Copper-catalyzed C–Se coupling of diphenyl diselenide with arylboronic acids at room temperature

Nucleophilic Selenocyclization Reaction of Benzodiynes Promoted by Sodium Selenide: Synthesis of Isoselenochromenes

We describe here the synthesis of isoselenochromenes via a nucleophilic selenocyclization reaction of benzodiynes with sodium selenide. The central parameters that affect this cyclization reaction were studied, and the best reaction conditions were applied to different substrates to determine the scope of the method. The results indicated that isoselenochromenes were obtained in higher yields when the reactions were performed by the addition of NaBH4 (3 equiv), at room temperature, under nitrogen atmosphere, to a solution of elemental selenium (2 equiv) in dimethylformamide (2 mL). After 1 h, a benzodiynes (0.25 mmol) solution in EtOH (3 mL) was added at room temperature. The reaction was stirred at 75 °C until the starting material was consumed. The best conditions were applied to benzodiynes having electron-rich, electron poor aromatic rings, and alkyl groups directly bonded to the alkynes. The same reaction condition was extended to isothiochromene derivatives but failed to prepare isotelurochromenes. The isoselenochromenes were easily transformed into three new classes of organoselenium compounds using classical methods available in the literature. We also conducted several control experiments to propose a reaction mechanism.

Magnetic mesocellular foams with nickel complexes: as efficient and reusable nanocatalysts for the synthesis of symmetrical and asymmetrical diaryl chalcogenides

In this work, magnetic mesocellular foam (M-MCF) silica nanoparticles were prepared via inserting magnetic nanoparticles into the pores of mesocellular foams, the inner surface of which was functionalized with a methionine-nickel complex (M-MCF@Met-Ni). The structure of the as-prepared nanocatalysts was studied by FT-IR spectroscopy, BET, TGA, VSM, SEM, HR-TEM, EDS, WDX, XRD, and ICP-OES techniques. Thereafter, this nanocatalyst was used as a new, effective, and magnetically reusable catalyst for C-S and C-Se bond formation under mild conditions. All corresponding products were prepared with good yields and appropriate turnover number (TON) and turnover frequency (TOF), which reveals the high activity of this magnetic nanocatalyst in both reactions. In addition, the recovery and hot filtration tests indicated that this catalyst could be simply separated from the reaction mixture using an outside magnet and reused five consecutive times without any significant loss of its catalyst activity or metal leaching.

UVA Light-promoted Catalyst-free Cyclization of Vinyl Selenides: Green and Efficient Synthesis of C3-Unsubstituted 2-Selanyl Benzochalcogenophenes

A metal- and catalyst-free photo-promoted cyclization of properly substituted vinyl selenides was developed using UVA irradiation. A total of eighteen new C3-unsubstituted 2-selanyl benzochalcogenophenes (benzofurans, benzothiophenes and benzoselenophenes) were prepared in 30-86% yield after irradiation with UVA at room temperature. The usefulness of the title compounds was demonstrated in the easy functionalization of the remaining free C-H bond of the benzochalcogenophenes to form new C-Se and C-Br bonds by simple procedures. Furthermore, the reaction can be performed under natural sunlight irradiation and the solvent is easily reused further in several subsequent runs.

Diorganyl diselenides: a powerful tool for the construction of selenium containing scaffolds

Organoselenium compounds find versatile applications in organic synthesis, materials synthesis, and ligand chemistry. Organoselenium heterocycles are widely studied agents with diverse applications in various biological processes. This review highlights the recent progress in the synthesis of selenium heterocycles using diorganyl diselenides with keen attention on green synthetic approaches, scopes, C-H selanylation, the mechanisms of different reactions and insights into the formation of metal complexes. The C-H selanylation using diorganyl diselenides with different catalysts, bases, transition metals, iodine salts, NIS, hypervalent iodine, and other reagents is summarised. Finally, the diverse binding modes of bis(2/4-pyridyl)diselenide with different metal complexes are also summarised.

A review on the role of transition metals in selenylation reactions

Organoselenium chemistry has emerged as a distinctive area of research with tremendous utility in the synthesis of biologically and pharmaceutically active molecules. Significant synthetic approaches have been made for the construction of C-Se bonds which find use in other organic transformations. This review focuses on the versatility of transition metal-mediated selenylation reactions, providing insights into various synthetic pathways and mechanistic details. Further, this review aims to offer a broad perspective for designing efficient and novel catalysts to incorporate organoselenium moiety into the inert C-H bonds.

Controllable Radical Polymerization of Selenide Functionalized Vinyl Monomers and Its Application in Redox Responsive Photonic Crystals

Selenium-containing monomer (p-phenylseleno) styrene (p-PhSeSt) is polymerized by reversible addition-fragmentation chain transfer polymerization. Polymer, (P(p-PhSeSt)), with controlled molecular weight and narrow molecular weight is obtained. The selenide moiety in obtained P(p-PhSeSt) can be selectively oxidized to selenoxide or selenone groups by H₂ O₂ or NaClO, respectively. These oxidized groups can be further reduced to selenide by Na₂ S₂ O₄ . The structure changing of polymers during such redox cycle is characterized by nuclear magnetic resonance, X-ray photoelectron spectroscopy, and size exclusion chromatography. Properties, such as thermal performance, glass transition temperature, water contact angles, and refractive indices, of the resulting polymers are systematically investigated before and after oxidation. In addition, SiO₂ inverse opal photonic crystal (IOPC) is fabricated by sacrificial polymer colloidal template method. Owing to changes of the RIs of P(p-PhSeSt) after selective oxidation, the predictable change of PC bandgap as a redox-responsive PC sensor is successfully realized, which provides new perspectives for modulating photonic crystals.

Recent Developments and Perspectives in the C-Se Cross Coupling Reactions

:

The C-Se bond forming reactions are attractive synthetic strategies for biochemists and synthetic chemists alike for the synthesis of various molecules that are of biological, pharmaceutical and material interest. Therefore, the design and synthesis of organoselenium compounds currently constitute engaging fundamental problems in applied chemistry both in pharmaceutical and academic laboratories. This review discusses the recent works reported in carbon–selenium cross-coupling reactions with the emphasis on the mechanistic aspects of the reactions. The reacting species, the addition of ligands, selection of catalysts, use of suitable solvents, proper setting of reaction time, are well discussed to understand the detailed mechanism. Various simple, economical and environmentally friendly protocols are demonstrated, which ensured product stability, low toxicity, environmentally benign and excellent reactivity for the synthesis of organoselenium compounds. This review covers the scientific literature from 2010 to 2019.

Advances in Cu and Ni-catalyzed Chan–Lam-type coupling: synthesis of diarylchalcogenides, Ar2–X (X = S, Se, Te)

Advances in the Cu and Ni-catalyzed Chan–Lam-type coupling of aryl/heteroarylboronic acids with various chalcogen sources for diarylsulfide, diarylselenide and diaryltelluride synthesis are covered in this review.

Copper-Promoted C-Se Cross-Coupling of 2-Selenohydantoins with Arylboronic Acids in an Open Flask

The modification of Chan-Lam-Evans cross-coupling reaction for the selective Se-arylation of 2-selenohydantoins under base-free mild conditions via aryl boronic acids is described herein. This approach was used to synthesize novel 5-arylidene-3-substituted-2-(arylselanyl)-imidazoline-4-ones with high yields. The anticancer activity of the final compounds was evaluated in vitro against different cancer cells, and thus, the possibility of 5-arylidene-3-substituted-2-(arylselanyl)-imidazoline-4-ones successful application as cytotoxic agents was demonstrated.

Arylation Chemistry for Bioconjugation

Bioconjugation chemistry has been used to prepare modified biomolecules with functions beyond what nature intended. Central to these techniques is the development of highly efficient and selective bioconjugation reactions that operate under mild, biomolecule compatible conditions. Methods that form a nucleophile-sp2 carbon bond show promise for creating bioconjugates with new modifications, sometimes resulting in molecules with unparalleled functions. Here we outline and review sulfur, nitrogen, selenium, oxygen, and carbon arylative bioconjugation strategies and their applications to modify peptides, proteins, sugars, and nucleic acids.

Selenium and Tellurium Electrophiles in Organic Synthesis

This chapter highlights the utility of electrophilic achiral and chiral organoselenium reagents in organic synthesis. A range of reactions from alkene functionalizations, the functionalization of aliphatic and aromatic C–H bonds using stoichiometric and catalytic approaches as well as rearrangement reactions are described. In addition, the utility of organotellurium reagents in organic synthesis is covered in this chapter.

Synthesis of high refractive index polymer with pendent selenium-containing maleimide and use as a redox sensor

A high refractive index polymer was synthesized by the copolymerization of styrene with different functionalizedN-phenyl maleimides, phenyloxide (P1), phenylsulfide (P2), and phenylselenide (P3).

Acid-catalyzed oxidative cleavage of S–S and Se–Se bonds with DEAD: efficient access to sulfides and selenides

An acid/DEAD system for oxidative cleavage of S–S and Se–Se bonds to generate chalcogenium ions has been developed. These ions could be captured by nucleophile-tethered alkenes and nucleophilic aryl reagents such as arylboronic acids and arenes to give chalcogenides.

Copper-Catalyzed Synthesis of Unsymmetrical Diorganyl Chalcogenides (Te/Se/S) from Boronic Acids under Solvent-Free Conditions

The efficient and mild copper-catalyzed synthesis of unsymmetrical diorganyl chalcogenides under ligand- and solvent-free conditions is described. The cross-coupling reaction was performed using aryl boric acids and 0.5 equiv. of diorganyl dichalcogenides (Te/Se/S) in the presence of 3 mol % of CuI and 3 equiv. of DMSO, under microwave irradiation. This new protocol allowed the preparation of several unsymmetrical diorganyl chalcogenides in good to excellent yields.

Copper-catalyzed ipso-selenation of aromatic carboxylic acids

Study of the synthesis of diaryl and methyl aryl selenides in good to excellent yields, including mechanistic studies and demonstration of the utility of the products in the facile synthesis of 10H-phenoselenazine and 11-methyldibenzo-(b,f)-1,4-selenazepine.

An Umpolung Approach for the Chemoselective Arylation of Selenocysteine in Unprotected Peptides

Herein we report an umpolung strategy for the bioconjugation of selenocysteine in unprotected peptides. This mild and operationally simple approach takes advantage of the electrophilic character of an oxidized selenocysteine (Se–S bond) to react with a nucleophilic arylboronic acid to provide the arylated selenocysteine within hours. This reaction is amenable to a wide range of boronic acids with different biorelevant functional groups and is unique to selenocysteine. Experimental evidence indicates that under oxidative conditions the arylated derivatives are more stable than the corresponding alkylated selenocysteine.

Application of organoselenides in the Suzuki, Negishi, Sonogashira and Kumada cross-coupling reactions

A powerful tool for constructing new carbon–carbon bonds via palladium-catalyzed cross-coupling reactions of unsaturated organoselenides is described.