Capillary electrophoresis for the analysis of drugs of abuse in biological specimens of forensic interest

Determination of multiple drugs of abuse in human urine using dispersive liquid–liquid microextraction and capillary electrophoresis with PDA detection

A new method was developed for pre-concentration and determination of multiple drugs of abuse in human urine using dispersive liquid–liquid microextraction (DLLME) and capillary electrophoresis (CE) with photodiode array detection. The method was based on the formation of tiny droplets of an organic extractant in the prepared sample solution using water-immiscible organic solvent (chloroform) dissolved in water-miscible organic dispersive solvent (isopropyl alcohol). The organic phase, which extracted eight drugs of abuse from the prepared urine solution, was separated by centrifugation. The sedimented phase was transferred into a small volume CE auto-sampler vial with 10 µL of 1% HCl methanol solution and evaporated to dryness. The residue was reconstituted in lidocaine hydrochloride (internal standard) aqueous solution and introduced by electrokinetic injection into CE. Under the optimum conditions, acceptable linear relationship was observed in the range of 3.0–500 ng/mL with the correlation coefficient (r) of 0.9982–0.9994 for spiked urine samples. The limit of detection (LOD) (S/N = 3) was estimated to be 1.0 ng/mL. A recovery of 75.7%–90.6% was obtained for spiked samples. The mean relative error (MRE) was within ±7.0% and the relative standard deviation (RSD) was less than 6.9%. The proposed DLLME-CE procedure offers an alternative analytical approach for the sensitive detection of drugs of abuse in real urine samples.

Key points

The dispersive liquid-liquid microextraction (DLLME) was involved for the determination of drugs in urine with capillary electrophoresis with photodiode array detection (CE-PDA).

Good linearity, sensitivity, recovery and precision were achieved.

The proposed method was eco-friendly with microliter scale solvent consumption.

Recent biopharmaceutical applications of capillary electrophoresis methods on recombinant DNA technology-based products

Biopharmaceuticals (recombinant technology-based products, vaccines, whole blood and blood components, gene therapy, cells, tissues, etc.,) are described as biological medical products produced from various living sources such as human, microbial, animal, and so on by manufacturing, extraction, or semi-synthesis. They are complex molecules having high molecular weights. For their safety and efficacy, their structural, clinical, physicochemical, and chemical features must be carefully controlled, and they must be well characterized by analytical techniques before the approval of the final product. Capillary electrophoresis (CE) having versatile modes can provide valuable safety and efficacy information, such as amino acid sequence, size variants (low and high molecular weight variants), charged variants (acidic and basic impurities), aggregates, N-linked glycosylation, and O-linked glycosylation. There are numerous applications of CE in the literature. In this review, the most significant and recent studies on the analysis of recombinant DNA technology-based products using different CE modes in the last ten years have been overviewed. It was seen that the researches mostly focus on the analysis of mAbs and IgG. In addition, in recent years, researchers have started to prefer CE combined mass spectrometry (MS) techniques to provide a more detailed characterization for protein and peptide fragments.

Potentiality of miniaturized techniques for the analysis of drugs of abuse

Capillary electromigration (CE) and liquid chromatographic techniques (CLC/nano-LC) are miniaturized techniques offering distinct advantages over conventional ones in the field of separation science. Among these, high efficiency, high chromatographic resolution, and use of minute volumes of both mobile phase and sample volumes are the most important. CE and CLC/nano-LC have been applied to the analysis of many compounds including peptides, proteins, drugs, enantiomers, ions, etc. Over the years, the methods described here have also been used for the analysis of compounds of clinical, forensic, and toxicological interest. In this review article, the main features of the mentioned techniques are summarized. Their potentiality for the analysis of drugs of abuse are discussed. Some selected applications in this field in the period of 2015-present are also reported.

Derivatisation for separation and detection in capillary electrophoresis (2015-2017)

Derivatisation is an integrated part of many analytical workflows to enable separation and detection of the analytes. In CE, derivatisation is adapted in the four modes of pre-capillary, in-line, in-capillary, and post-capillary derivatisation. In this review, we discuss the progress in derivatisation from February 2015 to May 2017 from multiple points of view including sections about the derivatisation modes, derivatisation to improve the analyte separation and analyte detection. The advancements in derivatisation procedures, novel reagents, and applications are covered. A table summarising the 46 reviewed articles with information about analyte, sample, derivatisation route, CE method and method sensitivity is provided.

Preconcentration of codeine in pharmaceutical and human urine samples by multi-walled carbon nanotubes and its spectrophotometric determination

A rapid and efficient solid phase extraction method was established for the preconcentration of codeine prior to its simple determination by spectrophotometry. The extraction process is based on the multi-walled carbon nanotubes (CNTs) containing –COOH functional groups. These CNTs showed a great affinity for the low quantities of codeine in certain condition. Various extraction factors including buffer type, concentration and its pH, ionic buffer, incubation time, and eluent were optimized to achieve high sensitivity. The calibration graph was linear in the codeine concentration range of 0.001–4 mg·L−1, with a detection limit (3s) of 0.4 μg·L−1. The relative standard deviation (RSD %) for the repetitive determination of 0.01, 0.5, and 2 mg·L−1 codeine (n = 5) were 1.56%, 2.01%, and 1.63%, respectively. Furthermore, comparison with other reported methods showed that the presented method has suitable characteristics. Finally the method was successfully used to accurately determine codeine in pharmaceutical and human urine samples.

Capillary electrophoresis combined in-line with solid-phase extraction using magnetic particles as new adsorbents for the determination of drugs of abuse in human urine

A simple approach is presented based on the in-line coupling between magnetic particles-based SPE and CE. Silica-coated iron oxide particles functionalized with C18 were successfully synthesized and used as a reverse-phase sorbent for in-line SPE-CE. Magnets were used to locally immobilize these sorbents inside the capillary. Four drugs of abuse were preconcentrated and determined in urine samples using the developed method with a simple pretreatment procedure based on LLE. Several parameters affecting the preconcentration were evaluated. The obtained results show that this strategy enhanced detection sensitivity in the range of 125-700-fold compared with CE without preconcentration. The developed method provides LODs (S/N = 3) for standard samples in the range of 0.5-20 ng/mL with satisfactory analytical precision, in both intraday and day-to-day experiments (RSDs <20%). The LODs (S/N = 3) reached for urine samples were in the range of 20-50 ng/mL. Relative recoveries greater than 75.9% were obtained. The established method has been applied to the analysis of drugs of abuse in urine samples from drug abusers.

Molecularly imprinted polymers on multi-walled carbon nanotubes as an efficient absorbent for preconcentration of morphine and its chemiluminometric determination

A simple and selective method was described for the determination of morphine based on its preconcentration by molecularly imprinted polymers on multi-walled carbon nanotubes prior to its chemiluminometric recognition.

Silane modified magnetic nanoparticles as a novel adsorbent for determination of morphine at trace levels in human hair samples by high-performance liquid chromatography with diode array detection

In this paper we report a novel, sensitive, and rapid method of magnetic solid phase extraction based on surface modified magnetic nanoparticles as a novel nano sorbent for HPLC determination of morphine with diode array detection in human hair samples. Factors affecting the extraction efficiency of the proposed method, including the sample pH, quantity of magnetic nanoparticles, sample volume, desorption solvent type and its volume, and extraction time were investigated and optimized. Under the optimized experimental conditions, a good linearity was observed in the range of 1-800 µgL(-1) for the morphine, with a correlation coefficient (R (2)) of 0.990. The pre-concentration factor of 208.69 was achieved in this method. The detection limit of the method was 0.1 μgL(-1) based on S/N = 3 and good reproducibility with a relative standard deviations lower than (n = 5) 2.59 %. The proposed method has been successfully applied to the analysis of trace amounts of morphine in human hair samples with satisfactory results. This method can be applied in medical toxicology research and forensic medical centers.

Electromigrative separation techniques in forensic science: combining selectivity, sensitivity, and robustness

In this review we introduce the advantages and limitations of electromigrative separation techniques in forensic toxicology. We thus present a summary of illustrative studies and our own experience in the field together with established methods from the German Federal Criminal Police Office rather than a complete survey. We focus on the analytical aspects of analytes' physicochemical characteristics (e.g. polarity, stereoisomers) and analytical challenges including matrix tolerance, separation from compounds present in large excess, sample volumes, and orthogonality. For these aspects we want to reveal the specific advantages over more traditional methods. Both detailed studies and profiling and screening studies are taken into account. Care was taken to nearly exclusively document well-validated methods outstanding for the analytical challenge discussed. Special attention was paid to aspects exclusive to electromigrative separation techniques, including the use of the mobility axis, the potential for on-site instrumentation, and the capillary format for immunoassays. The review concludes with an introductory guide to method development for different separation modes, presenting typical buffer systems as starting points for different analyte classes. The objective of this review is to provide an orientation for users in separation science considering using capillary electrophoresis in their laboratory in the future.

Recent trends in analytical methods and separation techniques for drugs of abuse in hair

Hair analysis of drugs of abuse has been a subject of growing interest from a clinical, social and forensic perspective for years because of the broad time detection window after intake in comparison to urine and blood analysis. Over the last few years, hair analysis has gained increasing attention and recognition for the retrospective investigation of drug abuse in a wide variety of contexts, shown by the large number of applications developed. This review aims to provide an overview of the state of the art and the latest trends used in the literature from 2005 to the present in the analysis of drugs of abuse in hair, with a special focus on separation analytical techniques and their hyphenation with mass spectrometry detection. The most recently introduced sample preparation techniques are also addressed in this paper. The main strengths and weaknesses of all of these approaches are critically discussed by means of relevant applications.

Cytochrome P450 2D6 based electrochemical sensor for the determination of codeine

Considering the enzymatic activity of the cytochrome P450 2D6 on substrates such as codeine, the current paper includes the development of an enzymatic biosensor for detection of this drug. Home-made screen-printed electrodes were used as electrochemical transducers of the biosensor, in which the enzyme was covalently attached to the carbon surface of the working electrode, this type of modification being the most suitable for the immobilization of the biological element. Chronoamperometric measurements were carried out under optimum conditions of pH and working potential, pH 7 and +200 mV vs. screen-printed Ag/AgCl electrode, giving a reduction signal related to the concentration of codeine in solution. Consecutive additions of a solution of codeine were performed to obtain calibration curves in order to validate the electrochemical method in terms of precision and calculate its capability of detection. These biosensors were used for the determination of codeine in urine and commercial pharmaceutical samples.

The application of capillary electrophoresis techniques in toxicological analysis

Capillary electrophoresis (CE) comprises a group of techniques used to separate chemical mixtures. Analytical separation is based on different electrophoretic mobilities, thereby allowing qualitative and quantitative evaluations to be made. The application of CE in medical science, especially in toxicological studies, is developing rapidly because of the short time required for analysis and its high sensitivity, selectivity and ability to determine substances of an acidic, alkaline and neutral character. This review focuses on the possibility of applying CE in toxicological analysis. Advances in different CE analyses and detection techniques connected with this method are described.

Screen-printed biosensor based on the inhibition of the acetylcholinesterase activity for the determination of codeine

The current paper presents the chronoamperometric determination of codeine using screen-printed carbon electrodes that incorporate tetrathiafulvalene in the matrix of the working electrode, as mediator, and cross-linked acetylcholinesterase. Applying a potential of +250 mV, a 1mM solution of acetylthiocholine in electrolyte solution pH 7 gives an oxidation signal due to the dimerization of its metabolite after the reaction with the enzyme. This electrochemical signal is decreased by consecutive additions of a solution of codeine, which allows the performance of curves of calibration for the validation of this electrochemical method, giving a reproducibility of 3.31% (n=6) and a capability of detection of 20 µM. This type of inhibition has been studied by means of a Lineweaver-Burk plot. Additionally, the developed biosensor was used for the determination of the quantity of codeine in pharmaceutical commercial tablets and urine samples.

Contemporary sample stacking in analytical electrophoresis

Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).

Dispersive liquid-liquid microextraction prior to field-amplified sample injection for the sensitive analysis of 3,4-methylenedioxymethamphetamine, phencyclidine and lysergic acid diethylamide by capillary electrophoresis in human urine

A novel capillary zone electrophoresis (CZE) with ultraviolet detection method has been developed and validated for the analysis of 3,4-methylenedioxymethamphetamine (MDMA), lysergic acid diethylamide (LSD) and phencyclidine (PCP) in human urine. The separation of these three analytes has been achieved in less than 8 min in a 72-cm effective length capillary with 50-μm internal diameter. 100 mM NaH(2)PO(4)/Na(2)HPO(4), pH 6.0 has been employed as running buffer, and the separation has been carried out at temperature and voltage of 20°C, and 25kV, respectively. The three drugs have been detected at 205 nm. Field amplified sample injection (FASI) has been employed for on-line sample preconcentration. FASI basically consists in a mismatch between the electric conductivity of the sample and that of the running buffer and it is achieved by electrokinetically injecting the sample diluted in a solvent of lower conductivity than that of the carrier electrolyte. Ultrapure water resulted to be the better sample solvent to reach the greatest enhancement factor. Injection voltage and time have been optimized to 5 kV and 20s, respectively. The irreproducibility associated to electrokinetic injection has been correcting by using tetracaine as internal standard. Dispersive liquid-liquid microextraction (DLLME) has been employed as sample treatment using experimental design and response surface methodology for the optimization of critical variables. Linear responses were found for MDMA, PCP and LSD in presence of urine matrix between 10.0 and 100 ng/mL approximately, and LODs of 1.00, 4.50, and 4.40 ng/mL were calculated for MDMA, PCP and LSD, respectively. The method has been successfully applied to the analysis of the three drugs of interest in human urine with satisfactory recovery percentages.