Engineering amyloidogenicity towards the development of nanofibrillar materials

Mica Lattice Orientation of Epitaxially Grown Amyloid β25-35 Fibrils

β-amyloid (Aβ) peptides form self-organizing fibrils in Alzheimer's disease. The biologically active, toxic Aβ25-35 fragment of the full-length Aβ-peptide forms a stable, oriented filament network on the mica surface with an epitaxial mechanism at the timescale of seconds. While many of the structural and dynamic features of the oriented Aβ25-35 fibrils have been investigated before, the β-strand arrangement of the fibrils and their exact orientation with respect to the mica lattice remained unknown. By using high-resolution atomic force microscopy, here, we show that the Aβ25-35 fibrils are oriented along the long diagonal of the oxygen hexagon of mica. To test the structure and stability of the oriented fibrils further, we carried out molecular dynamics simulations on model β-sheets. The models included the mica surface and a single fibril motif built from β-strands. We show that a sheet with parallel β-strands binds to the mica surface with its positively charged groups, but the C-terminals of the strands orient upward. In contrast, the model with antiparallel strands preserves its parallel orientation with the surface in the molecular dynamics simulation, suggesting that this model describes the first β-sheet layer of the mica-bound Aβ25-35 fibrils well. These results pave the way toward nanotechnological construction and applications for the designed amyloid peptides.

Controlled Exposure of Bioactive Growth Factor in 3D Amyloid Hydrogel for Stem Cells Differentiation

Amyloid based hydrogels can mimic the extracellular matrix and serve as matrices for tissue engineering both in vitro and in vivo. A pH responsive self-assembled amyloid hydrogel system is used to encapsulate various growth factors for driving stem cell differentiation toward neuronal lineage. Diffusion studies with fluorescence recovery after photobleaching and bulk release with the model protein fluorescein isothiocyanate-bovine serum albumin show that encapsulated protein molecules can be released in a sustained fashion from the hydrogel over a considerable period of time (30 d). Moreover, by modulating the porosity of the hydrogel by the simple addition of salt, the encapsulated protein molecules can be retained for a longer period of time within the hydrogel. Mesenchymal stem cells, when cultured in 3D amyloid hydrogels with growth factors fibroblast growth factor 8 and sonic hedgehog, show more neuron specific differentiation as compared to hydrogel alone. This higher differentiation potential of growth factor encapsulated amyloid hydrogels can be due to concomitant exposure of cells to biomechanical as well as biochemical cues during the course of differentiation. The present study suggests that amyloid based hydrogel can be exploited for controlled growth factor delivery as well as directed stem cell differentiation to neuron.

Structural and Mechanical Properties of Amyloid Beta Fibrils: A Combined Experimental and Theoretical Approach

In this combined experimental (deep ultraviolet resonance Raman (DUVRR) spectroscopy and atomic force microscopy (AFM)) and theoretical (molecular dynamics (MD) simulations and stress-strain (SS)) study, the structural and mechanical properties of amyloid beta (Aβ40) fibrils have been investigated. The DUVRR spectroscopy and AFM experiments confirmed the formation of linear, unbranched and β-sheet rich fibrils. The fibrils (Aβ40)n, formed using n monomers, were equilibrated using all-atom MD simulations. The structural properties such as β-sheet character, twist, interstrand distance, and periodicity of these fibrils were found to be in agreement with experimental measurements. Furthermore, Young's modulus (Y) = 4.2 GPa computed using SS calculations was supported by measured values of 1.79 ± 0.41 and 3.2 ± 0.8 GPa provided by two separate AFM experiments. These results revealed size dependence of structural and material properties of amyloid fibrils and show the utility of such combined experimental and theoretical studies in the design of precisely engineered biomaterials.

Conversion of amyloid fibrils of cytochrome c to mature nanorods through a honeycomb morphology

Amyloid species with various morphologies have been found for different proteins and disease systems. In this article, we aim to ask if these morphologies are unique to a particular protein or if they convert from one to another. Using a heme protein containing iron as the transition-metal activator of aggregation and a negatively charged surfactant, partial unfolding of the protein and its aggregation have been induced. In the pathway of aggregation, we have observed the formation of several morphological structures of a single protein, which were visualized directly using atomic force microscopy (AFM). These structures have been found to appear and disappear with time, and their formation could be monitored under normal buffer conditions and at room temperature without requiring any sophisticated chemical or biological methodologies. In addition, we have observed the formation of honeycomb-shaped morphology, which may serve as an intermediate. These amyloid-based nanostructures may have the potential to be explored in therapeutics delivery and other biomedical applications.

Formation of platinum-coated templates of insulin nanowires used in reducing 4-nitrophenol

Modern technology demands ever smaller and more efficient nanoparticles, wires and networks. The natural tendency for amyloid proteins to form fibrillar structures is leveraged in creating high aspect ratio, nano-sized protein fibers as scaffolds for metallized nanowires. The morphology of fibrils is influenced by induced strain during denaturing and early aggregation and subsequent fibril deposition with platinum leads to controlled catalyst surfaces based on the initial protein precipitate. Here we have created insulin fibrils with varying morphologies produced in the presence of heat and strain and investigated their metallization with platinum by TEM. The catalytic activity of the metal-coated protein fibrils was resolved by tracking the reaction kinetics of the conversion of 4-nitrophenol to 4-aminophenol in the presence of the produced nanowires using UV-Vis spectroscopy. The effects of fibril morphology and temperature on the pseudo-first-order kinetics of conversion are investigated. Conversion to 4-aminophenol occurs on the order of minutes and is independent of temperature in the range tested (7 to 20°C). Two regimes of conversion are identified, an early higher rate, followed by a slower later rate.

Detection and analysis of protofibrils and fibrils of hemoglobin: implications for the pathogenesis and cure of heme loss related maladies

TFE induces structural alterations of proteins similar to the lipid environment of biological membranes, implicating these studies worthy of analyzing protein conformation in membranes such as red blood cells (RBCs). Heme loss occurs on rupturing of RBCs as found in diseases namely haemophilia, haemolytic anaemia, diabetes mellitus. TFE can be implied in discovering therapeutic targets, as it mimics the biological membrane environment. A global transition of hemoglobin (Hb) in presence of TFE was studied by using multi-methodological approach. The presence of partially folded state of Hb at 15% v/v TFE was confirmed by altered tryptophan environment, and retention of native-like secondary and tertiary structure. Molten globule state was observed at 20% v/v TFE as detected by increase tryptophan and high ANS fluorescence, slight alterations in Soret band relative to native. TFE on increasing concentration induced protofibrils at 25% v/v and fibrils at 45% v/v as depicted by altered tryptophan environment, heme loss, increase in non-native β-sheet secondary and tertiary structure, large hydrodynamic radii of heme-protein, high ANS, thioflavin T fluorescence and shift in Congo Red absorbance. Comet assay showed that protofibrils are cytotoxic to lymphocytes. SEM and XRD confirmed these aggregates to be fibrillar in nature.

Proteins and peptides as biological nanowires: towards biosensing devices

The current landscape of nanotechnology is such that attention is being given to those materials that self-assemble, as a mode of "bottom-up" fabrication of nanomaterials. The field of nanotubes and nanowires has long been dominated by carbon nanotubes and inorganic materials. However in more recent years, the search for materials with desirable properties, such as self-assembly, has unsurprisingly led to the biological world, where functional nanoscale biomolecular assemblies are in abundance.Potential has been seen for a number of these assemblies to be translated into functional nanomaterials. The early days of bionanotechnology saw a lot of attention given to DNA molecules as nanowires, and proteins and peptides have now also been seen to have promise in this area. With most of the biological structures investigated having low conductivity in the native state, the use of biomolecules as templates for the formation of metallic and semiconductor nanowires has been the direction taken.This chapter will discuss the use of various biomolecules and biomolecular assemblies as nanowires, with a particular emphasis on proteins, beginning with an introduction into the field of nanotubes and nanowires. Many applications are now recognized for nanowires, but for brevity, this chapter will focus solely on their use as biosensors, using glucose sensors as a case study.

AMYLOID: A NATURAL NANOMATERIAL

Amyloids are stable, β-sheet-rich protein/peptides aggregates with 2–15 nm diameter and few micrometers long. It is originally associated with many human diseases such as Alzheimer's, Parkinson's and prion diseases. Amyloids are resistant to enzyme degradation, temperature changes and wide ranges of pH. Although, amyloids are hard and their stiffness is comparable to steel, a constant recycling of monomer occur inside the amyloid fibrils. It grows in a nucleation dependent polymerization manner by recruiting native soluble protein and by converting them to amyloid. These extraordinary physical properties make amyloids attractive for nanotechnological applications. Some amyloid fibrils have also evolved to perform native biological functions (functional amyloid) of the host organism. Functional amyloids are present in mammals such as amyloids of pMel17 and pituitary hormones, where they help in skin pigmentation and hormone storage, respectively. Here, the progress of utilizing amyloid fibrils for nanobiotechnological applications with particular emphasis on the recent studies that amyloid could be utilized for the formulation of peptide/protein drugs depot and how secretory cells uses amyloid for hormone storage will be reviewed.

Glycosaminoglycans promote fibril formation by amyloidogenic immunoglobulin light chains through a transient interaction

Amyloid formation occurs when a precursor protein misfolds and aggregates, forming a fibril nucleus that serves as a template for fibril growth. Glycosaminoglycans are highly charged polymers known to associate with tissue amyloid deposits that have been shown to accelerate amyloidogenesis in vitro. We studied two immunoglobulin light chain variable domains from light chain amyloidosis patients with 90% sequence identity, analyzing their fibril formation kinetics and binding properties with different glycosaminoglycan molecules. We find that the less amyloidogenic of the proteins shows a weak dependence on glycosaminoglycan size and charge, while the more amyloidogenic protein responds only minimally to changes in the glycosaminoglycan. These glycosaminoglycan effects on fibril formation do not depend on a stable interaction between the two species but still show characteristic traits of an interaction-dependent mechanism. We propose that transient, predominantly electrostatic interactions between glycosaminoglycans and the precursor proteins mediate the acceleration of fibril formation in vitro.

Characterization of β2-microglobulin conformational intermediates associated to different fibrillation conditions

β2-Microglobulin (β2m) is the light chain of the class-I major histocompatibility complex, being also the causing agent of dialysis-related amyloidosis, which results from its accumulation as amyloid material in the skeletal joints. This study describes conformational properties of β2m under two distinct, in vitro amyloidogenic conditions: neutral pH in the presence of 20% 2,2,2-trifluoroethanol (TFE) and acidic pH in the absence of TFE. Species distribution analysis by electrospray ionization-mass spectrometry (ESI-MS) is combined with information obtained by ion mobility-mass spectrometry (IM-MS), fluorescence and circular dichroism (CD) spectroscopy. It is shown that β2m populates quite different conformational ensembles under the two conditions, but both ensembles display a minor fraction of the population in a partially folded state. In spite of similar compactness, these two partially folded forms display different conformations: helical secondary structure is predominant in the species at pH 7.4, 20% TFE, while the low-pH form is mainly random coil. As temperature is increased, the TFE intermediate looses helical structure becoming more similar to the low-pH intermediate. The existence of different conformational ensembles may rationalize the different aggregation propensity displayed by β2m under the two fibrillation conditions analyzed here.

A structural model for apolipoprotein C-II amyloid fibrils: experimental characterization and molecular dynamics simulations

The self-assembly of specific proteins to form insoluble amyloid fibrils is a characteristic feature of a number of age-related and debilitating diseases. Lipid-free human apolipoprotein C-II (apoC-II) forms characteristic amyloid fibrils and is one of several apolipoproteins that accumulate in amyloid deposits located within atherosclerotic plaques. X-ray diffraction analysis of aligned apoC-II fibrils indicated a simple cross-β-structure composed of two parallel β-sheets. Examination of apoC-II fibrils using transmission electron microscopy, scanning transmission electron microscopy, and atomic force microscopy indicated that the fibrils are flat ribbons composed of one apoC-II molecule per 4.7-Å rise of the cross-β-structure. Cross-linking results using single-cysteine substitution mutants are consistent with a parallel in-register structural model for apoC-II fibrils. Fluorescence resonance energy transfer analysis of apoC-II fibrils labeled with specific fluorophores provided distance constraints for selected donor-acceptor pairs located within the fibrils. These findings were used to develop a simple 'letter-G-like' β-strand-loop-β-strand model for apoC-II fibrils. Fully solvated all-atom molecular dynamics (MD) simulations showed that the model contained a stable cross-β-core with a flexible connecting loop devoid of persistent secondary structure. The time course of the MD simulations revealed that charge clusters in the fibril rearrange to minimize the effects of same-charge interactions inherent in parallel in-register models. Our structural model for apoC-II fibrils suggests that apoC-II monomers fold and self-assemble to form a stable cross-β-scaffold containing relatively unstructured connecting loops.

Development of peptide and protein nanotherapeutics by nanoencapsulation and nanobioconjugation

The targeted delivery of therapeutic peptide by nanocarriers systems requires the knowledge of interactions of nanomaterials with the biological environment, peptide release, and stability of therapeutic peptides. Therapeutic application of nanoencapsulated peptides are increasing exponentially and >1000 peptides in nanoencapsulated form are in different clinical/trial phase. This review covers current scenario of therapeutic protein and peptides encapsulation on polymer to metallic nanocarriers including methods of protein encapsulation, peptide bioconjugation on nanoparticles, stability enhancement of encapsulated proteins and its biomedical applications.

Natural biopolymers: novel templates for the synthesis of nanostructures

Biological systems such as proteins, viruses, and DNA have been most often reported to be used as templates for the synthesis of functional nanomaterials, but the properties of widely available biopolymers, such as cellulose, have been much less exploited for this purpose. Here, we report for the first time that cellulose nanocrystals (CNC) have the capacity to assist in the synthesis of metallic nanoparticle chains. A cationic surfactant, cetyltrimethylammonium bromide (CTAB), was critical to nanoparticle stabilization and CNC surface modification. Silver, gold, copper, and platinum nanoparticles were synthesized on CNCs, and the nanoparticle density and particle size were controlled by varying the concentration of CTAB, the pH of the salt solution, and the reduction time.

Alzheimer's abeta(1-40) amyloid fibrils feature size-dependent mechanical properties

Amyloid fibrils are highly ordered protein aggregates that are associated with several pathological processes, including prion propagation and Alzheimer's disease. A key issue in amyloid science is the need to understand the mechanical properties of amyloid fibrils and fibers to quantify biomechanical interactions with surrounding tissues, and to identify mechanobiological mechanisms associated with changes of material properties as amyloid fibrils grow from nanoscale to microscale structures. Here we report a series of computational studies in which atomistic simulation, elastic network modeling, and finite element simulation are utilized to elucidate the mechanical properties of Alzheimer's Abeta(1-40) amyloid fibrils as a function of the length of the protein filament for both twofold and threefold symmetric amyloid fibrils. We calculate the elastic constants associated with torsional, bending, and tensile deformation as a function of the size of the amyloid fibril, covering fibril lengths ranging from nanometers to micrometers. The resulting Young's moduli are found to be consistent with available experimental measurements obtained from long amyloid fibrils, and predicted to be in the range of 20-31 GPa. Our results show that Abeta(1-40) amyloid fibrils feature a remarkable structural stability and mechanical rigidity for fibrils longer than approximately 100 nm. However, local instabilities that emerge at the ends of short fibrils (on the order of tens of nanometers) reduce their stability and contribute to their disassociation under extreme mechanical or chemical conditions, suggesting that longer amyloid fibrils are more stable. Moreover, we find that amyloids with lengths shorter than the periodicity of their helical pitch, typically between 90 and 130 nm, feature significant size effects of their bending stiffness due the anisotropy in the fibril's cross section. At even smaller lengths (50 nm), shear effects dominate lateral deformation of amyloid fibrils, suggesting that simple Euler-Bernoulli beam models fail to describe the mechanics of amyloid fibrils appropriately. Our studies reveal the importance of size effects in elucidating the mechanical properties of amyloid fibrils. This issue is of great importance for comparing experimental and simulation results, and gaining a general understanding of the biological mechanisms underlying the growth of ectopic amyloid materials.

The second Cu(II)-binding site in a proton-rich environment interferes with the aggregation of amyloid-beta(1-40) into amyloid fibrils

The overall morphology and Cu(II) ion coordination for the aggregated amyloid-beta(1-40) [Abeta(1-40)] in N-ethylmorpholine (NEM) buffer are affected by Cu(II) ion concentration. This effect is investigated by transmission electron microscopy (TEM), atomic force microscopy (AFM), and electron spin echo envelope modulation (ESEEM) spectroscopy. At lower than equimolar concentrations of Cu(II) ions, fibrillar aggregates of Abeta(1-40) are observed. At these concentrations of Cu(II), the monomeric and fibrillar Abeta(1-40) ESEEM data indicate that the Cu(II) ion is coordinated by histidine residues. For aggregated Abeta(1-40) at a Cu(II):Abeta molar ratio of 2:1, TEM and AFM images show both linear fibrils and granular amorphous aggregates. The ESEEM spectra show that the multi-histidine coordination for Cu(II) ion partially breaks up and becomes exposed to water or exchangeable protons of the peptide at a higher Cu(II) concentration. Since the continuous-wave electron spin resonance results also suggest two copper-binding sites in Abeta(1-40), the proton ESEEM peak may arise from the second copper-binding site, which may be significantly involved in the formation of granular amorphous aggregates. Thioflavin T fluorescence and circular dichroism experiments also show that Cu(II) inhibits the formation of fibrils and induces a nonfibrillar beta-sheet conformation. Therefore, we propose that Abeta(1-40) has a second copper-binding site in a proton-rich environment and the second binding Cu(II) ion interferes with a conformational transition into amyloid fibrils, inducing the formation of granular amorphous aggregates.

Lipid-modulated pharmacophore nanorods assembled at the air/water interface

Biomimetic pharmacophores deposited at the air/water interface self-assemble into distinct crystalline nanostructures. The shapes and dimensions of the nanostructures are significantly modulated by the lipid environments in mixed lipid/DAG-lactone monolayers.

Structurally distinct amyloid protofibrils form on separate pathways of aggregation of a small protein

Understanding the structural as well as mechanistic basis of the conformational polymorphism evident during amyloid protofibril and fibril formation by proteins is an important goal in the study of protein aggregation. In this report, we compare two separate routes to amyloid protofibril formation by the small protein barstar, one induced by the addition of trifluoroethanol (TFE) and the other by heat. The study reveals that the TFE-induced aggregation of barstar leads to protofibrils that differ from heat-induced protofibrils in their external dimensions and internal structures as well as in the mechanisms of their formation. Atomic force microscopy reveals that the TFE-induced protofibrils have about half the thickness of the heat-induced protofibrils. The thickness of the TFE-induced protofibrils (1.14 +/- 0.24) suggests that they form a beta-sheet monolayer, while the thickness of the heat-induced protofibrils (2.56 +/- 0.32) suggests that they are built up from a pair (bilayer) of beta-sheets. Fourier-transform infrared (FTIR) as well as circular dichroism (CD) spectroscopy shows that the heat-induced protofibrils are not pure beta-sheet structures but that they also contain other structures (alpha-helix and/or random coil). In contrast, the TFE-induced protofibrils contain more beta-sheet structures and less of other structures, if any. The FTIR and CD spectra also reveal that the two differently created protofibrils differ in the internal structures of their beta-sheets. The TFE-induced protofibrils differ from the heat-induced protofibrils also in the kinetics of their formation. For the heat-induced reaction, the kinetics are monophasic without any lag phase, while the kinetics of the formation of TFE-induced protofibrils are sigmoidal with an initial lag phase. It appears that the TFE-induced and the heat-induced reactions involve distinct pathways for the formation of amyloid protofibrils. The existence of alternative pathways leading to amyloid protofibrils of distinct structures has important implications in understanding the kinetic origin of amyloid polymorphism.

Amyloidogenic potential of alpha-chymotrypsin in different conformational states

Amyloid fibril formation is widely believed to be a generic property of polypeptide chains. In the present study, alpha-chymotrypsin, a well-known serine protease has been driven toward these structures by the use of two different conditions involving (I) high temperature, pH 2.5, and (II) low concentration of trifluoroethanol (TFE), pH 2.5. A variety of experimental methods, including fluorescence emission, dynamic quenching, steady-state fluorescence anisotropy, far-UV circular dichroism, nuclear magnetic resonance spectroscopy, and dynamic light scattering were employed to characterize the conformational states of alpha-chymotrypsin that precede formation of amyloid fibrils. The structure formed under Condition I was an unfolded monomer, whereas an alpha-helical rich oligomer was induced in Condition II. Both the amyloid aggregation-prone species manifested a higher solvent exposure of hydrophobic and aromatic residues compared with the native state. Upon incubation of the protein in these conditions for 48 h, amyloid-like fibrils were formed with diameters of about 10-12 nm. In contrast, at neutral pH and low concentration of TFE, a significant degree of amorphous aggregation was observed, suggesting that charge neutralization of acidic residues in the amyloid core region has a positive influence on amyloid fibril formation. In summary, results presented in this communication suggest that amyloid fibrils of alpha-chymotrypsin may be obtained from a variety of structurally distinct conformational ensembles highlighting the critical importance of protein evolution mechanisms related to prevention of protein misfolding.

Fibrils with parallel in-register structure constitute a major class of amyloid fibrils: molecular insights from electron paramagnetic resonance spectroscopy

The deposition of amyloid- and amyloid-like fibrils is the main pathological hallmark of numerous protein misfolding diseases including Alzheimer's disease, transmissible spongiform encephalopathy, and type 2 diabetes. Besides the well-established role in disease, recent work on a variety of organisms ranging from bacteria to humans suggests that amyloid fibrils can also convey biological functions. To better understand the molecular mechanisms by which amyloidogenic proteins misfold in disease or perform biological functions, structural information is essential. Although high-resolution structural analysis of amyloid fibrils has been challenging, a combination of biophysical approaches is beginning to unravel the various structural features of amyloid fibrils. Here we review these recent developments with particular emphasis on amyloid fibrils that have been studied using site-directed spin labeling and electron paramagnetic resonance spectroscopy. This approach has been used to define the precise location of fibril-forming core regions and identify local secondary structures within such core regions. Perhaps one of the most remarkable findings arrived at by site-directed spin labeling was that most fibrils that contain an extensive core region of 20 amino acids or more share a common parallel in-register arrangement of beta strands. The preference for this arrangement can be explained on topological grounds and may be rationalized by the maximization of hydrophobic contact surface.

Enzymatically active fibrils generated by the self-assembly of the ApoA-I fibrillogenic domain functionalized with a catalytic moiety

Enzymatically active fibrils were produced by self-assembly of a bifunctional chimeric protein, made up of a fibrillogenic and a catalytic moiety. For this purpose, the fibrillogenic domain of Apolipoprotein A-I (ApoA-I), a 93-residue polypeptide named [1-93]ApoA-I, was functionalized with the enzyme glutathione S-transferase (GST). The fusion protein GST-[1-93]ApoA-I was expressed, isolated to homogeneity and characterized. In the soluble form, GST-[1-93]ApoA-I was found to be fully active as a GST enzyme, and to have high propensity to self-aggregate. Upon incubation for 3 weeks at pH 6.4, insoluble aggregates were generated. Analyzed by AFM, they were found to contain fibrillar structures often organized into large fiber networks. Fibrils were loaded on the membrane of a microfiltration unit and tested for enzymatic activity by filtering the substrate through the fibrillar network. Fibrils were shown to be catalytically active, stable over time and reusable, as no loss of activity was detected when fibrils were repeatedly tested. Our findings suggest that catalytically active fibrils may be of interest for biocatalytic applications in nanobiotechnology.

Modulation of self-association and subsequent fibril formation in an alanine-rich helical polypeptide

Thermal unfolding, reversible self-association, and irreversible aggregation were investigated for an alanine-rich helical polypeptide, 17-H-6, with sequence [AAAQEAAAAQAAAQAEAAQAAQ] 6. Dynamic light scattering, transmission electron microscopy, and thermal unfolding measurements indicate that 17-H-6 spontaneously and reversibly self-associates at acidic pH and low temperature. The resulting multimers have a compact, globular morphology with an average hydrodynamic radius approximately 10-20 nm and reversibly dissociate to monomers upon an increase to pH 7.4. Both free monomer and 17-H-6 chains within the multimers are alpha-helical and folded at low temperature. Reversible unfolding of the monomer occurs upon heating of solutions at pH 7.4. At pH 2.3, heating first causes incomplete dissociation and unfolding of the constituent chains. Further incubation at elevated temperature induces additional structural and morphological changes and results in fibrils with a beta-sheet 2 degrees structure and a characteristic diameter of 5-10 nm (7 nm mean). The ability to modulate association and aggregation suggests opportunities for this class of polypeptides in nanotechnology and biomedical applications.

The degree of structural protection at the edge beta-strands determines the pathway of amyloid formation in globular proteins

The assembly of proteins into highly organized fibrillar aggregates is a key process in biology, biotechnology, and human disease. It has been shown that proteins retain a small, yet significant propensity to aggregate when they are folded into compact globular structures, and this may be physiologically relevant, particularly when considering that proteins spend most of their lifespan into such compact states. Proteins from the acylphosphatase-like structural family have been shown to aggregate via different mechanisms, with some members forming native-like aggregates as a first step of their aggregation process and others requiring unfolding as a first necessary step. Here we use the acylphosphatase from Sulfolobus solfataricus to show that assembly of folded protein molecules into native-like aggregates is prevented by single-point mutations that introduce structural protections within one of the most flexible region of the protein, the peripheral edge beta-strand 4. The resulting mutants do not form native-like aggregates, but can still form thioflavin T-binding and beta-structured oligomers, albeit more slowly than the wild-type protein. The kinetic data show that formation of the latter species proceeds via an alternative mechanism that is independent of the transient formation of native-like aggregates.

Oriented epitaxial growth of amyloid fibrils of the N27C mutant beta 25-35 peptide

Amyloid fibrils are present in the extracellular space of various tissues in neurodegenerative and protein misfolding diseases. Amyloid fibrils may be used in nanotechnology applications, because of their self-assembly properties and stability, if their growth and orientation can be controlled. Recently, we have shown that amyloid beta 25-35 (A beta 25-35) forms a highly oriented, K(+)-dependent network on mica. Here, we analyzed the properties of A beta 25-35_N27C, the cysteine residue of which may be used for subsequent chemical modifications. We find that A beta 25-35_N27C forms epitaxially growing fibrils on mica, which evolve into a trigonally oriented branched network. The binding is apparently more sensitive to cation concentration than that of the wild-type peptide. By nanomanipulating A beta 25-35_N27C fibrils with a gold-coated AFM tip, we show that the sulfhydryl of Cys27 is reactive and accessible from the solution. The oriented network of A beta 25-35_N27C fibrils can therefore be specifically labeled and may be used for constructing nanobiotechnological devices.

Prevention of amyloid-like aggregation as a driving force of protein evolution

Uncontrolled protein aggregation is a constant challenge in all compartments of living organisms. The failure of a peptide or protein to remain soluble often results in pathology. So far, more than 40 human diseases have been associated with the formation of extracellular fibrillar aggregates - known as amyloid fibrils - or structurally related intracellular deposits. It is well known that molecular chaperones and elaborate quality control mechanisms exist in the cell to counteract aggregation. However, an increasing number of reports during the past few years indicate that proteins have also evolved structural and sequence-based strategies to prevent aggregation. This review describes these strategies and the selection pressures that exist on protein sequences to combat their uncontrolled aggregation. We will describe the different types of mechanism evolved by proteins that adopt different conformational states including normally folded proteins, intrinsically disordered polypeptide chains, elastomeric systems and multimodular proteins.

Phospholipid interaction induces molecular-level polymorphism in apolipoprotein C-II amyloid fibrils via alternative assembly pathways

A common feature of many of the most important and prominent amyloid-forming proteins is their ability to bind lipids and lipid complexes. Lipids are ubiquitous components of disease-associated amyloid plaques and deposits in humans, yet the specific roles of lipid in the process of amyloid fibril formation are poorly understood. This study investigated the effect of phospholipids on amyloid fibril formation by human apolipoprotein (apo) C-II using phosphatidylcholine derivatives comprising acyl chains of up to 14 carbon atoms. Submicellar concentrations of short-chain phospholipids increase the rate of apoC-II fibril formation in an acyl-chain-length- and concentration-dependent fashion, while high micellar concentrations of phospholipids completely inhibited amyloid formation. At lower concentrations of soluble phospholipid complexes, fibril formation by apoC-II was only partially inhibited, and under these conditions, aggregation followed a two-phase process. Electron microscopy showed that the fibrils resulting from the second phase of aggregation were straight, cablelike, and about 13 nm wide, in contrast to the homogeneous twisted-ribbon morphology of apoC-II fibrils formed under lipid-free conditions. Seeding experiments showed that this alternative fibril structure could be templated both in the presence and in the absence of lipid complex, suggesting that the two morphologies result from distinct assembly pathways. Circular dichroism spectroscopy studies indicated that the secondary structural conformation within the straight-type and ribbon-type fibrils were distinct, further suggesting divergent assembly pathways. These studies show that phospholipid complexes can change the structural architecture of mature fibrils and generate new fibril morphologies with the potential to alter the in vivo behaviour of amyloid. Such lipid interactions may play a role in defining the structural features of fibrils formed by diverse amyloidogenic proteins.

The distribution of residues in a polypeptide sequence is a determinant of aggregation optimized by evolution

It has been shown that the propensity of a protein to form amyloid-like fibrils can be predicted with high accuracy from the knowledge of its amino acid sequence. It has also been suggested, however, that some regions of the sequences are more important than others in determining the aggregation process. Here, we have addressed this issue by constructing a set of "sequence scrambled" variants of the first 29 residues of horse heart apomyoglobin (apoMb(1-29)), in which the sequence was modified while maintaining the same amino acid composition. The clustering of the most amyloidogenic residues in one region of the sequence was found to cause a marked increase of the elongation rate (k(agg)) and a remarkable shortening of the lag phase (t(lag)) of the fibril growth, as determined by far-UV circular dichroism and thioflavin T fluorescence. We also show that taking explicitly into consideration the presence of aggregation-promoting regions in the predictive methods results in a quantitative agreement between the theoretical and observed k(agg) and t(lag) values of the apoMb(1-29) variants. These results, together with a comparison between homologous segments from the family of globins, indicate the existence of a negative selection against the clustering of highly amyloidogenic residues in one or few regions of polypeptide sequences.

One-dimensional self-assembly of a rational designed beta-structure peptide

Fabricating various nanostructures based on the self-assembly of diverse biological molecules is now of great interest to the field of bionanotechnology. In this study, we report a de novo designed peptide (T1) with a preferential beta-hairpin forming property that can spontaneously assemble into nanofibrils in ultrapure water. The nanofibrils assembled by T1 could grow up to tens of microns in length with a left-handed helical twist and an average height of 4.9 +/- 0.9 nm. Moreover, protofilaments and nucleus structures both with a similar height of 1.4 +/- 0.2 nm were observed during fibrilization as well as via sonication of the mature nanofibrils. A typical conformational transition from random coil to beta-structure was observed in association with the fibrilization. Molecular modeling of T1 assemblies displayed that the beta-hairpin molecules organize in a parallel fashion in which the beta-strands align in an antiparallel fashion and each adjoining beta-strand runs left-handed twist at about 2.9 degrees with respect to the one located before it along the fibrillar axis. It also revealed that the maximum thickness of the assembly intermediate, the helical tape structure, is about 1.4 nm and four tapes can further assemble into a fibril with a diameter of about 4.1 nm. Taken together the results obtained by AFM, CD, and molecular modeling, T1 fibrilization probably undergoes a hierarchy approach, in which the aromatic stacking and the electrostatic interactions between the assembled structures are most likely the two major factors directing the one-dimensional self-assembly. Based on these studies, we propose T1 can be used as a model peptide to investigate the beta-sheet based self-assembly process and could be a potential bioorganic template to develop functional materials.

Formation of structured polymers upon controlled denaturation of β-lactoglobulin with different chaotropes

Prolonged exposure (>90 days) of bovine beta-lactoglobulin (BLG) to subdenaturing concentrations of either urea or potassium thiocyanate resulted in the formation of ordered polymers in the form of fibrils. The fibrils obtained with each chaotrope showed major differences in morphology, surface properties, thiol accessibility, and stability to dissociating agents as a consequence of the different chemical bonds involved in their stabilization. Hydrophobic interactions between BLG monomers are predominant in thiocyanate-formed fibrils, whereas urea-formed fibrils are stabilized by intermolecular disulfides generated through a thiol-disulfide exchange reaction. The different features of fibrils obtained with each chaotrope relate to the peculiar structural features and chemical properties of the "active" monomers generated by subdenaturing chaotrope concentrations in the early phases of the polymerization process, as detected by spectroscopic and limited proteolysis/mass spectrometry studies in the earliest stages of the action of individual chaotropes. The chaotrope-specific features of these early intermediates in turn affect the polymerization mechanism, whose intermediates were studied by size-exclusion chromatography on the soluble fraction at different times of fibril formation. The potential of these findings for the production of protein-derived nanostructures having different and controlled geometries and chemical properties is also discussed.