Starch digestibility in food matrix: a review

Effect of baking conditions on resistant starch: Model systems and cake formulations

Five ingredients rich in RS (resistant starch) were assessed in a model system simulating baking process (water addition 30-50%, 180 °C/35 min) and in reformulated cakes (50% replacement of wheat flour). Moreover, two enzymatic methods used for RS determination (official and rapid) were compared. The combined effect of heating and water addition (50%) significantly decreased the RS content in all ingredients. Reformulated vegan cakes presented significantly lower RS values than those theoretically expected, according to the RS value of raw ingredients. The highest RS amount was observed for Hi Maize, which kept 84% and 72% of the initial RS content in the model systems and cake, respectively. Only the cakes made with Hi Maize reached the criteria for the health claim related to the reduction of post-prandial glycemic response (European Union regulation). Finally, differences between the official and rapid methods were less significant in the cakes than in the model systems.

Comparative analysis of granular starch hydrolysis and multi-structural changes by diverse α-amylases sources: Insights from waxy rice starch

Three cultivars of waxy rice starch with different multi-scale structures were subjected to α-amylase hydrolysis to determine amylopectin fine structure, production of oligosaccharides, morphology, and crystallinity of the partially hydrolyzed starch granules. α-amylases hydrolyzed the amylopectin B2 chain during the initial stage of hydrolysis, suggesting that it is primarily located in the outer shell of the granules. For waxy rice starch with loose structure, α-amylases attacked the crystalline and amorphous regions simultaneously in the initial stage, while for starch granules with compact structure, the outer shell blocklet (crystalline structure) can be a hurdle for α-amylases to proceed to hydrolysis of the internal granule structure. The ability of α-amylases from porcine pancreatic α-amylases to attack the outer shell crystalline structure was lower than that of α-amylases from Bacillus amyloliquefaciens and Aspergillus oryzae. These results show that α-amylase source and rice cultivar combinations can be used to generate diverse structures in degraded waxy rice starch.

Pre-dry heat treatment alters the structure and ultimate in vitro digestibility of wheat starch-lipids complex in hot-extrusion 3D printing

Herein, we proposed dry heat treatment (DHT) as a pre-treatment method for modifying printed materials, with a particular focus on its application in the control of starch-lipid interactions during hot-extrusion 3D printing (HE-3DP). The results showed that pre-DHT could promote the complexation of wheat starch (WS) and oleic acid (OA)/corn oil (CO) during HE-3DP and thus increase the resistant starch (RS) content. From the structural perspectives, pre-DHT could break starch molecular chains into lower relative molecular weight which enhanced the starch-lipids hydrophobic interactions to form the V-type crystalline structure during HE-3DP. Notably, pre-DHT could also induce the formation of complexed structure which was maintained during HE-3DP. Compared with CO, OA with linear hydrophobic chains was easier to enter the spiral cavity of starch to form more ordered structures, resulting in higher RS content of 27.48 %. Overall, the results could provide basic data for designing nutritional starchy food systems by HE-3DP.

Effects of food processing on in vitro glucose release of high methylester pectin-enriched doughs

The incidence of type 2 diabetes is linked to consuming processed, high-glycemic foods low in dietary fiber. Soluble dietary fibers are known to improve blood glucose tolerance. This study examined the impact of processing on the in vitro glucose release of fiber-rich, high-glycemic foods. The impact of composition and microstructure on in vitro glucose release and starch digestibility was evaluated in doughs - untreated, baked at 180 °C, and extruded at 150 °C and 180 °C - with partial enrichment of high-methylester pectin. Pectin enrichment decreased starch digestibility, altered the food matrix, and doubled in vitro chyme-viscosity resulting in reduced glucose release in baked (180 °C), and extruded (150 °C) products. Baking or extrusion cooking increased starch digestibility - converting slowly into rapidly available starch and free glucose. Additionally, resistant starch levels were enhanced by up to fivefold. The variations in glucose release originated from a complex interplay between starch digestibility, viscosity, and the food matrix.

In vitro gastric digestion of polysaccharides in mixed dispersions: Evaluating the contribution of human salivary α-amylase on starch molecular breakdown

The aim of this work was to investigate the impact of the addition of salivary α-amylase on starch hydrolysis in protein-containing dispersions during an in vitro digestion process. In vitro digestion provides useful insights on the fate of nutrients during gastro-intestinal transit in complex food matrices, an important aspect to consider when developing highly nutritious foods. Many foods contain polysaccharides, and as their disruption in the gastric stage is limited, salivary α-amylase is often neglected in in vitro studies. A reference study on the effect of salivary α-amylase using one of the most advanced and complex in vitro digestion models (INFOGEST) is, however, not available. Hence, this work reports the gastrointestinal breakdown of three mixed dispersions containing whey protein isolate with different polysaccharides: potato starch, pectin from citrus peel and maize starch. The latter was also studied after heating. No polysaccharide or salivary α-amylase-dependent effect on protein digestion was found, based on the free NH2 and SDS-PAGE. However, in the heat-treated samples, the addition of salivary α-amylase showed a significantly higher starch hydrolysis compared to the sample without α-amylase, due to the gelatinization of the starch granules, which improved the accessibility of the starch molecules to the enzyme. This work demonstrated that the presence of different types of polysaccharides does not affect protein digestion, but also it emphasizes the importance of considering the influence of processing on food structure and its digestibility, even in the simplest model systems.

Advancements in understanding low starch hydrolysis in pigmented rice: A comprehensive overview of mechanisms

This review explores the health-promoting properties of pigmented rice, focusing on its unique ability to promote slow starch digestion and improve blood sugar regulation. While the impact of slow starch digestibility is widely acknowledged, our current understanding of the underlying mechanisms remains insufficient. Therefore, this review aims to bridge the gap by examining the intricate factors and mechanisms that contribute to the low starch hydrolysis of pigmented rice to better understand how it promotes slower starch digestion and improves blood sugar regulation. This paves the way for future advancements in utilizing pigmented rice by enhancing our understanding of the mechanisms behind low starch hydrolysis. These may include the development of food products aimed at mitigating hyperglycemic symptoms and reducing the risk of diabetes. This research broadens our understanding of pigmented rice and facilitates the development of strategies to promote health outcomes by incorporating pigmented rice into our diets.

How food matrices modulate folate bioaccessibility: A comprehensive overview of recent advances and challenges

The incomplete absorption of dietary folate makes it crucial to understand how food matrices affect folate bioaccessibility. Bioavailability encompasses bioaccessibility, which depicts the proportion that is liberated from the food matrix during digestion and becomes available for absorption. Bioavailability studies are expensive and difficult to control, whereas bioaccessibility studies utilize in vitro digestion models to parameterize the complex digestion, allowing the evaluation of the effect of food matrices on bioaccessibility. This review covers the folate contents in various food matrices, the methods used to determine and the factors affecting folate bioaccessibility, and the advances and challenges in understanding how food matrices affect folate bioaccessibility. The methods for determining bioaccessibility have been improved in the last decade. Current research shows that food matrices modulate folate bioaccessibility by affecting the liberation and stability of folate during digestion but do not provide enough information about folate and food component interactions at the molecular level. In addition, information on folate interconversion and degradation during digestion is scant, hindering our understanding of the impact of food matrices on folate stability. Moreover, the role of conjugase inhibitors should not be neglected when evaluating the nutritional value of food folates. Due to the complexity of food digestion, holistic methods should be applied to investigate bioaccessibility. By synthesizing the current state of knowledge on this topic, this review highlights the lack of in-depth understanding of the mechanisms of how food matrices modulate folate bioaccessibility and provides insights into potential strategies for accurate evaluation of the nutritional value of dietary folate.

Co-ingestion of Cereals and Legumes during Infant Complementary Feeding: Starch and Protein in vitro Digestion

This study explores the impact of co-ingesting cereals and legumes on starch and protein during simulated infant in vitro digestion. Various legumes (chickpeas, lentils, peas) were added to cereals (durum wheat, brown rice, white maize), and their effects on starch and protein hydrolysis were analyzed. Substituting 50% of cereal with legumes increased proteins, minerals, and dietary fiber. Infant food with legumes exhibited smoother pasting properties. Legumes in cereal purées led to varying starch hydrolysis trends, with the lowest values in durum wheat with chickpea and all cereal blends with peas. Resistant starch levels exceeding 50% were found in infant food samples. Digested protein hydrolysis increased with legumes in durum wheat, except for peas. Brown rice mixtures decreased significantly compared to the control with chickpeas (61%) and peas (42%), while lentil blends increased by 46%. Legumes generally did not significantly affect starch bioavailability, even with α-amylase inhibitors. Lentil-cereal purées could enhance infant food nutritional value.

Effect of Sprouted Buckwheat on Glycemic Index and Quality of Reconstituted Rice

This study utilized sprouted buckwheat as the main component and aimed to optimize its combination with other grains to produce reconstituted rice with enhanced taste and a reduced glycemic index (GI). The optimal blend comprised wheat flour, sprouted buckwheat flour, black rice flour, and purple potato flour in a ratio of 34.5:28.8:26.7:10.0. Based on this blend, the reconstituted rice processed through extrusion puffing exhibited a purple-black hue; meanwhile, the instant reconstituted rice, produced through further microwave puffing, displayed a reddish-brown color. both imparted a rich cereal flavor. The starch in both types of rice exhibited a V-shaped structure with lower relative crystallinity. Compared to commercial rice, the reconstituted rice and instant reconstituted rice contained higher levels of flavonoids, polyphenols, and other flavor compounds, along with 1.63-fold and 1.75-fold more proteins, respectively. The GI values of the reconstituted rice and the instant reconstituted rice were 68.86 and 69.47, respectively; thus, they are medium-GI foods that can alleviate the increase in blood glucose levels.

Starch from Unripe Apples (Malus domestica Borkh) as an Alternative for Application in the Food Industry

This study investigated the properties of starch isolated from the unripe fruit of two apple cultivars (Malus domestica Borkh) grown in southern Poland (Central Europe). The chemical composition of both starches, molecular mass, their granulation, thermal characteristics, swelling characteristics, and rheological characteristics were studied. The starches differed significantly in ash, phosphorus, and protein content. The water-binding capacity at temperatures of 25-65 °C was similar, while differences of 20% appeared at higher temperatures. In contrast, a significant difference was found in the solubility of the two starches in the temperature range of 25-75 °C. The study showed that apple starches have a relatively low tendency to retrograde, with the enthalpy of gelatinization for starch from the Oliwka variety being 40% higher than that from the Pyros variety. However, the starches differed in the hardness of the gels formed, i.e., one variety formed soft gels with an internal structure resistant to external forces, while the other formed hard gels.

Extraction process, physicochemical properties, and digestive performance of red yeast rice starch

In the present study, taking red yeast rice (RYR) as the raw material, the optimum extraction process of RYR starch was investigated through a single-factor experiment and the Box-Behnken design: The liquid-to-solid ratio was 5 mL/g, the concentration of sodium hydroxide solution was 0.075 mol/L, and the extraction time was 3.1 h. Under these extraction conditions, the extraction rate of starch reached 90.077%. To explore the influence of solid-state fermentation on RYR starch, three different fermentation stages of RYR starch, raw rice starch, semi-gelatinized rice starch, and RYR starch were used as test materials to determine the changes in the physicochemical properties and glycemic index (GI) values of RYR starch during solid-state fermentation. The results showed that with the advancement of the RYR solid-state fermentation process, the starch particle size gradually increased, the light transmittance gradually decreased, and the solubility and swelling power significantly increased. In addition, the amylose content of starch gradually increased, whereas the amylopectin content gradually decreased; the content of fast digestible starch and slow digestible starch decreased, whereas the content of resistant starch increased. In parallel, during solid-state fermentation, the hydrolysis index significantly decreased, and the GI values also decreased. In summary, solid-state fermentation reduced the digestibility of RYR starch. These results provide a theoretical basis for the structural and physicochemical properties of RYR starch and lay a foundation for its subsequent application and expansion of RYR starch.

Resistant starch and the gut microbiome: Exploring beneficial interactions and dietary impacts

The intricate relationship between resistant starch (RS) and the gut microbiome presents a dynamic frontier in nutrition science. This review synthesizes current understandings of how RS, an indigestible form of starch found naturally in certain foods and also enhanced through various modification methods, interacts with the gut microbiome. We particularly focus on how RS fermentation in the colon contributes to the production of beneficial volatile fatty acids (VFAs) such as butyrate, acetate, and propionate. These VFAs have been recognized for their vital roles in maintaining gut barrier integrity, modulating inflammation, and potentially influencing systemic health. Additionally, we discuss the dietary implications of consuming foods rich in RS, both in terms of gut health and broader metabolic outcomes. By consolidating these insights, we emphasize the significance of RS in the context of dietary strategies aimed at harnessing the gut microbiome's potential to impact human health.

Influence of starch-protein interactions on the digestibility and chemical properties of a 3D-printed food matrix based on salmon by-product proteins

This study evaluated the influence of starch-protein interactions on the chemical properties and digestibility of a 3D-printed gel based on salmon by-product protein. Changes in the starch-protein interactions of the stable cornstarch (CS, 15%) and salmon protein isolate (SPI, 4%-12%) printable gels during the in vitro gastrointestinal digestion process were studied by principal component analysis. Protein-rich printed gels increased resistant starch content by 18.05%. Changes in chemical properties and the starch-protein concentration of the gels during the digestion process were highly correlated. The CS-SPI gels in the gastric and intestinal phases exhibited lower α-helix/β-sheet ratio and fluorescence intensity values, whereas surface hydrophobicity increased. This resulted in more ordered structures with a high level of molecular interaction that inhibited enzymatic hydrolysis. This study provides crucial information about the transformations of starch-protein interactions during the digestibility of 3D-printed food matrices as an alternative source of nutrients with a high nutritional quality.

Preparation of starch-palmitic acid complexes by three different starches: A comparative study using the method of heating treatment and autoclaving treatment

Recent research emphasizes the growing importance of starch-lipid complexes due to their anti-digestibility ability, prompting a need to explore the impact of different starch sources and preparation methods on their properties. In this study, starch-palmitic acid (PA) complexes were prepared by three different starches including Tartary buckwheat starch (TBS), potato starch (PTS), and pea starch (PS) by heating treatment (HT) and autoclaving treatment (AT), respectively, and their physicochemical property and in vitro digestibility were systematically compared. The formation of the starch-PA complex was confirmed through various characterization techniques, including scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and X-ray diffraction. Among the complexes, the PTS-PA complex exhibited the highest complexation index over 80 %, while the PS-PA complex had the lowest rapid digestible starch content (56.49-59.42 %). Additionally, the complexes prepared by AT exhibited higher resistant starch content (41.95-32.46 %) than those prepared by HT (31.42-32.49 %), while the complexes prepared by HT held better freeze-thaw stability and hydration ability than those prepared by AT. This study highlights the important role of starch sources in the physicochemical and digestibility properties of starch-lipid complex and the potential application of AT in the preparation of novel resistant starch.

New Insight into the Effects of Endogenous Protein and Lipids on the Enzymatic Digestion of Starch in Sorghum Flour

The effects of endogenous lipids and protein in sorghum flour on starch digestion were studied following the depletion of lipids and/or protein and after the reconstitution of separated fractions. The removal of protein or lipids moderately increases the digestibility of starch in raw (uncooked) sorghum flour to values close to those for purified starch. Rapid Visco Analyzer data (as a model for the cooking process) show that cooked sorghum flours with lipids have a lower starch digestibility than those without lipids after RVA processing, due to the formation of starch-lipid complexes as evidenced by their higher final viscosity and larger enthalpy changes. Additionally, the formation of a starch-lipid-protein ternary complex was identified in cooked sorghum flour, rather than in a reconstituted ternary mixture, according to the unique cooling stage viscosity peak and a greater enthalpy of lipid complexes. After heating, the sorghum flour showed a lower digestibility than the depleted flours and the reconstituted flours. The results indicate that the natural organization of components in sorghum flour is an important factor in facilitating the interactions between starch, lipids, and protein during RVA processing and, in turn, reducing the starch digestion.

Application and functional properties of millet starch: Wet milling extraction process and different modification approaches

In the past decade, the demand and interest of consumers have expanded for using plant-based novel starch sources in different food and non-food processing. Therefore, millet-based value-added functional foods are acquired spare attention due to their excellent nutritional, medicinal, and therapeutic properties. Millet is mainly composed of starch (amylose and amylopectin), which is primary component of the millet grain and defines the quality of millet-based food products. Millet contains approximately 70 % starch of the total grain, which can be used as a, ingredient, thickening agent, binding agent, and stabilizer commercially due to its functional attributes. The physical, chemical, and enzymatic methods are used to extract starch from millet and other cereals. Numerous ways, such as non-thermal physical processes, including ultrasonication, HPP (High pressure processing) high-pressure, PEF (Pulsed electric field), and irradiation are used for modification of millet starch and improve functional properties compared to native starch. In the present review, different databases such as Scopus, Google Scholar, Research Gate, Science Direct, Web of Science, and PubMed were used to collect research articles, review articles, book chapters, reports, etc., for detailed study about millet starch, their extraction (wet milling process) and modification methods such as physical, chemical, biological. The impact of different modification approaches on the techno-functional properties of millet starch and their applications in different sectors have also been reviewed. The data and information created and aggregated in this study will give users the necessary knowledge to further utilize millet starch for value addition and new product development.

Low glycemic index noodle and pasta: Cereal type, ingredient, and processing

The consumption of noodles with a high glycemic index (GI) can affect health, prompting the need for dietary adjustments to manage abnormal blood glucose levels. This review delves into recent progress in low GI noodles and their potential effect for human well-being. Diverse approaches, encompassing the incorporation of soluble dietary fiber, modified starches, proteins, and plant polyphenols, have shown encouraging outcomes in diminishing the GI of noodles. Furthermore, variations in processing, storage, and cooking techniques can influence the GI of noodles, yielding both positive and negative impacts on their glycemic response. Soluble dietary fiber, protein cross-linkers, and plant polyphenols play a pivotal role in reducing the GI of noodles by hindering the interaction between digestive enzymes and starch, thereby curbing enzymatic activity. Future research spotlighting ingredients, processing methodologies, and the underlying mechanisms of low GI noodles will contribute substantively to the development of functional foods boosting enhanced nutritional profiles.

Effect of non-starch components on the structural properties, physicochemical properties and in vitro digestibility of waxy highland barley starch

Highland barley (HB) endosperm with an amylose content of 0-10 % is called waxy HB (WHB). WHB is a naturally slow-digesting grain, and the interaction between its endogenous non-starch composition and the WHB starch (WHBS) has an important effect on starch digestion. This paper focuses on the mechanisms by which the components of β-glucan, proteins and lipids affect the molecular, granular, crystalline structure and digestive properties of WHBS. After eliminating the main nutrients except for starch, the estimated glycemic index (eGI) of the samples rose from 62.56 % to 92.93 %, and the rapidly digested starch content increased from 60.81 % to 98.56 %, respectively. The resistant starch (RS) content, in contrast, dropped from 38.61 % to 0.13 %. Comparatively to lipids, β-glucan and protein contributed more to the rise in eGI and decline in RS content. The crystalline characteristics of starch were enhanced in the decomposed samples. The samples' gelatinization properties improved, as did the order of the starch molecules. Protein and β-glucan form a dense matrix on the surface of WHBS particles to inhibit WHBS digestion. In summary, this study revealed the mechanism influencing the digestibility of WHBS from the perspective of endogenous non-starch composition and provided a theoretical basis to develop slow-digesting foods.

Effects of exogenous salicylic acid on starch physicochemical properties and in vitro digestion under heat stress during the grain-filling stage in waxy maize

Waxy maize starch serves as a pivotal component in global food processing and industrial applications, while high temperature (HT) during the grain-filling stage seriously affects its quality. Salicylic acid (SA) has been recognized for its role in enhancing plant heat resistance. Nonetheless, its regulatory effect on the quality of waxy maize starch under HT conditions remains unclear. In this study, two waxy maize varieties, JKN2000 (heat-tolerant) and SYN5 (heat-sensitive) were treated with SA after pollination and then subjected to HT during the grain-filling stage to explore the effect of SA on grain yield and starch quality. The results indicate that exogenous SA under HT treatment led to an increase in kernel weight and starch content in both varieties. Moreover, SA reduced the HT-induced holes on the surfaces of starch granules, enlarged the starch granule size, elevated the amylopectin branching degree, and reduced amylopectin average chain length. Consequently, improvements of pasting viscosity and the decrease of retrogradation percentage of starch were observed with SA under HT. Exogenous SA reduced HT-induced rapidly digestible starch content in SYN5, but had no significant effect on that in JKN2000. In summary, SA pretreatment effectively alleviated the detrimental effects of HT on starch pasting and thermal properties of waxy maize.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40-70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6-66.0) with potential for processing into healthy starchy foods.

SNAPIG: a model to study nutrient digestion and absorption kinetics in growing pigs based on diet and ingredient properties

Current feed formulation and evaluation practices rely on static values for the nutritional value of feed ingredients and assume additivity. Hereby, the complex interplay among nutrients in the diet and the highly dynamic digestive processes are ignored. Nutrient digestion kinetics and diet × animal interactions should be acknowledged to improve future predictions of the nutritional value of complex diets. Therefore, an in silico nutrient-based mechanistic digestion model for growing pigs was developed: "SNAPIG" (Simulating Nutrient digestion and Absorption kinetics in PIGs). Aiming to predict the rate and extent of nutrient absorption from diets varying in ingredient composition and physicochemical properties, the model represents digestion kinetics of ingested protein, starch, fat, and non-starch polysaccharides, through passage, hydrolysis, absorption, and endogenous secretions of nutrients along the stomach, proximal small intestine, distal small intestine, and caecum + colon. Input variables are nutrient intake and the physicochemical properties (i.e. solubility, and rate and extent of degradability). Data on the rate and extent of starch and protein hydrolysis of different ingredients per digestive segment were derived from in vitro assays. Passage of digesta from the stomach was modelled as a function of feed intake level, dietary nutrient solubility and diet viscosity. Model evaluation included testing against independent data from in vivo studies on nutrient appearance in (portal) blood of growing pigs. When simulating diets varying in physicochemical properties and nutrient source, SNAPIG can explain variation in glucose absorption kinetics (postprandial time of peak, TOP: 20-100 min observed vs 25-98 min predicted), and predict variation in the extent of ileal protein and fat digestion (root mean square prediction errors (RMSPE) = 12 and 16%, disturbance error = 12 and 86%, and concordance correlation coefficient = 0.34 and 0.27). For amino acid absorption, the observed variation in postprandial TOP (61 ± 11 min) was poorly predicted despite accurate mean predictions (58 ± 34 min). Recalibrating protein digestion and amino acid absorption kinetics require data on net-portal nutrient appearance, combined with observations on digestion kinetics, in pigs fed diets varying in ingredient composition. Currently, SNAPIG can be used to forecast the time and extent of nutrient digestion and absorption when simulating diets varying in ingredient and nutrient composition. It enhances our quantitative understanding of nutrient digestion kinetics and identifies knowledge gaps in this field of research. Already useful as research tool, SNAPIG can be coupled with a postabsorptive metabolism model to predict the effects of dietary and feeding-strategies on the pig's growth response.

Discrepancies in resistant starch and starch physicochemical properties between rice mutants similar in high amylose content

The content of resistant starch (RS) was considered positively correlated with the apparent amylose content (AAC). Here, we analyzed two Indica rice mutants, RS111 and Zhedagaozhi 1B, similar in high AAC and found that their RS content differed remarkably. RS111 had higher RS3 content but lower RS2 content than Zhedagaozhi 1B; correspondingly, cooked RS111 showed slower digestibility. RS111 had smaller irregular and oval starch granules when compared with Zhedagaozhi 1B and the wild type. Zhedagaozhi 1B showed a B-type starch pattern, different from RS111 and the wild type, which showed A-type starch. Meantime, RS111 had more fa and fb1 but less fb3 than Zhedagaozhi 1B. Both mutants showed decreased viscosity and swelling power when compared with the parents. RS111 had the lowest viscosity, and Zhedagaozhi 1B had the smallest swelling power. The different fine structures of amylopectin between RS111 and Zhedagaozhi 1B led to different starch types, gelatinization properties, paste viscosity, and digestibility. In addition to enhancing amylose content, modifications on amylopectin structure showed great potent in breeding rice with different RS2 and RS3 content, which could meet the increasing needs for various rice germplasms.

Physicochemical properties, phenolic content and in vitro digestion profile of Chinese black rice (Oryza sativa L.)

Yangxian black rice, as one of the ancient Chinese black rice varieties, is widely planted in the Yangxian area of China. This study investigated the physicochemical properties, phenolic content and in vitro digestion profile of Chinese black rice under gradient milling treatment. The chemical composition, color, pasting and thermal properties of black rice with different milling degrees were comprehensively compared. In vitro digestion analysis indicated that cooked rice flour had higher rapidly digestible starch (RDS) and lower resistant starch (RS) contents compared with the uncooked one. Besides, all cooked black rice samples exhibited high predicted glycemic index (pGI) value and whole black rice showed a lower pGI than refined rice. The microstructure and the abundance of phenolic compounds in the solid matrix during different treatments or digestion stages were observed by CLSM. Furthermore, a total of 102 phenolic constituents were absolutely quantified by targeted metabolomics techniques. Methanol extraction and moderate cooking treatment contributed to the release of phenolic compounds from the solid matrix of whole black rice. Besides, compared to the gastric digestion stage, the transition in the intestinal environment caused a decrease in the majority of the analyzed polyphenols. Identifying the phenolic constituents was favorable for a better elucidation of the chemical basis of the function and nutritional value of Chinese black rice.

Impacts of fatty acid type on binding state, fine structure, and in vitro digestion of debranched starch-fatty acid complexes with different debranching degrees

This study aimed to investigate the effects of fatty acid (FA) type on the binding state, fine structure, and digestibility of debranched maize starch (DMS)-FA complexes with different enzymatic debranching degrees. Maize starch was hydrolyzed by pullulanase for 1 h (DMS1h) and 6 h (DMS6h) and then complexed with seven types of FAs with varying chain lengths and unsaturation degrees, respectively. All the DMS-FA complexes showed V_6III-type and B-type crystals. Complex formation greatly increased the relative crystallinity of DMS, but significantly decreased its order degree of short-range structure (p < 0.05). Compared with unsaturated FAs, saturated FAs possessed stronger intermolecular interactions with DMS. DMS6h-FA complexes exhibited a markedly higher complexing degree (p < 0.05) than the corresponding DMS1h-FA complexes. The FA molecules in DMS1h-FA complexes were primarily physically trapped outside the amylose helices, whereas those in DMS6h-FA complexes were mainly weakly bound to the cavity of amylose helices. The resistant starch (RS) content and relative crystallinity of DMS-FA complexes considerably increased with increasing FA chain length. Furthermore, the highest RS content (38.90 %) and relative crystallinity (24.23 %) were observed in DMS6h-FA complexes. The FA unsaturation degree induced little effect on the RS content and long-range structural order of the complexes.

Effect of protein on the gelatinization behavior and digestibility of corn flour with different amylose contents

The effects of endogenous proteins on the gelatinization behavior and digestibility of waxy corn flour (WCF), normal corn flour (NCF) and high amylose corn flour (HCF) were systematically investigated. Microscopic characteristics showed that the proteins surrounded multiple starch granules, which led to an increase in the particle size of the corn flour, but no significant change in the relative crystallinity. Small angle x-ray scattering experiments during pasting revealed that the starch granules of NCF remained compact, while WCF and HCF were relatively loose. Carbon-13 nuclear magnetic resonance spectroscopy (13C NMR) showed that the proteins retained the helical structure of starch allowing NCF to have a higher Resistant starch(RS) content. The presence of protein led to a decrease in swelling power, viscosity, and in vitro digestibility of starch, and a noticeable increase in gelatinization temperature and thermal stability. RS increased most significantly in NCF from 3.86 % to 15.27 %. The effect of protein on the water activity of starch with different amylose contents after pasting was also inconsistent. This study will contribute to the understanding of the interaction between starch and protein in corn flours with different amylose contents and contribute to the development of corn flours.

The impact of differently structured starch gels on the gastrointestinal fate of a curcumin-containing nanoemulsion

In this study, we focused on the in vitro gastrointestinal digestion of curcumin-nanoemulsion-loaded corn starch gels formed using starches with different amylose contents, i.e. waxy (WCS), normal (NCS) and high amylose (HACS) corn starches and their impact on the release and bioaccessibility of curcumin. Curcumin nanoemulsion (CNE) loading significantly increased the storage modulus of the WCS and NCS gels by interspersing in the gelatinized continuous phase, whereas it decreased in the HACS gel due to the formation of a weak network structure as a result of the incomplete gelatinized amylose granules. During the gastric digestion, the disintegration and emptying of the WCS + CNE gel from the stomach was the slowest compared to the other two gels. The changes in the stomach, influenced the emptying of total solids (HACS + CNE > NCS + CNE > WCS + CNE) into the gastric digesta, which further affected the rate of starch and lipid digestion during the intestinal phase. The HACS + CNE and NCS + CNE gels showed a higher and faster release of curcumin compared to the WCS + CNE gel that showed a slower and sustained release during the intestinal digestion. This study demonstrated that the oral-gastric digestion of these starch gels was more dependent on the gel structures rather than on the molecular properties of the starches. The dynamic gastric environment resulted in the formation of distinct gel structures, which significantly influenced the composition and microstructure of the emptied digesta, further affecting starch hydrolysis and curcumin bioaccessibility in the small intestine.

Minor millets: a review on nutritional composition, starch extraction/modification, product formulation, and health benefits

Minor millet grains are the abode of healthy constituents of human concern that contribute to healthy longevity. Additionally, they are excellent in nutritional value including macronutrients namely, protein (7-13%), carbohydrates (60-70%), fat (1.5-5%), fiber (2-7%) and for micronutrients as well namely; iron, calcium, phosphorus, and magnesium, etc. All these beneficial traits along with the availability of bioactive constituents (polyphenols and antioxidants) prove them to be therapeutic in action and also uplift the immunity among users. Employed isolation tactics for starch also govern yield characteristics and is usually preferred by way of wet method. Minor millets are abundant in starch (50-70%) thus application broadness is another attribute which could be addressed in vivid food segments. In case, native starches somehow possess least application credentials in food and non-food sectors thus modification is the only alternative to eliminate shortcomings. As in trend, modification using physical, chemical, and enzymatic ways have a wide impact on the properties of millet starch. The present review summarizes the nutritional, bioactive and therapeutic potential of minor millets, along with ways of starch modification and product development through millet involvement. © 2023 Society of Chemical Industry.

Effects of different starch structures on energy metabolism in pigs

BACKGROUND

Starch is a major component of carbohydrates and a major energy source for monogastric animals. Starch is composed of amylose and amylopectin and has different physiological functions due to its different structure. It has been shown that the energy supply efficiency of amylose is lower than that of amylopectin. However, there are few studies on the effect of starch structure on the available energy of pigs. The purpose of this study was to measure the effect of different structures of starch in the diet on the net energy (NE) of pigs using a comparative slaughter method and to establish a prediction equation to estimate the NE of starch with different structures. Fifty-six barrows (initial BW 10.18 ± 0.11 kg) were used, and they were housed and fed individually. Pigs were divided into 7 treatments, with 8 replicates for each treatment and 1 pig for each replicate. One of the treatments was randomly selected as the initial slaughter group (ISG). Pigs in the remaining treatments were assigned to 6 diets, fed with basic diet and semi-pure diets with amylose/amylopectin ratio (AR) of 3.09, 1.47, 0.25, 0.15 and 0.12, respectively. The experiment lasted for 28 d.

RESULTS

Results showed that compared with the high amylose (AM) groups (AR 3.09 and 1.47), the high amylopectin (AP) group (AR 0.15) significantly increased the final BW, average daily weight gain and average daily feed intake of pigs (P < 0.05), but the F:G of the AM group was lower (P < 0.01). In addition, AR 0.15 and 0.12 groups have higher (P < 0.01) nutrient digestibility of dry matter, crude protein, gross energy and crude ash. Meanwhile, compared with other groups, AR 0.15 group has a higher (P < 0.05) NE intake and energy retention (RE). The regressive equation for predicting with starch structures was established as RE = 1,235.243 - 48.298AM/AP (R2 = 0.657, P = 0.05).

CONCLUSIONS

In conclusion, NE intake and RE of pigs augmented with the increase of dietary amylopectin content, indicating that diets high in amylopectin were more conducive to promoting the growth of pigs in the late conservation period.

Plant-Derived Biomaterials and Their Potential in Cardiac Tissue Repair

Cardiovascular disease remains the leading cause of mortality worldwide. The inability of cardiac tissue to regenerate after an infarction results in scar tissue formation, leading to cardiac dysfunction. Therefore, cardiac repair has always been a popular research topic. Recent advances in tissue engineering and regenerative medicine offer promising solutions combining stem cells and biomaterials to construct tissue substitutes that could have functions similar to healthy cardiac tissue. Among these biomaterials, plant-derived biomaterials show great promise in supporting cell growth due to their inherent biocompatibility, biodegradability, and mechanical stability. More importantly, plant-derived materials have reduced immunogenic properties compared to popular animal-derived materials (e.g., collagen and gelatin). In addition, they also offer improved wettability compared to synthetic materials. To date, limited literature is available to systemically summarize the progression of plant-derived biomaterials in cardiac tissue repair. Herein, this paper highlights the most common plant-derived biomaterials from both land and marine plants. The beneficial properties of these materials for tissue repair are further discussed. More importantly, the applications of plant-derived biomaterials in cardiac tissue engineering, including tissue-engineered scaffolds, bioink in 3D biofabrication, delivery vehicles, and bioactive molecules, are also summarized using the latest preclinical and clinical examples.

Effect of thermal, nonthermal, and combined treatments on functional and nutritional properties of chickpeas

Cicer arietinum or chickpea is an important and highly nutritious pulse, a source of complex carbohydrates, proteins, vitamins, and minerals, considered non-allergenic, and non-GMO crop. Processing technologies play an important role in modifying some chickpea properties and thus increasing its nutritional and health benefits. Herein is summarized and compared the available data on nutritional and functional aspects caused by thermal, nonthermal, and combinations of treatments for chickpea processing. The study focuses on describing the processing conditions necessary to change chickpea matrices aiming to enhance compound bioavailability, reduce anti-nutritional factors and modify functional characteristics for industrial application in product development. Thermal and nonthermal treatments can modify nutrient composition and bioavailability in chickpea matrices. Thermal treatments, moist or dry, prevent microbial spoilage, increase product palatability and increase protein quality. Nonthermal treatments aim to shorten the processing time and use less energy and water sources. Compared to thermal treatments, they usually preserve organoleptic attributes and bioactive compounds in chickpea matrices. Some treatment combinations can increase the efficacy of single treatments. Combined treatments increase antioxidant concentration, protein digestibility and available starch contents. Finally, despite differences among their effects, single and combined treatments can improve the nutritional and physicochemical properties of chickpea matrices.

Harnessing the Magic of the Dairy Matrix for Next-Level Health Solutions: A Summary of a Symposium Presented at Nutrition 2022

An emerging body of scientific evidence demonstrates that the food matrix-the interaction among nutrients, bioactive components, and physical structure of a food-can affect health in significant, unexpected ways beyond its individual nutrients. In particular, research suggests that consumption of dairy foods such as milk, yogurt, and cheese may affect human health in a matrix-dependent fashion. To disseminate and discuss the growing body of evidence surrounding the role of the dairy food matrix on cardiometabolic health, 3 expert researchers on the topic of the food matrix shared the latest science in a session entitled "Next-Level Health Solutions: The Magic of the Matrix" at the American Society for Nutrition's 2022 LIVE ONLINE Conference. This article is a summary of the literature presented and discussed during that session. A substantial body of literature demonstrates that full-fat dairy foods, particularly fermented dairy foods, may beneficially modulate cardiometabolic outcomes depending on an individual's health status. These findings have important implications for current authoritative dietary guidance that recommends the consumption of low-fat or fat-free dairy foods. Furthermore, this evidence may inform practical applications of harnessing dairy's unique profile of bioactives for health promotion and disease prevention at the individual and community levels.

Variation in structural and in vitro starch digestion of pulse cotyledon cells imposed by temperature-pressure-moisture combinations

Starch digestibility in whole pulses is affected by food structural characteristics, which in turn can be modulated by processing methods. In present study, high-pressure steam (HPS) and hydrothermal treatment (HT) with different moisture content were applied to clarify the mechanisms of processing variables affecting in vitro starch digestibility in pulse cells. Based on thermal and X-ray results, the relative crystallinity of cells decreased after HPS and HT treatments. However, HPS-treated cells under higher (>50%) moisture content showed insignificant discrepancies in crystallinity than HT samples. Starch digestion in HPS-treated cells increased with higher moisture content but was still lower than in HT samples. Results of FITC-dextran diffusion and methyl esterification of cell walls indicated that cells with higher wall permeability exhibited relatively higher starch digestibility. This study suggests that the enzyme susceptibility to starch in cells is dominantly influenced by cell wall structure, which could be optimized through processing variables.

High Protein Yangyu jiaotuan (): In Vitro Oral-Gastro-Small Intestinal Starch Digestion and Some Physico-Chemical, Textural, Microstructural, and Rheological Properties

Biomimetic foods are expected to have potential health benefits for the management and prevention of chronic diseases, such as diabetes and cardiovascular disease. In the current research, two commercially available and affordable plant proteins (soy protein isolate-SPI and pea protein isolate-PPI) at two levels (5%, 10%) were added to the Yangyu jiaotuan with the objective of developing a product with reduced glycaemic properties and high protein content while maintaining its original taste and texture. The results showed that several important textural properties such as hardness and chewiness did not change significantly during the refrigerated storage. The storage modulus G' increased with refrigerated storage time for different samples, but there were significant differences among the five samples (with and without protein addition) with respect to frequency dependence during rheological measurements. The in vitro starch digestion experiments showed that the starch hydrolysis of Yangyu jiaotuan decreased considerably (by up to 42.08%) with the increase in PPI content and during refrigerated storage due to starch retrogradation. Protein has protected the microstructure and there was less damage when compared to samples without protein. The bimodal peaks of the particle size distribution curves showed that the newly developed Yangyu jiaotuan contains two different sizes of particles; the smaller particles (~30 μm) corresponded to PPI and starch granules, while the larger particles corresponded to the fragments of the gel network of the starch matrix. Based on the above results, Yangyu jiaotuan mixed with pea protein is a convenient potato staple food product, which complies with the biomimetic potato food very well.

The Microstructure, Rheological Characteristics, and Digestibility Properties of Binary or Ternary Mixture Systems of Gelatinized Potato Starch/Milk Protein/Soybean Oil during the In Vitro Digestion Process

The in vitro digestibility of potato starch-based foods interacting with milk protein and soybean oil was investigated. Microstructures and rheological changes upon digestion were determined. The results showed that the addition of milk proteins (casein and whey protein) promoted gelatinized potato starch digestion, while soybean oil slowed down gelatinized potato starch digestion. A mixture of soybean oil and milk protein promoted the digestion of milk protein, while a mixture of gelatinized potato starch and milk protein inhibited the digestion of milk protein. The mixture of milk protein and/or gelatinized potato starch with soybean oil promoted the release of free fatty acids in soybean oil. The highest release rate of free fatty acids was attained by a mix of milk protein and soybean oil. The mixed samples were digested and observed with a confocal laser scanning microscope. The viscosity of the digestates was determined by a rheometer. Overall, the results demonstrated that the addition of milk protein and soybean oil had an effect on the in vitro digestibility of gelatinized potato starch and its microstructure.

Food matrix design can influence the antimicrobial activity in the food systems: A narrative review

Antimicrobial agents are safe preservatives having the ability to protect foods from microbial spoilage and extend their shelf life. Many factors, including antimicrobials' chemical features, storage environments, delivery methods, and diffusion in foods, can affect their antimicrobial activities. The physical-chemical characteristics of the food itself play an important role in determining the efficacy of antimicrobial agents in foods; however the mechanisms behind it have not been fully explored. This review provides new insights and comprehensive knowledge regarding the impacts of the food matrix, including the food components and food (micro)structures, on the activities of antimicrobial agents. Studies of the last 10 years regarding the influences of the food structure on the effects of antimicrobial agents against the microorganisms' growth were summarized. The mechanisms underpinning the loss of the antimicrobial agents' activity in foods are proposed. Finally, some strategies/technologies to improve the protection of antimicrobial agents in specific food categories are discussed.

Effect of sorbitol on the in vitro starch digestibility in semi-dried black highland barley noodles

Sorbitol is commonly used in semi-dried noodles for holding water, thus extending the shelf life. This research analyzed the effect of sorbitol on the in vitro starch digestibility in semi-dried black highland barley noodles (SBHBN). In vitro starch digestion revealed that the hydrolysis extent and digestive rate decreased with increasing sorbitol addition, although its inhibition abated when added >2 %. Compared with the control, adding 2 % of sorbitol lowered the equilibrium hydrolysis (C_∞) significantly (P < 0.05) from 75.18 to 66.57 % and decreased the kinetic coefficient (k) significantly (P < 0.05) by 20.29 %. Adding sorbitol increased the tightness of microstructure, relative crystallinity, V-type crystal, molecular structure order, and hydrogen bond strength of starch in cooked SBHBN. Meanwhile, gelatinization enthalpy change (ΔH) of starch in raw SBHBN was increased by adding sorbitol. In addition, the swelling power and amylose leaching in SBHBN added with sorbitol were reduced. Pearson correlations analysis observed significant (P < 0.05) correlations among short-range ordered structure, ΔH, and related in vitro starch digestion indexes of SBHBN after being added with sorbitol. These results revealed that sorbitol might form hydrogen bonds with starch, making it a potential additive to lower the eGI in starchy foods.

Structure, thermal stability, and in vitro digestibility of rice starch-protein hydrolysate complexes prepared using different hydrothermal treatments

In this study, rice starch-protein hydrolysate (WPH-S) complexes with high resistant starch (RS) content were prepared by heat-moisture treatment (HMT) and annealing (ANN). The effects of different hydrothermal treatments on the structure and thermal stability of the WPH-S complexes and their relationship with starch digestibility were further discussed. The results showed that RS contents of ANN-WPH-S complexes (35.09-40.26 g/100 g) were higher than that of HMT-WPH-S complexes (24.15-38.74 g/100 g). Under hydrothermal treatments, WPH decreased the hydrolysis kinetic constant (k) of starch form 4.07 × 10^-2-4.63 × 10^-2 min^-1 to 3.29 × 10^-2-3.67 × 10^-2 min^-1. HMT and ANN promoted hydrogen bonding between WPH and starch molecules, thus increasing the molecular size of starch. In addition, the shear stability of WPH-S mixture was improved with the hysteresis loop area decreased after HMT/ANN treatments, resulting in a more stable structure. Most importantly, the hydrothermal treatment made the scatterers of WPH-S complexes denser and the surface smoother. Especially after ANN treatment, the WPH₆₀-S complex formed a denser aggregate structure, which hindered the in vitro digestion of starch to a certain extent. These results enrich our understanding of the regulation of starch digestion by protein hydrolysates under different hydrothermal treatments and have guiding significance for the development of foods with a low glycemic index.

Superheated steam processing of cereals and cereal products: A review

The concept of superheated steam (SS) was proposed over a century ago and has been widely studied as a drying method. SS processing of cereals and cereal products has been extensively studied in recent years for its advantages of higher drying rates above the inversion temperature, oxygen-free environment, energy conservation, and environmental protection. This review provides a brief introduction to the history, principles, and classification of SS. The applications of SS processing in the drying, enzymatic inactivation, sterilization, mycotoxin degradation, roasting, and cooking of cereals and cereal products are summarized and discussed. Moreover, the effects of SS processing on the physicochemical properties of cereals and the qualities of cereal foods are reviewed and discussed. The applications of SS for cereal processing and its effects on cereal properties have been extensively studied; however, issues such as the browning of cereal foods, thermal damage of starch, protein denaturation, and nutrition loss have not been comprehensively studied. Therefore, further studies are required to better understand the mechanism of the quality changes caused by SS processing and to expand the fields of application of SS in the cereal processing industry. This review enhances the understanding of SS processing and presents theoretical suggestions for promoting SS processing to improve the safety and quality of cereals and cereal products.

Yellow Mealworm (Tenebrio molitor) Powder Promotes a High Bioaccessible Protein Fraction and Low Glycaemic Index in Biscuits

Traditional biscuits are considered products with poor nutritional value because of their large share of rapidly digested starch, which results in an elevated glycaemic index. This paper explores the improvement of the nutritional value of biscuits by adding yellow mealworm (Tenebrio molitor) powder. Four biscuit recipes containing 0%(R1), 10%(R2), 15%(R3), and 20%(R4) of yellow mealworm powder were prepared and subjected to sensorial analysis. The R3 biscuits were selected for further investigation, as they had the highest acceptability. Compared to the reference R1, the R3 biscuits showed an improved nutritional profile in terms of protein, fat, ash, minerals, fibres, essential amino acids, and unsaturated fatty acids, and lower amounts of carbohydrates and 5-hydroxymethylfurfural. The in vitro protein digestibility in R3 improved 1.12-fold compared to R1. No significant difference was found between the digestibility of the lipids released from R1 and R3. A higher fraction of slowly digestible starch was present in R3 compared to R1. The starch digestibility and estimated glycaemic index were 72.96% and 79.56% in R3, which can be compared to 78.79% and 90.14%, respectively, in R1. Due to their enhanced nutritional profile, higher bioaccessible protein fraction, and lower glycaemic index, yellow mealworm powder biscuits can be considered a more nutritious alternative to traditional biscuits.

A Prospective Review on the Research Progress of Citric Acid Modified Starch

Citric acid (CA) treatment is a convenient, mild and environmentally friendly strategy to modify the composition, structure and function of starch through hydrolysis and esterification, which expands the application of starch in industry. In this paper, the effects of CA modification on amylose content, amylopectin chain length distribution, microscopic morphology, solubility and swelling ability, thermodynamic properties, gelatinization properties, digestibility properties, texture properties and the film-forming properties of starch were summarized. The application status and development trend of CA modified starch were reviewed, which has important implications for the targeted utilization of CA modified starch in the future.

Highland Barley Starch: Structures, Properties, and Applications

Highland barley (HB) is a nutritious crop with excellent health benefits, and shows promise as an economically important crop with diverse applications. Starch is the main component of HB and has great application potential owing to its unique structural and functional properties. This review details the latest status of research on the isolation, chemical composition, structure, properties, and applications of highland barley starch (HBS). Suggestions regarding how to better comprehend and utilize starches are proposed. The amylopectin content of HBS ranged from 74% to 78%, and can reach 100% in some varieties. Milling and air classification of barley, followed by wet extraction, can yield high-purity HBS. The surface of HBS granules is smooth, and most are oval and disc-shaped. Normal, waxy, and high-amylose HBS have an A-type crystalline. Due to its superb freeze-thaw stability, outstanding stability, and high solubility, HBS is widely used in the food and non-food industries. The digestibility of starch in different HB whole grain products varies widely. Therefore, the suitable HB variety can be selected to achieve the desired glycemic index. Further physicochemical modifications can be applied to expand the variability in starch structures and properties. The findings provide a thorough reference for future research on the utilization of HBS.

Insights into the Supramolecular Structure and Degradation Mechanisms of Starch from Different Botanical Sources as Affected by Extrusion-based 3D Printing

Extrusion-based 3D printing has emerged as the most versatile additive manufacturing technique for the printing of practically any material. However, 3D printing of functional materials often activates thermo-mechanical degradation, which affects the 3D shape quality. Herein, we describe the structural changes of eight different starch sources (normal or waxy) as a consequence of the temperature of an extrusion-based 3D printing system through in-depth characterization of their molecular and structural changes. The combination of size-exclusion chromatography, small-angle X-ray scattering, X-ray diffraction, dynamic viscoelasticity measurements, and in vitro digestion has offered an extensive picture of the structural and biological transformations of starch varieties. Depending on the 3D printing conditions, either gelatinization was attained ("moderate" condition) or single-amylose helix formation was induced ("extreme" condition). The stiff amylopectin crystallites in starch granules were more susceptible to thermo-mechanical degradation compared to flexible amorphous amylose. The crystalline morphology of the starch varieties varied from B-type crystallinity for the starch 3D printing at the "moderate" condition to a mixture of C- and V-type crystallinity regarding the "extreme" condition. The "extreme" condition reduced the viscoelasticity of 3D-printed starches but increased the starch digestibility rate/extent. In contrast, the "moderate" condition increased the viscoelastic moduli, decreasing the starch digestion rate/extent. This was more considerable mainly regarding the waxy starch varieties. Finally, normal starch varieties presented a well-defined shape fidelity, being able to form a stable structure, whereas waxy starches exhibited a non-well-defined structure and were not able to maintain their integrity after printing. The results of this research allow us to monitor the degradability of a variety of starch cultivars to create starch-based 3D structures, in which the local structure can be controlled based on the 3D printing parameters.

Nutritional and bioactive characteristics of buckwheat, and its potential for developing gluten‐free products: An updated overview

In the present era, food scientists are concerned about exploiting functional crops with nutraceutical properties. Buckwheat is one of the functional pseudocereals with nutraceutical components used in the treatment of health-related diseases, malnutrition, and celiac diseases. As a preferred diet as a gluten-free product for celiac diseases, buckwheat is a good source of nutrients, bioactive components, phytochemicals, and antioxidants. The general characteristics and better nutritional profile of buckwheat than other cereal family crops were highlighted by previous investigations. In buckwheats, bioactive components like peptides, flavonoids, phenolic acids, d-fagomine, fagopyritols, and fagopyrins are posing significant health benefits. This study highlights the current knowledge about buckwheat and its characteristics, nutritional constituents, bioactive components, and their potential for developing gluten-free products to target celiac people (1.4% of the world population) and other health-related diseases.

Sharif MS, Md Nor N. The Physicochemical Analysis and Anthocyanin Level of Malaysian Purple Sweet Potato Cracker

Purple Sweet Potato (PSP) in Malaysia is an abandoned crop. Even though it has various health benefits and nutritional values, consumers, especially Malaysians, still lack purple sweet potato consumption. It has a high dietary fibre content, a low glycemic index, and contains proteins, minerals, polyphenols, and anthocyanin. The National Health Morbidity Survey (Malaysia) in 2019 reported that 94% of Malaysian adults lack fiber consumption in their dietary patterns. As a result, it may become an alternative crop for individuals who consume less nutrients and fibre as a result of dietary choices and health issues. This one-of-a-kind crop also contains anti-oxidative, hepatoprotective, anti-inflammatory, anti-tumor, anti-diabetic, anti-microbial, anti-obesity, and anti-aging qualities. Due to the lack of a commercial food product based on this crop, it has become an unpopular crop among Malaysians. Purple sweet potato makes only a few Malaysian sweets and traditional snacks. Nonetheless, Malaysian customers continue to ignore it. Thus, Purple Sweet Potato Cracker was made, and a proximate analysis was conducted to examine its physicochemical content. It was found that the newly developed PSP crackers were high in fiber, vitamins, and minerals, as well as in calcium (1332.08 mg/kg) and contained anthocyanins of 6.68 mg/L. Besides that, this special cracker is free from food preservatives without coloring agents and additives. The processing of Purple Sweet Potato Cracker carries important features for small-medium entrepreneurs, which will contribute to the Malaysian economy perspectives, as it has a good potential to be marketed in domestic and international commercial food outlets.