Recent advances in sample preparation and analysis methods for vitamin D and its analogues in different matrices

A Cost-Effective Nonaqueous Reversed-Phase High-Performance Liquid Chromatography Method to Measure Vitamin D3 in Hen's Egg Yolk

The objective of this study is to develop an HPLC-UV method for the cost-effective and quantitative determination of vitamin D3 in food, even in the presence of vitamin D2, with a specific focus on egg yolk. During method development, the performance of three stationary phases in resolving the peak of vitamin D2 from that of vitamin D3 was investigated. The physicochemical properties of these phases differed particularly in the extent of hydrophobicity and silanophilic activity, including a GraceSmart RP C18 column without silanol endcapping, a Robusta RP C18 column with silanol endcapping, and a Waters Xbridge RP C18 column with ethylene-bridged hybrid (BEH) particle technology. The Xbridge C18 stationary phase exhibited the most favorable performance, leading to an RS of 1.6 under the following nonaqueous reversed-phase (NARP) experimental conditions: mobile phase, acetonitrile, methanol, and trifluoroacetic acid in a (99/1/0.1, v/v/v) ratio; column temperature, 15°C. The developed chromatographic method does not require preanalytical purification steps and is also compatible with mass spectrometry. The identity of the vitamin D3 peak observed in the HPLC analysis was verified via GC-MS. The NARP-HPLC-UV method was partially validated, demonstrating satisfactory linearity, precision, accuracy, limit of quantification, and robustness. The HPLC method was then successfully applied to the analysis of real egg yolk samples, revealing average concentrations of vitamin D3 of 4-5 µg/g of wet weight sample.

Recent development on the extraction, detection, and quantification of vitamin D from various sources - an update

Recent advancements in analytical methods for vitamin D and its metabolites have substantially enhanced our capacity to precisely determine and quantify these substances in a wide range of sources, such as biological fluids, fungus, natural and fortified foods. This study focuses on the latest advancements in sample preparation procedures, including solid-phase extraction and environmentally friendly extraction methods. These approaches aim to enhance efficiency and minimize the use of solvents. In addition, we explore the growing popularity of chromatographic methods, specifically LC-MS/MS and developing supercritical fluid chromatography (SFC), which provide improved sensitivity, selectivity, and faster analytical times for comprehensive vitamin D profiling. These developments are crucial for overcoming the challenges presented by low concentrations and complex matrices in the investigation of vitamin D.

Comprehensive analysis of vitamin D3 impurities in oily drug products using supercritical fluid chromatography-mass spectrometry

Vitamin D3, an essential micronutrient, often requires supplementation via medicines or food supplements, which necessitate quality control (QC). This study presents the development of a method for detecting and quantifying seven impurities of vitamin D3 in oily drug products using supercritical fluid chromatography-mass spectrometry (SFC-MS). Targeted impurities include two esters of vitamin D3 and five non-esters including four that are isobaric to vitamin D3. Firstly, a screening study highlighted the Torus 1-AA column and acetonitrile modifier as adequate for the separation, followed by optimization of the SFC conditions. Secondly, make-up solvent composition and MS settings were optimized to reach high sensitivity. For both the separation and MS response, the screening design of experiments proved useful. Lastly, a fast saponification and liquid-liquid extraction method was developed, enabling efficient sample cleanup and impurities recovery from the complex oily matrix. The SFC-MS method suitability was assessed in two validation studies. The first study employed the ICH Q2 guideline for impurity limit test to demonstrate method specificity and establish a limit of detection (LOD) and a limit of quantification (LOQ) at 0.2% and 0.5%, respectively, for ester impurities. The second study conducted a comprehensive quantitative assessment for three non-ester impurities using a total error approach, determining method validity through accuracy profiles. The validated method exhibited reliable performance across impurity concentrations from 0.1% to 2.0%, with estimated LODs ranging from 2 to 7 ng/mL. This study further promotes SFC-MS as a valuable, versatile, and green tool for routine pharmaceutical QC.

Analysis of vitamin D and its metabolites in biological samples - Part I: Optimization and comparison of UHPSFC-MS/MS and UHPLC-MS/MS methods

Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations. In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC. Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 - 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 - 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.

Analysis of vitamin D and its metabolites in biological samples - Part II: Optimization of a sample preparation method for liver tissue

Extraction of vitamin D, including its hydroxylated and esterified metabolites, from soft tissues such as the liver is challenging due to the lipophilic character of matrix and analytes that are expected in very low concentration levels. In this study, we aimed at the optimization of two-step extraction using solid-liquid extraction as the first step, followed by solid-phase extraction. Various solvents, including ethanol, acetonitrile, methanol, acetone, heptane, and heptane with isopropanol, were investigated to isolate vitamin D compounds from liver tissue in the first step. Acetone was finally selected as the most suitable solvent for the solid-liquid extraction, with the highest recovery in the range of 67 - 98% for polar hydroxylated forms and 3 - 28% for lipophilic vitamin D and esters. Two solid phase extraction (SPE) based on the (i) "bind and elute strategy" and (ii) "removal strategy" using hydrophilic-lipophilic balanced SPE sorbent were optimized as a proceeding step for acetone extracts to increase the method selectivity. Finally, two optimized methods, combining solid-liquid extraction and individual SPE strategy, were examined in terms of sensitivity, recovery, matrix effect, accuracy, and precision. The limits of quantification were in the range of 1 - 10 ng/mL and 3 - 20 ng/mL analyzed by ultra-high performance supercritical fluid chromatography and ultra-high performance liquid chromatography hyphenated a with tandem mass spectrometer, respectively. The absolute recovery determined for the "bind and elute strategy" protocol was in the range of 3 - 24 %. Nevertheless, this method was free of matrix effects, which were determined to be in the 73 - 120 % range. On the contrary, the "removal strategy" approach provided higher recovery values for all compounds (47 - 123 %), but the results for nonpolar vitamin D and esters were strongly affected by signal suppression (matrix effects 3 - 51 %). Both methods fulfilled the criteria for accuracy and precision requested by the European Medicine Agency Guideline on Bioanalysis. "Removal strategy" SPE with decreased manual intervention and lower solvent consumption was finally applied to mouse liver tissue to determine vitamin D and its hydroxylated and esterified metabolites for the first time. The results, i.e., vitamin D esters detected in liver tissue, supported the notion that esters of vitamin D can be stored in lipophilic tissues to release vitamin D.

Accurate Clinical Detection of Vitamin D by Mass Spectrometry: A Review

Vitamin D deficiency is thought to be associated with a wide range of diseases, including diabetes, cancer, depression, neurodegenerative diseases, and cardiovascular and cerebrovascular diseases. This vitamin D deficiency is a global epidemic affecting both developing and developed countries and therefore qualitative and quantitative analysis of vitamin D in a clinical context is essential. Mass spectrometry has played an increasingly important role in the clinical analysis of vitamin D because of its accuracy, sensitivity, specificity, and the ability to detect multiple substances at the same time. Despite their many advantages, mass spectrometry-based methods are not without analytical challenges. Front-end and back-end challenges such as protein precipitation, analyte extraction, derivatization, mass spectrometer functionality, must be carefully considered to provide accurate and robust analysis of vitamin D through a well-designed approach with continuous control by internal and external quality control. Therefore, the aim of this review is to provide a comprehensive overview of the development of mass spectrometry methods for vitamin D accurate analysis, including emphasis on status markers, deleterious effects of biological matrices, derivatization reactions, effects of ionization sources, contribution of epimers, standardization of assays between laboratories.

Metasurface-assisted Lab-on-fiber optrode for highly sensitive detection of vitamin D

The increasing demand for vitamin D status assessment has highlighted the need for rapid, sensitive, and user-friendly methods for its detection in biological samples potentially integrated in Point-of-Care (PoC) diagnostic devices. Detection of the major circulating form of vitamin D, 25-hydroxyvitamin D3-25(OH)D3, is particularly challenging due to the laborious procedures for sample preparation and its low molecular weight (∼400 Da), which requires highly sensitive detection methods. In this study, we developed a novel label-free Lab-on-Fiber biosensing platform for highly sensitive detection of 25(OH)D3 based on the integration of plasmonic metasurfaces (MSs) on the tip of a single-mode optical fiber (OF). A dedicated pipeline was carefully designed and developed to optimize the bio-functionalization of the plasmonic sensor tip to specifically detect the target biomolecule. The resulting MS-assisted Lab-on-fiber platform enables direct and highly sensitive detection of 25(OH)D3 in clinically relevant ranges (4-160 ng/mL), both in buffer solution and complex matrix, with limits of detection (LOD) of 1.40 ng/mL in saline buffer and 0.85 ng/mL in complex matrix. Overall, these results demonstrate that our platform can successfully and specifically detect small molecules in label-free configuration, with performances comparable to those of conventional methods used in clinical practice. The high degree of miniaturization combined with its high sensitivity makes our platform an exceptional building block for realizing valid diagnostic alternatives for label-free detection of clinically relevant analytes, which can be transformed into new low-cost, fast, simple, and ready-to-use PoC diagnostic devices with improved processability and performance compared to current methods.

Lemon extract supported green synthesis of bimetallic CuO/Ag nanoporous materials for sensitive detection of vitamin D3

In modern era, deficiency of Vitamin D3 is predominantly due to limited exposure to sunlight and UV radiation resulting from indoor lifestyles. Several studies have revealed that vitamin D deficiency can lead to chronic vascular inflammation, diabetes mellitus, hypertension, congestive left ventricular hypertrophy, and heart failure. This study introduces a green synthesis of novel bimetallic nanoporous composite, CuO/Ag using lemon extract. The synthesized nanoporous material, CuO/Ag@lemon extract was characterized using several analytical techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The CuO/Ag@lemon extract nanoparticles were immobilized on glassy carbon electrode (GCE) to prepare modified CuO/Ag@lemon extract-GCE interface. The electrocatalytic and electrochemical properties investigation was carried out on the modified electrode. using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometry for detecting of Vitamin D3. The DPV method displayed a linear response range of 0.02-22.5 µM with a detection limit of 2.62 nM, while the amperometric method showed a broader linear range of 0.25-23.25 µM with a detection limit of 2.70 nM with 82% modified electrode stability. The designed electrode exhibited a positive response to the inclusion of Vitamin D3 with electro-oxidation, reaching steady-state within 3.4 s, with 87% reproducibility within a day. The proposed method offers a rapid and sensitive platform for detection of Vitamin D3 with minimal interference from other molecules. The early diagnosis of Vitamin D3 deficiency using modified electrodes allows for early treatment, thereby preventing severe health complications.

Determination of vitamin D metabolites in various biological samples through an improved chemical derivatization assisted liquid chromatography-tandem mass spectrometry approach

Vitamin D (VD) metabolites are involved in a variety of important metabolic processes and physiological effects in organisms. Profiling of VD metabolites favors a deep understanding of the physiological role of VD. However, VD metabolites are difficult to detect due to their high chemical structural rigidity, structural similarity, and low sensitivities under liquid chromatography-tandem mass spectrometry (LC-MS). Herein, we present a chemical derivatization assisted LC-MS/MS strategy for the detection of VDs, in which 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) is employed to derivatize the conjugated diene of VD metabolites and provides sensitizing reporters for MS detection. After PTAD derivatization, the sensitivities of seven VD metabolites increased by 24-276 folds, with the limits of detection ranging from 3 to 20 pg mL-1. Using this method, we achieved a sensitive and accurate quantification of 7 VD metabolites (vitamin D2, vitamin D3, 25-hydroxyvitamin D2, 25-hydroxyvitamin D3, 1,25-dihydroxyvitamin D2, 1,25-dihydroxyvitamin D3, and 1,24,25-trihydroxyvitamin D3) of the VD metabolic pathway in different trace biological samples, including human serum, mouse tissues (namely liver, kidney, lung, and spleen), and cells. We believe that the present method can provide a promising tool for an in-depth analysis of VD metabolism.

A new method based on dispersive liquid-liquid microextraction for fat-soluble vitamin determination in serum by LC-MS/MS

A green and inexpensive pretreatment known as dispersive liquid-liquid microextraction (DLLME) was developed in this assay coupled with the LC-MS/MS method for routine analysis of fat soluble vitamins (FSVs). The technique was performed with methanol as the dispersive solvent and dichloromethane as the extraction solvent. The extraction phase containing FSVs was evaporated to dryness and reconstituted in a mixture of acetonitrile and water. The influence variables concerning the DLLME procedure were optimized. After that, the method was investigated for its applicability in LC-MS/MS analysis. As a result, the parameters were settled for the optimal conditions during the DLLME process. A cheap and lipid-free substance was found as an alternative to serum to eliminate the matrix effect while preparing the calibrators. The method validation indicated that it was suitable for determining FSVs in serum. Moreover, this method was applied successfully to determine serum samples, which was consistent with the literature. In summary, the DLLME method developed in this report was reliable and more cost-effective than the traditional LC-MS/MS method, and could be applied in the future.

Quantification of 25OHD in serum by ID-LC-MS/MS based on oriented immobilization of antibody on magnetic materials

Magnetic nanomaterials are widely used, but co-adsorption of impurities will lead to saturation. In this study, the aim was to prepare a magnetic nano-immunosorbent material based on orienting immobilization that can purify and separate 25-hydroxyvitamin D (25OHD) from serum and provides a new concept of sample pretreatment technology. Streptococcus protein G (SPG) was modified on the surface of the chitosan magnetic material, and the antibody was oriented immobilized using the ability of SPG to specifically bind to the Fc region of the monoclonal antibody. The antigen-binding domain was fully exposed and made up for the deficiency of the antibody random immobilization. Compared with the antibody in the random binding format, this oriented immobilization strategy can increase the effective activity of the antibody, and the amount of antibody consumed is saved to a quarter of the former. The new method is simple, rapid, and sensitive, without consuming a lot of organic reagents, and can enrich 25OHD after simple protein precipitation. Combining with liquid chromatography-tandem mass spectrometry (LC-MS/MS), the analysis can be completed in less than 30 min. For 25OHD₂ and 25OHD₃, the LOD was 0.021 and 0.017 ng mL^-1, respectively, and the LOQ was 0.070 and 0.058 ng mL^-1, respectively. The results indicated that the magnetic nanomaterials based on oriented immobilization can be applied as an effective, sensitive, and attractive adsorbent to the enrichment of serum 25OHD.

Determination of vitamin D3 conjugated metabolites: a complementary view on hydroxylated metabolites

Experts typically define vitamin D deficiency levels by the determination of a circulating 25-hydroxyvitamin D₃-calcifediol prohormone. A large part of the population is characterized by deficient vitamin D levels (calcifediol < 20 ng mL^-1) despite individuals not being affected by any disorder. Cholecalciferol (vitamin D₃) and/or calcifediol supplementation is a common practice for vitamin D-deficient individuals as recommended by international scientific societies and official agencies. In the last few years, several studies have reported the presence of conjugated vitamin D₃ metabolites, mainly glucuronidation and sulfation derivatives, although simultaneous quantitative measurements involving phase I and II vitamin D metabolites have not been carried out. A quantitative method based on tandem mass spectrometry detection is proposed here for the combined determination of phase I and phase II vitamin D₃ metabolites in human serum. As phase I and phase II metabolites are preferentially ionized in different modes, a switching polarity mode was adopted to determine both groups of compounds in serum at high sensitivity levels (pg mL^-1). The validation of this proposal was successfully accomplished by following the Center for Drug Evaluation and Research (CDER) guidelines. Its applicability was tested in a cohort of volunteers with mostly deficient baseline levels. Considering the sulfated form of calcifediol, the sum of its concentrations showed sufficient baseline vitamin D levels in all individuals, suggesting that this could be a novel strategy for vitamin D deficiency definition. Therefore, phase II metabolites are proposed to be included when evaluating the vitamin D status since they provide more information about the overall status of the vitamin D endocrine system. Nevertheless, further studies are required to confirm the biological activity of these conjugated metabolites and the suitability of this strategy for the description of vitamin D deficiency.

Vitamin D: sources, physiological role, biokinetics, deficiency, therapeutic use, toxicity, and overview of analytical methods for detection of vitamin D and its metabolites

Vitamin D has a well-known role in the calcium homeostasis associated with the maintenance of healthy bones. It increases the efficiency of the intestinal absorption of dietary calcium, reduces calcium losses in urine, and mobilizes calcium stored in the skeleton. However, vitamin D receptors are present ubiquitously in the human body and indeed, vitamin D has a plethora of non-calcemic functions. In contrast to most vitamins, sufficient vitamin D can be synthesized in human skin. However, its production can be markedly decreased due to factors such as clothing, sunscreens, intentional avoidance of the direct sunlight, or the high latitude of the residence. Indeed, more than one billion people worldwide are vitamin D deficient, and the deficiency is frequently undiagnosed. The chronic deficiency is not only associated with rickets/osteomalacia/osteoporosis but it is also linked to a higher risk of hypertension, type 1 diabetes, multiple sclerosis, or cancer. Supplementation of vitamin D may be hence beneficial, but the intake of vitamin D should be under the supervision of health professionals because overdosing leads to intoxication with severe health consequences. For monitoring vitamin D, several analytical methods are employed, and their advantages and disadvantages are discussed in detail in this review.

Novel QuEChERS-ultra-performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry method for the simultaneous determination of vitamin D and vitamin K in vitamin-fortified nanoemulsions

Nanoemulsion is a new vehicle for food fortification. In this study, a simple and reliable method for the simultaneous analysis of vitamins D₂, D₃, K₁, and K₂ in vitamin-fortified nanoemulsions was developed using QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction and ultra-high performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry techniques. Response surface methodology was employed to optimize the extraction parameters. The method was validated for the vitamins in terms of LOD (0.03-0.25 μg/L), LOQ (0.10-0.77 μg/L), intra-day (≤4.50%), inter-day precisions (≤6.43%), and accuracy (98.5%-108.0%). The recoveries of the vitamin-fortified nanoemulsion and yogurt were in the ranges of 104.0%-109.2% and 73.3%-85.2%, respectively. The solvent consumption and analysis time were reduced by 5.6 and 3.3 folds, respectively, rendering it superior to the traditional extraction methods established by the Association of Official Analytical Chemists and the Ministry of Food and Drug Safety.

Advances in electrochemical sensors based on nanomaterials for the detection of lipid hormone

Lipid hormone is produced by highly differentiated endocrine cells and directly secretes into the blood circulation or tissue fluid to act as information transmission. It influences the physiological functions of the human body by controlling the metabolic processes of multiple tissue cells. Monitoring the levels of lipid hormone is of great importance for maintaining human health. The electrochemical sensor is considered as an ideal tool to detect lipid hormone owing to its advantages such as quick response, convenience and low economic costs. In recent 3 years, researchers have developed various electrochemical sensors for the detection of lipid hormone to improve their sensitivity or selectivity. The use of nanomaterials (such as carbon nanomaterials, precious metal and polymer) is a key research object and a breakthrough for improving the sensing performance of electrochemical sensors for detection of lipid hormone. This paper reviews and discusses the basic principle, nanomaterials, actuality and future development trend of electrochemical sensors for the detection of lipid hormone in the past 3 years.

Measuring Vitamin D3 Metabolic Status, Comparison between Vitamin D Deficient and Sufficient Individuals

The main branch of vitamin D3 metabolism involves several hydroxylation reactions to obtain mono-, di- and trihydroxylated metabolites, including the circulating and active forms—25(OH)D3 and 1,25(OH)2D3, respectively. However, most clinical trials strictly target the determination of 25(OH)D3 to offer a view of the metabolic status of vitamin D3. Due to the growing interest in expanding this restricted view, we have developed a method for measuring vitamin D3 metabolism by determination of vitamin D3, 25(OH)D3, 24,25(OH)2D3, 1,25(OH)2D3 and 1,24,25(OH)3D3 in human plasma. The method was based on SPE–LC–MS/MS with a large volume injection of human plasma (240 µL). Detection of di- and trihydroxymetabolites, found at the picogram per milliliter level, was attained by the combined action of high preconcentration and clean-up effects. The method allows obtaining information about ratios such as the known vitamin D metabolite ratio (24,25(OH)2D3/25(OH)D3), which can provide complementary views of vitamin D3 metabolic status. The method was applied to a cohort of obese patients and a reference cohort of healthy volunteers to find metabolic correlations between target analytes as well as differences as a function of vitamin D levels within and between cohorts.

Sample preparation techniques for extraction of vitamin D metabolites from non-conventional biological sample matrices prior to LC-MS/MS analysis

The determination of vitamin D metabolites as status marker or for diagnostic purposes is almost entirely conducted from blood serum or plasma. Other biological matrices, however, have also interested researchers, for two main reasons: (1) alternative matrices may allow non-invasive sampling, permit easier sample transfer and require less demanding storage conditions; and (2) the levels of vitamin D metabolites in other body compartments may further aid the understanding of vitamin D metabolism and function. Thus, the development of reliable and efficient sample preparation protocols for sample matrices other than serum/plasma, which will remove potential interferences and selectively extract the targeted metabolites, is of great importance. This review summarizes sample preparation methods for measurement of vitamin D metabolites using liquid chromatography-(tandem)mass spectrometry in more than ten different human tissues, including hair, saliva, adipose tissue, brain and others.

Simultaneous Determination of Vitamin D and Its Hydroxylated and Esterified Metabolites by Ultrahigh-Performance Supercritical Fluid Chromatography-Tandem Mass Spectrometry

In this study, an analytical method has been developed that, for the first time, allows simultaneous determination of vitamin D₂ and vitamin D₃ along with their hydroxylated and esterified forms. A group of 12 vitamin D analogues including vitamin D₂ and vitamin D₃, seven hydroxylated metabolites, and three ester forms were separated in a single 8.0 min run using ultrahigh-performance supercritical fluid chromatography coupled with triple quadrupole tandem mass spectrometry. Electrospray ionization and atmospheric pressure chemical ionization were investigated as ion sources, of which the latter showed a higher ionization efficiency. Chromatographic conditions were thoroughly evaluated by a step-by-step method, whereas an experimental design was applied for the optimization of the ionization parameters. Calibration and repeatability studies were carried out to validate the instrumental methodology showing determination coefficients higher than 0.9992 and good intra- and interday precision with relative standard deviations for areas and retention times lower than 10 and 2.1%, respectively, for all target analytes. Limits of quantification were below 3.03 μg/L for all compounds. The methodology was then validated and applied for the evaluation of human plasma samples in order to demonstrate its applicability to the analysis of vitamin D analogues in biological samples. Samples of five individuals were analyzed. Results show that linoleate-D₃, vitamin D₂, vitamin D₃, 25-hydroxyvitamin D₂, 24,25-dihydroxyvitamin D₃, and 1,25-dihydroxyvitamin D₃ could be detected in most samples, while the two latter also were quantified in all analyzed samples.

Analysis of vitamin D metabolic markers by mass spectrometry: Recent progress regarding the "gold standard" method and integration into clinical practice

Liquid chromatography/tandem mass spectrometry is firmly established today as the gold standard technique for analysis of vitamin D, both for vitamin D status assessments as well as for measuring complex and intricate vitamin D metabolic fingerprints. While the actual mass spectrometry technology has seen only incremental performance increases in recent years, there have been major, very impactful changes in the front- and back-end of MS-based vitamin D assays; for example, the extension to new types of biological sample matrices analyzed for an increasing number of different vitamin D metabolites, novel sample preparation techniques, new powerful chemical derivatization reagents, as well the continued integration of high resolution mass spectrometers into clinical laboratories, replacing established triple-quadrupole instruments. At the same time, the sustainability of mass spectrometry operation in the vitamin D field is now firmly established through proven analytical harmonization and standardization programs. The present review summarizes the most important of these recent developments.

Generic SFC-MS methodology for the quality control of vitamin D3 oily formulations

Vitamin D₃ is a key micronutrient whose intakes are inadequate for most populations worldwide. Supplementation with medicines or food supplements is commonly prescribed to correct this imbalance and the quality of these products must be ensured. In this context, a generic methodology for the assay of vitamin D₃ in oily formulations is proposed using supercritical fluid chromatography coupled to mass spectrometry (SFC-MS). It is in line with green analytical chemistry principles and combines the use of i) a fast and robust analytical method (4.0 min analysis time) ii) an easy sample preparation compatible with high throughput analysis ("dilute-and-shoot" approach) and iii) a relevant control strategy. Seventeen products from multiple manufacturers and encompassing a large content range were evaluated in this study. They were classified in four groups to streamline their processing considering the use of a matrix-matched calibration procedure. Matrix effect was thoroughly studied and was found to be low (99-106%), stable intra/inter-series and comparable between the different groups and types of matrices. The implemented control strategy was based on a three-level system suitability tests (SST). Level 1 SST: resolution of the critical pair that was above 1.5 for all analysis series. Level 2 SST: evaluation of the adequacy of the calibration for a QC sample in terms of recovery that was between 97% and 104% with a variability between 1% and 2%. Level 3 SST: method trueness that was between 95% and 102%. Sample analysis highlighted differences in types of products and dosage forms. This is the first study to propose a complete strategy for the quality control of vitamin D₃ oily formulations and should prove useful in QC laboratories.

Detection of Vitamin D Metabolites in Breast Milk: Perspectives and challenges for measurement by Liquid Chromatography Tandem-Mass Spectrometry

Breast milk is an emerging matrix for vitamin D assessment of breastfed infants and their mothers. It is considered a more reliable indicator of infant intake than the assessment of maternal circulating vitamin D. With the improved sensitivity of mass spectrometry-based technologies, this method principle has been the recent mainstay for the quantitation of various vitamin D metabolites in breast milk for population-based clinical trials. There are still several areas across the total testing process (pre-analytical, analytical and post-analytical) to be defined and harmonised to translate breast milk vitamin D measurement by liquid chromatography-tandem mass spectrometry (LC-MS/MS) from population-based research to routine clinical use and public health applications. Pre-analytically, the determination of the best form of vitamin D to measure in breast milk requires more evidence. Analytically, standardisation of the methods to allow for comparability of results is required. Post analytically, breast milk vitamin D decision limits are needed to turn the individual numerical outputs into clinically meaningful results. This review aims to synthesise the current evidence and utility of measurement of breast milk vitamin D by LC-MS/MS and to lead a future discussion on best practices to allow for its clinical utility beyond its current research-based use.

Carbon cloth-based immunosensor for detection of 25-hydroxy vitamin D3

Vitamin D (VD) deficiency is a global health concern due to its serious health impacts, and at present, the monitoring of VD status is expensive. Here, a novel immunosensor for sensitive and label-free detection of 25-hydroxy vitamin D₃ (25VD₃) is reported. Nanostructured cerium(IV) oxide (nCeO₂) was anchored onto carbon cloth (CC) via electrophoretic deposition to fabricate a nanoplatform (nCeO₂/CC). Subsequently, bioactive molecules (anti-25VD₃ and BSA) were introduced to fabricate the nanobioplatform BSA/anti-25VD₃/nCeO₂/CC as an immunosensor. The analytical performance of the developed immunosensor was studied towards 25VD₃ detection. The immunosensor provides a broad linear range of 1-200 ng mL^-1, high sensitivity of 2.08 μA ng⁻¹ mL cm⁻², a detection limit of 4.63 ng mL⁻¹, and a response time of 15 min, which is better than that of previous reports. The biosensor exhibited high selectivity, good reproducibility, and excellent stability for about 45 days. The potential application of the proposed immunosensor was observed for real serum samples towards 25VD₃ detection that demonstrated a high correlation with the conventional enzyme-linked immunosorbent assay.

Optimization and application of high-throughput supported liquid extraction for simultaneous determination of carotenoids and fat-soluble vitamins in serum

The demand for analysis of carotenoids (CAR) and fat-soluble vitamins (FSV) is continuously expanding, but currently used sample preparation methods either require complicated extraction procedure or large sample volume, let alone the reliability of the results. This study aimed to develop a fast, high-efficient, and high-throughput method based on supported liquid extraction (SLE) for the simultaneous extraction of FSV and CAR from human serum before using high-performance liquid chromatography-diode array detector (HPLC-DAD) analysis. The optimization of SLE parameters was achieved through response surface methodology (RSM) based on the Box-Behnken design (BBD) and included serum-water-extraction solvent ratio and eluent volume. Under optimal conditions, the proposed method gives acceptable limits of detection (LOD) (0.005-0.3 μg/mL), good recovery (89.6-110.9%) as well as relative standard deviation (RSD) of less than 10.1% by consuming lower serum sample (100 μL) and less sample preparation time (2 min per sample). Compared with liquid-phase extraction (LLE), the SLE delivers rapid extraction with higher recovery, better reproducibility, and lower matrix effect for CAR and FSV analysis. The method has been successfully applied to quantify CAR and FSV levels in serum of healthy individuals and age-related macular degeneration (AMD) patients, demonstrating the feasibility of the proposed method for epidemiology and routine applications.

Comparative Study for the Determination of Fat-Soluble Vitamins in Rice Cereal Baby Foods Using HPLC-DAD and UHPLC-APCI-MS/MS

Two liquid chromatographic systems, one coupled to atmospheric pressure chemical ionization and tandem mass spectrometric methods (UHPLC-APCI-MS/MS) and the other a high-performance liquid chromatographic coupled to diode array detector (HPLC-DAD) were used to develop and validate methods for the simultaneous determination of fat-soluble vitamins A, D3 and E in rice cereal baby foods. The chromatographic separation was performed on C18 columns with a mixture of methanol-acetonitrile as mobile phase for all methods. The extraction of fat-soluble vitamins included enzymatic hydrolysis with α-amylase, saponification, extraction with petroleum ether or n-hexane and purification with silica cartridge (only for vitamin D3). Quantification of vitamin D3 and E through UHPLC-APCI-MS/MS was performed by the use of internal standards (IS) D3-d3 and E-d6, respectively, while IS was not used for vitamin A. The methods were optimized and validated in terms of linearity, precision, trueness, limits of detection and quantification. The recoveries were in the range of 85.0-107% for retinol, 92.0-105% for α-tocopherol and 95.2-106% for cholecalciferol and the %RSD (Relative Standard Deviation) values ranged from 6.4% to 15%. The evaluation of the methods was also conducted through the estimation of uncertainties, the application in commercial samples and the participation in a proficiency test.

Recent applications of microextraction sample preparation techniques in biological samples analysis

Analysis of biological samples is affected by interfering substances with chemical properties similar to those of the target analytes, such as drugs. Biological samples such as whole blood, plasma, serum, urine and saliva must be properly processed for separation, purification, enrichment and chemical modification to meet the requirements of the analytical instruments. This causes the sample preparation stage to be of undeniable importance in the analysis of such samples through methods such as microextraction techniques. The scope of this review will cover a comprehensive summary of available literature data on microextraction techniques playing a key role for analytical purposes, methods of their implementation in common biological samples, and finally, the most recent examples of application of microextraction techniques in preconcentration of analytes from urine, blood and saliva samples. The objectives and merits of each microextration technique are carefully described in detail with respect to the nature of the biological samples. This review presents the most recent and innovative work published on microextraction application in common biological samples, mostly focused on original studies reported from 2017 to date. The main sections of this review comprise an introduction to the microextraction techniques supported by recent application studies involving quantitative and qualitative results and summaries of the most significant, recently published applications of microextracion methods in biological samples. This article considers recent applications of several microextraction techniques in the field of sample preparation for biological samples including urine, blood and saliva, with consideration for extraction techniques, sample preparation and instrumental detection systems.

Vitamin D - current stage of knowledge about analysis and supplementation

Nowadays, topics related to the proper nutrition of the body, which requires a complex of compounds and supplementation of these ingredients have undoubtedly gained popularity, so it should come as no surprise that there is a widespread interest in vitamin D in science, medicine, analytics and nutrition. In the world of developing technologies, new directions of physiological action of this vitamin on the body are being discovered. Issues related to the demand for vitamin D in various populations and its sources in food, the appropriate form of supplementation, safety and toxicity are extremely important. The present manuscript focuses on the concise evaluation of key data in the field of vitamin D. Structure and physicochemical properties, demand and delivery trails, deficiency and its diagnosis, supplementation, interactions of vitamin D with supplements and drugs are discussed. Attention has also been paid to the methods of vitamin D analysis in various matrices, which allow for an accurate and precise quality assessment of dietary supplements, drugs and food products. The presented information allows deeper understanding of the mechanisms responsible for the development of many diseases in the context of vitamin D levels.

Lyophilization as pre-processing for sample storage in the determination of vitamin D3 and metabolites in serum and plasma

Determination of vitamin D levels in human biological specimens has gained a high relevance over the last decades, essentially because low levels have been associated with several biological disorders. In fact, vitamin D deficiency has become a worldwide health concern covering all ages and genders. The storage of biofluids has to be considered for determination of vitamin D and metabolites in order to fully preserve matrices status. This study attempts to evaluate lyophilization of serum and plasma as a pre-processing step for sample storage prior to quantitative analysis of vitamin D₃ and its main hydroxylated metabolites -25(OH)D₃, 24,25(OH)₂D₃ and 1,25(OH)₂D₃. The protocol including sample lyophilization was characterized in terms of analytical features and compared to the same method, based on SPE-LC-MS/MS, without lyophilization. Sensitivity, precision and accuracy were not affected when we operated with lyophilized serum and plasma and results provided by a set of twenty-four serum samples from DEQAS (Vitamin D External Quality Assessment Scheme) were in agreement with reported concentrations for 25(OH)D₃ and 1,25(OH)₂D₃. A stability study programmed for 9 months allowed ensuring that the concentration of vitamin D₃ and metabolites in lyophilized serum and plasma stored at room temperature was not affected during this period. This research has demonstrated that the quantitation of target metabolites is not under the influence of lyophilization. Therefore, including lyophilization prior to analysis could reduce shipment and storage costs, avoid delays of sample processing, and increase the stability of the target analytes due to an effective quenching process.

A Review of Analytical Methods for Calcium Salts and Cholecalciferol in Dietary Supplements

Dietary supplements composed by the combination of a calcium salt with cholecalciferol (vitamin D₃) are widely used for improving bone health in conditions caused by the deficiency of these compounds in the body. Historically, these supplements have been linked to quality and safety issues. In the case of calcium salts, the presence of potentially toxic contaminants such as lead (Pb) has already been alerted by health authorities from different countries. Meanwhile, cholecalciferol is very unstable under inadequate manufacturing and storage conditions. The content of both compounds in commercial dietary supplements is often found to be in disagreement with the label claims, which can lead to a deficient or excessive nutrient intake by consumers. In this scenario, analyzing these compounds is still a difficult and time-consuming task, which usually requires specific pretreatment procedures and multiple analytical methods due to the inorganic nature of calcium and the organic nature of cholecalciferol. Therefore, this article reviews the analytical methods, described in official compendia and scientific literature, for the determination of calcium salts and cholecalciferol in dietary supplement formulations. We also approached the sample preparation procedures highly required due to the matrix complexity of these materials.

Vitamin D Metabolism and Profiling in Veterinary Species

The demand for vitamin D analysis in veterinary species is increasing with the growing knowledge of the extra-skeletal role vitamin D plays in health and disease. The circulating 25-hydroxyvitamin-D (25(OH)D) metabolite is used to assess vitamin D status, and the benefits of analysing other metabolites in the complex vitamin D pathway are being discovered in humans. Profiling of the vitamin D pathway by liquid chromatography tandem mass spectrometry (LC-MS/MS) facilitates simultaneous analysis of multiple metabolites in a single sample and over wide dynamic ranges, and this method is now considered the gold-standard for quantifying vitamin D metabolites. However, very few studies report using LC-MS/MS for the analysis of vitamin D metabolites in veterinary species. Given the complexity of the vitamin D pathway and the similarities in the roles of vitamin D in health and disease between humans and companion animals, there is a clear need to establish a comprehensive, reliable method for veterinary analysis that is comparable to that used in human clinical practice. In this review, we highlight the differences in vitamin D metabolism between veterinary species and the benefits of measuring vitamin D metabolites beyond 25(OH)D. Finally, we discuss the analytical challenges in profiling vitamin D in veterinary species with a focus on LC-MS/MS methods.

Improved sample preparation method for fast LC-MS/MS analysis of vitamin D metabolites in serum

Despite the fact that more than 90% of vitamin D analysis are performed using immuno-enzymatic techniques, it is liquid chromatography coupled with tandem mass spectrometry that is currently the reference method. It allows for specific and selective analysis of all relevant vitamin D metabolites from a variety of biological materials, including serum or a dried blood spot. This paper presents development of a fast, cheap and high-throughput method of serum sample preparation using protein precipitation. For this purpose, organic solvent is used. Several substances were tested, including acetonitrile, methanol and their mixtures with zinc sulfate. However, the highest recovery values for the vitamin D metabolites were obtained for acetonitrile, with an organic solvent to serum ratio of 8:1. The preparation of a sample is carried out in 96-well plates and takes an hour and a half, together with a derivatization reaction using Cookson-type reagent 4-(4'-dimethylaminophenyl)-1,2,4-triazoline-3,5-dione. Due to the fact that vitamin D metabolites are bound to proteins, the relationship between the content of organic solvent in the sample preparation process and their release from the protein complex was examined. The results indicate that the organic solvent content should be 30-70% in order to completely release the tested compounds from the proteins. In addition, the developed chromatographic method has eliminated false positive signals for the 24,25(OH)₂D₃ metabolite. Total analysis time is 5.5 min., while maintaining resolution necessary to separate the analyzed compounds.

Recent Advances in the Analysis of Vitamin D and Its Metabolites in Food Matrices

Vitamin D and its analogues are fat-soluble vitamins that carry out important functions in human and animal organisms. Many studies have pointed out the relationship between the deficiency of these substances and the development of both skeletal- and extra-skeletal diseases. Although vitamin D is fundamentally derived from the bio-transformation of its precursor, 7-dehydrocholesterol, through the action of UV-B radiation in the skin, dietary intake also plays an important role in the regulation of its status in an organism. For this reason, the application of reliable methodologies that enable monitoring the content of vitamin D and its analogues in food and supplements constitutes an aspect of special relevance to establish adequate habits, which avoid the deficiency of these substances in organisms and, consequently, the appearance of related diseases. The use of chromatographic techniques in combination with conventional and novel sample pre-treatments has become a suitable strategy to achieve this aim. This review compiles the most relevant methodologies reported in the last ten years for vitamin D analogues analysis in food matrices. Particular attention has been paid to provide a general overview of the most suitable approaches in terms of reliability, sensitivity and simplicity, used in the field of food analysis.

Differential Thermal Isomerization: Its Role in the Analysis of Vitamin D3 in Foods

Background

For nutritional purposes, the measurement of vitamin D3 (defined as the sum of vitamin D3 and previtamin D3) is required to obtain an accurate and reliable estimate of its content in foods. An often neglected aspect in the development of methods for the analysis of vitamin D3 is accounting for any potential analytical bias in the results associated with differential thermal isomerization between previtamin D and vitamin D.

Conclusions

For LC-UV methods using a vitamin D2 internal standard, cold saponification, or direct lipid extraction techniques should be avoided, unless chromatographic separation of vitamin D2, vitamin D3, and their previtamin forms is achieved so that UV absorbance corrections can be made. For both LC-UV and LC-MS methods using calciferol internal standards, the simplest solution to avoid analytical bias due to the presence of previtamin D is to utilize heating conditions (typically during saponification) such that previtamin D and vitamin D in the sample and the internal standard reach an equivalent equilibrium state prior to instrumental analysis. Only under such circumstances is the integration of previtamin D unnecessary to obtain accurate results for vitamin D3.

Highlights

A detailed discussion of the quantitation of vitamin D3 in food with concise recommendations for avoiding measurement bias as a consequence of differential thermal isomerization.