Electrospun nanofiber-based solid-phase extraction

Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review

This review examines strategies to enhance the mechanical properties of chitosan/polyvinyl alcohol (PVA) electrospun nanofibers, recognized for their biomedical and industrial applications. It begins by outlining the fundamental properties of chitosan and PVA, highlighting their compatibility and mechanical characteristics. The electrospinning process is discussed, focusing on how various parameters and post-treatment methods influence fiber formation and performance. Key strategies for improvement are analyzed, including material modifications through blending and structural modifications like fiber orientation and multilayer constructions, and surface modifications such as coating and functionalization. The review also covers advanced characterization methods to evaluate mechanical properties and provides a comparative analysis of different enhancement approaches. Applications in biomedical and industrial contexts are explored, showcasing the versatility and innovation potential of these nanofibers. Finally, current challenges are addressed, and future research directions are proposed to overcome these obstacles and further enhance the mechanical properties of chitosan/PVA electrospun nanofibers, guiding their development for practical applications.

High throughput detection of veterinary drug residues in chicken and eggs

Co-extraction of multiple types of target substances is the key to achieve high throughput detection. In this work, PDA@MOF-808/PAN NFsM was prepared by co-modified polyacrylonitrile nanofiber membrane (PAN NFsM) with polydopamine (PDA) and metal-organic framework-808 (MOF-808), and its potential as a solid-phase extraction (SPE) adsorbent was investigated by using the most typical nine veterinary drug residues in eggs and chicken as model target substances. The results show that PDA@MOF-808/PAN NFsM could effectively co-extract all the target substances (adsorption efficiency ranged from 81.46 % to 96.78 %), and had good capability of sample matrix purification (matrix effect was lower than -15.26 %), so a new SPE method has been established. Combined with UPLC-MS/MS, the detection limits were 0.3 to 3.1 μg/kg, the recoveries were between 71.02 % and 106.48 %, and the relative standard deviations were lower than 12.03 %, indicating that the method has considerable good sensitivity, accuracy and precision.

Analysis and remediation of phthalates in aquatic matrices: current perspectives

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.

Advanced nanofibrous sorbents for the extraction of pollutants from river water and protein-containing matrices

The extraction efficiencies of thirty types of fibers produced by meltblown, alternating current electrospinning, and meltblown-co-electrospinning technologies were tested as advanced sorbents for on-line solid-phase extraction in a high-performance liquid chromatography system have been tested and compared with a commercial C18 sorbent. The properties of each fiber, which were often depended on the production process, and their applicability were demonstrated with the extraction of the model analytes nitrophenols and chlorophenols from various matrices including river water and to purify complex matrix human serum and bovine serum albumin from macromolecular ballast. Polycaprolactone fibers outperformed other polymers and were selected for subsequent modifications including (i) incorporation of hybrid carbon nanoparticles, i.e., graphene, activated carbon, and carbon black into the polymer prior to fiber fabrication, and (ii) surface modification by dip coating with polyhydroxy modifiers including graphene oxide, tannin, dopamine, hesperidin, and heparin. These novel fibrous sorbents were comparable to commercial C18 sorbent and provided excellent analyte recoveries of 70-112% even from the protein-containing matrices.

Determination of Aflatoxins in Milk by PS-MWCNT/OH Composite Nanofibers Solid-Phase Extraction Coupled with HPLC-FLD

In this work, a sensitive analytical method based on packed-nanofiber solid-phase extraction (PFSPE), after derivatization with trichloroacetic acid and high-performance liquid chromatography with a fluorescence detector (HPLC-FLD), has been established for the determination of aflatoxins (AFs) in milk. Polystyrene polymeric multi-walled carbon nanotube (PS-MWCNT/OH) composite nanofibers were fabricated by electrospinning and used to prepare homemade extraction columns. The extraction efficiency of the HPLC-FLD analysis method was sufficiently investigated and validated. After the implementation of optimal conditions, all of the analytes were separated efficiently and the components of the milk matrix did not disturb the determination. The obtained linear ranges of the calibration curves were 0.2-20 ng/mL for AFTB1 and AFTG2, 0.1-10 ng/mL for AFTB2, and 0.4-40 ng/mL for AFTG1. The recoveries ranged between 80.22% and 96.21%. The relative standard deviations (RSDs) for the intra-day and inter-day results ranged from 2.81-6.43% to 3.42-7.75%, respectively. Generally, 11 mg of sorbent and 200 μL of elution solvent were used to directly extract all of the AFs from the milk matrix. Reported herein is the first utilization of PS-MWCNT/OH-PFSPE HPLC-FLD to simultaneously analyze the occurrence of aflatoxins in milk.

Fabrication of porous cobalt oxide/carbon nanopolks on electrospun hollow carbon nanofibers for microextraction by packed sorbent of parabens from human blood

In this work, electrospinning and hydrothermal methods were employed to synthesize an innovative 3D Co₃O₄/C@HCNFs nanocomposite as the sorbent. It was then used in a packed sorbent microextraction system for parabens analysis in human blood samples, followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The coaxial electrospun core-shell nanofibers mat was stabilized and carbonized to produce the hollow carbon nanofibers (HCNFs) substrate. A coating of cobalt carbonate hydroxide nanopolks was then grown on the HCNFs through hydrothermal synthesis. Ultimately, some of the nanopolks were converted to ZIF-67 by pouring the mat into a warm solution of 2-methyl imidazole and heat-treated into porous Co₃O₄/C afterward. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses were used to characterize the produced nanocomposite. The effective parameters of the adsorption and desorption steps were optimized by a central composite design. The figures of merit were evaluated under optimal conditions. The linear range of parabens was obtained between 0.5-500.0 ng ml^-1 with R² ≥ 0.9980. The detection limits of the method were between 0.1 and 0.2 ng ml^-1. The intra-day and inter-day precisions were less than 4.3%. Relative recoveries between 92.0% and 109.3% were achieved. The findings demonstrated the eligible performance of the method.

Determination of aflatoxin B1 by novel nanofiber-packed solid-phase extraction coupled with a high performance liquid chromatography-fluorescence detector

A novel analytical proposal based on nanofiber-packed solid-phase extraction coupled with high performance liquid chromatography-fluorescence detector (HPLC-FLD) has been successfully developed for determining aflatoxin B1 (AFB1) in foods. Four types of nanofibers, including polystyrene (PS) nanofibers, polypyrrole (PPY) nanofibers, polystyrene-acrylic resin (PS-AR) nanofibers, and polystyrene-polyvinyl pyrrolidone (PS-PVP) nanofibers, were fabricated by electrospinning and utilized to prepare a home-made extraction device. In this study, the factors of different fibers, namely, fiber dosage, pH of extraction solution, type of salt ion, concentration of salt ion, and volume of the eluent were optimized. Under optimized conditions, the method showed good linearity in the range of 0.1-40 ng mL^-1 with a correlation coefficient greater than 0.999 and good inter-day accuracy (90.8-112.7% recovery) and precision (1.8-3.6% intra-day RSDs, 2.6% inter-day RSD), and the limit of detection (LOD) was 0.05 ng mL^-1. Due to its cost-effective, time-saving, environmentally friendly, and simple performance, it has the potential to be utilized to determine aflatoxins in complicated matrices.

Simultaneous Determination of Nine Quinolones in Pure Milk Using PFSPE-HPLC-MS/MS with PS-PAN Nanofibers as a Sorbent

In this study, a packed-fiber solid-phase extraction (PFSPE)-based method was developed to simultaneously detect nine quinolones, including enrofloxacin (ENR), ciprofloxacin (CIP), ofloxacin (OFL), pefloxacin (PEF), lomefloxacin (LOM), norfloxacin (NOR), sarafloxacin (SAR), danofloxacin (DAN), and difloxacin (DIF), in pure milk, using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). Polystyrene (PS) and polyacrylonitrile (PAN) were combined to form PS-PAN composite nanofibers through electrospinning. The nanofibers were used to prepare the home-made extraction columns, and the process was optimized and validated using blank pure milk. The analytical method showed high accuracy, and the recoveries were 88.68–97.63%. Intra-day and inter-day relative standard deviations were in the ranges of 1.11–6.77% and 2.26–7.17%, respectively. In addition, the developed method showed good linearity (R² ≥ 0.995) and low method quantification limits for the nine quinolones (between 1.0–100 ng/mL) for all samples studied. The nine quinolones in the complex matrix were directly extracted using 4.0 mg of PS-PAN composite nanofibers as a sorbent and completely eluted in 100 μL elution solvent. Therefore, the developed PFSPE-HPLC-MS/MS is a sensitive and cost-effective technique that can effectively detect and control nine quinolones in dairy products.

The role of pKa, log P of analytes, and protein matrix in solid-phase extraction using native and coated nanofibrous and microfibrous polymers prepared via meltblowing and combined meltblowing/electrospinning technologies

Effect of physicochemical properties including dissociation constant (pKa) and partition coefficient (log P) of the compounds on their extraction efficiency in sample preparation using fibrous polymer sorbents has been demonstrated. Poly-ε-caprolactone as meltblown/electrospun composite fibers, and polypropylene, polyethylene, poly(3-hydroxybutyrate), poly(lactic acid), and polyamide 6 in the meltblown fiber format were used as sorbents in solid-phase extraction. In addition, the polycaprolactone fibers were coated with dopamine, dopamine combined with heparin, and tannin, respectively, to modify their extraction properties. These fibers that were not yet used for extractions and the unique combination of sorbents and analytes significantly extends the scope of nanofibrous extraction. The extraction efficiency was determined using model pharmaceuticals including acetylsalicylic acid, moxonidine, metoprolol, propranolol, propafenone, diltiazem, atorvastatin, and amiodarone. These model compounds displayed the widest differences in both pKa and log P values. The extraction efficiency of some of the fibers reached 96.64%. Coating of polycaprolactone fibers with dopamine significantly improved extraction efficiency of slightly retained metoprolol while moxonidine was not retained on any sorbent. The fibrous sorbents were also tested for extraction of pharmaceuticals in bovine serum albumin and human serum, respectively, to demonstrate their capability to extract them from a complex protein-containing matrix. The clean-up efficiency of our fibers was compared with that of a commercial restricted access media (RAM) C-18 alkyl-diol silica column. Our technique is in accordance with the requirements of modern sample preparation techniques.

[Determination of tetracycline and fluoroquinolone residues in fish by polydopamine nanofiber mat based solid phase extraction combined with ultra performance liquid chromatography-tandem mass spectrometry]

Tetracyclines and fluoroquinolones are common antibacterial drugs used in aquaculture, and their residues may pose a risk to human health. The low concentration of drug residues and complex matrixes such as fats and proteins in aquatic products necessitate the urgent development of efficient sample pretreatment methods. Solid phase extraction (SPE) is the most common sample pretreatment method, in which the core is an adsorbent. Compared with traditional SPE adsorbents, nanofiber mat (NFsM) has more interaction sites because of their large specific surface area. Furthermore, NFsMs modified with specific functional groups can significantly improve the extraction efficiency of tetracyclines and fluoroquinolones. Polydopamine (PDA) is spontaneously synthesized by the oxidative self-polymerization of dopamine-hydrochloride in alkaline solutions (pH>7.5). Because of its rich amino and catechol groups, PDA can form π-π stacking, electrostatic attraction, hydrophobic interaction, and hydrogen bonding interactions with target molecules. By exploiting the above advantages, polystyrene (PS) NFsM, as a template, was prepared by the electrostatic spinning method, and PDA-PS NFsM was obtained by functional modification of PDA through self-polymerization. Fourier transform infrared spectroscopy (FT-IR) and field-emission scanning electron microscopy (FESEM) were used to characterize the synthesized PS NFsM and PDA-PS NFsM. It was proved that PDA was successfully modified on the PS NFsM, with the SEM images revealing a rough outer core shell structure and an inner honeycomb structure. Subsequently, the handmade SPE column with PDA-PS NFsM was completed. A novel and efficient screening analytical method based on PDA-PS NFsM for the simultaneous determination of three tetracyclines (tetracycline (TET), chlortetracycline (CTC), and oxytetracycline (OTC)) and three fluoroquinolones (enrofloxacin (ENR), ciprofloxacin (CIP), and norfloxacin (NOR)) in fish by ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was established. The SPE procedure was optimized to develop an efficient method for sample preparation. Evaluate parameters including the amount of NFsM usage, ionic strength, flow rate of the sample solution, composition of eluent, and breakthrough volume were investigated. Only (20±0.1) mg of PDA-PS NFsM was sufficient to completely adsorb the targets, and the analytes retained on NFsM could be eluted by 1 mL of formic acid-ethyl acetate (containing 20% methanol) (1∶99, v/v). The residues were redissolved in 0.1 mL 10% methanol aqueous solution containing 0.2% formic acid. In addition, no adjustment of the pH and ionic strength of the sample solutions was required, and the breakthrough volume was 50 mL. The limits of detection (LODs) and limits of quantification (LOQs) of the six target compounds were measured at 3 times and 10 times the signal-to-noise ratio (S/N), respectively. The LODs and LOQs were 0.3-1.5 μg/kg and 1.0-5.0 μg/kg, respectively. The linear ranges of the six target compounds were LOQ-1000 μg/kg, and the coefficient of determination (R²) was greater than 0.999. To evaluate the accuracy and precision, blank spiked samples at three levels (low, medium, and high) were prepared for the recovery experiments, and each level with six parallel samples (n=6). The recoveries ranged from 94.37% to 102.82%, with intra-day and inter-day relative standard deviations of 2.38% to 8.06% and 4.10% to 9.10%, respectively. To evaluate the purification capacity of PDA-PS NFsM, the matrix effects before and after SPE were calculated and compared. Matrix effects before SPE were -12.98% to -38.68%. After the completion of SPEbased on PDA-PS NFsM, the matrix effect of each target analyte was significantly reduced to -2.15% to -7.36%, which proved the significant matrix removal capacity of PDA-PS NFsM. Finally, the practicality of this method was evaluated by using it to analyze real samples. This SPE method based on PDA-PS NFsM is efficient, practical, and environmentally friendly, and it has great potential for use in the routine monitoring of drug residues in fish.

Polyethylene Terephthalate Nanofiber Sheet as the Novel Extraction Medium for the Determination of Phthalates in Water Samples

A novel extraction medium was developed by packing polyethylene terephthalate (PET) nanofiber sheet having a diameter of 500 nm into a stainless-steel capillary of 0.8 mm inner diameter. The nanofiber was prepared by a carbon dioxide (CO₂) laser supersonic multi-drawing method, which has a significantly higher surface area than the original PET fiber. A nanofiber sheet was prepared by winding the nanofibers. Extraction of phthalates in water samples by a PET nanofiber-packed extraction capillary was investigated using a conventional high-performance liquid chromatography (HPLC). Water samples were introduced into the extraction capillary with a low pressure. After extracting the water sample, the extraction capillary was directly connected to a six-port valve of HPLC with a PEEK nut, and the extracted analytes were desorbed, followed by injection to an HPLC system using a small amount of organic solvent. In this manuscript, the fundamental performance of the nanofiber sheet-packed extraction capillary for the extraction of organic compounds in water samples is quantitatively evaluated using a conventional HPLC system.

Materials for Solid-Phase Extraction of Organic Compounds

This review provides an overview of the most recent developments involving materials for solid-phase extraction applied to determine organic contaminants. It mainly concerns polymer-based sorbents that include high-capacity, as well as selective sorbents, inorganic-based sorbents that include those prepared using sol-gel technology along with structured porous materials based on inorganic species, and carbon nanomaterials, such as graphene and carbon nanotubes. Different types of magnetic nanoparticles coated with these materials are also reviewed. Such materials, together with their main morphological and chemical features, are described, as are some representative examples of their application as solid-phase extraction materials to extract organic compounds from different types of samples, including environmental water, biological fluids, and food.

Electrospun polymer composite nanofiber-based in-syringe solid phase extraction in tandem with dispersive liquid-liquid microextraction coupled with HPLC-FD for determination of aflatoxins in soybean

A fast method based on in-syringe solid phase extraction combined with dispersive liquid-liquid microextraction was developed for extraction of aflatoxins prior to HPLC-FD. Electrospun polyurethane nanofibers doped with graphene oxide were collected on a thin metal net sheet without using a binder, placed into a filter holder between filter papers on a syringe tip and used as an efficient adsorbent for the first time. The major parameters affecting whole extraction efficiency were investigated and optimized. Under the optimum conditions, the limits of detection and the limits of quantification were in the range of 0.09-0.15 and 0.3-0.5 µg kg-1, respectively. The linear dynamic range was 0.3-1000 µg kg-1 with determination coefficients of 0.9946-0.9965. The inter- and intra-day precisions were lower than 4.3 and 7.2%, respectively. The method was successfully applied for the determination of aflatoxins B1, B2, G1, and G2 in soybeans and satisfactory relative recoveries of 76-101% were achieved.

Novel nanofibers mat as an efficient, fast and reusable adsorbent for solid phase extraction of non-steroidal anti-inflammatory drugs in environmental water

Core-shell polyaniline/polyacrylonitrile nanofibers mat (PANI/Pan NFsM) was prepared for extraction of hydrophilic non-steroidal anti-inflammatory drugs (NSAIDs) in environmental water. Superior adsorption and desorption performance of PANI/Pan NFsM was confirmed by both static and dynamic adsorption/desorption experiments. These properties proved PANI/Pan NFsM was a potentially efficient and fast solid phase extraction (SPE) adsorbent for NSAIDs. Under the optimized conditions, only 3 mg of PANI/Pan NFsM could easily extract eight target analytes in 10 mL of water sample without any pre-treatment, and the analytes retained on NFsM could be easily eluted by 500 μL of 1% acetic acid methanol for direct UPLC-MS/MS analysis. In addition, each piece of PANI/Pan NFsM could be reused for at least 20 times without performance decline. Possible adsorption mechanisms were also proposed. Practical feasibility was validated through the actual sample analysis.

Adsorption efficiency enhancing of electrospun polycaprolactone nanofibers towards acidic polar drugs through the incorporation of a composite of graphene oxide nanosheets and Al30 polyoxocations: a comparative study

The main objective of this study focuses on exploration of the feasibility of Al30 polyoxocations for preparation of a novel sorbent material for a solid-phase extraction (SPE) method by selective adsorption and extraction of a class of compounds considering the type of interactions involved in the adsorption process. Accordingly, first Al30 polyoxocations were synthesized and their composite was prepared with graphene oxide (GO) nanosheets as a suitable substrate to be introduced as a SPE sorbent material. Then, the prepared composite was incorporated into polycaprolactone (PCL) nanofibers via electrospinning to present an alternative sorbent for SPE-based on a GO/Al30 nanocomposite (GO/Al30 NC) creating no need for filtering or centrifuging steps. Intercalation of Al30 polyoxocations into the GO layers and the incorporation of GO/Al30 NC into PCL nanofibers was successfully confirmed through FE-SEM, TEM, EDX, XRD, BET, TGA, IR spectroscopy, and zeta potential determination. For investigating the types of probable interactions involved in the adsorption process of different compounds on the proposed sorbents, four statin drugs, cholesterol-lowering agents with various polarity and ionization properties, were selected as model analytes. Factors affecting the extraction efficiency of dispersive SPE and immersed SPE methods using GO/Al30 NC and GO/Al30 NC-PCL nanofibers, respectively, were investigated and optimized. Under optimal conditions, acceptable analytical figures of merit were obtained for both SPE methods. A comparison of extraction efficiencies of the target drugs by the two proposed sorbents, as well as GO nanosheets and PCL nanofibers, was accomplished to study the types of interactions as well as the adsorption mechanism. The results revealed that GO/Al30 NC, having many polar and anion exchange sites caused by Al30 polyoxocations, is a good selective sorbent for acidic polar compounds which their extraction by nonpolar sorbents is not desirable. Additionally, GO/Al30 NC-PCL nanofibers exhibited extraction capability for a wide range of compounds from acidic polar to nonpolar and nonionizable ones.

Nanofibers mat-based solid-phase extraction method for the pretreatment of urine samples and its application in the primary study on the disposition of nonylphenol after long-term low-level exposure in rats

A method was established for the analysis of nonylphenol (NP) in rat urine samples based on a solid-phase extraction (SPE) procedure with an amino functionalized polyacrylonitrile nanofibers mat (NH₂-PAN NF_SM) as sorbent coupled with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The calibration curves prepared in three different days showed good linearity over a wide range of NP concentrations from 0.1 to 100.0ng/mL. It was remarkable that the proposed NH₂-PAN NFsM based SPE method showed superior extraction efficiency with the consumption of only 4mg of sorbent and 500μL of eluent. The eluent without any further concentration was directly analyzed by HPLC-MS/MS. As a result, a simple and effective sample preparation was achieved. In addition, the notable lower detection limit (LOD) of 0.03ng/mL revealed the excellent sensitivity of the proposed method in comparison with that in literatures. The recoveries ranged from 85.0% to 114.8% with the relative standard deviations (RSDs) ranging from 7.5% to 13.7%, which were better than or comparable to those from the published methods, suggesting high accuracy of the proposed method. The proposed method was applied in primary study on the disposition of nonylphenol after long-term low-level exposure in rats, providing information for health risk assessment on the real scenarios of NP exposure. NH₂-PAN NFsM shows great potential as a novel SPE sorbent for the analysis of biological samples.

Controllable Preparation of Ultrathin Sandwich-Like Membrane with Porous Organic Framework and Graphene Oxide for Molecular Filtration

Porous organic frameworks (POFs) based membranes have potential applications in molecular filtration, despite the lack of a corresponding study. This study reports an interesting strategy to get processable POFs dispersion and a novel ultrathin sandwich-like membrane design. It was accidentally found that the hydrophobic N-rich Schiff based POFs agglomerates could react with lithium-ethylamine and formed stable dispersion in water. By successively filtrating the obtained POFs dispersion and graphene oxide (GO), we successfully prepared ultrathin sandwich-like hybrid membranes with layered structure, which showed significantly improved separation efficiency in molecular filtration of organic dyes. This study may provide a universal way to the preparation of processable POFs and their hybrid membranes with GO.

Preparation of temperature sensitive molecularly imprinted polymer coatings on nickel foam for determination of ofloxacin in Yellow River water by solid-phase microextraction

A new ofloxacin-templated MIP on nickel foam was investigated for the determination of antibiotics in river water.

Nylon 6 electrospun nanofibers mat as effective sorbent for the removal of estrogens: kinetic and thermodynamic studies

Nylon 6 electrospun nanofibers mat was prepared via electrospinning for the removal of three estrogens, namely, diethylstilbestrol (DES), dienestrol (DS), and hexestrol (HEX) from aqueous solution. Static adsorption as well as the dynamic adsorption was evaluated by means of batch and dynamic disk flow mode, respectively. The kinetic study indicated that the adsorption of the target compounds could be well fitted by the pseudo-second-order equation, suggesting the intra-particle/membrane diffusion process as the rate-limiting step of the adsorption process. The adsorption equilibrium data were all fitted well to the Freundlich isotherm models, with a maximum adsorption capacity values in the range of 97.71 to 208.95 mg/g, which can be compared to or moderately higher than other sorbents published in the literatures. The dynamic disk mode studies indicated that the mean removal yields of three model estrogens were over 95% with a notable smaller amount of adsorbent (4 mg). Thermodynamic study revealed that the adsorption process was exothermic and spontaneous in nature. Desorption results showed that the adsorption capacity can remain up to 80% after seven times usage. It was suggested that Nylon 6 electrospun nanofibers mat has great potential as a novel effective sorbent material for estrogens removal.

In-syringe dispersive solid phase extraction: a novel format for electrospun fiber based microextraction

A rapid and high-throughput in-syringe dispersive solid phase extraction (dSPE) system using electrospun fibers as adsorbents is presented.