Tackling the increasing complexity of therapeutic monoclonal antibodies with mass spectrometry

Characterization of a Monoclonal Antibody by Native and Denaturing Top-Down Mass Spectrometry

Established in recent years as an important approach to unraveling the heterogeneity of intact monoclonal antibodies, native mass spectrometry has been rarely utilized for sequencing these complex biomolecules via tandem mass spectrometry. Typically, top-down mass spectrometry has been performed starting from highly charged precursor ions obtained via electrospray ionization under denaturing conditions (i.e., in the presence of organic solvents and acidic pH). Here we systematically benchmark four distinct ion dissociation methods─namely, higher-energy collisional dissociation, electron transfer dissociation, electron transfer dissociation/higher-energy collisional dissociation, and 213 nm ultraviolet photodissociation─in their capability to characterize a therapeutic monoclonal antibody, trastuzumab, starting from denatured and native-like precursor ions. Interestingly, native top-down mass spectrometry results in higher sequence coverage than the experiments carried out under denaturing conditions, with the exception of ultraviolet photodissociation. Globally, electron transfer dissociation followed by collision-based activation of product ions generates the largest number of backbone cleavages in disulfide protected regions, including the complementarity determining regions, regardless of electrospray ionization conditions. Overall, these findings suggest that native mass spectrometry can certainly be used for the gas-phase sequencing of whole monoclonal antibodies, although the dissociation of denatured precursor ions still returns a few backbone cleavages not identified in native experiments. Finally, a comparison of the fragmentation maps obtained under denaturing and native conditions strongly points toward disulfide bonds as the primary reason behind the largely overlapping dissociation patterns.

Application of affinity capillary electrophoresis for charge heterogeneity profiling of biopharmaceuticals

Charge heterogeneity profiling is important for the quality control (QC) of biopharmaceuticals. Because of the increasing complexity of these therapeutic entities [1], the development of alternative analytical techniques is needed. In this work, flow-through partial-filling affinity capillary electrophoresis (FTPFACE) has been established as a method for the analysis of a mixture of two similar monoclonal antibodies (mAbs). The addition of a specific ligand results in the complexation of one mAb in the co-formulation, thus changing its migration time in the electric field. This allows the characterization of the charged variants of the non-shifted mAb without interferences. Adsorption of proteins to the inner capillary wall has been circumvented by rinsing with guanidine hydrochloride before each injection. The presented FTPFACE approach requires only very small amounts of ligands and provides complete comparability with a standard CZE of a single mAb.

Application of triple quadrupole mass spectrometry for the characterization of antibody-drug conjugates

Antibody–drug conjugates (ADCs) are an inherently heterogeneous class of biotherapeutics, the development of which requires extensive characterization throughout. During the earliest phases of preclinical development, when synthetic routes towards the desired conjugate are being assessed, the main interest lies in the determination of the average drug-to-antibody ratio (DAR) of a given batch as well as information about different conjugation species. There has been a trend in mass spectrometry (MS)–based characterization of ADCs towards the use of high-resolving mass spectrometry for many of these analyses. Considering the high cost for such an instrument, the evaluation of cheaper and more accessible alternatives is highly motivated. We have therefore tested the applicability of a quadrupole mass analyzer for the aforementioned characterizations. Eight ADCs consisting of trastuzumab and varying stoichiometries of Mc-Val-Cit-PABC-monomethyl auristatin E conjugated to native cysteines were synthesized and served as test analytes. The average DAR value and molecular weights (Mw) of all detected chains from the quadrupole mass analyzer showed surprisingly high agreement with results obtained from a time-of-flight (TOF) mass analyzer and hydrophobic interaction chromatography (HIC)–derived values for all investigated ADC batches. Acquired Mw were within 80 ppm of TOF-derived values, and DAR was on average within 0.32 DAR units of HIC-derived values. Quadrupole mass spectrometers therefore represent a viable alternative for the characterization of ADC in early-stage development.

Recent advancements, challenges, and practical considerations in the mass spectrometry-based analytics of protein biotherapeutics: A viewpoint from the biosimilar industry

The extensive analytical characterization of protein biotherapeutics, especially of biosimilars, is a critical part of the product development and registration. High-resolution mass spectrometry became the primary analytical tool used for the structural characterization of biotherapeutics. Its high instrumental sensitivity and methodological versatility made it possible to use this technique to characterize both the primary and higher-order structure of these proteins. However, even by using high-end instrumentation, analysts face several challenges with regard to how to cope with industrial and regulatory requirements, that is, how to obtain accurate and reliable analytical data in a time- and cost-efficient way. New sample preparation approaches, measurement techniques and data evaluation strategies are available to meet those requirements. The practical considerations of these methods are discussed in the present review article focusing on hot topics, such as reliable and efficient sequencing strategies, minimization of artefact formation during sample preparation, quantitative peptide mapping, the potential of multi-attribute methodology, the increasing role of mass spectrometry in higher-order structure characterization and the challenges of MS-based identification of host cell proteins. On the basis of the opportunities in new instrumental techniques, methodological advancements and software-driven data evaluation approaches, for the future one can envision an even wider application area for mass spectrometry in the biopharmaceutical industry.

Qualitative analysis of antibody–drug conjugates (ADCs): an experimental comparison of analytical techniques of cysteine-linked ADCs

Four different cysteine linked antibody-drug conjugates (ADCs) consisting of Trastuzumab-vc-MMAE were analysed with four common analytical techniques with respect to drug-to-antibody ratio (DAR) and molecular weight.

Development and use of specific ELISA methods for quantifying the biological activity of bevacizumab, cetuximab and trastuzumab in stability studies

Bevacizumab (BVZ), cetuximab (CTX) and trastuzumab (TTZ) are monoclonal antibodies (mAbs) used worldwide for the treatment of several widespread kinds of cancer. They are marketed as medicines under their respective tradenames: Avastin(®), Erbitux(®) and Herceptin(®). The aim of this research was to develop in-house specific enzyme-linked immunosorbent assays (ELISA) to assess the long-term stability of these three mabs. These assays assess the biological functionality of the mAbs by quantifying their biological activity. For this purpose, we developed an indirect ELISA procedure whereby the specific antigens against which the mAbs are directed are used as specific "capturing" antibodies on the ELISA plates. We therefore used vascular endothelial growth factor (VEGF) in the ELISA for BVZ; human epidermal growth factor receptor (hEGFR) in the ELISA for CTX and human receptor HER2 (hHER2) in the ELISA for TTZ. After the mAbs had attached to their antigen, we used an anti-human IgG (whole molecule) peroxidase-conjugate and o-phenylenediaminedihydrochloride substrate. The reaction was stopped using sulphuric acid and absorbance was recorded at a wavelength of 450nm. The three ELISA methods were validated in terms of calibration models, range of the assay, limits of detection and quantitation, intra and interday precision and accuracy, and specificity by cross reactions. Forced degradation studies were also conducted on the medicines, providing useful information. Finally, the proposed ELISA were successfully used in a long-term stability study to quantify the remaining biological activity in medicines that had been opened and then stored under two different storage conditions, i.e. refrigerated at 4°C and frozen at -20°C. Results indicated that BVZ (Avastin(®)) is the most stable of the three in terms of its biological functionality.

Parallel development of chromatographic and mass-spectrometric methods for quantitative analysis of glycation on an IgG1 monoclonal antibody

Monitoring post-translational modifications (PTMs) in biotherapeutics is of paramount importance. In pharmaceutical industry, chromatography with optical detection is the standard choice of quantitation of product related impurities; and mass spectrometry is used only for characterization. Parallel development of a boronate affinity chromatographic (BAC) and a mass spectrometric methods for quantitative measurement of glycation on a monoclonal antibody (mAb) shed light on the importance of certain characteristics of the individual methods. Non-specific interactions in BAC has to be suppressed with the so-called shielding reagent. We have found that excessive amount of shielding reagents in the chromatographic solvents may cause significant underestimation of glycation. Although contamination of the retained peak with the non-glycated isoforms in BAC is unavoidable, our work shows that it can be characterized and quantitated by mass spectrometry. It has been demonstrated that glycation can be measured by mass spectrometry at the intact protein level with an LOQ value of 3.0% and error bar of ±0.5%. The BAC and MS methods have been found to provide equivalent results. These methods have not been compared from these points of view before.

Study and ICH validation of a reverse-phase liquid chromatographic method for the quantification of the intact monoclonal antibody cetuximab

Cetuximab (CTX) is a potent chimeric mouse/human monoclonal antibody (mAb) approved worldwide for treatment of metastatic colorectal cancer. Among the various biological and physical analyses performed for full study on this biopharmaceutic, the determination of the concentration preparations throughout manufacturing and subsequent handling in hospital is particularly relevant. In the present work, the study and validation of a method for quantifying intact CTX by reverse-phase high-performance liquid chromatography with diode array detection ((RP)HPLC/DAD) is presented. With that end, we checked the performance of a chromatographic method for quantifying CTX and conducted a study to validate the method as stability-indicating in accordance with the International Conference on Harmonization guidelines (ICH) for biotechnological drugs; therefore, we evaluated linearity, accuracy, precision, detection and quantification limits, robustness and system suitability. The specificity of the method and the robustness of the mAb formulation against external stress factors were estimated by comprehensive chromatographic analysis by subjecting CTX to several informative stress conditions. As demonstrated, the method is rapid, accurate, and reproducible for CTX quantification. It was also successfully used to quantify CTX in a long-term stability study performed under hospital conditions.

Cluster-based comparison of the peptide mass fingerprint obtained by MALDI-TOF mass spectrometry. A case study: long-term stability of rituximab

We evaluated the use of the peptide mass fingerprint (PMF) obtained by matrix assisted laser desorption and ionization (MALDI) time-of-flight mass spectrometry (TOF-MS) to track changes in the structure of a protein. The first problem we had to overcome was the inherent complexity of the PMF, which makes it difficult to compare. We dealt with this problem by developing a cluster-based comparison algorithm which takes into account the proportional error made by the mass spectrometer. This procedure involves grouping together similar masses in an intelligent manner, so that we can determine which data correspond to the same peptide (any slight differences can be explained as experimental errors), and which of them are too different and thus more likely to represent different peptides. The proposed algorithm was applied to track changes in a commercially available monoclonal antibody (mAb), namely rituximab (RTX), prepared under the usual hospital conditions and stored refrigerated (4 °C) and frozen (-20 °C) for a long term study. PMFs were obtained periodically over three months. For each checked time, five replicates of the PMFs were obtained in order to evaluate the similarities between them by means of the occurrences of the particular peptides (m/z). After applying the algorithm to the PMF, different approaches were used to analyse the results. Surprisingly, all of them suggested that there were no differences between the two storage conditions tested, i.e. the RTX samples were almost equally well preserved when stored refrigerated at 4 °C or frozen at -20 °C. The cluster-based methodology is new in protein mass spectrometry and could be useful as an easy test for major changes in proteins and biopharmaceutics for diverse applications in industry and other fields, and could provide additional stability data in relation to the practical use of anticancer drugs.

Antibody drug conjugates: design and selection of linker, payload and conjugation chemistry

Antibody drug conjugates (ADCs) have emerged as an important pharmaceutical class of drugs designed to harness the specificity of antibodies with the potency of small molecule therapeutics. The three main components of ADCs are the antibody, the linker, and the payload; the majority of early work focused intensely on improving the functionality of these pieces. Recently, considerable attention has been focused on developing methods to control the site and number of linker/drug conjugated to the antibody, with the aim of producing more homogenous ADCs. In this article, we review popular conjugation methods and highlight recent approaches including "click" conjugation and enzymatic ligation. We discuss current linker technology, contrasting the characteristics of cleavable and non-cleavable linkers, and summarize the essential properties of ADC payload, centering on chemotherapeutics. In addition, we report on the progress in characterizing to determine physicochemical properties and on advances in purifying to obtain homogenous products. Establishing a set of selection and analytical criteria will facilitate the translation of novel ADCs and ensure the production of effective biosimilars.

MS in the analysis of biosimilars

Biologic drugs are forming a larger and expanded part of the therapeutic drug market. The top ten best-selling drugs are currently a mix of small and large molecules, but it is expected that biologics will soon represent a large majority of the top-selling drugs. These drugs have a high degree of complexity and must be analyzed using information-rich analytical techniques to fully characterize the drug. Thus, biosimilar copies of these innovator drugs must also be intensively analyzed to ensure they have comparable analytical profiles. In this article we discuss the regulatory requirements for introducing a follow-on biologic, or biosimilar, drug on the market, how analytics in general can be used to reduce the need for comprehensive clinical trials, and how MS in particular is becoming increasingly valuable in these analyses.