Optimization of a GC/MS procedure that uses parallel factor analysis for the determination of bisphenols and their diglycidyl ethers after migration from polycarbonate tableware

Broad-Spectrum Antibody-Based Immunochromatographic Strip Assay for Rapid Screening of Bisphenol A Diglycidyl Ether and Its Derivatives in Canned Foods

Bisphenol A diglycidyl ether (BADGE) is widely present in the inner coating of metal food cans, from which it can migrate into food and generate harmful derivatives during storage, such as bisphenol A (2,3-dihydroxypropyl) glycidyl ether, bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether, and bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) glycidyl ether. Here, a gold-nanoparticle-based immunochromatographic strip assay based on a broad-spectrum polyclonal antibody was developed for the simultaneous detection of BADGE and its derivatives, which could be accomplished within 15 min. The quantitative analysis of the visualization results was performed using Adobe Photoshop CC 2021, and the detection limit, defined as the concentration causing 15% inhibition, was 0.97 ng/mL. The recoveries of BADGE and its derivatives at various spiking levels in canned food samples ranged from 79.86% to 93.81%. The detection results of the proposed immunochromatographic strip assay were validated via high-performance liquid chromatography, showing a good correlation coefficient (R2 = 0.9580).

Estimation of parabens and bisphenols in maternal products and urinary concentrations in Indian pregnant women: daily intake and health risk assessment

The presence of parabens and bisphenols in maternal products and usage during pregnancy have raised serious concern about their possible harm to pregnant women. The concentrations of six parabens and eight bisphenols were quantified by high-performance liquid chromatography-tandem mass spectrometry in the samples of commercially available herbal-based ayurvedic maternal products and urine of healthy pregnant women from Assam, India. Methyl paraben (MP) and bisphenol AF (BPAF) were found to be more dominant in the maternal products, whereas MP, bisphenol A (BPA), and BPAF were dominant in urine samples of healthy pregnant women. The sum of the mean concentrations of all forms of parabens and bisphenols in maternal products were 48,308.50 ng/g and 542.42 ng/g, respectively, and urine 101.33 ng/mL and 23.42 ng/mL, respectively. The estimated daily intake (EDI) of total parabens and bisphenols in maternal products were 7378.02 and 19.78 ng/kg body weight/day, respectively. EDI of total parabens and bisphenols from urinary concentrations were 690.12 and 111.33 μg/kg body weight/day, respectively. The concentrations of butyl (BP) and heptyl (HP) parabens have a significant positive correlation with birth weight. The hazard quotient (HQ) value of MP, EP, and BPA was less than 1, and margin of exposure (MOE) identified potential risk associated with propyl paraben. Results from Monte-Carlo risk assessment analysis did not exceed the acceptable daily intake (ADI). Our results showed that higher concentrations of parabens and bisphenols are present in maternal products and the urine of healthy pregnant women. Hence maternal products containing bisphenols and parabens should be used cautiously during pregnancy to avoid maternal and fetal complications.

Determination of 60 Migrant Substances in Plastic Food Contact Materials by Vortex-Assisted Liquid-Liquid Extraction and GC-Q-Orbitrap HRMS

A GC-HRMS analytical method for the determination of 60 migrant substances, including aldehydes, ketones, phthalates and other plasticizers, phenol derivatives, acrylates, and methacrylates, in plastic food contact materials (FCM) has been developed and validated. The proposed method includes migration tests, according to Commission Regulation (EU) 10/2011, using four food simulants (A, B, C, and D1), followed by vortex-assisted liquid–liquid extraction (VA-LLE) and GC-Q-Orbitrap HRMS analysis in selected ion monitoring (SIM) mode, with a resolving power of 30,000 FWHM and a mass accuracy ≤5 ppm. The method was validated, showing satisfactory linearity (R² ≥ 0.98 from 40 to 400 µg L⁻¹), limits of quantification (40 µg L⁻¹), precision (RSD, 0.6–12.6%), and relative recovery (81–120%). The proposed method was applied to the analysis of field samples, including an epoxy-coated tin food can, a drinking bottle made of Tritan copolyester, a disposable glass made of polycarbonate, and a baby feeding bottle made of polypropylene, showing that they were in compliance with the current European regulation regarding the studied substances.

Potential risk of BPA and phthalates in commercial water bottles: a minireview

The global water bottling market grows annually. Today, to ensure consumer safety, it is important to verify the possible migration of compounds from bottles into the water contained in them. Potential health risks due to the prevalence of bisphenol A (BPA) and phthalates (PAEs) exposure through water bottle consumption have become an important issue. BPA, benzyl butyl phthalate (BBP), di-n-butyl phthalate (DBP) and di (2-ethylhexyl) phthalate (DEHP) can cause adverse effects on human health. Papers of literature published in English, with BPA, BBP, DBP and DEHP detections during 2017, by 2019 by liquid chromatography and gas chromatography analysis methods were searched. The highest concentrations of BPA, BBP, DBP and DEHP in all the bottled waters studied were found to be 5.7, 12.11, 82.8 and 64.0 μg/L, respectively. DBP was the most compound detected and the main contributor by bottled water consumption with 23.7% of the Tolerable Daily Intake (TDI). Based on the risk assessment, BPA, BBP, DBP and DEHP in commercial water bottles do not pose a serious concern for humans. The average estrogen equivalent level revealed that BPA, BBP, DBP and DEHP in bottled waters may induce adverse estrogenic effects on human health.

Multilinear Mathematical Separation in Chromatography

Chromatography is a powerful and generally applicable method for the analytical separation and quantification of the chemical constituents in complex mixtures because chromatographic separation can provide high selectivity by isolating all analytes from interferences. Multiway analysis based on the multilinear model is an increasingly widely used method for interference-free and fast determination of the chemical constituents also in complex mixtures because multilinear mathematical separation can provide high selectivity by extracting the pure signal of the analyte from the mixed signal of a real sample. By combining chromatographic separation with mathematical separation, multiway calibration method, multiway standard additions method, and multiway internal standard method can be established. Chromatography assisted by multiway analysis can reduce the requirements for complete chromatographic separation, save elution time, and decrease the consumption of the mobile phase, particularly when the peak coelution problem is difficult to solve. This review presents the fundamentals and analytical applications of multilinear mathematical separation in chromatography.

Differentiation of bisphenol F diglycidyl ether isomers and their derivatives by HPLC-MS and GC-MS-comment on the published data

Positional isomers of bisphenol F diglycidyl ether (BFDGE) have been analyzed by high-pressure liquid chromatography-mass spectrometry and by gas chromatography-mass spectrometry (HPLC-MS, GC-MS). Positional isomers of BFDGE derivatives (BFDGEx2H₂O, BFDGExH₂OxHCl) have been analyzed by HPLC-MS. On the basis of the obtained fragmentation patterns, the elution order of the isomers has been unequivocally determined, in standard solutions and in the sample of liquid obtained after rinsing an empty mackerel fish can with acetonitrile. Under HPLC condition, para,para isomers are eluted first, then ortho,para isomers’ elution follows, and ortho,ortho isomers are eluted last. Under GC condition, the reverse elution order has been obtained. For the first time, two ortho,para isomers of BFDGExH₂OxHCl have been detected and their elution order has been determined. The obtained results are of key importance for determination of the isomer distribution of BFDGE and its derivatives in food samples.

Electron ionization induced fragmentation of fluorinated derivatives of bisphenols

RATIONALE

Fluorinated derivatization agents allow for the identification and quantification of emerging pollutants with high sensitivity, yet details of their potential applications using electron ionization are lacking. The fluorine atom itself does not effectively participate in electron ionization. Furthermore, limited information exists regarding the effect of fluorine during electron ionization-induced fragmentation. To fill this gap, this report presents the fragmentation pathways of the fluorinated derivatives of ten bisphenol analogues as exemplary emerging pollutants.

METHODS

The bisphenols were derivatized by the acetylation reagent trifluoroacetic anhydride and a new silylation reagent, namely dimethyl(3,3,3-trifluoropropyl)silyldiethylamine (DIMETRIS; previously applied for the analysis of selected pharmaceuticals in environmental samples), and analyzed using GC/MS (electron ionization, 70 eV). Deuterated bisphenol A was added to the group of analytes to confirm the proposed fragmentation pathways.

RESULTS

The specific chemical structure of bisphenols gives the possibility of several resonance hybrids of C-centered radicals. This, in turn, results in several fragmentation pathways, unique for each resonance hybrid. Sequential losses of radicals and neutral fragments were observed in both types of derivative, with final stable carbenium ions. McLafferty-type rearrangements were observed between the native structure of the analytes and the introduced substituents. The gamma-shift of F onto Si in the Si(CH₂ )₂ CF₃ substituent is proposed to explain the loss of the fragment with a mass of 78 u.

CONCLUSIONS

Both types of derivatization reagent used were found to be applicable, although the use of DIMETRIS was limited for high-mass bisphenols. The introduction of fluorine by derivatization brings benefits for the qualitative and quantitative analysis of bisphenol-type compounds using GC/MS because of the presence of characteristic ions in the mass spectra.

The quantification of bisphenols and their analogues in wastewaters and surface water by an improved solid-phase extraction gas chromatography/mass spectrometry method

The study focused on the application of GC in the quantitative analysis of bisphenols and their analogues (12 analytes), and the improvement of solid-phase extraction for the whole water analysis of complex water samples. The role of silylation in the qualitative and quantitative analysis of bisphenols was investigated. Partial degradation occurred for selected targets during hot injection with the presence of a silylation agent. A PSA (primary and secondary amines) sorbent placed on the top of the solid-phase extraction (SPE) column sorbent was found to be a matrix component trap, mostly for humic acids. The whole water analysis was performed by washing the filters with methanol and recycling the extract to the sample. The validation of SPE-GC/MS(SIM) gave limits of detection of 1-50 ng/L for ten target bisphenols with a method recovery of between 87 and 133%. The application of the method was tested by the analysis of wastewater sampled from three wastewater treatment plants located in Poland, and municipal surface waters. The only analytes found were BPA and BPS, within the range of 16-1465 ng/L and < MDL-1249 ng/L in wastewater, and 170-3113 ng/L and < MDL-1584 ng/L in surface water, respectively.

Enhancing the selectivity of liquid chromatography-mass spectrometry by using trilinear decomposition on LC-MS data: An application to three-way calibration of coeluting analytes in human plasma

The high selectivities of liquid chromatography and mass spectrometry make liquid chromatography-mass spectrometry one of the most popular tools for quantitative analysis in complex chemical, biological, and environmental systems, while the potential mathematical selectivity of liquid chromatography-mass spectrometry is rarely investigated. This work discussed the mathematical selectivity of liquid chromatography-mass spectrometry by three-way calibration based on the trilinear model, with an application to quantitative analysis of coeluting aromatic amino acids in human plasma. By the trilinear decomposition of the constructed liquid chromatography-mass spectrometry-sample trilinear model and individual regression of the decomposed relative intensity versus concentration, the proposed three-way calibration method successfully achieved quantitative analysis of coeluting aromatic amino acids in human plasma, even in the presence of uncalibrated interferent(s) and a varying background. This analytical method can ease the requirements for sample preparation and complete chromatographic separation of components, reduce the use of organic solvents, decrease the time of chromatographic separation, and increase the peak capacity of liquid chromatography-mass spectrometry. As a "green analytical method", the liquid chromatography-mass spectrometry three-way calibration method can provide a promising tool for direct and fast quantitative analysis in complex systems containing uncalibrated spectral interferents, especially for the situation where the coelution problem is difficult to overcome.

Bisphenol-A (BPA) in Foods commonly consumed in Southwest Nigeria and its Human Health Risk

Bisphenol-A (BPA) is a synthetic chemical ubiquitous in the environment and listed as an endocrine disruptor. It has the tendency of migrating into food stored in materials containing it. This study, therefore, determines the concentrations of BPA in foods commonly consumed in Southwest Nigeria by the adult population and also estimates the risk associated with human exposure. Eight different food categories were selected for this study. Standard QuEChERS protocol was used for sample extraction and analysed using gas chromatography-mass spectrometry (GC-MS). Vegetable oil had the highest BPA concentration (28.4 ng/g). This was followed by aquatic canned fish (26.3 ng/g), canned beef (21.3 ng/g) and crayfish (17.5 ng/g). These concentrations were below the 600 ng/g limit of the European Commission for BPA in foods. Bisphenol-A was not detected in raw beef, chicken, cheese, apple, tomatoes, beans and rice; and chicken eggs. The adult population had an average dietary intake of 30.4 ng/kg bw/day. There is no likely occurrence of harmful health effects of BPA in the selected foods with respect to the current concentrations found therein. However, routine monitoring is recommended to prevent human exposure to BPA.

Simultaneous and fast determination of bisphenol A and diphenyl carbonate in polycarbonate plastics by using excitation-emission matrix fluorescence couples with second-order calibration method

A new strategy for the determination of bisphenol A (BPA) and diphenyl carbonate (DPC) in polycarbonate plastics has been proposed, combing excitation-emission matrix fluorescence and second-order chemometrics methods. The studied compounds are two of the most frequently used chemical raw materials and intermediates, which is mainly used for bio-chemical products. The method is fast and sensitive as it can avoid tedious pretreatment steps and large amounts of organic solvents consumption. Chemometrics allowed accurate and precise quantification of two target analytes even in the presence of severe spectral overlap, unknown and background interferences, which benefit from "second-order advantages" provided by chemometrics multivariate calibration. Reasonable quantification results were obtained in real plastics samples, with limits of detection for two analytes were 0.04 and 1.18 × 10³ ng mL^-1 and limits of quantitation were 0.11 and 3.58 × 10³ ng mL^-1. In addition, the average recoveries for BPA and DPC were 99.35% and 83.50% with relative standard deviation <2.30%. It was proved that the proposed method can be a useful and sensitive tool to the determination of BPA and DPC in different polycarbonate plastics with a simple sample pretreatment at low cost.

Validated chemometrics-assisted spectrophotometric methods for simultaneous determination of bisphenol-A-diglycidyl ether and some of its reaction products in canned foods in the Egyptian market

Two multivariate calibration methods, namely principal component regression (PCR) and partial least squares (PLS-2) have been developed, validated and compared for the simultaneous determination of bisphenol-A-diglycidyl ether (BADGE) and some of its reaction products, including BADGE·HCl·H₂O, BADGE·H₂O and BADGE·2HCl. Chemometrics allowed rapid, accurate and precise simultaneous quantification of the analytes of interest which was not possible by other spectrophotometric methods due to their severe spectral overlap. PCR and PLS-2 techniques successfully quantified BADGE, BADGE·HCl·H₂O, BADGE·H₂O and BADGE·2HCl in the ranges of 1.4-3.4, 1-5, 1-4.2 and 1-7 μg mL^-1, respectively. The constructed models were validated according to the International Conference on Harmonization guidelines and successfully applied for the determination of these compounds in pure form, laboratory prepared mixtures and in various types of canned foods following the limits and regulations of the European Union (EU) where satisfactory recovery results were obtained.

A magnetic cellulose-based carbon fiber hybrid as a dispersive solid-phase extraction material for the simultaneous detection of six bisphenol analogs from environmental samples

A hollow porous NiMn2O4 nanosphere-decorated cellulose-based carbon fiber (CCF, using recyclable cotton wool as the carbon fiber source) hybrid was fabricated via a relatively green and eco-friendly hydrothermal synthetic route, followed by calcination treatment. The in situ growth of hollow porous NiMn2O4 on the CCFs led to it being decorated over the CCF surface uniformly. The NiMn2O4/CCFs hybrid displayed excellent extraction capabilities and magnetic reusability. Benefiting from its high porosity, large specific surface area, and superior chemical affinities to bisphenol analogs (BPs), and the synergistic effect between NiMn2O4 and CCFs, NiMn2O4/CCFs as an adsorbent was applied to the extraction of low concentrations of BP compounds, displaying excellent extraction capabilities. A magnetic dispersive solid phase extraction (MDSPE) method combined with HPLC was developed for detecting six BPs in real environmental samples. Under optimal conditions, the detection limits and recoveries were 0.56-0.83 ng mL-1 and 84.3-103.5% (RSD ≤ 4.5%). It was confirmed that NiMn2O4/CCFs was a type of rapid and high efficiency MDSPE material for the analysis of multiple BP compounds in environmental samples.

Optimum pH for the determination of bisphenols and their corresponding diglycidyl ethers by gas chromatography-mass spectrometry. Migration kinetics of bisphenol A from polycarbonate glasses

This paper presents, on the one hand, the study of the influence of the pH of the medium on the determination of bisphenol F (BPF), bisphenol A (BPA) and their corresponding diglycidyl ethers (BFDGE and BADGE, respectively) by GC-MS after a solid-phase extraction step, using BPA-d16 as internal standard and Parallel Factor Analysis (PARAFAC) decomposition as a multi-way tool for the unequivocal identification and quantification of the four analytes. As the structure of both BFDGE and BADGE has two 2,3-epoxypropoxy groups that can undergo an acid- or base-catalyzed ring-opening via nucleophilic substitution reactions, several samples spiked with the four analytes were set to different pH values between 2 and 12. The best results were obtained in the pH region 8-10, being 9 the most suitable value. Coelution of interferents was overcome using the PARAFAC decomposition; otherwise, the presence of some analytes could not have been ensured according to the regulations currently in force. Secondly, the release of BPA from polycarbonate glasses into food simulant D1 (ethanol 50% (v/v)) over time was studied through seven migration tests and the differences found in this migration process with the incubation temperature (50 and 70°C) were evaluated. A nonlinear regression was used to fit the experimental data following an exponential relation between the concentration of BPA transferred from every glass and the respective migration test. None of the quantities of BPA released exceeded the specific migration limit of 0.6mgkg(-1) laid down for this compound in the Commission Regulation (EU) No 10/2011, so the compliance of the glasses evaluated was ensured. The average recovery percentages of the four analytes at a fortification level of 800ngL(-1) ranged from 50.14 to 92.75%. The detection capability (CCβ) of the method for BPA was 2.60μgL(-1) for n=2 replicates, with probabilities of false positive and false negative fixed at 0.05.

Simultaneous determination of endocrine disrupting compounds bisphenol F and bisphenol AF using carboxyl functionalized multi-walled carbon nanotubes modified electrode

A novel, simple and selective electrochemical method was developed for simultaneous determination of bisphenol F (BPF) and bisphenol AF (BPAF) in aqueous media (phosphate buffer solution, pH 6.0) on carboxyl functionalized multi-walled carbon nanotubes modified glassy carbon electrode (MWCNT-COOH/GCE) using differential pulse voltammetry (DPV). In DPV, MWCNT-COOH/GCE could separate the oxidation peak potentials of BPF and BPAF present in the same solution though, at the bare GCE, the peak potentials were indistinguishable. The results showed that the electrochemical sensor exhibited excellent electrocatalytic activity towards the oxidation of the two analytes. The peak current in DPV of BPF and BPAF increased linearly with their concentration in the ranges of 0.6-1.6 mmol/L BPF and 0.6-1.6 mmol/L BPAF. The detection limits were 0.1243 mmol/L and 0.1742 mmol/L (S/N=3) correspondingly. The modified electrode was successfully used to simultaneously determine BPF and BPAF in real samples.