Mercury speciation in edible seaweed by liquid chromatography - Inductively coupled plasma mass spectrometry after ionic imprinted polymer-solid phase extraction

Preparation of octyl-modified silica isoporous membrane for hydrophobic enrichment and electrochemical detection of methylmercury in aquatic products

Methylmercury (CH3Hg+), a lipophilic environmental pollutant, accumulates in fish, shellfish, and other organisms, posing significant risks to human health through the food chain. Developing a convenient and sensitive analytical method for CH3Hg+ detection is crucial for reducing costs and enhancing the efficiency of food safety testing. In this study, we prepared an octyl-modified silica isoporous membrane on the indium tin oxide (ITO) electrode (Octyl-SIM/ITO) via the electrochemical-assisted self-assembly (EASA) method using octyltrimethoxysilane (O-TES) as the functional organosilane. The Octyl-SIM/ITO electrode exhibits vertically-ordered nanochannels and strong hydrophobic affinity, enabling selective penetration and enrichment of weakly polar analytes. Utilizing square wave anodic stripping voltammetry (SWASV), the Octyl-SIM/ITO electrode demonstrates superior electrochemical response signals for CH3Hg+ detection, achieving a detection limit as low as 4 nM. This method allows for accurate and reproducible detection of CH3Hg+ in fish and oyster samples with minimal sample preparation, offering promising potential for portable in situ detection.

Global seafood production practices and trade patterns contribute to disparities in exposure to methylmercury

Seafood consumption is a major pathway for exposure to methylmercury (MeHg), a globally pervasive neurotoxin. Yet, how upstream processes in the seafood value chain influence MeHg exposure remains poorly understood. Here we quantified MeHg in seafood production, trade and consumption in 2019 around the world. We found that countries with seafood-MeHg exposures beyond the recommended threshold by the World Health Organization were predominately high-income countries. These countries experienced a tenfold increase in exposure levels compared with low-income countries, due to greater consumption and long-overlooked higher MeHg concentrations in seafood inherited from production. Notably, 43% of seafood MeHg in production was redistributed through seafood trade, marked by inequality, as exports from high-income to lower-income countries contained higher seafood-MeHg concentrations. These exposures may have resulted in 61,800 global premature deaths and economic losses of around US$2.87 trillion, underscoring the need to change seafood production practices and trade patterns.

Amide/urea-based simple fluorometric receptors for iodide and Hg2+ ions in aqueous medium: Aggregation induced emission and DFT studies

Herein, we report pyrene-tagged amide and urea-based sugar derivatives 1 and 2 in a simple synthetic pathway to recognize I- and Hg2+ ions. Both molecules showed absorbance and fluorescence selectivity towards iodide ions in THF/H2O (7/3, v/v) medium. The selectivity and sensitivity of 2 for iodide ions are superior to 1 due to more H-bond donors in 2. Interestingly, fluorometric receptor 2 exhibited aggregation-induced emission (AIE) at higher pH with a remarkable fluorometric color change. The AIE phenomenon might be explained by the self-association of 2 after forming imine functionality in the alkali medium. The Stern-Volmer plot showed the fluorescence quenching constant of each receptor with an iodide ion and indicated the quenching pathway. The LODs of 1 and 2 for iodide ions were evaluated as 0.84 and 0.17 µM, respectively. The 1:1 binding stoichiometry of 1 or 2 with iodide was found from the Job plot and verified by measuring the complex mass. Further, the complexes of each receptor with I- ions can detect Hg2+ ions selectively by fluorescence turn-on method with low sensitivities (LODs: 0.008 µM for 1 and 0.01 µM for 2). DFT results were used to understand the binding mode of receptors 1 and 2 with iodide ions and the quenching process in the aqueous THF medium. The real application of the receptors was established for the recovery of iodide and Hg2+ ions from natural water samples.

The characteristic and bio-accessibility evaluation of mercury species in various kinds of seafood collected from Fujian of China for mercury risk assessment

Seafood consumption is the major source of total Hg (tHg) and methyl mercury (MeHg) for humans. Lack of broad-representative bio-accessibility of mercury species makes accurate assessment on health risk of seafood's mercury impossible. Herein, the concentrations and in vitro bio-accessibilities of mercury species in 93 seafood samples with 71 different species were extensively investigated. Results indicated that all shellfish and fish samples, and most seaweed samples contained both Hg2+ and MeHg, while some seaweed samples contained only Hg2+. The concentrations of mercury species varied depending on the differences in species/individuals of seafood and sampling regions. MeHg in seafood can be partly de-methylated into Hg2+ during gastrointestinal digestion, which reduced the toxicity of mercury in seafood. The mean demethylation rate of MeHg varied as follows: seaweeds (⁓62.1 %) > shellfishes/shrimps (⁓19.7 %) > fishes (⁓9.2 %). The mean bio-accessibility of Hg2+ and tHg varied as follows: seaweeds (⁓97.7 % and ⁓90.1 %) > shellfishes/shrimps (⁓65.1 % and ⁓67.9 %) ≈ fishes (⁓65.1 % and ⁓66.7 %), while that of MeHg varied as follows: fishes (⁓57.7 %) > shellfishes/shrimps (50.8 %) > seaweeds (⁓11.6 %). The simulated calculation of target hazard quotient (THQ) revealed that the health risk of seafood's mercury may be accurately assessed using tHg, not mercury species, even without considering bio-accessibility. This offers a simple but protective approach for assessing the health risk of seafood's mercury. Results of this study provide the potential broad-representative bio-accessibilities of mercury species existing in various kinds of seafood and novel insights for scientifically assessing the health risk of seafood's mercury and revising the mercury limitation in seafood.

Accurate and rapid mercury susceptibility detection in aquatic samples using fluorescent probe integrated rhodamine with pyridyl isothiocyanate

Mercury, one of the various harmful metals, is particularly significant in affecting aquatic organisms, currently gaining more attentions and sparking discussions. In response to the limitations of traditional detections, fluorescent probes have emerged as a promising solution with some advantages, such as weaker background interference, shorter processing time, higher accuracy. Thus, a novel fluorescent probe, FS-Hg-1, has been developed for assessing mercury ion (Hg2+) concentrations in aquatic products. This probe displays specific recognition of mercury ions in fluorescence spectra. Notably, FS-Hg-1 exhibits a distinct color change to pink when combined with Hg2+ (with a 948-fold increase in absorption at 568 nm) and a substantial fluorescence change towards Hg2+ (361-fold increase, excitation at 562 nm, emission at 594 nm) in N, N-dimethylformamide. The probe boasts a detection limit of 0.14 μM and rapid reaction with Hg2+ within 10 s, showing an excellent linear correlation with [Hg2+] in the range of 0 to 10 μM. Through thorough analysis using FS-Hg-1, the results align with those from the standard method (P > 0.05), with spiked recovery rates ranging from 108.4% to 113.2%. With its precise recognition, low detection limit, and remarkable sensitivity, this fluorescent assay proves effective in mercury concentration determination in aquatic samples without interference. The potential of FS-Hg-1 is promising for speedy detection of residual Hg2+ and holds significance in ensuring food safety.

Xanthan gum-capped Chromia Nanoparticles (XG-CrNPs): A promising nanoprobe for the detection of heavy metal ions

The present study reports on the selective and sensitive detection of metals using xanthan gum-capped chromia nanoparticles (XG-CrNPs). The nanoparticles were synthesized by the chemical reduction method using sodium borohydride and xanthan gum as the reducing and capping agents, respectively. The synthesis of XG-CrNPs was confirmed by the appearance of the two absorption peaks at 272 nm and 371 nm in the UV-visible region. The nanoparticles have been extensively characterized by FTIR, TEM-EDX, XRD, and TGA analyses. The well-dispersed XG-CrNPs exhibited a quasi-spherical structure with an average particle size of 3 nm. A significantly low amount (2 μg/L) of XG-CrNPs was used for selective and sensitive detection of heavy metal ions. It showed excellent metal detecting properties by quenching its band gap signal which was extraordinarily conspicuous for Co(II), Hg(II), and Cd(II) in comparison to other metal ions like Ag(I), Ba(II), Mg(II), Mn(II), Ni(II), and Zn(II). The limit of detection of Co(II), Cd(II), and Hg(II) with this nanoprobe was found to be 2.167 μM, 1.065 μM, and 0.601 μM respectively. The nanoparticles manifested higher shelf-life and can be reused up to three consecutive cycles where most of its activity was conserved even after being used. Thus, it may find use in metal sensor devices for the detection of hazardous metals.

Polymeric Materials in Speciation Analysis Based on Solid-Phase Extraction

Speciation analysis is a relevant topic since the (eco)toxicity, bioavailability, bio (geo)chemical cycles, and mobility of a given element depend on its chemical forms (oxidation state, organic ligands, etc.). The reliability of analytical results for chemical species of elements depends mostly on the maintaining of their stability during the sample pretreatment step and on the selectivity of further separation step. Solid-phase extraction (SPE) is a matter of choice as the most suitable and widely used procedure for both enrichment of chemical species of elements and their separation. The features of sorbent material are of great importance to ensure extraction efficiency from one side and selectivity from the other side of the SPE procedure. This review presents an update on the application of polymeric materials in solid-phase extraction used in nonchromatographic methods for speciation analysis.

Determination of lead in Gentiana rigescens and evaluation of the effect of lead exposure on the liver protection of the natural medicine

In this work, ultrasound-assisted rapidly synergistic cloud point extraction (UARS-CPE) and inductively coupled plasma optical emission spectrometry (ICP-OES) were combined to determine trace Pb in Gentiana rigescens Franch. ex Hemsl. (G. rigescens) samples. Under the optimal conditions, the enhancement factor (EF), limit of detection (LOD), limit of quantitation (LOQ) and precision were 33, 0.11 μg L^-1, 0.37 μg L^-1 and 1.3%, respectively. This method was applied to the analysis of G. rigescens samples, and the outcomes were in good agreement with the results determined by inductively coupled plasma mass spectrometry (ICP-MS). A mice model of immune liver injury induced by concanavalin A (ConA) was established, and the liver protection of G. rigescens and gentiopicroside (GPS) on it and the effects of various dosages of Pb exposure on its liver protection were studied. Pb at a dosage of 5 mg kg^-1 had little effect on the liver protection of G. rigescens and GPS, while 25, 125 mg kg^-1 dosages of Pb could significantly attenuate the liver protection of both. In addition, it aggravated the necrosis of hepatocytes and inflammatory cell infiltration, and these effects were dose-dependent.

Precipitation Polymerization: A Powerful Tool for Preparation of Uniform Polymer Particles

Precipitation polymerization (PP) is a powerful tool to prepare various types of uniform polymer particles owing to its outstanding advantages of easy operation and the absence of any surfactant. Several PP approaches have been developed up to now, including traditional thermo-induced precipitation polymerization (TRPP), distillation precipitation polymerization (DPP), reflux precipitation polymerization (RPP), photoinduced precipitation polymerization (PPP), solvothermal precipitation polymerization (SPP), controlled/‘‘living’’ radical precipitation polymerization (CRPP) and self-stabilized precipitation polymerization (2SPP). In this review, a general introduction to the categories, mechanisms, and applications of precipitation polymerization and the recent developments are presented, proving that PP has great potential to become one of the most attractive polymerization techniques in materials science and bio-medical areas.

Integration detection of mercury(ii) and GSH with a fluorescent "on-off-on" switch sensor based on nitrogen, sulfur co-doped carbon dots

Using aurine and citric acid as precursors, we have synthesized stable blue-fluorescent nitrogen and sulfur co-doped carbon dots (NS-CDs), with a high quantum yield of up to 68.94% via a thermal lysis method. The fluorescent NS-CDs were employed as a sensitive sensor for the integration detection of Hg2+ and glutathione (GSH). This was attributed to Hg2+ effectively quenching the fluorescence of the NS-CDs by static quenching, and then GSH was able to recover the fluorescence owing to the stronger binding between Hg2+ and the sulfhydryl of GSH. Based on the "on-off-on" tactic, the detection limits of Hg2+ ions and GSH were 50 nM and 67 nM respectively. The fluorescence sensor was successfully applied to detect Hg2+ ions and GSH in actual samples (tap water and fetal bovine serum). Furthermore, we have proved that the sensor had good reversibility. Overall, our NS-CDs can serve as effective sensors for environmental and biological analysis in the future.

A silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer for the selective aqueous decontamination of heavy metal ions

A novel adsorbent comprising a silanized magnetic amino-functionalized carbon nanotube-based multi-ion imprinted polymer is introduced as an ideal candidate for the simultaneous and selective adsorptive remediation of heavy metal ions from contaminated water.

Fluorescence Based Comparative Sensing Behavior of the Nano-Composites of SiO2 and TiO2 towards Toxic Hg2+ Ions

We have synthesized sulfonamide based nano-composites of SiO2 and TiO2 for selective and sensitive determination of toxic metal ion Hg2+ in aqueous medium. Nano-composites (11) and (12) were morphologically characterized with FT-IR, solid state NMR, UV-vis, FE SEM, TEM, EDX, BET, pXRD and elemental analysis. The comparative sensing behavior, pH effect and sensor concentrations were carried out with fluorescence signaling on spectrofluorometer and nano-composites (11) and (12), both were evaluated as "turn-on" fluorescence detector for the toxic Hg2+ ions. The LODs were calculated to be 41.2 and 18.8 nM, respectively of nano-composites (11) and (12). The detection limit of TiO2 based nano-composites was found comparatively lower than the SiO2 based nano-composites.

Recent application of molecular imprinting technique in food safety

Due to the extensive use of chemical substances such as pesticides, antibiotics and food additives, food safety issues have gradually attracted people's attention. The extensive use of these chemicals seriously damages human health. In order to detect trace chemical residues in food, researchers have to find several simple, economical and effective tools for qualitative and quantitative analysis. As a kind of material that specifically and selectively recognize template molecules from real samples, molecular imprinting technique (MIT) has widely applied in food samples analysis. This article mainly reviews the application of molecularly imprinted polymer (MIP) in the detection of chemical residues from food in the past five years. Some recent and novel methods for fabrication of MIP are reviewed. Their application of sample pretreatment, sensors, etc. in food analysis is reviewed. The application of molecular imprinting in chromatographic stationary phase is referred. Additionally, the challenges faced by MIP are discussed.

Saccharina latissima Cultivated in Northern Norway: Reduction of Potentially Toxic Elements during Processing in Relation to Cultivation Depth

There is an increasing interest in the use of Saccharina latissima (sugar kelp) as food, but the high iodine content in raw sugar kelp limits the daily recommended intake to relatively low levels. Processing strategies for iodine reduction are therefore needed. Boiling may reduce the iodine content effectively, but not predictably, since reductions from 38-94% have been reported. Thus, more information on which factors affect the reduction of iodine are needed. In this paper, sugar kelp cultivated at different depths were rinsed and boiled, to assess the effect of cultivation depth on the removal efficacy of potentially toxic elements (PTEs), especially iodine, cadmium, and arsenic, during processing. Raw kelp cultivated at 9 m contained significantly more iodine than kelp cultivated at 1 m, but the difference disappeared after processing. Furthermore, the content of cadmium and arsenic was not significantly affected by cultivation depth. The average reduction during rinsing and boiling was 85% for iodine and 43% for arsenic, but no significant amount of cadmium, lead, or mercury was removed. Cultivation depths determined the relative effect of processing on the iodine content, with a higher reduction for kelp cultivated at 9 m (87%) compared to 1 m (82%). When not taken into consideration, cultivation depth could mask small reductions in iodine content during rinsing or washing. Furthermore, since the final content of PTEs was not dependent on the cultivation depth, the type and extent of processing determines whether cultivation depth should be considered as a factor in cultivation infrastructure design and implementation, or alternatively, in product segmentation.

Tagetes erecta as an organic precursor: synthesis of highly fluorescent CQDs for the micromolar tracing of ferric ions in human blood serum

The present article illustrates the green synthesis of novel carbon quantum dots (CQDs) from biomass viz. Tagetes erecta (TE), and subsequently fabrication of a metal ion probe for the sensing of Fe³⁺ in real samples. TE-derived CQDs (TE-CQDs) have been synthesized by a facile, eco-friendly, bottom-up hydrothermal approach using TE as a carbon source. The successful synthesis and proper phase formation of the envisaged material has been confirmed by various characterization techniques (Raman, XRD, XPS, TEM, and EDS). Notably, the green synthesized TE-CQDs show biocompatibility, good solubility in aqueous media, and non-toxicity. The as-synthesized TE-CQDs show an intense photoluminescence peak at 425 nm and exhibit excitation dependent photoluminescence behavior. The proposed TE-CQD-based probe offers a remarkable fluorescence (FL) quenching for Fe³⁺ with high selectivity (K_q ∼ 10.022 × 10¹³ M⁻¹ s⁻¹) and a sensitive/rapid response in a linear concentration range 0–90 μM (regression coefficient R² ∼ 0.99) for the detection of Fe³⁺. The limit of detection (LOD) of the probe for Fe³⁺ has been found as 0.37 μM in the standard solution. It has further been applied for the detection of Fe³⁺ in real samples (human blood serum) and displays good performance with LOD ∼ 0.36 μM. The proposed TE-CQD-based ion sensing probe has potential prospects to be used effectively in biological studies and clinical diagnosis.

TE-CQDs synthesized via the hydrothermal method for the detection of Fe³⁺ in HBS.

Ultrasound-assisted dual-cloud point extraction with high-performance liquid chromatography-hydride generation atomic fluorescence spectrometry for mercury speciation analysis in environmental water and soil samples

A method for simultaneous preconcentration and determination of mercury species in water and soil samples was established using high-performance liquid chromatography with hydride generation atomic fluorescence spectrometry after ultrasound-assisted dual-cloud point extraction. The extraction process was divided into two steps. In the first cloud point extraction, inorganic mercury and methylmercury formed chelates with sodium diethyldithiocarbamate and were extracted into Triton X-114 micelles. In the second stage, a displacement reaction between sodium diethyldithiocarbamate-inorganic mercury/methylmercury and l-cysteine occurred, and the analytes entered the l-cysteine aqueous solution under ultrasonication. This aqueous solution was directly introduced to the high-performance liquid chromatography with hydride generation atomic fluorescence spectrometry and the detection was completed within 6 min. Under the optimum experimental conditions, the linear range was 0.10-5.0 μg/L (r ≥0.9993) for inorganic mercury and methylmercury, and the enhancement factors were 15.7 for inorganic mercury and 6.35 for methylmercury. The limits of detection for inorganic mercury and methylmercury were 0.004 and 0.016 μg/L, respectively. The approach was successfully applied to the determination of trace inorganic mercury and methylmercury in water and soil samples with good recoveries (85.3-110%). This method solved the problem of peak fusion of the two analytes and was successfully applied to the speciation analysis of mercury.

Rational Design of an Ion-Imprinted Polymer for Aqueous Methylmercury Sorption

Methylmercury (MeHg+) is a mercury species that is very toxic for humans, and its monitoring and sorption from environmental samples of water are a public health concern. In this work, a combination of theory and experiment was used to rationally synthesize an ion-imprinted polymer (IIP) with the aim of the extraction of MeHg+ from samples of water. Interactions among MeHg+ and possible reaction components in the pre-polymerization stage were studied by computational simulation using density functional theory. Accordingly, 2-mercaptobenzimidazole (MBI) and 2-mercaptobenzothiazole (MBT), acrylic acid (AA) and ethanol were predicted as excellent sulfhydryl ligands, a functional monomer and porogenic solvent, respectively. Characterization studies by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) revealed the obtention of porous materials with specific surface areas of 11 m2 g-1 (IIP-MBI-AA) and 5.3 m2 g-1 (IIP-MBT-AA). Under optimized conditions, the maximum adsorption capacities were 157 µg g-1 (for IIP-MBI-AA) and 457 µg g-1 (for IIP-MBT-AA). The IIP-MBT-AA was selected for further experiments and application, and the selectivity coefficients were MeHg+/Hg2+ (0.86), MeHg+/Cd2+ (260), MeHg+/Pb2+ (288) and MeHg+/Zn2+ (1510), highlighting the material's high affinity for MeHg+. The IIP was successfully applied to the sorption of MeHg+ in river and tap water samples at environmentally relevant concentrations.