The C-Terminal Arm of the Human Papillomavirus Major Capsid Protein Is Immunogenic and Involved in Virus-Host Interaction

A Single-Sector Higher Throughput Sedimentation Velocity Analytical Ultracentrifugation Method for Recombinant Adeno-Associated Virus Empty and Full Ratio Analysis

Recombinant adeno-associated virus (rAAV) has emerged as one of the most important gene delivery vectors in the field of gene therapy due to its unique advantages and characteristics. The empty and full ratio is a critical quality attribute in the quality control (QC) of rAAV, and its accurate evaluation is crucial for ensuring the safety, effectiveness, and consistency of gene therapy products. Analytical ultracentrifugation (AUC) technology, with its high resolution and accuracy, is widely recognized by the industry as the gold standard for identifying the empty and full ratio of rAAV. However, the conventional sedimentation velocity analytical ultracentrifugation (SV-AUC) method has limited throughput, failing to meet the large-scale detection needs of rAAV in process development and QC. This study aims to develop a single-sector higher throughput SV-AUC method without the need for a reference sector for blank control in order to improve the throughput of detecting the empty and full ratio of rAAV vectors. We optimized the traditional double-sector SV-AUC method, which requires a reference sector for blank control in the cell. By converting the light intensity data of AUC into pseudo-absorbance data, we significantly improve the analytical throughput. By tracking the variation of light intensity data with radius, we could clearly observe the sedimentation process of the rAAV sample. Despite a difference in the absolute value of pseudo-absorbance, the accurately fitted relative absorbance value and the traditional SV-AUC absorbance value with blank control were comparable, further verifying the applicability of this upgraded rAAV analytical method. The detailed comparison and verification between the upgraded method and the traditional SV-AUC method showed that the consistency and repeatability of the percentage and sedimentation coefficient were excellent both within the same cell and across different cells. The analysis results of samples from seven independent cells with a total of 14 sectors showed that the overall data exhibited good repeatability. The consistency of the high percentage empty capsid (HE) samples repeatability results was good, and the overlay of the C(s) distribution diagram also showed good pattern consistency. The relative standard deviation of the average percentage of empty, partial, and full capsids was maintained within 5%. The upgraded method demonstrated excellent consistency and repeatability in the analysis of rAAV samples with different empty and full ratios, aligning closely with the data obtained with the traditional SV-AUC method, the gold standard. Linear correlation analysis between the titers of HE samples and the overall absorbance (A value) of AUC, as well as the absorbance of empty, partial, and full capsids, revealed a good linear relationship, further confirming the applicability and reliability of the upgraded AUC method for evaluating rAAV samples with different titers. We also preliminarily explored the robustness of this method and found that even in the presence of slight fluctuations in sample volume, the test results remained stable, effectively alleviating concerns about the impact of inaccurate sample volume on the results. By dropping ink to simulate window contamination or wear, it was found that although the peak shape of the C(s) distribution was affected, the ratio results were consistent with those of the traditional SV-AUC method, proving that the new method exhibits good anti-interference ability under varying testing conditions. We conducted a comparability study on rAAV samples containing different proportions of empty, partial, and full capsids. rAAV samples with different proportions of empty and full showed high consistency and repeatability in the results obtained from both methods. In summary, the single-sector higher throughput SV-AUC method without a reference sector for blank control proposed in this study not only improves the analysis efficiency of rAAV samples but also ensures the accuracy and precision of the results, providing a new reliable analysis tool with higher throughput for gene therapy. This technology is expected to accelerate the development and evaluation process of gene therapy products.

HPV16 neutralizing monoclonal antibodies show evidence for common developmental pathways and public epitopes

Antibodies to human papillomavirus (HPV) primarily recognize surface exposed residues on five loops of the major capsid protein (L1) that vary significantly among HPV types. We determined which loops were required for neutralization for 70 HPV16 specific human monoclonal antibodies (mAbs) cloned from participants who received an HPV vaccine, and we describe molecular features of those antibodies. Chimeric HPV16 pseudovirus (cpsV), each having one surface loop bearing multiple amino acid substitutions, were used to determine neutralization specificity. The HPV16-FG-loop was the loop most frequently required for neutralization (44 of 70, 62.9%), however, all other surface loops were used for neutralization by multiple mAbs: HI (13, 18.6%), DE (15, 21.4%), EF (six, 8.6%), BC (four, 5.7%). Antibodies that required multiple loops were common (17, 24.3%). Three mAbs (4.3%) required sequences on the c-terminus of L1 and for another three mAbs the neutralization specificity could not be determined. Two types of mAbs appeared to be overrepresented: ten mAbs used V H 2-70 IGHV paired with V L λ1-40, having characteristic mutations in complementarity determining region two (CDRL2). Cryogenic electron microscopy (Cryo-EM) revealed that two of these antibodies bound five Fabs per pentamer interacting with all five L1-surface loops. The other type of mAbs that appeared to be overrepresented were ten mAbs using V H 4-34, seven of which also used D H 3-16*02 with conserved CDRH3 sequences. Cryo-EM for one of these mAbs, that required the FG-loop for neutralization, was shown to bind one Fab per pentamer at the apex, interacting with the DE- and FG-loops, with sequences of the Fab CDRH3 inserted between the DE- and FG-loops from two protomers. These two types of mAbs were found repeatedly in the four participants suggesting that these antibodies shared developmental pathways and bound to similar immunodominant epitopes on the virus.

Highlights

Most human mAbs recognized L1 surface loops but three of 70 recognized sequences on the C-terminal arm of L1Some antibodies induced by HPV vaccination follow shared developmental pathways. Human monoclonal antibodies using V H 2-70/V L λ1-40 were found in all participants and bound with at a stoichiometry of five Fabs per capsomer. Human monoclonal antibodies using the diversity gene segment D3-16*02 were found in all participants and one Fab was shown to bind with a stoichiometry of one Fab per capsomer.

In brief

A panel of 70 HPV16 specific human monoclonal antibodies (mAbs), cloned from memory B cells or plasmablasts following HPV vaccination, was characterized by determining the surface loops of the major capsid protein (L1) required for neutralization and examined for shared molecular features. All five L1 loops were found to be used for neutralization by one or more antibodies, but the most frequent target of these antibodies was the FG loop followed by the HI and DE loops. Ten antibodies paired the heavy chain variable gene V H 2-70 with the light chain variable gene V L λ1-40 and these antibodies had conserved mutations in the CDRL2 region of V L λ1-40. Mutating the CDRL2 back to the predicted germline sequence significantly reduced neutralization. Cryo-EM analysis of two V H 2-70/V L λ1-40 mAbs showed five Fabs binding per L1 pentamer and a conserved epitope with Fabs interacting with all five variable loops across two adjacent protomers. Seven other mAbs had a heavy chain composed of the variable region V H 4-34 with the diversity gene D3-16*02 resulting in the sequence motif WSGYR in the CDRH3. Mutation of that sequence to alanine ablated HPV16 neutralization activity. A cryo-EM structure of one of these antibodies showed one Fab binding the pentamer apex with the WSGYR motif inserting between three loops from two protomers. Antibodies with paired V H 2-70/V L λ1-40 and the antibodies with CDRH3 containing the WSGYR sequence, were found in all four study participants suggesting that such antibodies may be commonly elicited following HPV vaccination.

Engineering Escherichia coli-Derived Nanoparticles for Vaccine Development

The development of effective vaccines necessitates a delicate balance between maximizing immunogenicity and minimizing safety concerns. Subunit vaccines, while generally considered safe, often fail to elicit robust and durable immune responses. Nanotechnology presents a promising approach to address this dilemma, enabling subunit antigens to mimic critical aspects of native pathogens, such as nanoscale dimensions, geometry, and highly repetitive antigen display. Various expression systems, including Escherichia coli (E. coli), yeast, baculovirus/insect cells, and Chinese hamster ovary (CHO) cells, have been explored for the production of nanoparticle vaccines. Among these, E. coli stands out due to its cost-effectiveness, scalability, rapid production cycle, and high yields. However, the E. coli manufacturing platform faces challenges related to its unfavorable redox environment for disulfide bond formation, lack of post-translational modifications, and difficulties in achieving proper protein folding. This review focuses on molecular and protein engineering strategies to enhance protein solubility in E. coli and facilitate the in vitro reassembly of virus-like particles (VLPs). We also discuss approaches for antigen display on nanocarrier surfaces and methods to stabilize these carriers. These bioengineering approaches, in combination with advanced nanocarrier design, hold significant potential for developing highly effective and affordable E. coli-derived nanovaccines, paving the way for improved protection against a wide range of infectious diseases.

Structural biology of the human papillomavirus

Human papillomavirus (HPV), known for its oncogenic properties, is the primary cause of cervical cancer and significantly contributes to mortality rates. It also plays a considerable role in the globally rising incidences of head and neck cancers. These cancers pose a substantial health burden worldwide. Current limitations in diagnostic and treatment strategies, along with inadequate coverage of preventive vaccines in low- and middle-income countries, hinder the progress toward the World Health Organization (WHO) HPV prevention and control targets set for 2030. In response to these challenges, extensive research in structural virology has explored the properties of HPV proteins, yielding crucial insights into the mechanisms of HPV infection that are important for the development of prevention and therapeutic strategies. This review highlights recent advances in understanding the structures of HPV proteins and discusses achievements and future opportunities for HPV vaccine development.

Characterization of a triple-type chimeric vaccine against human papillomavirus types 18, 45, and 59

Persistent infection with high-risk human papillomavirus (HPV) types can lead to the development of cancer in HPV-infected tissues, including the cervix, oropharynx, anus, penis, vagina, and vulva. While current HPV vaccines cover approximately 90 % of cervical cancers, nearly 10 % of cases associated with HPV types not included in the vaccines remain unaddressed, notably HPV59. This study describes the development of a chimeric virus-like particle (VLP) targeting HPV18/45/59, proposed as a vaccine candidate for high-risk HPV type (HPV59) currently lacking commercial vaccines. Given that the majority of neutralizing antibody epitopes are located on the surface loops, we engineered a strategic swap of these loops between the closely related HPV18 and HPV45. This methodology was then extended to incorporate surface loops of HPV59, resulting in the lead candidate construct of the H18-45BCEF-59HI chimeric VLP with two surface loops swapping from HPV45 to HPV18. Characterization confirmed that H18-45BCEF-59HI closely resembled the wild-type (WT) backbone types in particle size and morphology, as verified by Transmission Electron Microscopy (TEM), High-Performance Size-Exclusion Chromatography (HPSEC), and Analytical Ultracentrifugation (AUC), and demonstrated similar thermal stability as evidenced by Differential Scanning Calorimetry (DSC). Immunization studies in mice with the chimeric VLPs assessed their immunogenicity, revealing that the H18-45EF-59HI chimeric VLP exhibited optimal cross-neutralization. Additionally, when produced in a Good Manufacturing Practice (GMP)-like facility, the H18-45BCEF-59HI VLP was selected as a promising vaccine candidate for the prevention of HPV18/45/59 infection. This study not only offers a potential solution to the current vaccination gap but also provides a foundational approach for the design of vaccines targeting viruses with multiple subtypes or variants.

Current status and future directions for the development of human papillomavirus vaccines

The development of human papillomavirus (HPV) vaccines has made substantive progress, as represented by the approval of five prophylactic vaccines since 2006. Generally, the deployment of prophylactic HPV vaccines is effective in preventing newly acquired infections and incidences of HPV-related malignancies. However, there is still a long way to go regarding the prevention of all HPV infections and the eradication of established HPV infections, as well as the subsequent progression to cancer. Optimizing prophylactic HPV vaccines by incorporating L1 proteins from more HPV subtypes, exploring adjuvants that reinforce cellular immune responses to eradicate HPV-infected cells, and developing therapeutic HPV vaccines used either alone or in combination with other cancer therapeutic modalities might bring about a new era getting closer to the vision to get rid of HPV infection and related diseases. Herein, we summarize strategies for the development of HPV vaccines, both prophylactic and therapeutic, with an emphasis on the selection of antigens and adjuvants, as well as implications for vaccine efficacy based on preclinical studies and clinical trials. Additionally, we outline current cutting-edge insights on formulation strategies, dosing schedules, and age expansion among HPV vaccine recipients, which might play important roles in addressing barriers to vaccine uptake, such as vaccine hesitancy and vaccine availability.

Rational design of a cross-type HPV vaccine through immunodominance shift guided by a cross-neutralizing antibody

In vaccine development, broadly or cross-type neutralizing antibodies (bnAbs or cnAbs) are frequently targeted to enhance protection. Utilizing immunodominant antibodies could help fine-tune vaccine immunogenicity and augment the precision of immunization strategies. However, the methodologies to capitalize on the attributes of bnAbs in vaccine design have not been clearly elucidated. In this study, we discovered a cross-type neutralizing monoclonal antibody, 13H5, against human papillomavirus 6 (HPV6) and HPV11. This nAb exhibited a marked preference for HPV6, demonstrating superior binding activity to virus-like particles (VLPs) and significantly higher prevalence in anti-HPV6 human serum as compared to HPV11 antiserum (90% vs. 31%). Through co-crystal structural analysis of the HPV6 L1 pentamer:13H5 complex, we delineated the epitope as spanning four segments of amino acids (Phe42-Ala47, Gly172-Asp173, Glu255-Val275, and Val337-Tyr351) on the L1 surface loops. Further interaction analysis and site-directed mutagenesis revealed that the Ser341 residue in the HPV6 HI loop plays a critical role in the interaction between 13H5 and L1. Substituting Ser341 with alanine, which is the residue type present in HPV11 L1, almost completely abolished binding activity to 13H5. By swapping amino acids in the HPV11 HI loop with corresponding residues in HPV6 L1 (Ser341, Thr338, and Thr339), we engineered chimeric HPV11-6HI VLPs. Remarkably, the chimeric HPV11-6HI VLPs shifted the high immunodominance of 13H5 from HPV6 to the engineered VLPs and yielded comparable neutralization titers for both HPV6 and HPV11 in mice and non-human primates. This approach paves the way for the design of broadly protective vaccines from antibodies within the main immunization reservoir.

Screening and identification of B cell epitope within the major capsid protein L1 of HPV 52, using monoclonal antibodies

The L1 protein of Human papillomavirus (HPV), the main capsid protein, induces the formation of neutralizing antibodies. In this study, HPV52 L1 protein was induced to be expressed. Monoclonal antibody (mAb) 6A7 against L1 protein were screened by cell fusion techniques. Western Blot and immunofluorescence assay (IFA) demonstrated the specificity of the mAb. The L1 protein was truncated for prokaryotic expression (N1∼N7) and Dot-ELISA showed that 6A7 recognized N3 (aa 200-350). The immunodominant regions were truncated again for expression, with 6A7 recognizing N6 (aa 251-305). The N6 proteins were further truncated and then were constructed an four-segment eukaryotic expression vector. IFA showed that 6A7 could recognize amino acid 262-279. Amino acid 262-279 was selected to be truncated into short peptides P1 and P2. Finally, Peptide-ELISA and Dot-ELISA showed that the epitope regions of mAb 6A7 were amino acid 262-273. The mAbs with defined epitopes can lay the foundation for the analysis of antigenic epitope characteristics and promote the development of epitope peptide vaccines.

Genetic diversity of HPV35 in Chad and the Central African Republic, two landlocked countries of Central Africa: A cross-sectional study

Human Papillomavirus (HPV)-35 accounts for up 10% of cervical cancers in Sub-Saharan Africa. We herein assessed the genetic diversity of HPV35 in HIV-negative women from Chad (identified as #CHAD) and HIV-infected men having sex with men (MSM) in the Central African Republic (CAR), identified as #CAR. Ten HPV35 DNA from self-collected genital secretions (n = 5) and anal margin samples (n = 5) obtained from women and MSM, respectively, were sequenced using the ABI PRISM® BigDye Sequencing technology. All but one HPV35 strains belonged to the A2 sublineage, and only #CAR5 belonged to A1. HPV35 from #CAR had higher L1 variability compared to #CHAD (mean number of mutations: 16 versus 6). L1 of #CAR5 showed a significant variability (2.29%), suggesting a possible intra-type divergence from HPV35H. Three (BC, DE, and EF) out of the 5 capsid loops domains remained totally conserved, while FG- and HI- loops of #CAR exhibited amino acid variations. #CAR5 also showed the highest LCR variability with a 16bp insertion at binding sites of the YY1. HPV35 from #CHAD exhibited the highest variability in E2 gene (P<0.05). E6 and E7 oncoproteins remained well conserved. There is a relative maintenance of a well conserved HPV35 A2 sublineage within heterosexual women in Chad and MSM with HIV in the Central African Republic.

Crystal Structures of Plk1 Polo-Box Domain Bound to the Human Papillomavirus Minor Capsid Protein L2-Derived Peptide

Human papillomaviruses (HPVs) can increase the proliferation of infected cells during HPV-driven abnormalities, such as cervical cancer or benign warts. To date, more than 200 HPV genotypes have been identified, most of which are classified into three major genera: Alphapapillomavirus, Betapapillomavirus, and Gammapapillomavirus. HPV genomes commonly encode two structural (L1 and L2) and seven functional (E1, E2, E4-E7, and E8) proteins. L2, the minor structural protein of HPVs, not only serves as a viral capsid component but also interacts with various human proteins during viral infection. A recent report revealed that L2 of HPV16 recruits polo-like kinase 1 (Plk1), a master regulator of eukaryotic mitosis and cell cycle progression, for the delivery of viral DNA to mitotic chromatin during HPV16 infection. In this study, we verified the direct and potent interactions between the polo-box domain (PBD) of Plk1 and PBD-binding motif (S-S-pT-P)-containing phosphopeptides derived from L2 of HPV16/HPV18 (high-risk alphapapillomaviruses), HPV5b (low-risk betapapillomavirus), and HPV4 (low-risk gammapapillomavirus). Subsequent structural determination of the Plk1 PBD bound to the HPV18 or HPV4 L2-derived phosphopeptide demonstrated that they interact with each other in a canonical manner, in which electrostatic interactions and hydrogen bonds play key roles in sustaining the complex. Therefore, our structural and biochemical data imply that Plk1 is a broad binding target of L2 of various HPV genotypes belonging to the Alpha-, Beta-, and Gammapapillomavirus genera.

Viral Capsid Change upon Encapsulation of Double-Stranded DNA into an Infectious Hypodermal and Hematopoietic Necrosis Virus-like Particle

In this study, we aimed to encapsulate the sizable double-stranded DNA (dsDNA, 3.9 kbp) into a small-sized infectious hypodermal and hematopoietic necrosis virus-like particle (IHHNV-VLP; T = 1) and compared the changes in capsid structure between dsDNA-filled VLP and empty VLP. Based on our encapsulation protocol, IHHNV-VLP was able to load dsDNA at an efficiency of 30-40% (w/w) into its cavity. Structural analysis revealed two subclasses of IHHNV-VLP, so-called empty and dsDNA-filled VLPs. The three-dimensional (3D) structure of the empty VLP produced in E. coli was similar to that of the empty IHHNV-VLP produced in Sf9 insect cells. The size of the dsDNA-filled VLP was slightly bigger (50 Å) than its empty VLP counterpart; however, the capsid structure was drastically altered. The capsid was about 1.5-fold thicker due to the thickening of the capsid interior, presumably from DNA-capsid interaction evident from capsid protrusions or nodules on the interior surface. In addition, the morphological changes of the capsid exterior were particularly observed in the vicinity of the five-fold axes, where the counter-clockwise twisting of the "tripod" structure at the vertex of the five-fold channel was evident, resulting in a widening of the channel's opening. Whether these capsid changes are similar to virion capsid maturation in the host cells remains to be investigated. Nevertheless, the ability of IHHNV-VLP to encapsulate the sizable dsDNA has opened up the opportunity to package a dsDNA vector that can insert exogenous genes and target susceptible shrimp cells in order to halt viral infection.

A bacterially expressed triple-type chimeric vaccine against human papillomavirus types 51, 69, and 26

Persistent infection of high-risk human papillomavirus (HPV) is a leading cause of some cancers, including cervical cancer. However, with over 20 carcinogenic HPV types, it is difficult to design a multivalent vaccine that can offer complete protection. Here, we describe the design and optimization of a HPV51/69/26 triple-type chimeric virus-like particle (VLP) for vaccine development. Using E. coli and a serial N-terminal truncation strategy, we created double- and triple-type chimeric VLPs through loop-swapping at equivalent surface loops. The lead candidate, H69-51BC-26FG, conferred similar particulate properties as that of its parental VLPs and comparable immunogenicity against HPV51, -69 and -26. When produced in a GMP-like facility, these H69-51BC-26FG VLPs were verified to have excellent qualities for the development of a multivalent HPV vaccine. This study showcases an amenable way to create a single VLP using type-specific epitope clustering for the design of a triple-type vaccine.

Innovative vaccine platforms against infectious diseases: Under the scope of the COVID-19 pandemic

While classic vaccines have proved greatly efficacious in eliminating serious infectious diseases, innovative vaccine platforms open a new pathway to overcome dangerous pandemics via the development of safe and effective formulations. Such platforms play a key role either as antigen delivery systems or as immune-stimulators that induce both innate and adaptive immune responses. Liposomes or lipid nanoparticles, virus-like particles, nanoemulsions, polymeric or inorganic nanoparticles, as well as viral vectors, all belong to the nanoscale and are the main categories of innovative vaccines that are currently on the market or in clinical and preclinical phases. In this paper, we review the above formulations used in vaccinology and we discuss their connection with the development of safe and effective prophylactic vaccines against SARS-CoV-2.

Structural basis for the shared neutralization mechanism of three classes of human papillomavirus type 58 antibodies with disparate modes of binding

Human papillomavirus type 58 (HPV58) is associated with cervical cancer and poses a significant health burden worldwide. Although the commercial 9-valent HPV vaccine covers HPV58, the structural and molecular-level neutralization sites of the HPV58 complete virion are not fully understood. Here, we report the high-resolution (∼3.5 Å) structure of the complete HPV58 pseudovirus (PsV58) using cryo-electron microscopy (cryo-EM). Three representative neutralizing monoclonal antibodies (nAbs 5G9, 2H3 and A4B4) were selected through clustering from a nAb panel against HPV58. Bypassing the steric hindrance and symmetry-mismatch in the HPV Fab-capsid immune-complex, we present three different neutralizing epitopes in the PsV58, and show that, despite differences in binding, these nAbs share a common neutralization mechanism. These results offer insight into HPV58 genotype specificity and broaden our understanding of HPV58 neutralization sites for antiviral research.IMPORTANCE Cervical cancer primarily results from persistent infection with high-risk types of human papillomavirus (HPV). HPV type 58 (HPV58) is an important causative agent, especially within Asia. Despite this, we still have limited data pertaining to the structural and neutralizing epitopes of HPV58, and this encumbers our in-depth understanding of the virus mode of infection. Here, we show that representative nAbs (5G9, 10B11, 2H3, 5H2 and A4B4) from three different groups share a common neutralization mechanism that appears to prohibit the virus from associating with the extracellular matrix and cell surface. Furthermore, we identify that the nAbs engage via three different binding patterns: top-center binding (5G9 and 10B11), top-fringe binding (2H3 and 5H2), and fringe binding (A4B4). Our work shows that, despite differences in the pattern in binding, nAbs against HPV58 share a common neutralization mechanism. These results provide new insight into the understanding of HPV58 infection.

Development of immunogenic chimeric virus-like particles based on bovine papillomavirus type 6

Virus-like particles (VLPs) are considered useful tools for vaccine development because they induce an immune response and are safe. In addition, VLPs may be useful as a platform for the presentation of foreign antigens to elicit immune responses. In this study, we aimed to produce a chimeric VLP composed of L1 protein of bovine papillomavirus type 6 (BPV6-L1) that can display an entire foreign protein on its surface. Based on prediction of the conformational structure of VLP of BPV6-L1 (BPV6-VLP), candidate insertion sites for the foreign protein into BPV6-VLP were identified. Fusion proteins of BPV6-L1 and EGFP as a model foreign protein were constructed and produced. Only the fusion protein in which EGFP was inserted between amino acids 136 and 137 of BPV6-L1 self-assembled into VLPs and did not exhibit hindrance of the conformation of EGFP. Chimeric BPV6-VLP-immunized mice produced specific IgG against both BPV6 and EGFP. This is the first demonstration of the production of an immunogenic, bivalent, chimeric BPV6-VLP incorporating an entire protein for stable surface display. Thus, immunogenic chimeric BPV6-VLP may constitute a promising vaccine platform.

Rational design of a multi-valent human papillomavirus vaccine by capsomere-hybrid co-assembly of virus-like particles

The capsid of human papillomavirus (HPV) spontaneously arranges into a T = 7 icosahedral particle with 72 L1 pentameric capsomeres associating via disulfide bonds between Cys175 and Cys428. Here, we design a capsomere-hybrid virus-like particle (chVLP) to accommodate multiple types of L1 pentamers by the reciprocal assembly of single C175A and C428A L1 mutants, either of which alone encumbers L1 pentamer particle self-assembly. We show that co-assembly between any pair of C175A and C428A mutants across at least nine HPV genotypes occurs at a preferred equal molar stoichiometry, irrespective of the type or number of L1 sequences. A nine-valent chVLP vaccine-formed through the structural clustering of HPV epitopes-confers neutralization titers that are comparable with that of Gardasil 9 and elicits minor cross-neutralizing antibodies against some heterologous HPV types. These findings may pave the way for a new vaccine design that targets multiple pathogenic variants or cancer cells bearing diverse neoantigens.

Neutralization sites of human papillomavirus-6 relate to virus attachment and entry phase in viral infection

Human papillomavirus type 6 (HPV6) is the major etiologic agent of genital warts and recurrent respiratory papillomatosis. Although the commercial HPV vaccines cover HPV6, the neutralization sites and mode for HPV6 are poorly understood. Here, we identify the HPV6 neutralization sites and discriminate the inhibition of virus attachment and entry by three potent neutralizing antibodies (nAbs), 5D3, 17D5, and 15F7. Mutagenesis assays showed that these nAbs predominantly target surface loops BC, DE, and FG of HPV6 L1. Cryo-EM structures of the HPV6 pseudovirus (PsV) and its immune complexes revealed three distinct binding modalities - full-occupation-bound to capsid, top-center-bound-, and top-rim-bound to pentamers - and illustrated a structural atlas for three classes of antibody-bound footprints that are located at center-distal ring, center, and center-proximal ring of pentamer surface for 5D3, 17D5, and 15F7, respectively. Two modes of neutralization were identified: mAb 5D3 and 17D5 block HPV PsV from attaching to the extracellular matrix (ECM) and the cell surface, whereas 15F7 allows PsV attachment but prohibits PsV from entering the cell. These findings highlight three neutralization sites of HPV6 L1 and outline two antibody-mediated neutralization mechanisms against HPV6, which will be relevant for HPV virology and antiviral inhibitor design. HighlightsMajor neutralization sites of HPV6 were mapped on the pseudovirus cryo-EM structuremAb 15F7 binds HPV6 capsid with a novel top-rim binding modality and confers a post-attachment neutralizationmAb 17D5 binds capsid in top-centre manner but unexpectedly prevents virus from attachment to cell surface.

Mechanisms Mediating Nuclear Trafficking Involved in Viral Propagation by DNA Viruses

Typical viral propagation involves sequential viral entry, uncoating, replication, gene transcription and protein synthesis, and virion assembly and release. Some viral proteins must be transported into host nucleus to facilitate viral propagation, which is essential for the production of mature virions. During the transport process, nuclear localization signals (NLSs) play an important role in guiding target proteins into nucleus through the nuclear pore. To date, some classical nuclear localization signals (cNLSs) and non-classical NLSs (ncNLSs) have been identified in a number of viral proteins. These proteins are involved in viral replication, expression regulation of viral genes and virion assembly. Moreover, other proteins are transported into nucleus with unknown mechanisms. This review highlights our current knowledge about the nuclear trafficking of cellular proteins associated with viral propagation.

The Underlying Mechanism of 3-Hydroxyphthalic Anhydride-Modified Bovine Beta-Lactoglobulin to Block Human Papillomavirus Entry Into the Host Cell

We have previously demonstrated that 3-hydroxyphthalic anhydride (3HP)-modified bovine beta-lactoglobulin (3HP-β-LG) is highly effective in inhibiting entry of pseudovirus (PsV) of high- and low-risk human papillomavirus (HPV) into the target cell. Intravaginally applied 3HP-β-LG-containing vaginal gel could significantly inhibit HPV infection and reduce viral load in the cervical region. However, we still do not understand the underlying molecular mechanism by which 3HP-β-LG is able to inhibit HPV infection. Here, though, we showed that 3HP-β-LG did not inactivate HPV PsV, but rather blocked entry of HPV PsV into the target cell via its interaction with virus, not cell. It bound to the positively charged region in the HPV L1 protein, suggesting that 3HP-β-LG binds to HPV L1 protein through the interaction between the negatively charged region in 3HP-β-LG and the positively charged region in HPV L1 protein, thus competitively blocking the binding of HPV to the receptor on the basement membrane in vaginal mucosa. Although 3HP-modified chicken ovalbumin (3HP-OVA) also carries high net negative charges, it exhibited no anti-HPV activity, suggesting that the interaction between 3HP-modified protein and HPV L1 protein relies on both electrostatic and matchable conformation of the binding sites in both proteins. When topically applied, 3HP-β-LG did not enter the host cell or blood circulation. These findings suggest that 3HP-β-LG targets HPV L1 protein and blocks HPV entry into the host cell, thus being safe and effective for topical application in the treatment of HPV infection.

Rational design of a triple-type human papillomavirus vaccine by compromising viral-type specificity

Sequence variability in surface-antigenic sites of pathogenic proteins is an important obstacle in vaccine development. Over 200 distinct genomic sequences have been identified for human papillomavirus (HPV), of which more than 18 are associated with cervical cancer. Here, based on the high structural similarity of L1 surface loops within a group of phylogenetically close HPV types, we design a triple-type chimera of HPV33/58/52 using loop swapping. The chimeric VLPs elicit neutralization titers comparable with a mix of the three wild-type VLPs both in mice and non-human primates. This engineered region of the chimeric protein recapitulates the conformational contours of the antigenic surfaces of the parental-type proteins, offering a basis for this high immunity. Our stratagem is equally successful in developing other triplet-type chimeras (HPV16/35/31, HPV56/66/53, HPV39/68/70, HPV18/45/59), paving the way for the development of an improved HPV prophylactic vaccine against all carcinogenic HPV strains. This technique may also be extrapolated to other microbes.

N-terminal truncations on L1 proteins of human papillomaviruses promote their soluble expression in Escherichia coli and self-assembly in vitro

Human papillomavirus (HPV) is the causative agent in genital warts and nearly all cervical, anogenital, and oropharyngeal cancers. Nine HPV types (6, 11, 16, 18, 31, 33, 45, 52, and 58) are associated with about 90% of cervical cancers and 90% of genital warts. HPV neutralization by vaccine-elicited neutralizing antibodies can block viral infection and prevent HPV-associated diseases. However, there is only one commercially available HPV vaccine, Gardasil 9, produced from Saccharomyces cerevisiae that covers all nine types, raising the need for microbial production of broad-spectrum HPV vaccines. Here, we investigated whether N-terminal truncations of the major HPV capsid proteins L1, improve their soluble expression in Escherichia coli. We found that N-terminal truncations promoted the soluble expression of HPV 33 (truncated by 10 amino acids [aa]), 52 (15 aa), and 58 (10 aa). The resultant HPV L1 proteins were purified in pentamer form and extensively characterized with biochemical, biophysical, and immunochemical methods. The pentamers self-assembled into virus-like particles (VLPs) in vitro, and 3D cryo-EM reconstructions revealed that all formed T = 7 icosahedral particles having 50–60-nm diameters. Moreover, we formulated a nine-valent HPV vaccine candidate with aluminum adjuvant and L1 VLPs from four genotypes used in this study and five from previous work. Immunogenicity assays in mice and non-human primates indicated that this HPV nine-valent vaccine candidate elicits neutralizing antibody titers comparable to those induced by Gardasil 9. Our study provides a method for producing a nine-valent HPV vaccine in E. coli and may inform strategies for the soluble expression of other vaccine candidates.

• N-terminal truncations promote the soluble expression of HPV L1 proteins in E. coli and their self-assembly of T = 7 icosahedral particle in vitro

• An HPV 9-valent vaccine candidate was formulated with E. coli-derived HPV 6, 11, 16, 18, 31, 33, 45, 52, and 58 VLPs, and conferred comparable immunogenicity with Gardasil 9

Crystal Structures of Two Immune Complexes Identify Determinants for Viral Infectivity and Type-Specific Neutralization of Human Papillomavirus

Persistent, high-risk human papillomavirus (HPV) infection is the primary cause of cervical cancer. Neutralizing antibodies elicited by L1-only virus-like particles (VLPs) can block HPV infection; however, the lack of high-resolution structures has limited our understanding of the mode of virus infection and the requirement for type specificity at the molecular level. Here, we describe two antibodies, A12A3 and 28F10, that specifically bind to and neutralize HPV58 and HPV59, respectively, through two distinct binding stoichiometries. We show that the epitopes of A12A3 are clustered in the DE loops of two adjacent HPV58 L1 monomers, whereas 28F10 recognizes the HPV59 FG loop of a single monomer. Via structure-based mutagenesis and analysis of antibody binding, we further identified the residues HPV58 D154, S168, and N170 and HPV59 M267, Q270, E273, Y276, K278, and R283, which play critical roles in virus infection. By substituting these strategic epitope residues into other HPV genotypes, we could then redirect the type-specific binding of the antibodies to these genotypes, thus highlighting the importance of these specific residues, HPV58 R161, S168, and N308 and HPV59 Q270, E273, and D281. Overall, our findings provide molecular insights into potential structural determinants of HPV required for infectivity and type specificity.

High-risk human papillomaviruses (HPVs) are considered the major causative pathogens of cancers that affect epithelial mucosa, such as cervical cancer. However, because of the lack of high-resolution structural information on the sites of neutralization, we have yet to determine the precise mode of HPV infection and how different types of HPV cause infection. Our crystal structures in this study have uncovered discrete binding stoichiometries for two different antibodies. We show that one A12A3 Fab binds to the center of one HPV58 pentamer, whereas five 28F10 Fabs bind along the top fringe of one HPV59 pentamer. Furthermore, through targeted epitope analysis, we show that 6 to 7 discontinuous residues of the L1 major capsid protein of HPV are determinants, at least in part, for virus infection and type specificity. This knowledge will help us to unravel the process of HPV infection and can potentially be used to drive the development of therapeutics that target neutralization-sensitive sites.

Human papillomavirus first and second generation vaccines-current status and future directions

It has been more than 10 years that the first prophylactic papillomavirus vaccine became available, although distribution has been mainly limited to the more affluent countries. The first two vaccines have been a great success, hundreds of millions of women and a much smaller number of men have been vaccinated ever since. In a few countries with high vaccination coverage, in particular Australia but also parts of Great Britain and others, clinical impact of vaccination programs is already visible and there are indications for herd immunity as well. Vaccine efficacy is higher than originally estimated and the vaccines have an excellent safety profile. Gardasil9 is a second generation HPV virus-like particle vaccine that was licensed in 2015 and there are more to come in the near future. Currently, burning questions in respect to HPV vaccination are the duration of protection - especially in regard to cross-protection - reduction of the three-dose regimen and its impact on cross-protection; and duration of response, as well as protection against oropharyngeal HPV infections. Furthermore, researchers are seeking to overcome limitations of the VLP vaccines, namely low thermal stability, cost, invasive administration, limited coverage of non-vaccine HPV types, and lack of therapeutic efficacy. In this review we summarize the current status of licensed VLP vaccines and address questions related to second and third generation HPV vaccines.

Characterization of an Escherichia coli-derived human papillomavirus type 16 and 18 bivalent vaccine

Human papillomavirus (HPV) types 16 and 18 account for approximately 70% of cervical cancer worldwide. Neutralizing HPV prophylactic vaccines offer significant benefit, as they block HPV infection and prevent subsequent disease. However, the three licensed HPV vaccines that cover these two genotypes were produced in eukaryotic cells, which is expensive, particularly for low-income countries where HPV is highest. Here, we report a new HPV16 and -18 bivalent candidate vaccine produced from Escherichia coli. We used two strategies of N-terminal truncation of HPV L1 proteins and soluble non-fusion expression to generate HPV16 and HPV18 L1-only virus-like particles (VLPs) in a scalable process. Through comprehensive characterization of the bivalent candidate vaccine, we confirm lot consistency in a pilot scale-up of 30L, 100L and 500L. Using cryo-EM 3D reconstruction, we found that HPV16 and -18VLPs present in a T=7 icosahedral arrangement, similar in shape and size to that of the native virions. This HPV16/18 bivalent vaccine shares comparable immunogenicity with the licensed vaccines. Overall, we show that the production of a HPV16/18 bivalent vaccine from an E. coli expression system is robust and scalable, with potentially good accessibility worldwide as a population-based immunization strategy.

Stop codon mutagenesis for homogenous expression of human papillomavirus L1 protein in Escherichia coli

Human papillomavirus (HPV) is widely accepted to be the major causative pathogen of cervical cancer, warts, and other epithelial tumors. Virus infection and subsequent disease development can be prevented by vaccination with HPV vaccines derived from eukaryotic expression systems. Here, we report the soluble expression of the major capsid protein L1 of HPV31, a dominant carcinogenic HPV genotype, in Escherichia coli. HPV31 L1 protein and its elongated form (L1+) were observed in SDS-PAGE and CE-SDS analysis, generated by the native HPV31 L1 gene with a TAA stop codon. Replacing the TAA with TAG but not TGA could completely terminate protein translation. Mass spectrometry sequencing showed that L1+ comprised L1 with a C-terminal extension of 38 amino acids (aa). RNA folding analysis revealed that the unfaithful L1+ expression may result from translational read-through, as TAG is more stable and accessible than the other stop codons. The 38-aa elongated fragment perturbs self-assembly of HPV31 L1+, as shown in size and morphology analyses. By 3D cryo-electron microscopy structure determination, we show self-assembly of purified HPV31 L1 (TAG) VLPs into T = 7 icosahedral symmetry particles, resembling the native HPV virion. Finally, through additional characterization and antigenicity/immunogenicity assays, we verified that the E.coli-derived HPV31 VLPs are an ideal immunogen for HPV vaccine development. Our findings outline a codon optimization stratagem for protein expression and provide a method for the in-depth investigation of prokaryotic translation regulation.

Escherichia coli-derived virus-like particles in vaccine development

Recombinant virus-like particle-based vaccines are composed of viral structural proteins and mimic authentic native viruses but are devoid of viral genetic materials. They are the active components in highly safe and effective vaccines for the prevention of infectious diseases. Several expression systems have been used for virus-like particle production, ranging from Escherichia coli to mammalian cell lines. The prokaryotic expression system, especially Escherichia coli, is the preferred expression host for producing vaccines for global use. Hecolin, the first licensed virus-like particle vaccine derived from Escherichia coli, has been demonstrated to possess good safety and high efficacy. In this review, we focus on Escherichia coli-derived virus-like particle based vaccines and vaccine candidates that are used for prevention (immunization against microbial pathogens) or disease treatment (directed against cancer or non-infectious diseases). The native-like spatial or higher-order structure is essential for the function of virus-like particles. Thus, the tool box for analyzing the key physicochemical, biochemical and functional attributes of purified virus-like particles will also be discussed. In summary, the Escherichia coli expression system has great potentials for producing a range of proteins with self-assembling properties to be used as vaccine antigens given the proper epitopes were preserved when compared to those in the native pathogens or disease-related target molecules.