Copper-mediated cyanation reactions

Hydrogen Bond Donor-Catalyzed One-Pot Transformations of 2,2-Disubstituted Epoxides: Synthesis of Functionalized Nitrile-Rich Derivatives

A practically intriguing catalytic domino methodology has been developed for the synthesis of highly functionalized pyran and ethene-1,1,2-tricarbonitrile derivatives in a single-pot operation. The gem-dicyano olefins and the corresponding epoxide were taken as the reactive partners in the presence of a hydrogen bond donor (HBD)-catalyzed condition. The reaction was found to be highly efficient in terms of the formation of sequential C-C and O-C bonds along with an exceptional CSp2-CSp coupling step through a metal-free organocatalytic pathway. This strategy has been further utilized on ester-substituted epoxides, although the results differ from those with gem-dicyano epoxides. The process remains versatile and effective across a wide range of substrates. This catalytic protocol has been proven to be very generalized with varieties of substrate scope. A low catalyst loading, ambient reaction conditions, and satisfactory yields of all of the products are the vital features of this approach. Moreover, the overall atom-economic outcome along with the synergistic reactivity pattern between the activated epoxide and the malononitrile derivatives is also very significant to address the originality of this process. Spectroscopic analysis is utilized to validate the mechanistic interpretation.

Oxidative Radical Transnitrilation of Arylboronic Acids with Trityl Isocyanide

We report a radical transnitrilation of arylboronic acids with trityl isocyanide in the presence of manganese(III) acetate. Many functional groups can be tolerated in this transformation, and a special positive effect of benzoic acid in this reaction has been observed.

Regiodivergent Cu-Promoted, AcOH-Switchable Distal Versus Proximal Direct Cyanation of 1-Aryl-1H-indazoles and 2-Aryl-2H-indazoles via Aerobic Oxidative C-H Bond Activation

A copper-promoted regiodivergent, AcOH-switchable, distal and proximal direct cyanation of N-aryl-(1H/2H)-indazoles via aerobic oxidative C(sp²)-H bond activation has been developed. The inclusion or exclusion of AcOH as an additive is the foremost cause for the positional switch in the C-CN bond formation method that results in (C-2')-cyanated 2-aryl-2H-indazoles 3a-j, (C-2')-cyanated 1-aryl-1H-indazoles 4a-j [distal], or C-3 cyanated 2-aryl-2H-indazoles 5a-i [proximal] products in good to excellent yields and showed various functional group tolerance. The cyanide (CN^-) ion surrogate was generated via the unification of dimethylformamide and ammonium iodide (NH₄I). The utilization of molecular oxygen (aerobic oxidative strategy) as a clean and safe oxidant is liable for generous value addition. The further pertinence of the developed protocol has been demonstrated by transforming the synthesized cyanated product into numerous other functional groups, which will, undoubtedly, accomplish utilization in the synthetic area of biologically important compounds and medicinal chemistry.

Bioinspired Iron-Catalyzed Dehydration of Aldoximes to Nitriles: A General N-O Redox-Cleavage Method

Inspired by OxdA that operates biocatalytic aldoxime dehydration, we have developed an efficient iron catalyst, Cp*Fe(1,2-Cy₂PC₆H₄O) (1), which rapidly converts various aliphatic and aromatic aldoximes to nitriles with release of H₂O at room temperature. The catalysis involves redox activation of the N-O bond by a 1e^- transfer from the iron catalyst to the oxime. Such redox-mediated N-O cleavage was demonstrated by the isolation of a ferrous iminato intermediate from the reaction of the ketoxime substrate. This iron-catalyzed acceptorless dehydration approach represents a general method for the preparation of nitriles, and it also delivers salicylonitriles by catalyzing the Kemp elimination reaction.

Copper-Mediated Radiocyanation of Unprotected Amino Acids and Peptides

This report describes a copper-mediated radiocyanation of aryl halides that is applicable to complex molecules. This transformation tolerates an exceptionally wide range of functional groups, including unprotected amino acids. As such, it enables the site-specific introduction of [¹¹C]CN into peptides at an iodophenylalanine residue. The use of a diamine-ligated copper(I) mediator is crucial for achieving high radiochemical yield under relatively mild conditions, thus limiting racemization and competing side reactions of other amino acid side chains. The reaction has been scaled and automated to deliver radiolabeled peptides, including analogues of adrenocorticotropic hormone 1-27 (ACTH) and nociceptin (NOP). For instance, this Cu-mediated radiocyanation was leveraged to prepare >40 mCi of [¹¹C]cyano-NOP to evaluate biodistribution in a primate using positron emission tomography. This investigation provides preliminary evidence that nociceptin crosses the blood-brain barrier and shows uptake across all brain regions (SUV > 1 at 60 min post injection), consistent with the known distribution of NOP receptors in the rhesus brain.

Photochemically Enabled, Ni-Catalyzed Cyanation of Aryl Halides

A light-promoted Ni-catalyzed cyanation of aryl halides employing 1,4-dicyanobenzene as a cyanating agent is reported. A broad array of aryl bromides, chlorides, and druglike molecules could be converted into their corresponding nitriles (65 examples). Mechanistic studies suggest that upon irradiation, the oxidative addition product Ni(II)(dtbbpy)(p-C₆H₄CN)(CN) undergoes homolytic cleavage of the Ni-aryl bond to generate an aryl radical and a Ni(I)-CN species, the latter of which initiates subsequent cyanation reactions.

Momentary Clicking Nitrile Synthesis Enabled by an Aminoazanium Reagent

Achieving fast and selective functional group interconversion is crucial for improving synthetic efficiency in nowadays chemical science. In this context, we report a momentary and selective Schmidt-type nitrile synthesis. The...

Understanding Cu(II)-based systems for C(sp3)-H bond functionalization: insights into the synthesis of aza-heterocycles

Herein we report the synthesis of imidazo[1,5-a]pyridine heterocycles via a Cu(II)-mediated functionalization of α'-C(sp³)-H bonds of pyridinylaldimines and subsequent cyclization. This strategy exploits the inherent directing ability of heteroleptic aldimine and pyridine groups in the substrate yielding the C-H functionalization of α'-methylene groups in a regioselective fashion over distant methyl or methylene groups in β or γ positions. The observed correlation between the nature of the anionic ligands (halide vs. carboxylate) bonded to copper and the chemoselectivity of the C(sp³)-H activation process points to a concerted metalation-deprotonation pathway prior to cyclization to furnish the corresponding imidazo[1,5-a]pyridine derivative. This copper-mediated C(sp³)-H bond functionalization reaction works for a variety of substrates incorporating linear alkyl chains (from 3 to 12 carbon atoms), and good functional group tolerance (aryl, ether and ester groups). Cu-Catalyzed C(sp²)-H cyanation on the imidazole ring can then take place selectively under oxidative conditions.

Lewis acid-promoted site-selective cyanation of phenols

An efficient Lewis acid-promoted site-selective electrophilic cyanation of 3-substituted and 3,4-disubstituted phenols has been developed. The cyanation reactions using MeSCN as the cyanating reagent proceeded efficiently to afford a wide range of 2-hydroxybenzonitriles with high efficiency and excellent regioselectivity. This protocol could provide a practical method for the synthesis and modification of biologically active molecules.

Revisiting the synthesis of aryl nitriles: a pivotal role of CAN

Facilitated by the dual role of Ceric Ammonium Nitrate (CAN), herein we report a cost-effective approach for the cyanation of aryl iodides/bromides with CAN-DMF as an addition to the existing pool of combined cyanation sources. In addition to being an oxidant, CAN acts as a source of nitrogen in our protocol. The reaction is catalyzed by a readily available Cu(ii) salt and the ability of CAN to generate ammonia in the reaction medium is utilized to eliminate the additional requirement of a nitrogen source, ligand, additive or toxic reagents. The mechanistic study suggests an evolution of CN- leading to the synthesis of a variety of aryl nitriles in moderate to good yields. The proposed mechanism is supported by a series of control reactions and labeling experiments.

Design, synthesis, and evaluation of cytotoxic activities of arylnaphthalene lignans and aza-analogs

A concise and versatile synthetic strategy for the total synthesis of arylnaphthalene lignans and aza-analogs was developed. The main objective was to develop synthetic tactics for the creation of the lactone and lactam unit that would give access to an array of synthetic, natural, and/or bioactive compounds through rather simple chemical manipulation. The flexibility and potentiality of these new processes were further illustrated by the total synthesis of retrojusticidin B (13b), justicidin C (14b), and methoxy-vitedoamine A (22a). In this study, a series of novel aryl-naphthalene lignans and aza-analogs were synthesized, and the cytotoxic activities of all compounds on cancer cell growth were evaluated. The target compounds were structurally characterized by ¹ H NMR (nuclear magnetic resonance), ¹³ C NMR, infrared, high-resolution mass spectrometry, and X-ray crystallography. The IC₅₀ values of these compounds on five tumor cell lines (A549, HS683, MCF-7, SK-MEL-28, and B16-F1) were obtained by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) colorimetric assay. Five of the compounds exhibited excellent activity compared to 5-fluorouracil and etoposide against the five cell lines tested, with IC₅₀ values ranging from 1 to 10 μM.

Synthesis of Nitrile Bearing Acyclic Quaternary Centers through Co(III)-Catalyzed Sequential C-H Bond Addition to Dienes and N-Cyanosuccinimide

Herein we disclose a three-component strategy to access quaternary centers bearing nitriles by cobalt-catalyzed C-H bond activation and sequential addition to internally substituted 1,3-dienes and an electrophilic cyanating reagent with high regio and stereocontrol. 2-Aryl and alkyl monosubstituted dienes provide α-aryl and α-alkyl α-methyl-substituted nitriles, respectively. An even wider variety of functionality can be installed at the quaternary carbon by using 1,2-disubstituted dienes. The synthetic utility of the nitrile products was successfully demonstrated by various transformations, including conversions to γ-lactones and tetrazoles. The observed connectivity in the products along with studies with deuterium labeled reactants provide insight into the mechanism. Formation of a 7-membered cobaltacycle by C-H activation and migratory insertion of the diene is followed by β-hydride elimination and hydride reinsertion to give a 6-membered cobaltacycle that then reacts with the cyanating agent.

A Serendipitous One-Pot Cyanation/Hydrolysis/Enamide Formation: Direct Access to 3-Methyleneisoindolin-1-ones

A direct, one-pot conversion of 2'-haloacetophenones to 3-methyleneisoindolin-1-one scaffolds using CuCN as the sole reagent without the need for moisture-free or anaerobic conditions is reported. This serendipitously discovered transformation with a broad substrate scope provides a significantly different route towards these important scaffolds. The scope of the method has also been further extended towards the synthesis of three special scaffolds, which are analogous to various bio-active drugs.

Cyanation: a photochemical approach and applications in organic synthesis

This review summarises the photocatalytic cyanation strategies to construct C(sp²)–CN, C(sp³)–CN and X–CN (X = N, S) bonds.

Directing group strategies in catalytic sp2 C–H cyanations: scope, mechanism and limitations

Directing group strategy in transition metal catalyzed sp² C–H bond cyanation has contributed to the direct conversion of hydrocarbons to cyano-containing compounds. Recent developments in transition metal-mediated sp² C–H bond cyanation using this strategy are reviewed.

Conversions of aryl carboxylic acids into aryl nitriles using multiple types of Cu-mediated decarboxylative cyanation under aerobic conditions

Here, we used malononitrile or AMBN as a cyanating agent to develop efficient and practical protocols for Cu-mediated decarboxylative cyanations, under aerobic conditions, of aryl carboxylic acids bearing nitro and methoxyl substituents at the ortho position as well as of heteroaromatic carboxylic acids. These protocols involved economical methods to synthesize value-added aryl nitriles from simple and inexpensive raw materials. Further diversification of the 2-nitrobenzonitrile product was performed to highlight the practicality of the protocols.

Rh(III)-Catalyzed C-H Cyanation of 2H-Indazole with N-Cyano-N-phenyl-p-toluenesulfonamide

A Rh(III)-catalyzed direct cyanation of 2H-indazoles with N-cyano-N-phenyl-p-toluenesulfonamide has been realized via a chelation-assisted strategy. The methodology enables regioselective access to various ortho-cyanated phenylindazoles in good yields with a broad substrate scope and good functional group compatibility. The obtained cyanated indazoles could further be converted into other value-added chemicals. Importantly, the current protocol is featured with several characteristics, including a novel cyanating agent, good regioselectivity, and operational convenience.

Para-Selective Cyanation of Arenes by H-Bonded Template

The significance of site selective functionalization stands upon the superior selectivity, easy synthesis and diverse product utility. In this work, we demonstrate the para-selective introduction of versatile nitrile moiety, enabled by a detachable and reusable H-bonded auxiliary. The methodology holds its efficiency irrespective of substrate electronic bias. The conspicuous shift in the step energetics was probed by both experimental and computational mechanistic tools, which heralds the inception of para-deuteration. The synthetic impact of the methodology was highlighted with reusability of directing group and post synthetic modifications.

Copper-Catalyzed Tertiary Alkylative Cyanation for the Synthesis of Cyanated Peptide Building Blocks

In this paper, we report efficient cyanation of various peptides containing the α-bromocarbonyl moiety using a Cu-catalyzed radical-based methodology employing zinc cyanide as the cyanide source. Mechanistic studies revealed that in situ formed CuCN was a key intermediate during the catalytic cycle. Our method could be useful for the synthesis of modified peptides containing quaternary carbons.

Recent advances in C–CN and C–H bond activation of green nitrile (MeCN) for organo-complexation, cyanation and cyanomethylation

The use of green and inexpensive organic nitrile (MeCN) as a cyano and cyano-methyl source for organo-complexation, cyanation, and cyanomethylation is reviewed.

An aerobic and green C-H cyanation of terminal alkynes

This study describes a benign C-H cyanation of terminal alkynes with α-cyanoesters serving as a nontoxic cyanide source. In situ generation of the key copper cyanide intermediate is proposed by a sequence of α-C-H oxidation and copper-mediated β-carbon elimination of α-cyanoesters, releasing the α-ketoester byproduct observed experimentally. The ensuing reaction of copper cyanide with terminal alkynes delivers preferentially cyanoalkynes and surpasses the possible Glaser type dimerization of terminal alkynes or the undesired accumulation of HCN under protic conditions. The presence of the co-oxidant K2S2O8 is crucial to this selectivity, probably by promoting oxidative transmetalation and the resulting formation of the Cu(iii)(acetylide)(CN) intermediate. All the reagents and salts used are commercially available, cheap and nontoxic, avoiding the use of highly toxic cyanide salts typically required in cyanation studies. The scope of this reaction is demonstrated with a set of alkynes and α-cyanoesters. The application of this method to late-stage functionalization of the terminal alkyne group in an estrone derivative is also feasible, showing its practical value for drug design.

A convenient reagent for the conversion of aldoximes into nitriles and isonitriles

Described herein is the convenient transformation of aldoximes into nitriles or isonitriles by slightly modifying reaction conditions.

Palladium-catalyzed cyanation of aryl halides with in situ generated CN− from ClCF2H and NaNH2

An efficient Pd-catalyzed cyanation of aryl halides with in situ generated CN⁻ anions is described.

Metal-free dehydrosulfurization of thioamides to nitriles under visible light

A visible light-mediated dehydrosulfurization of thioamides to nitriles is demonstrated, using an organic dye as a photocatalyst and air as an oxidant.

Self-assembly of supramolecular structure based on copper-lipopeptides isolated from e-waste bioleaching liquor

Supramolecular structures were produced by auto-assembling CuCN blocks derived from copper-lipopeptides (CuLps) isolated from bioleaching liquor. Lipopeptides produced by B. subtilis Hyhel1 have been previously related as responsible by bioleaching and intracellular copper crystal production. However, there were no records relating CuLps to extracellular copper crystal production. To study this process, CuLps were isolated from bioleaching liquor and kept at 8 °C to facilitate the CuLps aggregation. After three months, blue spheres (BS) were observed in the CuLp fraction. These spheres were then analyzed by SEM-EDS, MALDI-TOF-MS/MS, GC-MS and FTIR. SEM-EDS analysis showed that they were formed by polycrystalline structures mainly composed by Cu (46.5% m/m) and positioned concentrically. MALDI-TOF-MS/MS and GCMS showed that peptide bonds of CuLp were broken, producing lipid chains and amino acids free. The FTIR of BS showed three nitro groups: CN, NN and NO, which were not found in the control. These data suggest that the CuLp amino acid produced a CN group linked to copper, as CuCN blocks, that auto-assembled in supramolecular structures. This phenomenon could be explored as a method to recover copper and to obtain supramolecular CuCN structures, which in turn may be used as template for superconductor or computing devices.

Pd Nanocatalyst Adorning Coral Reef Nanocomposite for the Synthesis of Nitriles: Utility of Cucurbita pepo Leaf Extract as a Stabilizing and Reducing Agent

A simple procedure for the palladium-catalyzed cyanation of aryl halides is described via a nucleophilic non-toxic cyanide source, K₄[Fe(CN)₆] in the presence of Pd/coral reef nanocomposite as a heterogeneous catalyst; the protocol provides a useful and easy method for the synthesis of aryl nitriles that are generated from the corresponding variant aryl halides, with sodium carbonate as a base. The nanocatalyst was prepared by a biological process using aqueous extract of leaves of Cucurbita pepo as a stabilizing and reducing agent and coral reef as a natural support, without deploying any hazardous chemicals. The catalyst, that is easily separable from the reaction mixture and reused multiple times, was characterized by FT-IR (Fourier-Transform Infrared Spectroscopy), ICP-AES (Inductively Coupled Plasma Atomic Emission Spectroscopy), XRD (X-ray Diffraction), TEM (Transmission Electron Microscopy), FE-SEM (Field Emission Scanning Electron Microscopy), EDS (Energy Dispersive X-ray Spectroscopy) and elemental mapping.

Non-toxic cyanide sources and cyanating agents

The present review gives an overview over non-toxic cyanation agents and cyanide sources used in the synthesis of structurally diverse products containing the nitrile function. Nucleophilic as well as electrophilic agents/systems that transfer the entire CN-group were taken in consideration. Reactions in which a preexisting carbon functionality is transformed into a nitrile function by addition of nitrogen are however not covered here.

Stepwise dissolution and composition determination of samples of multiple crystals using a dissolution medium containing aqueous alcohol and fluorocarbon phases

A biphasic medium gave controlled partial dissolution of crystals in multi-particle samples allowing the distribution of impurities to be determined.

Theoretical studies on Rh(iii)-catalyzed regioselective C-H bond cyanation of indole and indoline

Density functional theory calculations were carried out to study the reaction mechanism of the Rh(iii)-catalyzed regioselective C-H cyanation of indole and indoline with N-cyano-N-phenyl-para-methylbenzenesulfonamide (NCTS). This mechanism involves four major steps: C-H activation, cyano group insertion, β-N elimination, and regeneration of active species. How different indole and indoline substrates affect the regioselectivity of C-H bond cyanation has been examined and analyzed in detail. Our calculation results indicate that the regioselectivity of C-H bond cyanation of indole depends on the nucleophilicity of carbon atoms in C-Rh(iii) bonds to the cyano group. For indoline, it can be attributed to the different hybridization platforms of the C-H bond activation.

Nickel-catalyzed cyanation of aryl halides and triflates using acetonitrile via C-CN bond cleavage assisted by 1,4-bis(trimethylsilyl)-2,3,5,6-tetramethyl-1,4-dihydropyrazine

A catalyst system of [Ni(MeCN)₆](BF₄)₂, 1,10-phenanthroline, and 1,4-bis(trimethylsilyl)-2,3,5,6-tetramethyl-1,4-dihydropyrazine (Si–Me₄-DHP) assisted cyanation of aryl halides in acetonitrile to give the corresponding aryl nitriles.

We developed a non-toxic cyanation reaction of various aryl halides and triflates in acetonitrile using a catalyst system of [Ni(MeCN)₆](BF₄)₂, 1,10-phenanthroline, and 1,4-bis(trimethylsilyl)-2,3,5,6-tetramethyl-1,4-dihydropyrazine (Si–Me₄-DHP). Si–Me₄-DHP was found to function as a reductant for generating nickel(0) species and a silylation reagent to achieve the catalytic cyanation via C–CN bond cleavage.