Novel polymeric metal complexes as dye sensitizers for Dye-sensitized solar cells based on poly thiophene containing complexes of 8-hydroxyquinoline with Zn(II),Cu(II) and Eu(III) in the side chain

A Fascinating Trip into Iron and Copper Dyes for DSSCs

The production of electricity in a greener and more sustainable way by employing renewable sources is a great challenge in modern times. Photovoltaic systems represent an important possibility because sunlight is the most abundant renewable source. In this review article, recent studies (from 2018 to the present) involving novel iron and copper complexes employed as dyes in Dye-Sensitized Solar Cells (DSSCs) are reported; mono- and bimetallic Fe complexes, Cu-based dyes, and devices presenting both metals are discussed, together with the performances of the DSSCs reported in the papers and the corresponding values of the main parameters employed to characterize such solar cells. The feasibility of DSSCs employing copper and iron dyes, alone or in combination with other earth-abundant metals, is demonstrated. The proper optimization of the sensitizers, together with that of the electrolyte and of the semiconducting layer, will likely lead to the development of highly performing and cheap photovoltaic devices for future applications on a much larger scale.

A study on the spectroscopic, energy band, and optoelectronic properties of α,ω-dihexylsexithiophene/tris(8-hydroxyquinolinate) gallium blends; DH6T/Gaq3 composite system

In this work the optical response, spectroscopic behaviour, and optoelectronic properties of solution and solid state composite systems based on α,ω-dihexylsexithiophene/tris(8-hydroxyquinolinate) gallium (DH6T/Gaq3) are studied upon the incorporation of different molar percentages of Gaq3. UV-vis, PL, FTIR spectrophotometers and SEM technique were utilized to perform the investigations. The results showed a reduced energy band (Eg) (from 2.33eV to 1.83eV) and a broadened absorption spectrum for the blend system when 29.8% molar of Gaq3 was incorporated. These were attributed to the enhanced intermolecular interactions that are brought about by the increased strength of π-π overlap between the molecular moieties. A mathematical formula was developed to interpret the non-monotonic change occurred in Eg, while numerical calculations have been made to assign the type and nature of the electronic transitions governing the spectroscopic behaviour of the system. The results were elaborated and comprehensively discussed in terms of the exciton generation, energy band theory, molecular interactions, and spatial geometry.

Novel dye sensitizers of polymeric metal complexes with benzodithiophene derivatives as donor and their photovoltaic performance

Four novel donor-acceptor (D-A) type conjugated polymeric metal complexes (P1-P4) bearing benzodithiophene or carbazole derivative as donors were synthesized, characterized and applied as dye sensitizers in dye-sensitized solar cells (DSSCs). Salicylaldehyde derivative complexes acted as electron acceptors, Zn(II) or Cd(II) was chosen as the coordinated metal ion, and diaminomaleonitrile was ancillary ligand in these structures. The thermal, photophysical, electrochemical and photovoltaic properties of these polymeric metal complexes were investigated by FT-IR, GPC, TGA, DSC, UV-Vis absorption spectroscopy, elemental analysis, cyclic voltammetry (CV), J-V curves and IPCE plots. These polymer dyes exhibit good thermal stability for their application in DSSCs. The DSSC device based on P2 which contains benzodithiophene derivative as donor and Cd(II) as coordination ion, exhibited the highest power conversion efficiency of 2.43% (J(sc)=4.95 mA/cm(2), V(oc) =0.71 V, FF=69.3%) under AM 1.5 G solar irradiation. It indicates a new way to design dye sensitizers for DSSCs.

Thermal, dielectric characteristics and conduction mechanism of azodyes derived from quinoline and their copper complexes

A novel series of (5-(4'-derivatives phenyl azo)-8-hydroxy-7-quinolinecarboxaldehyde) (AQLn) (n=1, p-OCH3; n=2, R=H; and n=3; p-NO2) and their complexes [Cu(AQLn)2]·5H2O are synthesized and investigated. The optimized bond lengths, bond angles and the calculated quantum chemical parameters for AQLn are investigated. HOMO-LUMO energy gap, absolute electronegativities, chemical potentials, and absolute hardness are also calculated. The thermal properties, dielectric properties, alternating current conductivity (σac) and conduction mechanism are investigated in the frequency range 0.1-100kHz and temperature range 293-568K for AQL1-3 and 318-693K for [Cu(AQL1-3)2]·5H2O complexes. The thermal properties are of ligands (AQLn) and their Cu(II) complexes investigated by thermogravimetric analysis (TGA). The temperature and frequency dependence of the real and the imaginary part of the dielectric constant are studied. The values of the thermal activation energy of conduction mechanism for AQLn and their complexes [Cu(AQLn)2]·5H2O under investigation are calculated at different test frequencies. The values of thermal activation energies ΔE1 and ΔE2 for AQLn and [Cu(AQLn)2]·5H2O decrease with increasing the values of frequency. The ac conductivity is found to be depending on the chemical structure of the compounds. Different conduction mechanisms have been proposed to explain the obtained experimental data. The small polaron tunneling (SPT) is the dominant conduction mechanism for AQL1 and its complex [Cu(AQL1)2]·5H2O. The quantum mechanical tunneling (QMT) is the dominant conduction mechanism for AQL2 and its complex [Cu(AQL2)2]·5H2O. The correlated barrier hopping (CBH) is the dominant conduction mechanism for AQL3 and its complex [Cu(AQL3)2]·5H2O, and the values of the maximum barrier height (Wm) are calculated.

Synthesis, characterization and DFT study of methoxybenzylidene containing chromophores for DSSC materials

Novel tricyanovinyl derived from hydrazones have been prepared by the reaction of tetracyanoethylene and phenylethylidene hydrazone, and these dyes showed absorption in the region of 539-650 nm. The dyes showed pronounced solvatochromic effects as the polarity of the solvents changed. The torsion in E isomer is smaller than Z and azo isomers of MBD1 and MBD2. The HOMOs are delocalized on whole of the molecule while LUMOs are distributed on the tricarbonitrile. The LUMO energies are above the conduction band of TiO(2) and HOMOs of the dyes are below the redox couple of MBD1 and MBD2. The HOMO energies, LUMO energies and HOMO-LUMO energy gap of MBD1 and MBD2 are almost same. The absorption spectra of both the dyes in different solvents are approximately same except in cyclohexane.