages in accuracy over navigation with 3D C-arm fluoroscopy. However, both systems offer a high level of accuracy.

The state-of-the-art in ultrasound-guided spine interventions

During the last two decades, intra-operative ultrasound (iUS) imaging has been employed for various surgical procedures of the spine, including spinal fusion and needle injections. Accurate and efficient registration of pre-operative computed tomography or magnetic resonance images with iUS images are key elements in the success of iUS-based spine navigation. While widely investigated in research, iUS-based spine navigation has not yet been established in the clinic. This is due to several factors including the lack of a standard methodology for the assessment of accuracy, robustness, reliability, and usability of the registration method. To address these issues, we present a systematic review of the state-of-the-art techniques for iUS-guided registration in spinal image-guided surgery (IGS). The review follows a new taxonomy based on the four steps involved in the surgical workflow that include pre-processing, registration initialization, estimation of the required patient to image transformation, and a visualization process. We provide a detailed analysis of the measurements in terms of accuracy, robustness, reliability, and usability that need to be met during the evaluation of a spinal IGS framework. Although this review is focused on spinal navigation, we expect similar evaluation criteria to be relevant for other IGS applications.

Feasibility and accuracy of a robotic guidance system for navigated spine surgery in a hybrid operating room: a cadaver study

The combination of navigation and robotics in spine surgery has the potential to accurately identify and maintain bone entry position and planned trajectory. The goal of this study was to examine the feasibility, accuracy and efficacy of a new robot-guided system for semi-automated, minimally invasive, pedicle screw placement. A custom robotic arm was integrated into a hybrid operating room (OR) equipped with an augmented reality surgical navigation system (ARSN). The robot was mounted on the OR-table and used to assist in placing Jamshidi needles in 113 pedicles in four cadavers. The ARSN system was used for planning screw paths and directing the robot. The robot arm autonomously aligned with the planned screw trajectory, and the surgeon inserted the Jamshidi needle into the pedicle. Accuracy measurements were performed on verification cone beam computed tomographies with the planned paths superimposed. To provide a clinical grading according to the Gertzbein scale, pedicle screw diameters were simulated on the placed Jamshidi needles. A technical accuracy at bone entry point of 0.48 ± 0.44 mm and 0.68 ± 0.58 mm was achieved in the axial and sagittal views, respectively. The corresponding angular errors were 0.94 ± 0.83° and 0.87 ± 0.82°. The accuracy was statistically superior (p < 0.001) to ARSN without robotic assistance. Simulated pedicle screw grading resulted in a clinical accuracy of 100%. This study demonstrates that the use of a semi-automated surgical robot for pedicle screw placement provides an accuracy well above what is clinically acceptable.

Augmented reality navigation for spinal pedicle screw instrumentation using intraoperative 3D imaging

BACKGROUND CONTEXT

Due to recent developments in augmented reality with head-mounted devices, holograms of a surgical plan can be displayed directly in the surgeon's field of view. To the best of our knowledge, three dimensional (3D) intraoperative fluoroscopy has not been explored for the use with holographic navigation by head-mounted devices in spine surgery.

PURPOSE

To evaluate the surgical accuracy of holographic pedicle screw navigation by head-mounted device using 3D intraoperative fluoroscopy.

STUDY DESIGN

In this experimental cadaver study, the accuracy of surgical navigation using a head-mounted device was compared with navigation with a state-of-the-art pose-tracking system.

METHODS

Three lumbar cadaver spines were embedded in nontransparent agar gel, leaving only commonly visible anatomy in sight. Intraoperative registration of preoperative planning was achieved by 3D fluoroscopy and fiducial markers attached to lumbar vertebrae. Trackable custom-made drill sleeve guides enabled real-time navigation. In total, 20 K-wires were navigated into lumbar pedicles using AR-navigation, 10 K-wires by the state-of-the-art pose-tracking system. 3D models obtained from postexperimental CT scans were used to measure surgical accuracy. MF is the founder and shareholder of Incremed AG, a Balgrist University Hospital start-up focusing on the development of innovative techniques for surgical executions. The other authors declare no conflict of interest concerning the contents of this study. No external funding was received for this study.

RESULTS

No significant difference in accuracy was measured between AR-navigated drillings and the gold standard with pose-tracking system with mean translational errors between entry points (3D vector distance; p=.85) of 3.4±1.6 mm compared with 3.2±2.0 mm, and mean angular errors between trajectories (3D angle; p=.30) of 4.3°±2.3° compared with 3.5°±1.4°.

CONCLUSIONS

In conclusion, holographic navigation by use of a head-mounted device achieve accuracy comparable to the gold standard of high-end pose-tracking systems.

CLINICAL SIGNIFICANCE

These promising results could result in a new way of surgical navigation with minimal infrastructural requirements but now have to be confirmed in clinical studies.

Machine vision augmented reality for pedicle screw insertion during spine surgery

Implementing pedicle safe zones with augmented reality has the potential to improve operating room workflow during pedicle screw insertion. These safe zones will allow for image guidance when tracked instruments are unavailable. Using the correct screw trajectory as a reference angle for a successful screw insertion, we will determine the angles which lead to medial, lateral, superior and inferior breaches. These breaches serve as the boundaries of the safe zones. Measuring safe zones from the view of the surgical site and comparing to the radiological view will further understand the visual relationship between the radiological scans and the surgical site. Safe zones were measured on a spine phantom and were then replicated on patients. It was found that the largest causes for variance was between each of the camera views and the radiological views. The differences between the left and right cameras were insignificant. Overall, the camera angles appeared to be larger than the radiological angles. The magnification effect found in the surgical site result in an increased level of angle sensitivity for pedicle screw insertion techniques. By designing a virtual road map on top of the surgical site directly using tracked tools, the magnification effect is already taken into consideration during surgery. Future initiatives include the use of an augmented reality headset.

Optimization of virtual and real registration technology based on augmented reality in a surgical navigation system

Background

The traditional navigation interface was intended only for two-dimensional observation by doctors; thus, this interface does not display the total spatial information for the lesion area. Surgical navigation systems have become essential tools that enable for doctors to accurately and safely perform complex operations. The image navigation interface is separated from the operating area, and the doctor needs to switch the field of vision between the screen and the patient’s lesion area. In this paper, augmented reality (AR) technology was applied to spinal surgery to provide more intuitive information to surgeons. The accuracy of virtual and real registration was improved via research on AR technology. During the operation, the doctor could observe the AR image and the true shape of the internal spine through the skin.

Methods

To improve the accuracy of virtual and real registration, a virtual and real registration technique based on an improved identification method and robot-assisted method was proposed. The experimental method was optimized by using the improved identification method. X-ray images were used to verify the effectiveness of the puncture performed by the robot.

Results

The final experimental results show that the average accuracy of the virtual and real registration based on the general identification method was 9.73 ± 0.46 mm (range 8.90–10.23 mm). The average accuracy of the virtual and real registration based on the improved identification method was 3.54 ± 0.13 mm (range 3.36–3.73 mm). Compared with the virtual and real registration based on the general identification method, the accuracy was improved by approximately 65%. The highest accuracy of the virtual and real registration based on the robot-assisted method was 2.39 mm. The accuracy was improved by approximately 28.5% based on the improved identification method.

Conclusion

The experimental results show that the two optimized methods are highly very effective. The proposed AR navigation system has high accuracy and stability. This system may have value in future spinal surgeries.

[Relevance of spinal navigation in reconstructive surgery of the cervical spine]

BACKGROUND

Spinal navigation has made significant advances in the last two decades. After initial experiences with pedicle screws in the thoracic and lumbar spine, technological improvements have resulted in their increased application in the cervical spine. Instrumentation techniques like cervical pedicle screws, lateral mass screws in C1 and transarticular screws C1/C2 have become standard due to the application of image guidance.

TECHNIQUE

Different navigation techniques can be distinguished based on the type of imaging. In the cervical spine, the preoperative computer tomography (CT) scan that requires intraoperative matching is still the standard of care due to the high image quality. 3D fluoroscopy navigation techniques are currently widely used in the lumbar spine, but the reduced image quality obviates the application in the more sophisticated cervical anatomy or the cervicothoracic region. The future availability of intraoperative CT scans (iCT) combines the advantages of high image quality with those of intraoperative image acquisition. This will lead to a wider use of image guidance in the cervical spine and will enable the surgeon to apply minimally invasive techniques with higher accuracy.

APPLICATION

The successful application of spinal navigation is based on the technical knowledge of navigation systems and its exercise in daily routine. Only the sufficient experience of the clinical staff makes it possible to standardize operational procedures to increase patient safety, reduce radiation dose and shorten operation time.

Augmented and Virtual Reality Instrument Tracking for Minimally Invasive Spine Surgery: A Feasibility and Accuracy Study

STUDY DESIGN

Cadaveric animal laboratory study.

OBJECTIVE

To evaluate the feasibility and accuracy of pedicle cannulation using an augmented reality surgical navigation (ARSN) system with automatic instrument tracking, yielding feedback of instrument position in relation to deep anatomy.

SUMMARY OF BACKGROUND DATA

Minimally invasive spine surgery (MISS) has the possibility of reducing surgical exposure resulting in shorter hospital stays, lower blood loss and infection rates compared with open surgery but the drawback of limiting visual feedback to the surgeon regarding deep anatomy. MISS is mainly performed using image-guided 2D fluoroscopy, thus exposing the staff to ionizing radiation.

METHODS

A hybrid operating room (OR) equipped with a robotic C-arm with integrated optical cameras for augmented reality instrument navigation was used. In two pig cadavers, cone beam computed tomography (CBCT) scans were performed, a 3D model generated, and pedicle screw insertions were planned. Seventy-eight insertions were performed. Technical accuracy was assessed on post-insertion CBCTs by measuring the distance between the navigated device and the corresponding pre-planned path as well as the angular deviations. Drilling and hammering into the pedicle were also compared. Navigation time was measured. An independent reviewer assessed a simulated clinical accuracy according to Gertzbein.

RESULTS

The technical accuracy was 1.7 ± 1.0 mm at the bone entry point and 2.0 ± 1.3 mm at the device tip. The angular deviation was 1.7 ± 1.7° in the axial and 1.6 ± 1.2° in the sagittal plane. Navigation time per insertion was 195 ± 93 seconds. There was no difference in accuracy between hammering and drilling into the pedicle. The clinical accuracy was 97.4% to 100% depending on the screw size considered for placement. No ionizing radiation was used during navigation.

CONCLUSION

ARSN with instrument tracking for MISS is feasible, accurate, and radiation-free during navigation.

LEVEL OF EVIDENCE

3.

Optical Topographic Imaging for Spinal Intraoperative 3-Dimensional Navigation in the Cervical Spine: Initial Preclinical and Clinical Feasibility

OF BACKGROUND DATA

Computer-assisted 3-dimensional navigation may guide spinal instrumentation. Optical topographic imaging (OTI) is a novel navigation technique offering comparable accuracy and significantly faster registration workflow relative to current navigation systems. It has previously been validated in open posterior thoracolumbar exposures.

OBJECTIVE

To validate the utility and accuracy of OTI in the cervical spine.

STUDY DESIGN

This is a prospective preclinical cadaveric and clinical cohort study.

METHODS

Standard midline open posterior cervical exposures were performed, with segmental OTI registration at each vertebral level. In cadaveric testing, OTI navigation guidance was used to track a drill guide for cannulating screw tracts in the lateral mass at C1, pars at C2, lateral mass at C3-6, and pedicle at C7. In clinical testing, translaminar screws at C2 were also analyzed in addition. Planned navigation trajectories were compared with screw positions on postoperative computed tomographic imaging, and quantitative navigation accuracies, in the form of absolute translational and angular deviations, were computed.

RESULTS

In cadaveric testing (mean±SD) axial and sagittal translational navigation errors were (1.66±1.18 mm) and (2.08±2.21 mm), whereas axial and sagittal angular errors were (4.11±3.79 degrees) and (6.96±5.40 degrees), respectively.In clinical validation (mean±SD) axial and sagittal translational errors were (1.92±1.37 mm) and (1.27±0.97 mm), whereas axial and sagittal angular errors were (3.68±2.59 degrees) and (3.47±2.93 degrees), respectively. These results are comparable to those achieved with OTI in open thoracolumbar approaches, as well as using current spinal neuronavigation systems in similar applications. There was no radiographic facet, canal or foraminal violations, nor any neurovascular complications.

CONCLUSIONS

OTI is a novel navigation technique allowing efficient initial and repeat registration. Accuracy even in the more mobile cervical spine is comparable to current spinal neuronavigation systems.

Intraoperative Error Propagation in 3-Dimensional Spinal Navigation From Nonsegmental Registration: A Prospective Cadaveric and Clinical Study

STUDY DESIGN

Prospective pre-clinical and clinical cohort study.

OBJECTIVES

Current spinal navigation systems rely on a dynamic reference frame (DRF) for image-to-patient registration and tool tracking. Working distant to a DRF may generate inaccuracy. Here we quantitate predictors of navigation error as a function of distance from the registered vertebral level, and from intersegmental mobility due to surgical manipulation and patient respiration.

METHODS

Navigation errors from working distant to the registered level, and from surgical manipulation, were quantified in 4 human cadavers. The 3-dimensional (3D) position of a tracked tool tip at 0 to 5 levels from the DRF, and during targeting of pedicle screw tracts, was captured in real-time by an optical navigation system. Respiration-induced vertebral motion was quantified from 10 clinical cases of open posterior instrumentation. The 3D position of a custom spinous-process clamp was tracked over 12 respiratory cycles.

RESULTS

An increase in mean 3D navigation error of ≥2 mm was observed at ≥2 levels from the DRF in the cervical and lumbar spine. Mean ± SD displacement due to surgical manipulation was 1.55 ± 1.13 mm in 3D across all levels, ≥2 mm in 17.4%, 19.2%, and 38.5% of levels in the cervical, thoracic, and lumbar spine, respectively. Mean ± SD respiration-induced 3D motion was 1.96 ± 1.32 mm, greatest in the lower thoracic spine (P < .001). Tidal volume and positive end-expiratory pressure correlated positively with increased vertebral displacement.

CONCLUSIONS

Vertebral motion is unaccounted for during image-guided surgery when performed at levels distant from the DRF. Navigating instrumentation within 2 levels of the DRF likely minimizes the risk of navigation error.

[Spinal navigation for posterior cervical and cervicothoracic instrumentation]

OBJECTIVE

Safe placement of posterior cervical or high-thoracic pedicle screws, transarticular screws C1/2, translaminar screws C2 or cervical lateral mass screws under the guidance of spinal navigation.

INDICATIONS

All posterior cervical and cervicothoracic instrumentation with screws: instabilities and deformities of rheumatoid, traumatic, neoplastic, infectious, iatrogenic or congenital origin; multilevel cervical spinal stenosis with degenerative instability or kyphosis of the affected spinal segment.

CONTRAINDICATIONS

There are no absolute contraindications.

SURGICAL TECHNIQUE

Prone position on a gel mattress, rigid head fixation, e.g., with Mayfield tongs; if appropriate, closed reduction under lateral image intensification; midline posterior surgical approach at the level of the segments to be instrumented; if necessary, open reduction; insertion of the cervical/upper thoracic screws under the guidance of spinal navigation; if necessary, posterior decompression; instrumentation longitudinal rods; if a fusion is to be obtained, decortication of the posterior bone elements with a high-speed burr and onlay of cancellous bone or bone substitutes.

POSTOPERATIVE MANAGEMENT

In stable instrumentation, no postoperative immobilization with cervical collar is necessary. Drain removal on postoperative day 2-3, suture removal on postoperative day 14, clinical and x‑ray control 3 and 12 months after surgery or in case of clinical or neurological deterioration.

RESULTS

Numerous studies showed that the use of spinal navigation reduces implant malplacement rates significantly. Furthermore, it allows a reduction of the radiation dose for the operation team up to 90%.

High Speed, High Density Intraoperative 3D Optical Topographical Imaging with Efficient Registration to MRI and CT for Craniospinal Surgical Navigation

Intraoperative image-guided surgical navigation for craniospinal procedures has significantly improved accuracy by providing an avenue for the surgeon to visualize underlying internal structures corresponding to the exposed surface anatomy. Despite the obvious benefits of surgical navigation, surgeon adoption remains relatively low due to long setup and registration times, steep learning curves, and workflow disruptions. We introduce an experimental navigation system utilizing optical topographical imaging (OTI) to acquire the 3D surface anatomy of the surgical cavity, enabling visualization of internal structures relative to exposed surface anatomy from registered preoperative images. Our OTI approach includes near instantaneous and accurate optical measurement of >250,000 surface points, computed at >52,000 points-per-second for considerably faster patient registration than commercially available benchmark systems without compromising spatial accuracy. Our experience of 171 human craniospinal surgical procedures, demonstrated significant workflow improvement (41 s vs. 258 s and 794 s, p < 0.05) relative to benchmark navigation systems without compromising surgical accuracy. Our advancements provide the cornerstone for widespread adoption of image guidance technologies for faster and safer surgeries without intraoperative CT or MRI scans. This work represents a major workflow improvement for navigated craniospinal procedures with possible extension to other image-guided applications.

Feasibility and Accuracy of Thoracolumbar Minimally Invasive Pedicle Screw Placement With Augmented Reality Navigation Technology

STUDY DESIGN

Cadaveric laboratory study.

OBJECTIVE

To assess the feasibility and accuracy of minimally invasive thoracolumbar pedicle screw placement using augmented reality (AR) surgical navigation.

SUMMARY OF BACKGROUND DATA

Minimally invasive spine (MIS) surgery has increasingly become the method of choice for a wide variety of spine pathologies. Navigation technology based on AR has been shown to be feasible, accurate, and safe in open procedures. AR technology may also be used for MIS surgery.

METHODS

The AR surgical navigation was installed in a hybrid operating room (OR). The hybrid OR includes a surgical table, a motorized flat detector C-arm with intraoperative 2D/3D imaging capabilities, integrated optical cameras for AR navigation, and patient motion tracking using optical markers on the skin. Navigation and screw placement was without any x-ray guidance. Two neurosurgeons placed 66 Jamshidi needles (two cadavers) and 18 cannulated pedicle screws (one cadaver) in the thoracolumbar spine. Technical accuracy was evaluated by measuring the distance between the tip of the actual needle position and the corresponding planned path as well as the angles between the needle and the desired path. Time needed for navigation along the virtual planned path was measured. An independent reviewer assessed the postoperative scans for the pedicle screws' clinical accuracy.

RESULTS

Navigation time per insertion was 90 ± 53 seconds with an accuracy of 2.2 ± 1.3 mm. Accuracy was not dependent on operator. There was no correlation between navigation time and accuracy. The mean error angle between the Jamshidi needles and planned paths was 0.9° ± 0.8°. No screw was misplaced outside the pedicle. Two screws breached 2 to 4 mm yielding an overall accuracy of 89% (16/18).

CONCLUSION

MIS screw placement directed by AR with intraoperative 3D imaging in a hybrid OR is accurate and efficient, without any fluoroscopy or x-ray imaging during the procedure.

LEVEL OF EVIDENCE

N/A.