Development of solid-phase microextraction with multiple interactions-based monolithic fibers for the sensitive determination of perfluoroalkyl phosphonic acids in water and vegetable samples

Practicality evaluation of novel microextraction techniques for the determination of PFAS in food and water samples using the Blue Applicability Grade Index

BACKGROUND

Due to their high stability, persistence, and non-degradability, per- and polyfluoroalkyl substances (PFAS) are considered to be "forever chemicals" that can be present in a wide range of samples. Towards the development of novel analytical strategies for the reduction of the environmental impact of the analytical scheme, a plethora of novel solid-phase microextraction and miniaturized extraction techniques have been proposed for the determination of PFAS. However, the evaluation of the applicability of these protocols in terms of their practicality is still scarce.

RESULTS

In this article, the Blue Analytical Grade Index (BAGI) was used to evaluate the practicality of the sorbent-based microextraction techniques that were developed during the last decade for PFAS. In total thirty-four protocols were evaluated, resulting in a minimum score of 50.0 and a maximum score of 77.5.

SIGNIFICANCE

These findings clearly indicate that there is significant room for improvement and there is still a need for the development of microextraction approaches with higher practicality. Moreover, with regards to the best-performing protocols, their greenness was also assessed using the AGREEprep metric to enable a more comprehensive comparison.

An overview on human exposure, toxicity, solid-phase microextraction and adsorptive removal of perfluoroalkyl carboxylic acids (PFCAs) from water matrices

Perfluoroalkyl carboxylic acids (PFCAs) are sub-class of perfluoroalkyl substances commonly detected in water matrices. They are persistent in the environment, hence highly toxic to living organisms. Their occurrence at trace amount, complex nature and prone to matrix interference make their extraction and detection a challenge. This study consolidates current advancements in solid-phase extraction (SPE) techniques for the trace-level analysis of PFCAs from water matrices. The advantages of the methods in terms of ease of applications, low-cost, robustness, low solvents consumption, high pre-concentration factors, better extraction efficiency, good selectivity and recovery of the analytes have been emphasized. The article also demonstrated effectiveness of some porous materials for the adsorptive removal of the PFCAs from the water matrices. Mechanisms of the SPE/adsorption techniques have been discussed. The success and limitations of the processes have been elucidated.

Evaluation of the research trends on perfluorinated compounds using bibliometric analysis: knowledge gap and future perspectives

Detection of perfluorinated compounds (PFCs) in the environment has been a global concern because of the risk they pose due to their endocrine-disruptive properties. This study analyzed the global trends and research productivity of PFCs from 1990 to 2021. A total number of 3256 articles on PFCs were retrieved from the Web of Science focusing on different environmental and biological matrices. An increase in the productivity of research on PFCs was observed during the survey period which indicates that more research and publications on this class of contaminants are expected in the future. Evaluating the most productive countries and the number of citations per country on PFCs research shows that China and the United States of America were ranked in first and second places. It was also observed that research on PFCs received the most attention from scientists in developed countries, with little research emerging from Africa. Hence, research on PFCs in developing countries, especially low-income countries should be promoted. Consequently, more research programs should be implemented to investigate PFCs in countries and regions where research on these contaminants is low. The study will help researchers, government agencies and policymakers to tailor future research, allocation of funds to PFCs research and countries' collaboration.

Enhanced performance of ZIF-8 nanocrystals hybrid monolithic composites via an in-situ growth strategy for efficient capillary microextraction of perfluoroalkyl phosphonic acids

Enrichment of perfluoroalkyl phosphonic acids (PFPAs) is of great significance and challenging for environmental monitoring, due to their toxic and persistent nature, highly fluorinated character as well as low concentration. Herein, novel metal-organic frameworks (MOFs) hybrid monolithic composites were prepared via metal oxide-mediated in situ growth strategy and utilized for capillary microextraction (CME) of PFPAs. A porous pristine monolith was initially obtained by copolymerization of the zinc oxide nanoparticles (ZnO-NPs)-dispersed methacrylic acid (MAA) with ethylenedimethacrylate (EDMA) and dodecafluoroheptyl acrylate (DFA). Afterwards, nanoscale-facilitated transformation of ZnO nanocrystals into the zeolitic imidazolate framework-8 (ZIF-8) nanocrystals was successfully realized via the dissolution-precipitation of the embedded ZnO-NPs in the precursor monolith in the presence of 2-methylimidazole. Experimental and spectroscopic results (SEM, N₂ adsorption-desorption, FT-IR, XPS) revealed that the coating of ZIF-8 nanocrystals significantly increased the surface area of the obtained ZIF-8 hybrid monolith and endowed the material abundant surface-localized unsaturated zinc sites. The proposed adsorbent showed highly enhanced extraction performance for PFPAs in CME, which was mainly ascribed to the strong fluorine affinity, Lewis acid/base complexing, anion-exchange, and weakly π-CF interaction. The coupling of CME with LC-MS enables effective and sensitive analysis of ultra-trace PFPAs in environment water and human serum. The coupling method demonstrated low detection limits (2.16-4.12 ng L^-1) with satisfactory recoveries (82.0-108.0%) and precision (RSDs ≤6.2%). This work offered a versatile route to design and fabricate selective materials for emerging contaminant enrichment in complicated matrices.

Carbon aerogel as a solid-phase microextraction fiber coating for the extraction and detection of trace tetracycline residues in food by coupling with high-performance liquid chromatography

A direct immersion solid-phase microextraction method for determining tetracyclines (TCs) was developed by coupling with high-performance liquid chromatography. A carbon aerogel (CA) was synthesized as a fiber coating with high extractive properties and a low density of 0.1855 g cm-3via ambient pressure drying and carbonization. The as-synthesized CA exhibited a high specific surface area and a cross-linked structure; it was characterized via scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analysis, etc. The extraction performance for six TCs was investigated, and the main experimental parameters were optimized by the Box-Behnken design. Adsorption kinetics, Langmuir and Freundlich models were used to clarify the extraction mechanism. This method showed wide linear ranges of 1-500 μg L-1, low limits of detection of 0.52-1.05 μg L-1, good repeatability of 1.37-12.47%, and satisfactory inter-fiber reproducibility of 8.51-15.81% relative standard deviation for the detection of six TCs. Moreover, this study provided an interesting insight into the detection of TCs residues in food samples.

Magnetic dual-template molecularly imprinted polymer based on syringe-to-syringe magnetic solid-phase microextraction for selective enrichment of p-Coumaric acid and ferulic acid from pomegranate, grape, and orange samples

Magnetic dual-template molecularly imprinted polymer (Fe3O4@SiO2-MDMIP) was prepared to enrich and determine both p-Coumaric acid (p-CA) and ferulic acid (FA) based on syringe-to-syringe magnetic solid-phase microextraction (SS-MSPME). The obtained MDMIP was characterized and recognized, and then its adsorbing performance was studied. Based on the results, the Fe3O4@SiO2-MDMIP indicated selective recognition towards p-CA and FA with large adsorption capacity. The optimization of MDMIP-SS-MSPME conditions (pH, Fe3O4@SiO2-MDMIP mass, NaCl concentration, number of cycle, and elution volume) were conducted using the central composite design (CCD). Under the optimum conditions, an effectual and a convenient method was established to determine p-CA and FA in pomegranate, grapes, and orange samples based on SS-MSPME coupling with high-performance liquid chromatography-ultraviolet (HPLC-UV). Our developed method showed the limit of detection (LOD) of 0.08 ng mL-1 for p-CA and 0.07 ng mL-1 for FA. The method also indicated good linearity with R2 > 0.99 and good recoveries of 85.12-94.96% with RSDs ≤ 5.58% spiked at three various concentration levels in pomegranate, grapes, and orange samples.