Liquid-phase microextraction techniques for simplifying sample treatment in capillary electrophoresis

Ionic liquid-based headspace in-tube liquid-phase microextraction coupled with capillary electrophoresis for sensitive detection of phenols

An ionic liquid-based headspace in-tube liquid-phase microextraction (IL-HS-ITLPME) in-line coupled with capillary electrophoresis (CE) is proposed. The method is capable of quantifying trace amounts of phenols in environmental water samples. In the newly developed method, simply by placing a capillary injected with IL in the HS above the aqueous sample, volatile phenols were extracted into the IL acceptor phase in the capillary. After extraction, electrophoresis of the phenols in the capillary was carried out. Extraction parameters such as the extraction time, extraction temperature, ionic strength, volume of the sample solution and IL types were systematically investigated. Under the optimized conditions, enrichment factors for four phenols were from 1510 to 1985. The proposed method provided a good linearity, low limits of detection (below 5.0 ng mL-1 ), and good repeatability of the extractions (RSDs below 6.7%, n = 6). This method was then utilized to analyze two real environmental samples of Xiaoxi Lake and tap water, obtaining acceptable recoveries and precisions. Compared with the usual HS-ITLPME for CE, IL-HS-ITLPME-CE is a simple, low-cost, fast and environmentally friendly pre-concentration technique. This article is protected by copyright. All rights reserved.

Recent trends in capillary electrophoresis for complex samples analysis: A review

CE has been a continuously evolving analytical methodology since its first introduction in the 1980s of the last century. The development of new CE separation procedures, the coupling of these systems to more sensitive and versatile detection systems, and the advances in miniaturization technology have allowed the application of CE to the resolution of new and complex analytical problems, overcoming the traditional disadvantages associated with this method. In the present work, different recent trends in CE and their application to the determination of high complexity samples (as biological fluids, individual cells, etc.) will be reviewed: capillary modification by different types of coatings, microfluidic CE, and online microextraction CE. The main advantages and disadvantages of the different proposed approaches will be discussed with examples of most recent applications.

Analysis of antibiotics by CE and their use as chiral selectors: An update

The widespread use of antibiotics in medicine and as growth-promoting agents has increased the demand for suitable analytical techniques for their analysis. Analytical methods based on CE or miniaturized CE systems have proved over the years their ability for the analysis of antibiotics. Since our last review (Electrophoresis 2014, 35, 28-49) several new CE methodologies have been reported for antibiotic analysis. This review presents an update of the literature published from June 2013 to June 2015 for the analysis of antibiotics by CE. UV continues being the most used detection system for antibiotics analysis by CE. Strategies to improve sensitivity as the use of sensitive detection systems and the application of preconcentration techniques appear to be the major developments. Furthermore, the use of portable and miniaturized devices for antibiotic analysis is presented in detail. Applications of the developed methodologies to the determination of residues of antibiotics in biological, food, and environmental samples are carefully described. Finally, new developments and applications of antibiotics as chiral selectors in CE are also included.

Advance of CE and CEC in phytochemical analysis (2012–2013)

This article presents an overview of the advance of CE and CEC in phytochemical analysis, based on the literature not mentioned in our previous review papers [Chen, X. J., Zhao, J., Wang, Y. T., Huang, L. Q., Li, S. P., Electrophoresis 2012, 33, 168–179], mainly covering the years 2012–2013. In this article, attention is paid to online preconcentration, rapid separation, and sensitive detection. Selected examples illustrate the applicability of CE and CEC in biomedical, pharmaceutical, environmental, and food analysis. Finally, some general conclusions and future perspectives are given.

Sensitive determination of chloroanilines in water samples by hollow fiber-based liquid-phase microextraction prior to capillary electrophoresis with amperometric detection

A hollow fiber-based liquid-phase microextraction method has been developed for enrichment of trace chloroanilines in water samples. Target analytes including aniline, three mono-chlorinated aniline isomers (o-chloroaniline, m-chloroaniline, and p-chloroaniline) and four mono-chlorinated methylaniline isomers (2-chloro-4-methylaniline, 3-chloro-4-methylaniline, 4-chloro-2-methylaniline, and 5-chloro-2-methylaniline) were determined by CE with amperometric detection after microextraction. Several factors that affect separation, detection, and extraction efficiency were investigated. Under the optimum conditions, eight aniline compounds could be well separated from other components coexisting in water samples within 25 min, exhibiting a linear calibration over three orders of magnitude (r > 0.998); the obtained enrichment factors were between 51 and 239, and the LODs were in the range of 0.01-0.1 ng/mL. The proposed method has been applied for the analyses of real environmental water and sewage samples with relative recoveries in the range of 83-108%.

Thirty years of capillary electrophoresis in food analysis laboratories: potential applications

CE has generated considerable interest in the research community since instruments were introduced by different trading companies in the 1990s. Nowadays, CE is popular due to its simplicity, speed, highly efficient separations and minimal solvent and reagent consumption; it can also be included as a useful technique in the nanotechnology field and it covers a wide range of specific applications in different fields (chemical, pharmaceutical, genetic, clinical, food and environmental). CE has been very well evaluated in research laboratories for several years, and different new approaches to improve sensitivity (one of the main drawbacks of CE) and robustness have been proposed. However, this technique is still not well accepted in routine laboratories for food analysis. Researching in data bases, it is easy to find several electrophoretic methods to determine different groups of analytes and sometimes they are compared in terms of sensitivity, selectivity, precision and applicability with other separation techniques. Although these papers frequently prove the potential of this methodology in spiked samples, it is not common to find a discussion of the well-known complexity of the matrices to extract analytes from the sample and/or to study the interferences in the target analytes. Summarizing, the majority of CE scientific papers focus primarily on the effects upon the separation of the analytes while ignoring their behavior if these analytes are presented in real samples.

Hollow fiber liquid-phase microextraction as clean-up step for the determination of organophosphorus pesticides residues in fish tissue by gas chromatography coupled with mass spectrometry

Hollow fiber liquid-phase microextraction (HF-LPME) technique was used as a clean-up procedure for the determination of organophosphorus pesticides (OPPs) in fish tissue. In this study, eight OPPs were first extracted with acetone from fish sample, the organic extract after rotatory evaporation was then redissolved with water-methanol (95:5, v/v) solution, followed by polyvinylidene difluoride (PVDF) HF-LPME. Experimental HF-LPME and other sample preparation conditions were carefully investigated and optimized. Under the optimum conditions, good linearity were observed in the range of 20-500 ng/g, limits of detections (LODs) were in the range of 2.1-4.5 ng/g. The repeatability and recovery of the method also showed satisfactory results. Compared with traditional sample preparation method for the determination of OPPs in fish tissue, the method developed in this study eliminated the solid phase extraction (SPE) step, simplified the sample preparation procedure and lowered the cost of analysis.