Using a novel sol–gel stir bar sorptive extraction method for the analysis of steroid hormones in water by laser diode thermal desorption/atmospheric chemical ionization tandem mass spectrometry

A nitrogen-doped hollow carbon nanospheres-based aptasensor for non-invasive salivary detection of progesterone

Developing an easy-to-use and non-invasive sensor for monitoring progesterone (P4) as a multi-functional hormone is highly demanded for point-of-care testing. In this study, an ultrasensitive electrochemical aptasensor is fabricated for monitoring P4 in human biofluids. The sensing interface was designed based on the porous nitrogen-doped hollow carbon spheres (N-HCSs). The N-HCSs covalently immobilized high-dense aptamer (Apt) sequences as the bioreceptor of P4. The electron transfer of the redox probe was hindered by incubating P4 on the aptasensor surface and forming the P4-Apt complexes. Meanwhile, the signaling was decreased under two wide linear dynamic ranges (LDRs) from 10 fM to 5.6 μM with a limit of detection (LOD) value of 3.33 fM. The aptasensor presented satisfactory selectivity in the presence of different off-target species with successful feasibility for P4 detection in some human urine and saliva samples. The aptasensor with high sensitivity, as an advantage for on-site and sensitive measurement of P4, can be considered a non-invasive tool for routine analysis of real-world clinical samples method.

3D printed stir bar sorptive extraction coupled with high performance liquid chromatography for trace estrogens analysis in environmental water samples

BACKGROUND

Any imaginary shape with good preparation reproducibility can be made by 3D printing technology, and it has been applied in various fields. Comparatively, its applications in sample pre-treatment are relatively less, most of which involves making extraction sorbents and producing non-functionalized devices for support assistance. 3D printing has not been applied to fabricate stir bars in stir bar sorptive extraction, mainly due to the lacking of suitable printing feedstocks. This work aimed to fabricate stir bars by 3D printing, reducing the manufacturing cost and steps and improving preparation reproducibility. (90) RESULTS: By using fused deposition modeling technique and porous filament printing feedstock, stir bars were fabricated without any modifications. Adsorption performance of 3D printed stir bars were investigated for substances with different structures and polarities. Five estrogens with adsorption efficiencies of over 80 % were selected as the representatives. The 3D printed stir bars exhibited good preparation reproducibility (2.9-4.4 %) and higher extraction recoveries (73-81 %) for five estrogens than commercial polydimethylsiloxane coated stir bars (13-69 %) in a shorter time (90 vs 120 min). They showed long lifespan (160 times) with good mechanical properties and merited reduced manufacturing cost (0.064 $ per bar) and manual operation. A method of stir bar sorptive extraction coupled with high performance liquid chromatography was proposed for trace analysis of estrogens in environmental water. Under the optimized conditions, the linear ranges for estrogens were 0.5-200 μg/L with LODs of 0.13-0.17 μg/L. (136) SIGNIFICANCE: The feasibility of fused deposition modeling in stir bar fabrication was demonstrated, along with the potential of porous filament printing feedstock as the sorbent for substances with medium polarity. 3D printed stir bars were featured with excellent preparation reproducibility, long lifespan, and good mechanical properties. The stir bar fabrication method can be used for mass production with minimal differences in products performance. (62).

Solventless Microextration Techniques for Pharmaceutical Analysis: The Greener Solution

Extensive efforts have been made in the last decades to simplify the holistic sample preparation process. The idea of maximizing the extraction efficiency along with the reduction of extraction time, minimization/elimination of hazardous solvents, and miniaturization of the extraction device, eliminating sample pre- and posttreatment steps and reducing the sample volume requirement is always the goal for an analyst as it ensures the method’s congruency with the green analytical chemistry (GAC) principles and steps toward sustainability. In this context, the microextraction techniques such as solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE), microextraction by packed sorbent (MEPS), fabric phase sorptive extraction (FPSE), in-tube extraction dynamic headspace (ITEX-DHS), and PAL SPME Arrow are being very active areas of research. To help transition into wider applications, the new solventless microextraction techniques have to be commercialized, automated, and validated, and their operating principles to be anchored to theory. In this work, the benefits and drawbacks of the advanced microextraction techniques will be discussed and compared, together with their applicability to the analysis of pharmaceuticals in different matrices.

Assessment of automated off-line solid-phase extraction LC-MS/MS to monitor EPA priority endocrine disruptors in tap water, surface water, and wastewater

EPA method 539.1 recently introduced an expanded list of priority endocrine-disrupting compounds (EDCs), some of which were also included in the Unregulated Contaminant Monitoring Rule 3 (UCMR3). Though standardized methods are available for drinking water, analysis of steroid hormones and bisphenol A (BPA) at the ultra-trace level remains challenging. This study set out to evaluate the suitability of automated off-line solid-phase extraction (SPE) liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the determination of EPA-priority EDCs in environmental water matrixes (tap water, surface water, and wastewater influents and effluents). The target molecules included 14 steroid hormones (altrenogest, androstenedione, equilenin, equilin, α-estradiol, β-estradiol, estriol, estrone, ethinylestradiol, levonorgestrel, medroxyprogesterone, norethindrone, progesterone, testosterone) and BPA. Factors that may influence the analytical performance were assessed. This involved, for instance, testing combinations of SPE materials from different brands and protocol variations. Several materials presented absolute extraction efficiencies in acceptable ranges. Initial sample pH, nature of reconstitution medium, and mobile phase salt concentration were among the potential factors affecting analyte signal. Storage conditions (different preservative agents) possibly exerted the strongest influence, in agreement with the literature. Limits of detection were in the range of 0.03-0.5 ng/L in drinking water, 0.1-0.5 ng/L in surface water, and 0.16-1 ng/L in wastewater. Method validation also involved testing linearity, accuracy, and precision in reagent water and matrix-matched extracted calibrants. The method was applied to field-collected water samples in Eastern Canada. Summed EDC concentrations remained low in tap water (<LOQ-0.92 ng/L), while higher detection frequencies and contamination levels were reported in riverine surface waters (2.6-37 ng/L) and municipal wastewaters (10-424 ng/L).

LASER DESORPTION/ABLATION POSTIONIZATION MASS SPECTROMETRY: RECENT PROGRESS IN BIOANALYTICAL APPLICATIONS

Lasers have long been used in the field of mass spectrometric analysis for characterization of condensed matter. However, emission of neutrals upon laser irradiation surpasses the number of ions. Typically, only one in about one million analytes ejected by laser desorption/ablation is ionized, which has fueled the quest for postionization methods enabling ionization of desorbed neutrals to enhance mass spectrometric detection schemes. The development of postionization techniques can be an endeavor that integrates multiple disciplines involving photon energy transfer, electrochemistry, gas discharge, etc. The combination of lasers of different parameters and diverse ion sources has made laser desorption/ablation postionization (LD/API) a growing and lively research community, including two-step laser mass spectrometry, laser ablation atmospheric pressure photoionization mass spectrometry, and those coupled to ambient mass spectrometry. These hyphenated techniques have shown potentials in bioanalytical applications, with major inroads to be made in simultaneous location and quantification of pharmaceuticals, toxins, and metabolites in complex biomatrixes. This review is intended to provide a timely comprehensive view of the broadening bioanalytical applications of disparate LD/API techniques. We also have attempted to discuss these applications according to the classifications based on the postionization methods and to encapsulate the latest achievements in the field of LD/API by highlighting some of the very best reports in the 21st century. © 2020 John Wiley & Sons Ltd.

Carbon-Based Sorbent Coatings for the Determination of Pharmaceutical Compounds by Bar Adsorptive Microextraction

Thirteen carbon materials comprising commercial activated carbons and lab-made materials (activated carbons, hydrochars, and low-T and high-T activated hydrochars) were assayed as sorbent coatings in bar adsorptive microextration (BAμE) to monitor trace levels of ten common pharmaceutical compounds (PhCs) in environmental water matrices including surface water, seawater, tap water, and wastewater. Polar and nonpolar pharmaceuticals were selected, sulfamethoxazole, triclosan, carbamazepine, diclofenac, mefenamic acid, 17-α-ethinylestradiol, 17-β-estradiol, estrone, gemfibrozil, and clofibric acid, as model compounds to cover distinct therapeutic classes. Despite having a less-developed porosity, data showed that "in-house" prepared low-T activated hydrochars, obtained from carbohydrates and an eutectic salt mixture at low temperature (i.e., 180 °C) and autogenerated pressure, compete with the best commercial activated carbons for this particular application. The combination of a micro and mesopore network with a rich oxygen-based surface chemistry yielding an acidic nature allowed these low-T activated hydrochars to present the best overall recoveries (between 20.9 and 82.4%) for the simultaneous determination of the ten target PhCs with very distinct chemical properties using high performance liquid chromatography-diode array detection (HPLC-DAD).

Cork sheet as a sorptive phase to extract hormones from water by rotating-disk sorptive extraction (RDSE)

This work reports for the first time the use of laminar cork as a sorptive phase in a microextraction technique, rotating-disk sorptive extraction (RDSE). Typical hormones (estrone, estradiol, estriol and ethinyl estradiol) were selected as analyte models and extracted from wastewater samples on laminar cork with statistically equivalent extraction efficiency to that provided by Oasis HLB. The cork characterization was performed by confocal fluorescence microscopy (CLSM), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), allowing the identification of lignin, suberin and polysaccharides (cellulose and hemicellulose) as the main components of the cork. The best conditions for extraction were as follows: rotation velocity of the disk, 2000 rpm; extraction time, 45 min; and sample volume, 20 mL. The analytical features of the developed method show that calibration curves for all analytes have R² values higher than 0.99. The absolute recoveries were higher than 63%, and the precision, expressed as relative standard deviation, ranged from 2 to 16%. The LOD and LOQ ranges were 3-19 and 10-62 ng L^-1, respectively. The proposed method was applied to the analysis of wastewater, and the concentrations of hormones in a wastewater treatment plant in Santiago, Chile, ranged from <LOQ to 48 ng L^-1.

Recent Advances and Challenges in Steroid Metabolomics for Biomarker Discovery

BACKGROUND

Steroid hormones belong to a group of low-molecular weight compounds which are responsible for maintenance of various body functions, thus, their accurate assessment is crucial for evaluation of biosynthetic defects. The development of reliable methods allowing disease diagnosis is essential to improve early detection of various disorders connected with altered steroidogenesis. Currently, the field of metabolomics offers several improvements in terms of sensitivity and specificity of the diagnostic methods when opposed to classical diagnostic approaches. The combination of hyphenated techniques and pattern recognition methods allows to carry out a comprehensive assessment of the slightest alterations in steroid metabolic pathways and can be applied as a tool for biomarker discovery.

METHODS

We have performed an extensive literature search applying various bibliographic databases for peer-reviewed articles concentrating on the applications of hyphenated techniques and pattern recognition methods incorporated into the steroid metabolomic approach for biomarker discovery.

RESULTS

The review discusses strengths, challenges and recent developments in steroidbased metabolomics. We present methods of sample collection and preparation, methods of separation and detection of steroid hormones in biological material, data analysis, and interpretation as well as examples of applications of steroid metabolomics for biomarker discovery (cancer, mental and central nervous system disorders, endocrine diseases, monitoring of drug therapy and doping control).

CONCLUSION

Information presented in this review will be valuable to anyone interested in the application of metabolomics for biomarker discovery with a special emphasis on disorders of steroid hormone synthesis and metabolism.

Seasonal variations of steroid hormones released by wastewater treatment plants to river water and sediments: Distribution between particulate and dissolved phases

Extensive environmental monitoring was conducted in an urban river impacted by multiple combined sewer overflows (CSOs) and wastewater treatment plant (WWTP) discharge points. Temporal and spatial distributions of dissolved and particulate steroids (progesterone (Prog), testosterone (Testo), medroxyprogesterone (MDRXY-Prog), levonorgestrel (Levo), norethindrone (Nore), estrone (E1), estradiol (E2), estriol (E3), and 17α-ethinylestradiol (EE2)) were investigated in sewage, WWTP effluents, receiving river water and sediments, and in drinking water plant (DWP) intakes. Steroids were detected in both dissolved and particulate phases with mean concentrations from 21ngL^-1 to 389ngL^-1 in raw sewage and from 10ngL^-1 to 296ngL^-1 in treated wastewater. The particle-associated steroids represented 0-82% of their total concentration as some steroids like E1 and E3 were detected only in the dissolved phase while MDRXY-Prog (81%), Nore (71%), and EE2 (>75%) were primarily detected in the particulate phase. Particle-associated steroids were detected in spring samples from river water with mean concentrations ranging from 5.4ngL^-1 to 35.7ngL^-1 compare to 3ngL^-1 to 6.8ngL^-1 in summer samples. Levels of particle-associated Testo, Nore, E2 and Levo in DWP intakes (406.2-13,149.1ngg^-1) were similar to those found in raw sewage (336.6-7628.8ngg^-1), indicating their persistence in the suspended phase from discharge points. Total steroids measured in sediments were in the range of 7-1213ngg^-1, 5-25ngg^-1, and 22-226ngg^-1 in autumn, spring, and summer, respectively. Our findings confirm the presence and seasonal variation of a mixture of particle-associated steroids in drinking water sources. The presence of high concentrations of a mixture of particle-associated steroids in DWP intakes highlight the need for highly effective particle-removal processes to eliminate these recalcitrant compounds during drinking water production. Finally, the detected concentrations raise concerns about their potential environmental effects.

New 3D-printed sorbent for extraction of steroids from human plasma preceding LC-MS analysis

In recent years, there has been an increasing worldwide interest in the use of alternative sample preparation methods that are proceeded by separation techniques. Fused deposition modeling (FDM) is a 3D printing technique that is based the consecutive layering of softened/melted thermoplastic materials. In this study, a group of natural steroids and sexual hormones - namely, aldosterone, cortisol, β-estradiol, testosterone, dihydrotestosterone, and synthetic methyltestosterone and betamethasone - were separated and determined using an optimized high-performance liquid chromatography coupled to mass spectrometry (LC-MS) method in positive ionization mode. 3D-printed sorbents were selected as the pre-concentration technique because they are generally low cost, fast, and simple to make and automate. Furthermore, the use of 3D-printed sorbents helps to minimize potential errors due to their repeatability and reproducibility, and their ability to eliminate carry over by using one printed sorbent for a single extraction of steroids from biological matrices. The extraction procedure was optimized and the parameters influencing 3D-printed Layfomm 60^® based sorbent and LC-MS were studied, including the type of extraction solvent used, sorption and desorption times, temperature, and the salting-out effect. To demonstrate this method's applicability for biological sample analysis, the SPME-LC-MS method was validated for its ability to simultaneously quantify endogenous steroids. This evaluation confirmed good linearity and an R² that was between 0.9970 and 0.9990. The recovery rates for human plasma samples were 86.34-93.6% for the studied steroids with intra- and inter-day RSDs of 1.44-7.42% and 1.44-9.46%, respectively. To our knowledge, this study is the first time that 3D-printed sorbents have been used to extract trace amounts of endogenous low-molecular-weight compounds, such as steroids, from biological samples, such as plasma.

Quantitative mass spectrometry methods for pharmaceutical analysis

Quantitative pharmaceutical analysis is nowadays frequently executed using mass spectrometry. Electrospray ionization coupled to a (hybrid) triple quadrupole mass spectrometer is generally used in combination with solid-phase extraction and liquid chromatography. Furthermore, isotopically labelled standards are often used to correct for ion suppression. The challenges in producing sensitive but reliable quantitative data depend on the instrumentation, sample preparation and hyphenated techniques. In this contribution, different approaches to enhance the ionization efficiencies using modified source geometries and improved ion guidance are provided. Furthermore, possibilities to minimize, assess and correct for matrix interferences caused by co-eluting substances are described. With the focus on pharmaceuticals in the environment and bioanalysis, different separation techniques, trends in liquid chromatography and sample preparation methods to minimize matrix effects and increase sensitivity are discussed. Although highly sensitive methods are generally aimed for to provide automated multi-residue analysis, (less sensitive) miniaturized set-ups have a great potential due to their ability for in-field usage.This article is part of the themed issue 'Quantitative mass spectrometry'.

Stir bar sorptive extraction: recent applications, limitations and future trends

Stir bar sorptive extraction (SBSE) has generated growing interest due to its high effectiveness for the extraction of non-polar and medium-polarity compounds from liquid samples or liquid extracts. In particular, in recent years, a large amount of new analytical applications of SBSE has been proposed for the extraction of natural compounds, pollutants and other organic compounds in foods, biological samples, environmental matrices and pharmaceutical products. The present review summarizes and discusses the theory behind SBSE and the most recent developments concerning its effectiveness. In addition, the main results of recent analytical approaches and their applications, published in the last three years, are described. The advantages, limitations and disadvantages of SBSE are described and an overview of future trends and novel extraction sorbents and supports is given.

A new protocol for the analysis of pharmaceuticals, pesticides, and hormones in sediments and suspended particulate matter from rivers and municipal wastewaters

We developed a protocol to quantify 12 emerging contaminants (ECs) (pharmaceuticals and hormones) and pesticides extracted from suspended particulate matter (SPM) of river water and municipal wastewaters samples as well as river sediments. The separation of suspended solids was realized using filtration of water samples. We tested a series of six different filter types. The effect of filtration on the concentrations of dissolved contaminants was evaluated to minimize losses of target compounds. The river sediment samples were lyophilized, and both SPM and sediment samples were subjected to ultrasonic extraction combined with C18 cartridge clean-up. Quantifications were realized using mass spectrometry. The method recoveries of all compounds ranged from 38 to 112 % in all studied matrices; poorer recoveries were achieved for sulfamethoxazole and diclofenac (as low as 38 %), whereas the recoveries for all other compounds in the wastewater treatment plant (WWTP) samples were between 68 and 111 %. The detection limits in sediments and SPM from river samples for the 12 analytes varied from 0.7 to 9.4 ng g(-1) and from 21 to 92 ng g(-1) for WWTP SPM samples. All targeted ECs were detected with concentrations ranging from 3 to 5,440 ng g(-1) in the studied matrices with the highest concentrations observed in WWTP SPM samples. A significant portion of the contaminants in a water sample is clearly associated with the suspended particulates. Optimization of water-treatment processes and environmental fate must absolutely consider the fraction of contaminants that is particulate-bound if one hopes to have a reasonable mass balance.

Determination of polar aromatic amines using newly synthesized sol-gel titanium (IV) butoxide cyanopropyltriethoxysilane as solid phase extraction sorbent

A solid phase extraction (SPE) method has been developed using a newly synthesized titanium (IV) butoxide-cyanopropyltriethoxysilane (Ti-CNPrTEOS) sorbent for polar selective extraction of aromatic amines in river water sample. The effect of different parameters on the extraction recovery was studied using the SPE method. The applicability of the sorbents for the extraction of polar aromatic amines by the SPE was extensively studied and evaluated as a function of pH, conditioning solvent, sample loading volume, elution solvent and elution solvent volume. The optimum experimental conditions were sample at pH 7, dichloromethane as conditioning solvent, 10 mL sample loading volume and 5 mL of acetonitrile as the eluting solvent. Under the optimum conditions, the limit of detection (LOD) and limit of quantification (LOQ) for solid phase extraction using Ti-CNPrTEOS SPE sorbent (0.01-0.2; 0.03-0.61 µg L(-1)) were lower compared with those achieved using Si-CN SPE sorbent (0.25-1.50; 1.96-3.59 µg L(-1)) and C18 SPE sorbent (0.37-0.98; 1.87-2.87 µg L(-1)) with higher selectivity towards the extraction of polar aromatic amines. The optimized procedure was successfully applied for the solid phase extraction method of selected aromatic amines in river water, waste water and tap water samples prior to the gas chromatography-flame ionization detector separation.