Capillary electrophoresis as a powerful tool for the analyses of bacterial samples

Isotachophoretic quantification of total viable bacteria on meat and surfaces

BACKGROUND

The quantification of microbes, particularly live bacteria, is of utmost importance in assessing the quality of meat products. In the context of meat processing facilities, prompt identification and removal of contaminated carcasses or surfaces is crucial to ensuring the continuous production of safe meat for human consumption. The plate count method and other traditional detection methods are not only labour-intensive but also time-consuming taking 24-48 h.

RESULTS

In this report, we present a novel isotachophoretic quantification method utilizing two nucleic acid stains, SYTO9 and propionic iodide, for the detection of total viable bacteria. The study employed E. coli M23 bacteria as a model organism, with an analysis time of only 30 min. The method demonstrated a limit of detection (LOD) of 184 CFU mL-1 and 14 cells mL-1 for total viable count and total cell count, respectively. Furthermore, this new approach is capable of detecting the microbial quality standard limits for food contacting surfaces (10 CFU cm-2) and meat (1.99 × 104 CFU cm-2) by swabbing an area of 10 × 10 cm2.

SIGNIFICANCE

In contrast to the culture-based methods usually employed in food processing facilities, this isotachophoretic technique enables easy and rapid detection (<30 min) of microorganisms, facilitating crucial decision-making essential for maintaining product quality and safety.

Sorting and simultaneous quantitation of intact mixed-cell samples via capillary isotachophoresis

A great need currently exists for rapid, inexpensive, and accurate methods for microbial analysis in the medical, food, industrial, and water quality fields. Here, a novel capillary isotachophoresis (CITP) method is presented for the focusing, sorting, and quantitation of intact cells in mixed samples based on their electrophoretic mobility ranges. Using a series of ion spacers dissolved in the sample, this technique results in several efficient cell peaks in the electropherogram corresponding to specific cell electrophoretic mobility ranges. The concentrations of different species in mixed-cell samples are determined from the cell peak areas and the known peak response factors for the cell species using a series of linear equations. Method design and optimization are discussed, including the choice of running buffer, pH, and ion spacers. Mixed-cell samples of up to four different species were focused and quantified as a proof-of-principle of the method. When sample cell concentrations were toward the middle of the linear response range, accuracies between 1% and 11% and relative standard deviations of 1%-14% were obtained, depending on the number of cell species in the mixture. This work provides a useful basis for future studies of cell quantitation using CITP, which could be potentially applied to a variety of fields including cell growth studies, microbial contamination testing, and sterility testing.

Nucleic acid strand displacement for indirect determination of foodborne bacteria by capillary electrophoresis and its application in antagonism and bacteriostasis studies

Foodborne bacteria threaten human's health. Capillary electrophoresis (CE) is a powerful separation means for the determination of bacteria. Direct separation of bacteria suffers from the shortages of low resolution, channel adsorption, and bacterial aggregation. In this work, a method of nucleic acid strand displacement was developed to indirect separate the bacteria by CE. DNA complexes, consisting of probes and aptamers, were mixed with the three bacteria Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The aptamers could specifically bond with bacteria and release the probes. Through the separation of the probes, the bacteria could be indirectly determined by CE. This method avoided the shortages of direct separation of bacteria. Under the optimized conditions, the three probes for the bacteria could be separated and detected within 2.5 min by high-speed CE with laser-induced fluorescence detection. The limits of detection for the bacteria were in the range 4.20 × 106 to 1.75 × 107  CFU/mL. Finally, the developed method was applied on the study of antagonism of the coexistent bacteria to reveal the relationship between them. Furthermore, the efficiency of bacteriostasis of three traditional Chinese medicines, Coptis chinensis, Schisandra chinensis, and honeysuckle, was also studied by this method.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Fractionation of bacteria by electrophoresis as pre-separation method before MALDI-MS detection

The present study attempted to apply the capillary electrophoresis technique for the fractionation and separation of S. Staphylococcus hominis and Escherichia coli bacteria isolated from urine samples and the detection of migrated fraction with spectrometric method. This involved the selection of suitable conditions for separation as well as the identification of pathogens. The result of the research was the separation of Gram-negative and Gram-positive bacteria, as well as their subsequent identification by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using two different approaches (culture of fractions on an agar plate and direct analysis of the collected fractions). The preliminary results provide a solid basis for further research on the use of electromigration techniques with LDI detection to identify pathogens such as bacteria and viruses in biological samples.

Determination of Pathogens by Electrophoretic and Spectrometric Techniques

In modern medical diagnostics, where analytical chemistry plays a key role, fast and accurate identification of pathogens is becoming increasingly important. Infectious diseases pose a growing threat to public health due to population growth, international air travel, bacterial resistance to antibiotics, and other factors. For instance, the detection of SARS-CoV-2 in patient samples is a key tool to monitor the spread of the disease. While there are several techniques for identifying pathogens by their genetic code, most of these methods are too expensive or slow to effectively analyze clinical and environmental samples that may contain hundreds or even thousands of different microbes. Standard approaches (e.g., culture media and biochemical assays) are known to be very time- and labor-intensive. The purpose of this review paper is to highlight the problems associated with the analysis and identification of pathogens that cause many serious infections. Special attention was paid to the description of mechanisms and the explanation of the phenomena and processes occurring on the surface of pathogens as biocolloids (charge distribution). This review also highlights the importance of electromigration techniques and demonstrates their potential for pathogen pre-separation and fractionation and demonstrates the use of spectrometric methods, such as MALDI-TOF MS, for their detection and identification.

Current Role of Modern Chromatography with Mass Spectrometry and Nuclear Magnetic Resonance Spectroscopy in the Investigation of Biomarkers of Endometriosis

Endometriosis has a wide range of clinical manifestations, and the disease course is unpredictable, making the diagnosis a challenging task. Despite significant advances in the pathophysiology of endometriosis and various proposed theories, the exact etiology is not fully understood and is still unknown. The most commonly used biomarker of endometriosis is CA-125, however, it is nonspecific and is applied for cancers diagnosis. Therefore, the development of reliable noninvasive diagnostic tests for the early diagnosis of endometriosis remains one of the top priorities. Omics technologies are very promising approaches for constructing diagnostic models and biomarker discovery. Their use can greatly facilitate the study of such a complex disease as endometriosis. Nowadays, powerful analytical platforms commonly used in omics, such as gas and liquid chromatography with mass spectrometry and nuclear magnetic resonance (NMR) spectroscopy, have proven to be a promising tools for biomarker discovery. The aim of this review is to summarize the various features of the analytical approaches, practical challenges and features of gas and liquid chromatography with MS and NMR spectroscopy (including sample processing protocols, technological advancements, and methodology) used for profiling of metabolites, lipids, peptides and proteins in physiological fluids and tissues from patients with endometriosis. In addition, this report devotes special attention to the issue of how comprehensive analyses of these profiles can effectively contribute to the study of endometriosis. The search query included reports published between 2012 and 2022 years in PubMed, Web-of-Science, SCOPUS, Science Direct.

Design of experiment techniques for the optimization of chromatographic analysis conditions: A review

Design of experiment (DoE) techniques have been widely used in the field of chromatographic parameters optimization as a valuable tool. A systematic literature review of the available DoE techniques applied to the development of a chromatographic analysis method is presented in this paper. First, the most common available designs and the implementation steps of DoE are comprehensively introduced. Then the studies in recent 10 years for the application of DoE techniques in various chromatographic techniques are discussed, such as capillary electrophoresis, liquid chromatography, gas chromatography, thin-layer chromatography, and high-speed countercurrent chromatography. Current problems and future outlooks are finally given to provide a certain inspiration of research in the application of DoE techniques to the different chromatographic techniques field. This review contributes to a better understanding of the DoE techniques for the efficient optimization of chromatographic analysis conditions, especially for the analysis of complex systems, such as multicomponent drugs and natural products.

Detection of Biosignatures by Capillary Electrophoresis Mass Spectrometry in the Presence of Salts Relevant to Ocean Worlds Missions

Capillary electrophoresis (CE) is a promising liquid-based technique for in situ chemical analysis on ocean worlds that allows the detection of a wide range of organic molecules relevant to the search for life. CE coupled with mass spectrometry (MS) is particularly valuable as it also enables the discovery of unknown compounds. Here we demonstrate that CE coupled to MS via electrospray ionization (ESI) can readily analyze samples containing up to half the saturation levels of salts relevant to ocean worlds when using 5 M acetic acid as the separation media. A mixture containing amino acids, peptides, nucleobases, and nucleosides was analyzed in the presence of two salts, NaCl and MgSO₄, based on their relevance to Europa and Enceladus. We demonstrate here CE-MS limits of detection for these organics ranging from 0.05 to 1 μM (8 to 89 ppb) in the absence of salts. More importantly, we demonstrate here for the first time that organics in the low micromolar range (1-50 μM) are detected by CE-MS in the presence of 3 M NaCl without desalting, preconcentration, or derivatization. This demonstration highlights how CE-MS is uniquely suited for organic analysis on future missions to ocean worlds.

Annual review of capillary electrophoresis technology in 2021

该文为2021年毛细管电泳(capillary electrophoresis, CE)技术年度回顾。归纳总结了以“capillary electrophoresis-mass spectrometry”或“capillary isoelectric focusing”或“micellar electrokinetic chromatography”或“capillary electrophoresis”为关键词在ISI Web of Science数据库中进行主题检索(排除“capillary electrochromatography”“microchip”和“capillary monolithic column”)得到的2021年CE技术相关研究论文291篇,以及中文期刊《色谱》和《分析化学》中相关研究论文9篇。重点介绍了影响因子(IF)≥10.0的Coordination Chemistry Reviews, Angewandte Chemie-International Edition, Nature Protocols, TrAC-Trends in Analytical Chemistry, Signal Transduction and Targeted Therapy发表的7篇论文;以及影响因子5~10之间的代表性期刊Analytical Chemistry, Analytica Chimica Acta, Talanta和Food Chemistry的42篇论文;对影响因子小于5但CE技术报道较为集中的Journal of Chromatography A和Electrophoresis,国内重要的中文期刊《色谱》和《分析化学》中的代表性工作进行了概述。该文根据国际通用学术水平评价指标之一的影响因子选择期刊,结合期刊发表CE论文代表性工作进行介绍,便于读者快速了解毛细管电泳技术在过去一年的重要研究进展。

Microfluidic Sampling and Biosensing Systems for Foodborne Escherichia coli and Salmonella

Developments of portable biosensors for field-deployable detections have been increasingly important to control foodborne pathogens in regulatory environment and in early stage of outbreaks. Conventional cultivation and gene amplification methods require sophisticated instruments and highly skilled professionals; while portable biosensing devices provide more freedom for rapid detections not only in research laboratories but also in the field; however, their sensitivity and specificity are limited. Microfluidic methods have the advantage of miniaturizing instrumental size while integrating multiple functions and high-throughput capability into one streamlined system at low cost. Minimal sample consumption is another advantage to detect samples in different sizes and concentrations, which is important for the close monitoring of pathogens at consumer end. They improve measurement or manipulation of bacteria by increasing the ratio of functional interface of the device to the targeted biospecies and in turn reducing background interference. This article introduces the major active and passive microfluidic devices that have been used for bacteria sampling and biosensing. The emphasis is on particle-based sorting/enrichment methods with or without external physical fields applied to the microfluidic devices and on various biosensing applications reported for bacteria sampling. Three major fabrication methods for microfluidics are briefly discussed with their advantages and limitations. The applications of these active and passive microfluidic sampling methods in the past 5 years have been summarized, with the focus on Escherichia coli and Salmonella. The current challenges to microfluidic bacteria sampling are caused by the small size and nonspherical shape of various bacterial cells, which can induce unpredictable deviations in sampling and biosensing processes. Future studies are needed to develop rapid prototyping methods for device manufacturing, which can facilitate rapid response to various foodborne pathogen outbreaks.

An overview of the methods for analyzing the chemical forms of metals in plants

Currently, the occurrence of toxic levels of metals in soils is a serious environmental issue worldwide. Phytoremediation is getting much attention to control metals soil pollution because it is economic and environmentally friendly. However, the methods used to detect metals in plants are not uniform and have depicted poor comparability of the research investigations. Therefore, the present overview is designed to discuss the possible chemical forms of metals in various environmental matrixes and the detection methods employed to identify the chemical forms of metals in plants. Moreover, the in situ and indirect methods to detect metals in plants have also been discussed herein. In addition, the pros and cons of the available techniques have also been critically analyzed and discussed. Finally, key points/challenges and future perspectives of these methods have been highlighted for the scientific community.Novelty statementIn the current review, the possible chemical forms of metals in various environmental matrixes are discussed in detail. Various extraction agents and their efficiency for extracting metals from plants have been clearly illustrated. Further, all the available methods for analyzing the chemical forms of metals in plants have been compared.

Polymer Surface Dissection for Correlated Microscopic and Compositional Analysis of Bacterial Aggregates during Membrane Biofouling

Multispecies biofilms are a common limitation in membrane bioreactors, causing membrane clogging, degradation, and failure. There is a poor understanding of biological fouling mechanisms in these systems due to the limited number of experimental techniques useful for probing microbial interactions at the membrane interface. Here, we develop a new experimental method, termed polymer surface dissection (PSD), to investigate multispecies assembly processes over membrane surfaces. The PSD method uses photodegradable polyethylene glycol hydrogels functionalized with bioaffinity ligands to bind and detach microscale, microbial aggregates from the membrane for microscopic observation. Subsequent exposure of the hydrogel to high resolution, patterned UV light allows for controlled release of any selected aggregate of desired size at high purity for DNA extraction. Follow-up 16S community analysis reveals aggregate composition, correlating microscopic images with the bacterial community structure. The optimized approach can isolate aggregates with microscale spatial precision and yields genomic DNA at sufficient quantity and quality for sequencing from aggregates with areas as low as 2000 μm², without the need of culturing for sample enrichment. To demonstrate the value of the approach, PSD was used to reveal the composition of microscale aggregates of different sizes during early-stage biofouling of aerobic wastewater communities over PVDF membranes. Larger aggregates exhibited lower diversity of bacterial communities, and a shift in the community structure was found as aggregate size increased to areas between 25,000 and 45,000 μm², below which aggregates were more enriched in Bacteroidetes and above which aggregates were more enriched with Proteobacteria. The findings demonstrate that community succession can be observed within microscale aggregates and that the PSD method is useful for identification and characterization of early colonizing bacteria that drive biofouling on membrane surfaces.

Enzymatic hydrolysis and microbial fermentation: The most favorable biotechnological methods for the release of bioactive peptides

•

Peptide release methods influence its bioactivity by generating different sequences.

•

The absorption, toxicity and taste of peptides is influenced by the production method.

•

The most used methods are enzymatic hydrolysis and microbial fermentation.

•

The most used methods are biotechnological and differ in their process.

Bioactive peptides are biomolecules derived from proteins. They contain anywhere from 2 to 20 amino acids and have different bioactivities. For example, they have antihypertensive activity, antioxidant activity, antimicrobial activity, etc. However, bioactive peptides are encrypted and inactive in the parental protein, so it is necessary to release them to show their bioactivity. For this, there are different methods, where biotechnological methods are highly favorable, highlighting enzymatic hydrolysis and microbial fermentation.

The choice of the method to be used depends on different factors, which is why it is essential to know about the process, its principle, and its advantages and disadvantages. The process of peptide release is critical to generate various peptide sequences, which will produce different biological effects in the hydrolysate. This review focuses on providing extensive information on the enzymatic method and microbial fermentation to facilitate selecting the method that provides the most benefits.

Microscale electrokinetic-based analysis of intact cells and viruses

Miniaturized electrokinetic methods have proven to be robust platforms for the analysis and assessment of intact microorganisms, offering short response times and higher integration than their bench-scale counterparts. The present review article discusses three types of electrokinetic-based methodologies: electromigration or motion-based techniques, electrode-based electrokinetics, and insulator-based electrokinetics. The fundamentals of each type of methodology are discussed and relevant examples from recent reports are examined, to provide the reader with an overview of the state-of-the-art on the latest advancements on the analysis of intact cells and viruses with microscale electrokinetic techniques. The concluding remarks discuss the potential applications and future directions.

Modern Analytical Techniques for Detection of Bacteria in Surface and Wastewaters

Contamination of surface waters with pathogens as well as all diseases associated with such events are a significant concern worldwide. In recent decades, there has been a growing interest in developing analytical methods with good performance for the detection of this category of contaminants. The most important analytical methods applied for the determination of bacteria in waters are traditional ones (such as bacterial culturing methods, enzyme-linked immunoassay, polymerase chain reaction, and loop-mediated isothermal amplification) and advanced alternative methods (such as spectrometry, chromatography, capillary electrophoresis, surface-enhanced Raman scattering, and magnetic field-assisted and hyphenated techniques). In addition, optical and electrochemical sensors have gained much attention as essential alternatives for the conventional detection of bacteria. The large number of available methods have been materialized by many publications in this field aimed to ensure the control of water quality in water resources. This study represents a critical synthesis of the literature regarding the latest analytical methods covering comparative aspects of pathogen contamination of water resources. All these aspects are presented as representative examples, focusing on two important bacteria with essential implications on the health of the population, namely Pseudomonas aeruginosa and Escherichia coli.

Study of antagonism between some intestinal bacteria with high-speed micellar electrokinetic chromatography

In this work, high-speed micellar electrokinetic chromatography with LIF detection was applied to study the antagonism between three intestinal bacteria, Escherichia coli (E. coli), Bacillus licheniformis (B. licheniformis) and Bacillus subtilis (B. subtilis). The fluorescent derivatization for the bacteria was performed by labeling the bacteria with FITC. In a high-speed capillary electrophoresis (HSCE) device, the three bacteria could be completely separated within 4 min under the separation mode MEKC. The BGE was 1 × TBE containing 30 mM SDS and 1.5 × 10^-5  g/mL polyethylene oxide. The limits of detection for E. coli, B. licheniformis and B. subtilis were 2.80 × 10⁶ CFU/mL, 1.60 × 10⁶ CFU/mL and 1.90 × 10⁶ CFU/mL respectively. Lastly, the method was applied to investigate the antagonism between the three bacteria. The bacteria were mixed and cultured for 7 days. The samples were separated and determined every day to study the interaction between bacteria. The results showed that B. licheniformis and B. subtilis could not inhibit each other, but they could effectively inhibit the reproduction of E. coli. The method developed in this work was quick, sensitive and convenient, and it had great potential in the application of antagonism study for bacteria.