Microwave assisted EDTA extraction—determination of pseudo total contents of distinct trace elements in solid environmental matrices

Soil fertilization with microalgae biomass from municipal wastewater treatment causes no additional leaching of dissolved macronutrients and trace elements in a column experiment

Microalgae are a promising bio-fertilizer that can be cultivated in municipal wastewater, where the organisms perform water purification by incorporation of nutrients and contaminants. Before bio-fertilization with wastewater-grown microalgae can be put into practice, its impact on the leaching of macronutrients and trace elements needs to be evaluated. Here, we studied the leaching behavior of a microalgae-fertilized soil against a control in column percolation setup. Microalgae were grown in real municipal wastewater supplemented with bromide for the analysis of within-cell Br- accumulation by time-of-flight secondary ion mass spectrometry. Dry biomass (45.0 g N kg-1 and 28.9 g P kg-1) was added to the topmost layer of the fertilized column at a level of 3 g biomass kg-1 on a whole soil basis. Column irrigation was equivalent to 3 years of precipitation in central Germany. The leaching of macronutrients and trace elements from the fertilized and control columns was largely identical. Except for P, depth profiles confirmed very low vertical translocation within the soil. This is held for total element contents as well as for operationally defined pools, suggesting that microalgae cultivated in municipal wastewater provide a slow-release fertilizer largely resistant to leaching. Mass spectrometric imaging gave clear evidence for bromide uptake by the microalgae, and pure cultures of the genus Scenedesmus showed that it was preferentially located in the cell membrane. Therefore, bromide could potentially be employed as a mineralization tracer in future studies on the use of microalgae as a bio-fertilizer.

Dissent in the sediment? Lake sediments as archives of short- and long-range impact of anthropogenic activities in northeastern Germany

The suitability of lake sediment cores to reconstruct past inputs, regional pollution, and usage patterns of pesticides has been shown previously. Until now, no such data exist for lakes in eastern Germany. Therefore, 10 sediment cores (length 1 m) of 10 lakes in eastern Germany, the territory of the former German Democratic Republic (GDR), were collected and cut into 5-10-mm layers. In each layer, concentrations of trace elements (TEs) As, Cd, Cr, Cu, Ni, Pb, S, and Zn, as well as of organochlorine pesticides (OCPs), i.e., dichlorodiphenyltrichloroethane (DDT) and hexachlorocyclohexane (HCH), were analyzed. A miniaturized solid-liquid extraction technique in conjunction with headspace solid-phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS) was used for the latter. The progression of TE concentrations over time is uniform. It follows a trans-regional pattern and is indicative of activity and policy making in West Germany before 1990 instead of those in the GDR. Of OCPs, only transformation products of DDT were found. Congener ratios indicate a mainly aerial input. In the lakes' profiles, several regional features and responses to national policies and measures are visible. Dichlorodiphenyldichloroethane (DDD) concentrations reflect the history of DDT use in the GDR. Lake sediments proved to be suitable to archive short- and long-range impacts of anthropogenic activity. Our data can be used to complement and validate other forms of environmental pollution long-term monitoring and to check for the efficiency of pollution countermeasures in the past.

Single-Locus and Multi-Locus Genome-Wide Association Studies Identify Genes Associated with Liver Cu Concentration in Merinoland Sheep

Economic losses due to copper intoxication or deficiency is a problem encountered by sheep farmers. The aim of this study was to investigate the ovine genome for genomic regions and candidate genes responsible for variability in liver copper concentration. Liver samples were collected from slaughtered lambs of the Merinoland breed from two farms, and used for measurement of copper concentration and genome-wide association study (GWAS). A total of 45,511 SNPs and 130 samples were finally used for analysis, in which single-locus and several multi-locus GWAS (SL-GWAS; ML-GWAS) methods were employed. Gene enrichment analysis was performed for identified candidate genes to detect gene ontology (GO) terms significantly associated with hepatic copper levels. The SL-GWAS and a minimum of two ML-GWAS identified two and thirteen significant SNPs, respectively. Within genomic regions surrounding identified SNPs, we observed nine promising candidate genes such as DYNC1I2, VPS35, SLC38A9 and CHMP1A. GO terms such as lysosomal membrane, mitochondrial inner membrane and sodium:proton antiporter activity were significantly enriched. Genes involved in these identified GO terms mediate multivesicular body (MVB) fusion with lysosome for degradation and control mitochondrial membrane permeability. This reveals the polygenic status of this trait and candidate genes for further studies on breeding for copper tolerance in sheep.

Soil Properties Correlate with Microbial Community Structure in Qatari Arid Soils

This is the first detailed characterization of the microbiota and chemistry of different arid habitats from the State of Qatar. Analysis of bacterial 16S rRNA gene sequences showed that in aggregate, the dominant microbial phyla were Actinobacteria (32.3%), Proteobacteria (24.8%), Firmicutes (20.7%), Bacteroidetes (6.3%), and Chloroflexi (3.6%), though individual soils varied widely in the relative abundances of these and other phyla. Alpha diversity measured using feature richness (operational taxonomic units [OTUs]), Shannon's entropy, and Faith's phylogenetic diversity (PD) varied significantly between habitats (P = 0.016, P = 0.016, and P = 0.015, respectively). Sand, clay, and silt were significantly correlated with microbial diversity. Highly significant negative correlations were also seen at the class level between both classes Actinobacteria and Thermoleophilia (phylum Actinobacteria) and total sodium (R = -0.82 and P = 0.001 and R = -0.86, P = 0.000, respectively) and slowly available sodium (R = -0.81 and P = 0.001 and R = -0.8 and P = 0.002, respectively). Additionally, class Actinobacteria also showed significant negative correlation with sodium/calcium ratio (R = -0.81 and P = 0.001). More work is needed to understand if there is a causal relationship between these soil chemical parameters and the relative abundances of these bacteria. IMPORTANCE Soil microbes perform a multitude of essential biological functions, including organic matter decomposition, nutrient cycling, and soil structure preservation. Qatar is one of the most hostile and fragile arid environments on earth and is expected to face a disproportionate impact of climate change in the coming years. Thus, it is critical to establish a baseline understanding of microbial community composition and to assess how soil edaphic factors correlate with microbial community composition in this region. Although some previous studies have quantified culturable microbes in specific Qatari habitats, this approach has serious limitations, as in environmental samples, approximately only 0.5% of cells are culturable. Hence, this method vastly underestimates natural diversity within these habitats. Our study is the first to systematically characterize the chemistry and total microbiota associated with different habitats present in the State of Qatar.

Analysis of Zinc and Chromium in Grain Samples Using Ionic Liquid-Based Ultrasound-Assisted Microextraction Followed by Flame-AAS After Microwave Digestion

A simple, rapid and eco-friendly microextraction method was developed for the determination and preconcentration of zinc (Zn) and chromium (Cr) from grain products by ultrasonic-assisted ionic liquid dispersive liquid-liquid microextraction (UA-IL-DLLME) combined with flame atomic absorption spectrometry (FAAS). Quercetin (2-(3,4-dihydroxyphenyl)-3,5,7-trihydroxy-4H-chromen-4-one dihydrate) was used for the complexation of Zn(II) and Cr(III) ions at different pHs. The 1-hexyl-3-methylimidazolium bis[(trifluoromethyl) sulfonyl]imide ([Hmim][NTf2] and acetonitrile were used as extraction solvent and dispersive solvent, respectively. To provide quantitative extraction of analytes, important experimental variables such as pH of sample solution, temperature, ultrasonic time, amount of chelating agent, amount of ionic liquid, type and amount of dispersive solvent, and interference effect were extensively studied and optimized. The detection limits and operating ranges for Zn(II) and Cr(III) using the optimized conditions were 7.5, 25-450 and 2.4, 8-300 μg L^-1, respectively. For the validation of the proposed method, the certified reference material was tested using the standard addition method. After microwave digestion analysis of grain products, relative standard deviations (RSDs%) and recoveries were ranged from 1.2 to 2.3% and from 91.2 to 103.7%, respectively. The UA-IL-DLLME method has been successfully applied for the determination of Zn and Cr in grain samples (chickpea, broad bean, pea, beans, and wheat).

The classic aqua regia and EPA 3051A methods can mislead environmental assessments and certifications: Potentially harmful elements resorption in short-range order materials

EPA 3051A and Aqua Regia (AR) are widely adopted by global environmental agencies to assess soil quality in relation to potentially harmful elements (PHE). However, previous study has shown the formation of large amounts of short-range order materials (SRO) in the residues of these extractions. Residues obtained from the 3051A and AR were recovered from filter papers. To characterize the SRO in these residues, sequential extractions were performed with 0.2 mol L^-1 ammonium oxalate (AO) and 0.5 mol L^-1 NaOH. On average (n = 15), the 3051A and AR residues contained 37% and 60% of SRO, respectively. The largest amounts of SRO formed in the AR residue was in sample 5 (99% of SRO). The main component of the SRO was Al₂O₃-AO, Fe₂O₃-AO and SiO₂-NaOH. The formation of SRO and PHE resorption levels were random and highly dependent on the mineralogy of the soil clay fraction. Soils rich in smectites, which are more common in temperate regions, formed larger amounts of SRO. The association of Pb with the SRO was more pronounced in the 3051A residue than in the AR residue. If SRO was not extracted after 3051A, in sample 7, for example, 595 mg kg^-1 of Pb (10.2%) would have not been accounted. The maximum PHE resorptions in SRO were (%): Pb - 10; Cu - 470; Ba - 280; As - 21. The underestimation of PHE contents due to resorption mechanisms may lead an environmental agency to certify the use of an area contaminated with PHE.

Bioleaching of valuable and hazardous metals from dry discharged incineration slag. An approach for metal recycling and pollutant elimination

Recycling of process wastes will be in future an essential step to meet the demands for valuable metals of a growing market. Depending on their particle sizes incineration slags are already used to recover metals but particle size fractions below 4 mm are still difficult to recycle. Therefore, different particle size fractions (mesh size 2 and 4 mm, high energy grinded) of dry discharged slags were used for bioleaching with and without the pure cultures Acidithiobacillus ferrooxidans or Leptospirillum ferrooxidans or a mixture of Acidithiobacillus thiooxidans and Acidithiobacillus ferrooxidans in batch cultures. Regarding Al, Cr, Cu, Ni, Mn and the rare earth elements Ce, La and Er, bioleaching was significantly more successful with iron oxidizing bacteria compared to abiotic controls. Metal mobilization for Al, Cu, Mn, Cr and Er with bacteria was between 70 and 100% and for Ce, Ni and La around 50% almost after 7 days, making an industrial application for the high concentrated metals like Al and Cu feasible. In addition to the recovery of valuable metals, a reduction in cost of landfilling was identified. After treatment of the slag with the microorganisms, concentrations of harmful substances in the residues could be reduced and thus a classification in lower safety levels regarding the LAGA or EU regulations was calculated.

Similar but not the same: metal concentrations in hair of three ecologically similar, forest-dwelling bat species (Myotis bechsteinii, Myotis nattereri, and Plecotus auritus)

Recently, a number of studies demonstrated the suitability of hair analysis to assess metal exposure of bats. As many bat species are endangered, such a non-destructive method is particularly suited for this taxon. The present study analyzed the levels of two non-essential (cadmium and lead) and four essential metals (copper, manganese, molybdenum, and zinc) in hairs of three ecologically similar, sympatric bat species, Bechstein's bat (Myotis bechsteinii), Natterer's bat (Myotis nattereri), and Brown long-eared bat (Plecotus auritus) from an area in Central Hesse (Germany), as well as metal concentrations in soil samples from the bats' foraging habitats. Applying a previously established protocol, the analyses were performed using microwave-assisted extraction followed by inductively coupled plasma optical emission spectrometry. Cadmium and lead concentrations in hair did not differ significantly among the three studied species, whereas the following significant differences existed for levels of essential metals in hair. Manganese concentrations in hair were higher in M. bechsteinii and P. auritus than in M. nattereri and Cu concentrations were higher in M. nattereri than in P. auritus. Myotis bechsteinii showed higher Zn concentrations compared to P. auritus and lower Mo concentrations compared to M. nattereri. Reasons for the observed differences among the three studied species could be differential exposure to these metal elements in their foraging areas, related to variation in the species composition of their arthropod diet in combination with different metal levels in the respective prey species, and/or species-specific requirements for essential metals and related variation in physiological regulation of these elements in the bats.

Relationship between heavy metals and minerals extracted from soil clay by standard and novel acid extraction procedures

Strong acid digestions are commonly used to determine heavy metal (HM) contents in soils. In order to understand more fully the acid digestion processes, a logical step is to determine the extent of dissolution of mineral phases. The aims of this study were to compare the efficiency of extraction of HM by different acid digestions and to monitor the associated dissolution of the clay fraction. The context of the study was to develop a milder chemical extraction method (microwave-assisted 1 mol L^-1 HNO₃ closed system (NACS)), which recovers more reactive HM and with little dissolution of minerals. The different acid digestion methods dissolved different amounts of minerals from the clay fraction. Both aqua regia (AR) and EPA 3051 dissolved all of the Fe and Al oxides, and the dissolution of kaolin was limited to thinner particles (c dimension), smaller particles in a and b dimensions and grains with lower crystallinity. The lower recovery of HM for AR compared with EPA 3051 was related to the large amount of short-range order phases formed during the AR extraction as these phases have the capacity to re-adsorb HM. The new method (NACS) has the potential to replace other methods of determining bioavailable forms of HM, such as AR and EPA 3051. The contents of Pb, As, Co, Zn, and Cu determined by EPA 3051 and EPA 3052 were quite close.

Reduction of metal exposure of Daubenton's bats (Myotis daubentonii) following remediation of pond sediment as evidenced by metal concentrations in hair

Transfer of contaminants from freshwater sediments via aquatic insects to terrestrial predators is well documented in spiders and birds. Here, we analyzed the metal exposure of Myotis daubentonii using an urban pond as their preferred foraging area before and after a remediation measure (sediment dredging) at this pond. Six metal elements (Zn, Cu, Cr, Cd, Pb and Ni) were measured in the sediment of the pond, in EDTA extracts of the sediment and in hair samples of M. daubentonii foraging at the pond. Samples were taken before remediation in 2011 and after remediation in 2013. Metal concentrations were quantified by ICP-OES after miniaturized microwave assisted extraction. In 2011, the pond sediment exhibited a high contamination with nickel, a moderate contamination with copper and chromium and low contents of zinc, cadmium and lead. While sediment metal contents declined only weakly after remediation, a much more pronounced reduction in the concentrations of zinc, copper, chromium and lead concentrations was observed in bat hair. Our results suggest a marked decline in metal exposure of the bats foraging at the pond as a consequence of the remediation measure. It is concluded that Daubenton's bats are suitable bioindicators of metal contamination in aquatic environments, integrating metal exposure via prey insects over their entire foraging area. We further suggest that bat hair is a useful monitoring unit, allowing a non-destructive and non-invasive assessment of metal exposure in bats.

On-line microwave-based preconcentration device for inductively coupled plasma atomic emission spectrometry: application to the elemental analysis of spirit samples

A microwave-based thermal nebulizer (MWTN) has been employed for the first time as on-line preconcentration device in inductively coupled plasma atomic emission spectrometry (ICP-AES). By the appropriate selection of the experimental conditions, the MWTN could be either operated as a conventional thermal nebulizer or as on-line analyte preconcentration and nebulization device. Thus, when operating at microwave power values above 100 W and highly concentrated alcohol solutions, the amount of energy per solvent mass liquid unit (EMR) is high enough to completely evaporate the solvent inside the system and, as a consequence, the analyte is deposited (and then preconcentrated) on the inner walls of the MWTN capillary. When reducing the EMR to the appropriate value (e.g., by reducing the microwave power at a constant sample uptake rate) the retained analyte is swept along by the liquid-gas stream and an analyte-enriched aerosol is generated and next introduced into the plasma cell. Emission signals obtained with the MWTN operating in preconcentration-nebulization mode improved when increasing preconcentration time and sample uptake rate as well as when decreasing the nozzle inner diameter. When running with pure ethanol solution at its optimum experimental conditions, the MWTN in preconcentration-nebulization mode afforded limits of detection up to one order of magnitude lowers than those obtained operating the MWTN exclusively as a nebulizer. To validate the method, the multi-element analysis (i.e. Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Pb and Zn) of different commercial spirit samples in ICP-AES has been performed. Analyte recoveries for all the elements studied ranged between 93% and 107% and the dynamic linear range covered up to 4 orders of magnitude (i.e. from 0.1 to 1000μgL(-1)). In these analysis, both MWTN operating modes afforded similar results. Nevertheless, the preconcentration-nebulization mode permits to determine a higher number of analytes due to its higher detection capabilities.