The use of columns packed with sub-2 µm particles in supercritical fluid chromatography

In Situ Rapid Analysis of Squalene, Tocopherols, and Sterols in Walnut Oils Based on Supercritical Fluid Chromatography-Quadrupole Time-of-Flight Mass Spectrometry

Quantification of liposoluble micronutrients in large-scale vegetable oil samples is urgently needed, because their health benefits are increasingly emphasized. However, current analytical methods are limited to either labor-intensive preparation processes or time-consuming chromatography separation. In this work, an online oil matrix separation strategy for direct, rapid, and simultaneous determination of squalene, tocopherols, and phytosterols in walnut oil (WO) was developed on the basis of the lipid class separation mode of supercritical fluid chromatography. A single run was completed in 13 min containing 6 min of column cleaning and balancing. Satisfactory limit of detections (0.05-0.20 ng/mL), limit of quantifications (0.15-0.45 ng/mL), recoveries (70.61-101.44%), and matrix effects (78.43-91.62%) were achieved, indicating the reliability of this method. In addition, eight sterol esters were identified in WO, which have not previously been reported. The proposed method was applied to characterize the liposoluble micronutrient profile of WO samples obtained from different walnut cultivars, geographical origins, and processes.

Determination of steroid hormones in grey seal (Halichoerus grypus) blood plasma using convergence chromatography tandem mass spectrometry

A hybrid solid phase extraction (HybridSPE) protocol tailored to ultra-performance convergence chromatography tandem mass spectrometry (UPC²-MS/MS) was developed for the determination of 19 steroid hormones in grey seal (Halichoerus grypus) blood plasma. In this study, the protocol demonstrated acceptable absolute recoveries ranging from 33 to 90%. The chromatographic separation was carried out using a gradient elution program with a total run time of 5 min. For most target analytes, the method repeatability ranged from 1.9 to 24% and the method limits of quantification (mLOQs) ranged from 0.03 to 1.67 ng/mL. A total of 9 plasma samples were analysed to demonstrate the applicability of the developed method, and 13 steroid hormones were quantified in grey seal pup plasma. The most prevalent steroids: cortisol, cortisone, corticosterone, 11-deoxycortisol, progesterone and 17α-hydroxyprogesterone were detected at concentrations in the range of 12.6-40.1, 7.10-24.2, 0.74-10.7, 1.06-5.72, 0.38-4.38 and <mLOQ - 1.01 ng/mL, respectively. To our knowledge, this is the first study to determine steroid hormones in the plasma of pinnipeds using convergence chromatography.

An accurate and reliable analytical strategy for simultaneous determination of target furanocoumarins and flavonoids in cosmetic and pharmaceutical samples by ultra-high performance supercritical fluid chromatography

Furanocoumarins and flavonoids have various important biological activities and wide application. In the present study, a rapid and reliable supercritical fluid chromatography method was proposed for the separation of 10 target components including 8 furanocoumarins and 2 flavonoids. After detailed condition optimization, the 10 target compounds can be baseline separated on a Trefoil CEL1 (3.0 mm × 150 mm, 2.5 µm) column using gradient elution. A 0.07% (v/v) trifluoroacetic acid in ethanol was determined to be the most proper mobile phase for the separation of target compounds. The column temperature, back pressure, flow rate were set at 36 ℃, 2000 psi, 1.0 mL min^-1 to 1.4 mL min^-1, respectively. The ten target compounds were analyzed within 24 min using the optimized conditions. Under the optimized conditions, all the target compounds showed good linearity with linear correlation coefficients higher than 0.995, and satisfactory recovery in the range of 83.52-112.92%. All these results showed that the developed ultra-high performance supercritical fluid chromatography method was reliable and effective. Finally, the application of the developed method to cosmetic, Psoraleae fructus and Angelicae dahuricae radix samples were presented. The results highlight the applicability of the ultra-high performance supercritical fluid chromatography method to the analysis of interested compounds in pharmaceutical and cosmetic samples.

Triacylglycerol regioisomers containing palmitic acid analyzed by ultra-performance supercritical fluid chromatography and quadrupole time-of-flight mass spectrometry: Comparison of standard curve calibration and calculation equation

Triacylglycerol (TAG) regioisomers containing palmitic acid (16:0) was identified using ultra-performance supercritical fluid chromatography and quadrupole time-of-flight mass spectrometry (UPSFC-Q-TOF-MS) and quantified using calibration curve method and calculation equation method. There were negative linear correlation between [R_A-A]⁺/[R_A-A]⁺+[R_A-B]⁺ and content of sn-A-B-A (%) for AAB/ABA type TAGs, [R_{sn-1 FA-sn-3 FA}]⁺/[R_B-C]⁺+[R_A-C]⁺+[R_A-B]⁺ and content of fatty acid (FA) at sn-2 position (%) for BAC/ABC/ACB type TAGs. The difference between calculation equation and standard curve method was acceptable. The TAG regioisomers in human milk, mammalian milk, lard and fish oil were identified and quantified using the developed methods. This study provided a reliable and facile method for analysis of the TAG regioisomers, which was capable of the selection of oil materials for infant formula production.

Supercritical fluid chromatography for the analysis of natural dyes: From carotenoids to flavonoids

Plant-derived natural dyes are used in a variety of formulated products, from food to cosmetics and pharmaceutics. In addition to their color, they also provide some bioactivity. While they are mostly analyzed with high-performance liquid chromatography, supercritical fluid chromatography was also employed for several dye families, mostly for carotenoids and chlorophylls, and more recently for anthraquinones and flavonoids. These supercritical fluid chromatography methods are described in this review. Because the dyes have different structures and structural variations (polarity, isomers, etc.), the best chromatographic system to achieve their separation is not always the same. Hydrophobic stationary phases are preferred for the most hydrophobic dyes (chlorophylls and carotenoids) while polar stationary phases are preferred for the polar dyes (anthraquinones and flavonoids). Regarding the mobile phase composition, chlorophylls and carotenoids are best eluted with moderate proportions of co-solvent in CO₂ (about 40%), while the most polar glycosylated flavonoids require higher proportions of co-solvent and acidic additives. Because dyes are colorful, ultraviolet-visible detection is often sufficient, while mass spectrometry offers additional structural information. Furthermore, fundamental information can also be gained through chromatographic analysis of dyes: either solubility in supercritical fluids, in view of their extraction, or retention behavior providing an understanding of stationary phase properties.

Emerging Separation Techniques in Supercritical Fluid Chromatography

Supercritical fluid chromatography (SFC) has unique separative characteristics distinguished from those of HPLC and gas chromatography. At present, SFC is widely used and there are many applications in various biological, medical, and pharmaceutical fields. In this review, we focus on recently developed novel techniques related to SFC separation including: new column stationary phases, microfluidics, two-dimensional separation, and gas-liquid separation. In addition, we discuss the application of SFC using a water-containing modifier to biological molecules such as amino acids, peptides, and small proteins that had been challenging analytes.

Supercritical fluid chromatography using methacrylate-based monolithic column for the separation of polar analytes

A poly(N,N-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium betaine-co-ethylene dimethacrylate) monolith was prepared in a 100 × 2.0 mm id stainless-steel column and was investigated for supercritical fluid chromatography. Optimization of its porosity was performed by changing the conditions of polymerization. Then, the chemical group of this column was confirmed by Fourier transform infrared spectroscopy and elemental analysis. The morphology was characterized by scanning electron microscopy. The prepared column showed good repeatability based on the retention factor of adenine, uracil and cytosine to calculate their run-to-run, day-to-day, column-to-column, and batch-to-batch relative standard deviations. Those values were less than 1.9% (n = 10), 6.5% (n = 3), 5.6% (n = 3), and 1.7% (n = 3), respectively. In addition, the column was found to be stable within 3 and 10 days with relative standard deviations less than 6.5 and 8.5%, respectively. These results indicated that the columns showed good reproducibility and stability. Compared with liquid chromatogaphy, supercritical fluid chromatography provided better kinetic performance and selectivity. Finally, several neutral, acid, and basic polar analytes were utilized to test its application. The results demonstrated that the prepared column exhibited a good separation performance and showed great potential in supercritical fluid chromatography.

The effect of column history in supercritical fluid chromatography: Practical implications

Long-term stability of retention times of a wide range of analytes has been evaluated using eight different stationary phases. These were from a single manufacturer to minimize the differences in silanol activity caused by the manufacturing process. The tested stationary phases included bridge ethylene hybrid, 2-ethylpyridine bridge ethylene hybrid with direct modification of silica particles, bidentate crosslinked charged surface hybrid fluorophenyl, bidentate crosslinked high strength silica C18, and propanediol linked phases including diol (pure propanediol linker), and three phases based on diol further modified with 2-picolylamine, diethylamine, and 1-aminoanthracene group. Retention times were monitored at the first injection, after three, nine, twelve months, and after the column regeneration via washing with pure water. The analyses were carried out using three different mobile phases, including methanol, methanol with 10 mmol/L ammonium formate, and methanol with 0.1% ammonium hydroxide. No overall decreasing or increasing trends were observed after evaluating individual contributing parameters such as analyte, stationary phase, and organic modifier. Our results suggest that the silyl-ether formation is not the only factor contributing to changes in the stationary phase pore surface. Indeed, the adsorption of mobile phase additives is probably another significant factor. That was also confirmed by the regeneration procedure using water, which is likely to reverse the silyl-ether formation to achieve the original retention. However, the retention times returned to the original values for all analytes only on three columns. Retention times on other columns remained shifted within ± 15 % RSD depending on the analyte properties and the nature of organic modifier. The retention time variations observed for each analyte group, i.e., acids, bases, and neutrals, were interpreted for each stationary phase. We concluded that the sterically protected surfaces exhibited significantly smaller changes in the retention times. Although the regeneration procedure effect depended on the column type, the results suggested beneficial effect of water. However, as the adsorption of additives on the column surface is an additional factor leading to retention time variations, the recommendation of using only one additive and/or organic modifier in each column will clearly improve the long-term repeatability of the retention times.

Analytical strategies for the determination of amino acids: Past, present and future trends

This review describes the analytical methods that have been developed over the years to tackle the high polarity and non-chromophoric nature of amino acids (AAs). First, the historical methods are briefly presented, with a strong focus on the use of derivatization reagents to make AAs detectable with spectroscopic techniques (ultraviolet and fluorescence) and/or sufficiently retained in reversed phase liquid chromatography. Then, an overview of the current analytical strategies for achiral separation of AAs is provided, in which mass spectrometry (MS) becomes the most widely used detection mode in combination with innovative liquid chromatography or capillary electrophoresis conditions to detect AAs at very low concentration in complex matrixes. Finally, some future trends of AA analysis are provided in the last section of the review, including the use of supercritical fluid chromatography (SFC), multidimensional liquid chromatography and electrophoretic separations, hyphenation of ion exchange chromatography to mass spectrometry, and use of ion mobility spectrometry mass spectrometry (IM-MS). Various application examples will also be presented throughout the review to highlight the benefits and limitations of these different analytical approaches for AAs determination.

Applicability of supercritical fluid chromatography - mass spectrometry to metabolomics. I - Optimization of separation conditions for the simultaneous analysis of hydrophilic and lipophilic substances

The aim of this study was to evaluate the suitability of SFC-MS for the analysis of a wide range of compounds including lipophilic and highly hydrophilic substances (log P values comprised between -6 and 11), for its potential application toward human metabolomics. For this purpose, a generic unified chromatography gradient from 2 to 100% organic modifier in CO₂ was systematically applied. In terms of chemistry, the best stationary phases for this application were found to be the Agilent Poroshell HILIC (bare silica) and Macherey-Nagel Nucleoshell HILIC (silica bonded with a zwitterionic ligand). To avoid system overpressure at very high organic modifier proportion, columns of 100 × 3 mm I.D. packed with sub-3 μm superficially porous particles were selected. In terms of organic modifier, a mixture of 95% MeOH and 5% water was selected, with 50 mM ammonium formate and 1 mM ammonium fluoride, to afford good solubility of analytes in the mobile phase, limited retention for the most hydrophilic metabolites and suitable peak shapes of ionizable species. A sample diluent containing 50%ACN/50% water was employed as injection solvent. These conditions were applied to a representative set of metabolites belonging to nucleosides, nucleotides, small organic acids, small bases, sulfated/sulfonated metabolites, poly-alcohols, lipid related substances, quaternary ammonium metabolites, phosphate-based substances, carbohydrates and amino acids. Among all these metabolites, 65% of the compounds were adequately analyzed with excellent peak shape, 23% provided distorted peak shapes, while only 12% were not detected (mostly metabolites having several phosphate or several carboxylic acid groups).

Enantioselective ultra high performance liquid and supercritical fluid chromatography: The race to the shortest chromatogram

The ever-increasing need for enantiomerically pure chiral compounds has greatly expanded the number of enantioselective separation methods available for the precise and accurate measurements of the enantiomeric purity. The introduction of chiral stationary phases for liquid chromatography in the last decades has revolutionized the routine methods to determine enantiomeric purity of chiral drugs, agrochemicals, fragrances, and in general of organic and organometallic compounds. In recent years, additional efforts have been placed on faster, enantioselective analytical methods capable to fulfill the high throughput requirements of modern screening procedures. Efforts in this field, capitalizing on improved chromatographic particle technology and dedicated instrumentation, have led to highly efficient separations that are routinely completed on the seconds time scale. An overview of the recent achievements in the field of ultra-high-resolution chromatography on column packed with chiral stationary phases, both based on sub-2 μm fully porous and sub-3 μm superficially porous particles, will be given, with an emphasis on very recent studies on ultrafast chiral separations.

Current state of bioanalytical chromatography in clinical analysis

Chromatographic methods have become popular in clinical analysis in both routine and research laboratories.

A systematic investigation of sample diluents in modern supercritical fluid chromatography

This paper focuses on the possibility to inject large volumes (up to 10μL) in ultra-high performance supercritical fluid chromatography (UHPSFC) under generic gradient conditions. Several injection and method parameters have been individually evaluated (i.e. analyte concentration, injection volume, initial percentage of co-solvent in the gradient, nature of the weak needle wash solvent, nature of the sample diluent, nature of the column and of the analyte). The most critical parameters were further investigated using in a multivariate approach. The overall results suggested that several aprotic solvents including methyl tert-butyl ether (MTBE), dichloromethane, acetonitrile or cyclopentyl methyl ether (CPME) were well adapted for the injection of large volume in UHPSFC, while MeOH was generally the worst alternative. However, the nature of the stationary phase also had a strong impact and some of these diluents did not perform equally on each column. This was due to the existence of a competition in the adsorption of the analyte and the diluent on the stationary phase. This observation introduced the idea that the sample diluent should not only be chosen according to the analyte but also to the column chemistry to limit the interactions between the diluent and the ligands. Other important characteristics of the "ideal" SFC sample diluent were finally highlighted. Aprotic solvents with low viscosity are preferable to avoid strong solvent effects and viscous fingering, respectively. In the end, the authors suggest that the choice of the sample diluent should be part of the method development, as a function of the analyte and the selected stationary phase.

Supercritical Fluid Chromatography of Drugs: Parallel Factor Analysis for Column Testing in a Wide Range of Operational Conditions

Retention mechanisms involved in supercritical fluid chromatography (SFC) are influenced by interdependent parameters (temperature, pressure, chemistry of the mobile phase, and nature of the stationary phase), a complexity which makes the selection of a proper stationary phase for a given separation a challenging step. For the first time in SFC studies, Parallel Factor Analysis (PARAFAC) was employed to evaluate the chromatographic behavior of eight different stationary phases in a wide range of chromatographic conditions (temperature, pressure, and gradient elution composition). Design of Experiment was used to optimize experiments involving 14 pharmaceutical compounds present in biological and/or environmental samples and with dissimilar physicochemical properties. The results showed the superiority of PARAFAC for the analysis of the three-way (column × drug × condition) data array over unfolding the multiway array to matrices and performing several classical principal component analyses. Thanks to the PARAFAC components, similarity in columns' function, chromatographic trend of drugs, and correlation between separation conditions could be simply depicted: columns were grouped according to their H-bonding forces, while gradient composition was dominating for condition classification. Also, the number of drugs could be efficiently reduced for columns classification as some of them exhibited a similar behavior, as shown by hierarchical clustering based on PARAFAC components.