Insights on wood combustion generated proinflammatory ultrafine particles (UFP)

Toxicity of particulate emissions from residential biomass combustion: An overview of in vitro studies using cell models

This article aims to critically review the current state of knowledge on in vitro toxicological assessments of particulate emissions from residential biomass heating systems. The review covers various aspects of particulate matter (PM) toxicity, including oxidative stress, inflammation, genotoxicity, and cytotoxicity, all of which have important implications for understanding the development of diseases. Studies in this field have highlighted the different mechanisms that biomass combustion particles activate, which vary depending on the combustion appliances and fuels. In general, particles from conventional combustion appliances are more potent in inducing cytotoxicity, DNA damage, inflammatory responses, and oxidative stress than those from modern appliances. The sensitivity of different cell lines to the toxic effects of biomass combustion particles is also influenced by cell type and culture conditions. One of the main challenges in this field is the considerable variation in sampling strategies, sample processing, experimental conditions, assays, and extraction techniques used in biomass burning PM studies. Advanced culture systems, such as co-cultures and air-liquid interface exposures, can provide more accurate insights into the effects of biomass combustion particles compared to simpler submerged monocultures. This review provides critical insights into the complex field of toxicity from residential biomass combustion emissions, underscoring the importance of continued research and standardisation of methodologies to better understand the associated health hazards and to inform targeted interventions.

High time-resolution measurements of ultrafine and fine woodsmoke aerosol number and surface area concentrations in biomass burning kitchens: A case study in Western Kenya

Indoor air pollution associated with biomass combustion for cooking remains a significant environmental health challenge in rural regions of sub-Saharan Africa; however, routine monitoring of woodsmoke aerosol concentrations continues to remain sparse. There is a paucity of field data on concentrations of combustion-generated ultrafine particles, which efficiently deposit in the human respiratory system, in such environments. Field measurements of ultrafine and fine woodsmoke aerosol (diameter range: 10-2500 nm) with field-portable diffusion chargers were conducted across nine wood-burning kitchens in Nandi County, Kenya. High time-resolution measurements (1 Hz) revealed that indoor particle number (PN) and particle surface area (PSA) concentrations of ultrafine and fine woodsmoke aerosol are strongly temporally variant, reach exceedingly high levels (PN > 10⁶ /cm³ ; PSA > 10⁴  μm² /cm³ ) that are seldom observed in non-biomass burning environments, are influenced by kitchen architectural features, and are moderately to poorly correlated with carbon monoxide concentrations. In five kitchens, PN concentrations remained above 10⁵ /cm³ for more than half of the day due to frequent cooking episodes. Indoor/outdoor ratios of PN and PSA concentrations were greater than 10 in most kitchens and exceeded 100 in several kitchens. Notably, the use of metal chimneys significantly reduced indoor PN and PSA concentrations.

In vitro toxicity of particulate matter emissions from residential pellet combustion

Particulate matter emissions (PM₁₀) from the combustion, in a residential stove, of two commercial brands of certified (ENplus A1) pellets, a non-certified brand and laboratory made pellets of acacia were tested for their ability to induce ecotoxic, cytotoxic, and mutagenic responses in unicellular organisms and a human cell line. Ecotoxicity was evaluated through the Vibrio fischeri bioluminescence inhibition assay. Moreover, cytotoxicity was assessed at two time points (24- and 48-hr) through two complementary techniques in order to evaluate the cellular metabolic activity and membrane integrity of human lung epithelial cells A549. The Ames test using two Salmonella typhimurium strains (TA100 and TA98) was employed to assess the mutagenic potential of the polycyclic aromatic hydrocarbon fraction extracted from the PM₁₀ samples. Results obtained with the bioluminescent bacteria indicated that only particles from the combustion of acacia pellets were toxic. All samples induced impairment on the A549 cells metabolic activity, while no significant release of lactate dehydrogenase was recorded. PM₁₀ emissions from acacia pellets were the most cytotoxic, while samples from both certified pellets evoked significant cytotoxicity at lower doses. Cytotoxicity time-dependency was only observed for PM₁₀ from the combustion of acacia pellets and one of the brands of certified pellets. Mutagenic activity was not detected in both S. typhimurium strains. This study emphasises the role of the raw material for pellet manufacturing on the toxicological profile of PM emissions. Alternative raw materials should be deeply investigated before their use in pelletisation and combustion in residential appliances.

On the Redox-Activity and Health-Effects of Atmospheric Primary and Secondary Aerosol: Phenomenology

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity.

Short-term associations between barbecue fumes and respiratory health in young adults

BACKGROUND

Epidemiological studies have associated biomass combustion with (respiratory) morbidity and mortality, primarily in indoor settings. Barbecuing results in high outdoor air pollution exposures, but the health effects are unknown.

OBJECTIVE

The objective was to investigate short-term changes in respiratory health in healthy adults, associated with exposure to barbecue fumes.

METHODS

16 healthy, adult volunteers were exposed to barbecue smoke in outdoor air in rest during 1.5 h, using a repeated-measures design. Major air pollutants were monitored on-site, including particulate matter <2.5 μm (PM_2.5), particle number concentrations (PNC) and black- and brown carbon. At the same place and time-of-day, subjects participated in a control session, during which they were not exposed to barbecue smoke. Before and immediately after all sessions lung function was measured. Before, immediately after, 4- and 18 h post-sessions nasal expression levels of interleukin (IL)-8, IL6 and Tumor Necrosis Factor alpha (TNFα) were determined in nasal swabs, using quantitative polymerase chain reaction. Associations between major air pollutants, lung function and inflammatory markers were assessed using mixed linear regression models.

RESULTS

High PM_2.5 levels and PNCs were observed during barbecue sessions, with averages ranging from 553 to 1062 μg/m³ and 109,000-463,000 pt/cm³, respectively. Average black- and brown carbon levels ranged between 4.1-13.0 and 5.0-16.2 μg/m³. A 1000 μg/m³ increase in PM_2.5 was associated with 2.37 (0.97, 4.67) and 2.21 (0.98, 5.00) times higher expression of IL8, immediately- and 18 h after exposure. No associations were found between air pollutants and lung function, or the expression of IL6 or TNFα.

DISCUSSION

Short-term exposure to air pollutants emitted from barbecuing was associated with a mild respiratory response in healthy young adults, including prolonged increase in nasal IL8 without a change in lung function and other measured inflammatory markers. The results might indicate prolonged respiratory inflammation, due to short-term exposure to barbecue fumes.

Spirometry parameter alterations due to exposure to indoor air pollutants in rural homes in Bogotá, Colombia

The aim of this study was to determine the association between the concentrations of intradomiciliary PM_2.5, CO, and BC and alterations in respiratory function parameters in a population living in rural dwellings in Bogotá, Colombia. For this cross-sectional study, people were recruited from the rural areas of the localities of Usme and Sumapaz in Bogotá. In total, 68 participants were recruited by means of nonrandom sampling. Indoor air monitoring of PM_2.5, BC, and CO was carried out. Additionally, evaluations of pulmonary function were performed using spirometry. The variables of pulmonary function were included in a multiple linear regression by successive steps and adjusted by the main variables described as modifiers of spirometry parameters, which are age, height, sex, disability, and a history of tobacco use. Assumptions of multicollinearity and the randomization of variances in the residuals were evaluated. Negative associations were found between spirometry parameters and the concentrations of indoor air pollutants. For FEV1/FVC and theoretical FEV1, there was a statistically significant association with the concentration of carbon monoxide (p = 0.003 and 0.019, respectively). The environmental concentrations were higher in homes where biomass was used for cooking, but these differences were statistically significant only for BC and CO (p = 0.008 and 0.03, respectively). The concentrations of carbon monoxide in rural homes were associated with alterations in respiratory function parameters.

In vitro toxicity of indoor and outdoor PM10 from residential wood combustion

Particulate matter with aerodynamic diameter < 10 μm (PM₁₀) was collected, indoors and outdoors, when wood burning appliances (open fireplace and woodstove) were in operation. The PM₁₀ ecotoxicity was assessed with the Vibrio fischeri bioluminescence inhibition assay, while the cytotoxicity was evaluated by the WST-8 and lactate dehydrogenase (LDH) release assays using A549 cells. Extracts of PM₁₀-bound polycyclic aromatic hydrocarbons (PAH) were tested for their mutagenicity through the TA98 and TA100 Ames test. The bioluminescent inhibition assay revealed that indoor particles released from the fireplace were the most toxic. Indoors, the reduction in A549 cell metabolic activity was over two times higher for the fireplace in comparison with the woodstove (32 ± 3.2% and 72 ± 7.6% at the highest dose, respectively). Indoor particles from the fireplace were found to induce greater cytotoxicity than the corresponding outdoor samples. Combined WST-8 and LDH results suggest that PM₁₀ exposure induce apoptotic cell death pathway in which the cell membrane integrity is maintained. Indoor and outdoor samples lacked direct and indirect mutagenic activity in any of the tester strains. For indoor-generated PM₁₀, organic carbon and PAH were significantly correlated with cell viability and bioluminescence reduction, suggesting a role of organic compounds in toxicity.

Modeling better in vitro models for the prediction of nanoparticle toxicity: a review

Exposure to nanoparticles (NPs) is plausible in real life due to ambient particulate exposure or development of nanotechnologies, hence the evaluation of NP toxicity as well as mechanism-based studies are necessary. The in vitro models allow rapid testing of NP toxicity, but it is required that the developed in vitro models are reliable to reflect the toxicity of NPs. In this review, we discussed the principles to model better in vitro models to predict the toxicity of NPs based on our own experiences and works of literature. We suggested that in vitro nanotoxicological studies should consider (1) using normal cells because the commonly used cancer cell lines might not reflect the toxicity of NPs to normal tissues; (2) the possible influence of biological molecules to reflect the toxicity of NPs in a biological microenvironment; (3) the influence of pathophysiological conditions to mimic the responses of NPs under different in vivo conditions; and (4) developing advanced tissue-based models to reflect the responses of tissues/organs to NPs. It is our hope that this review may provide useful information for the future design of in vitro nanotoxicological studies.

Comparative study on respiratory function among rural women using biomass fuel and non-biomass fuel: evidence of a cross-sectional survey in Bangladesh

Respiratory diseases' mortality and morbidity have been a major public health burden primarily attributed to widespread exposure to indoor and outdoor pollutants in the environment. The study conducted among 510 Bangladeshi women residing in the northeastern zone of the Sylhet division from semi-urban and rural settings to compare the biomass fuel users (N = 255) with the non-biomass users (N = 255). It has been observed that all the symptoms had a higher prevalence among the women who were exposed to biomass fuel compared with those exposed to clean gas fuel. Women exposed to biomass group reported frequent cough and phlegm production episodes during a 3-month timeline before the survey period which was found statistically higher (p < 0.001) compared with that of the clean gas fuel group. Moreover, the use of biomass fuel has been associated with a significant decrease in forced expiratory volume in one second (FEV₁), forced vital capacity (FVC), and peak expiratory flow rate (PEFR). Appropriate strategies from stakeholders and government authorities in disseminating health hazards from biomass fuel along with supporting the community by providing alternative energy sources for cooking can largely impact people's lives.

Fifteen Years of Airborne Particulates in Vitro Toxicology in Milano: Lessons and Perspectives Learned

Air pollution is one of the world’s leading environmental causes of death. The epidemiological relationship between outdoor air pollution and the onset of health diseases associated with death is now well established. Relevant toxicological proofs are now dissecting the molecular processes that cause inflammation, reactive species generation, and DNA damage. In addition, new data are pointing out the role of airborne particulates in the modulation of genes and microRNAs potentially involved in the onset of human diseases. In the present review we collect the relevant findings on airborne particulates of one of the biggest hot spots of air pollution in Europe (i.e., the Po Valley), in the largest urban area of this region, Milan. The different aerodynamic fractions are discussed separately with a specific focus on fine and ultrafine particles that are now the main focus of several studies. Results are compared with more recent international findings. Possible future perspectives of research are proposed to create a new discussion among scientists working on the toxicological effects of airborne particles.

Household fuel use and adverse pregnancy outcomes in a Ghanaian cohort study

BACKGROUND

Accruing epidemiological evidence suggests that prenatal exposure to emissions from cooking fuel is associated with increased risks of adverse maternal and perinatal outcomes including hypertensive disorders of pregnancy, low birth weight, stillbirth and infant mortality. We aimed to investigate the relationship between cooking fuel use and various pregnancy related outcomes in a cohort of urban women from the Accra region of Ghana.

METHODS

Self-reported cooking fuel use was divided into "polluting" (wood, charcoal, crop residue and kerosene) and "clean" fuels (liquid petroleum gas and electricity) to examine 12 obstetric outcomes in a prospective cohort of pregnant women (N = 1010) recruited at < 17 weeks of gestation from Accra, Ghana. Logistic and multivariate linear regression analyses adjusted for BMI, maternal age, maternal education and socio-economic status asset index was conducted.

RESULTS

34% (n = 279) of 819 women with outcome data available for analysis used polluting fuel as their main cooking fuel. Using polluting cooking fuels was associated with perinatal mortality (aOR: 7.6, 95%CI: 1.67-36.0) and an adverse Apgar score (< 7) at 5 min (aOR:3.83, 95%CI: (1.44-10.11). The other outcomes (miscarriage, post-partum hemorrhage, pre-term birth, low birthweight, caesarian section, hypertensive disorders of pregnancy, small for gestational age, and Apgar score at 1 min) had non-statistically significant findings.

CONCLUSIONS

We report an increased likelihood of perinatal mortality, and adverse 5-min Apgar scores in association with polluting fuel use. Further research including details on extent of household fuel use exposure is recommended to better quantify the consequences of household fuel use.

STUDY REGISTRATION

Ghana Service Ethical Review Committee (GHS-ERC #: 07-9-11).

Ultrafine Particles from Residential Biomass Combustion: A Review on Experimental Data and Toxicological Response

Biomass burning is considered an important source of indoor and outdoor air pollutants worldwide. Due to competitive costs and climate change sustainability compared to fossil fuels, biomass combustion for residential heating is increasing and expected to become the major source of primary particulate matter emission over the next 5-15 years. The understanding of health effects and measures necessary to reduce biomass emissions of harmful compounds is mandatory to protect public health. The intent of this review is to report available data on ultrafine particles (UFPs, i.e., particles with diameter smaller than 100 nm) emitted by residential biomass combustion and their effects on human health (in vitro and in vivo studies). Indeed, as far as we know, papers focusing specifically on UFPs originating from residential biomass combustion and their impact on human health are still lacking.

Airborne Particulate Matter: Human Exposure and Health Effects

OBJECTIVE

Exposure to airborne particulate matter (PM) is estimated to cause millions of premature deaths annually. This work conveys known routes of exposure to PM and resultant health effects.

METHODS

A review of available literature.

RESULTS

Estimates for daily PM exposure are provided. Known mechanisms by which insoluble particles are transported and removed from the body are discussed. Biological effects of PM, including immune response, cytotoxicity, and mutagenicity, are reported. Epidemiological studies that outline the systemic health effects of PM are presented.

CONCLUSION

While the integrated, per capita, exposure of PM for a large fraction of the first-world may be less than 1 mg per day, links between several syndromes, including attention deficit hyperactivity disorder (ADHD), autism, loss of cognitive function, anxiety, asthma, chronic obstructive pulmonary disease (COPD), hypertension, stroke, and PM exposure have been suggested. This article reviews and summarizes such links reported in the literature.

In vitro lung toxicity of indoor PM10 from a stove fueled with different biomasses

Biomass combustion significantly contributes to indoor and outdoor air pollution and to the adverse health effects observed in the exposed populations. Besides, the contribution to toxicity of the particles derived from combustion of different biomass sources (pellet, wood, charcoal), as well as their biological mode of action, are still poorly understood. In the present study, we investigate the toxicological properties of PM10 particles emitted indoor from a stove fueled with different biomasses. PM10 was sampled by gravimetric methods and particles were chemically analyzed for Polycyclic Aromatic Hydrocarbons (PAHs) and elemental content. Human lung A549 cells were exposed for 24 h to 1-10 μg/cm² PM and different biological endpoints were evaluated to comparatively estimate the cytotoxic, genotoxic and pro-inflammatory effects of the different PMs. Pellet PM decreased cell viability, inducing necrosis, while charcoal and wood ones mainly induced apoptosis. Oxidative stress-related response and cytochrome P450 enzymes activation were observed after exposure to all the biomasses tested. Furthermore, after pellet exposure, DNA lesions and cell cycle arrest were also observed. The severe genotoxic and pro-necrotic effects observed after pellet exposure were likely the consequence of the high metal content. By administering the chelating agent TPEN, the genotoxic effects were indeed rescued. The higher content in PAHs measured in wood and charcoal PMs was likely the reason of the enhanced expression of metabolizing and oxidative stress-related enzymes, like CYP1B1 and HO-1, and the consequent increase in apoptotic cell death. These data suggest that combustion particles from different biomass sources may impact on lung cells according to different pathways, finally producing different toxicities. This is strictly related to the PM chemical composition, which reflects the quality of the combustion and the fuel in particular. Further studies are needed to clarify the role of particle dimension and the molecular mechanisms behind the harmful effects observed.

Airborne Nanoparticle Release and Toxicological Risk from Metal-Oxide-Coated Textiles: Toward a Multiscale Safe-by-Design Approach

Nano metal oxides have been proposed as alternatives to silver (Ag) nanoparticles (NPs) for antibacterial coatings. Here, cotton and polyester-cotton fabrics were sonochemically coated with zinc oxide (ZnO) and copper oxide (CuO) NPs. By varying the reaction solvent (water or ethanol), NPs with different sizes and shapes were synthesized. The cytotoxic and pro-inflammatory effects of studied NPs were investigated in vitro in human alveolar epithelial A549 and macrophage-like THP1 cells. To understand the potential respiratory impact of the NPs, the coated textiles were subjected to the abrasion tests, and the released airborne particles were measured. A very small amount of the studied metal oxides NPs was released from abrasion of the textiles coated by the ethanol-based sonochemical process. The release from the water-based coating was comparably higher. Lung and immune cells viability decreased after 24 h of exposure only at the highest studied NPs concentration (100 μg/mL). Different from the ZnO NPs, both formulations of CuO NPs induced IL-8 release in the lung epithelial cells already at subtoxic concentrations (1-10 μg/mL) but not in immune cells. All of the studied NPs did not induce IL-6 release by the lung and immune cells. Calculations revealed that the exposures of the NPs to human lung due to the abrasion of the textiles were lower or comparable to the minimum doses in the cell viability tests (0.1 μg/mL), at which acute cytotoxicity was not observed. The results alleviate the concerns regarding the potential risk of these metal oxide NPs in their applications for the textile coating and provide insight for the safe-by-design approach.

The chemical composition of ultrafine particles and associated biological effects at an alpine town impacted by wood burning

This work is part of the TOBICUP (TOxicity of BIomass Combustion generated Ultrafine Particles) project which aimed at providing the composition of ultrafine particles (UFPs, i.e. particles with aerodynamic diameter, d_ae, lower than 100nm) emitted by wood combustion and elucidating the related toxicity. Results here reported are from two ambient monitoring campaigns carried out at an alpine town in Northern Italy, where wood burning is largely diffused for domestic heating in winter. Wintertime and summertime UFP samples were analyzed to assess their chemical composition (i.e. elements, ions, total carbon, anhydrosugars, and polycyclic aromatic hydrocarbons) and biological activity. The induction of the pro-inflammatory cytokine interleukin-8 (IL-8) by UFPs was investigated in two human cells lines (A549 and THP-1) and in human peripheral blood leukocytes. In addition, UFP-induced oxidative stress and genotoxicity were investigated in A549 cells. Ambient UFP-related effects were compared to those induced by traffic-emitted particles (DEP) taken from the NIES reference material "vehicle exhaust particulates". Ambient air UFPs induced a dose-related IL-8 release in both A549 and THP-1 cells; the effect was more relevant on summer samples and in general THP-1 cells were more sensitive than A549 cells. On a weight basis our data did not support a higher biological activity of ambient UFPs compared to DEP. The production of IL-8 in the whole blood assay indicated that UFPs reached systemic circulation and activated blood leukocytes. Comet assay and γ-H2AX evaluation showed a significant DNA damage especially in winter UFPs samples compared to control samples. Our study showed that ambient UFPs can evoke a pulmonary inflammatory response by inducing a dose-related IL-8 production and DNA damage, with different responses to UFP samples collected in the summer and winter periods.