Ultrasound assisted synthesis of Ag-decorated TiO2 active in visible light

Visible-light-activated antibacterial and antipollutant properties of biocompatible Cu-doped and Ag-decorated TiO2 nanoparticles

Optical and photocatalytic restrictions of anatase TiO2 nanoparticles (Nps) limit their potential applications, as antipollutant and antibacterial agents for sanitary applications, to the UV spectral region. While modification with transition metals extends the absorption capacity to the visible light spectrum, often undermines the photocatalysts' biocompatibility due to toxic ion leaching. In this study, we synthesized Cu-doped and Ag-decorated TiO2 photocatalysts by employing solvothermal (ATiO2:Cu) and sol-gel synthetic procedures (BTiO2:Ag), respectively. We acquired TiO2 Nps modified with three percentages of either Cu or Ag content, to examine the potential differentiation of their structural, photocatalytic, and biological impact. Comprehensive structural characterization supports the prevailing anatase crystalline structure of bare and modified titania nanostructures, while morphological differences are demonstrated among the different samples. Optical response in the visible region of ATiO2:Cu Nps stems from band gap narrowing and lattice-defect generation, while plasmonic effects are at play for BTiO2:Ag Nps. Their photocatalytic potential under visible light irradiation, originated from low-energy LED lamps commonly found in indoor spaces, was verified after monitoring the successful enhancement of methylene blue (MB) degradation rate. Safety assessment on immortalized healthy human keratinocyte cell line (HaCaT) revealed their biocompatibility up to a certain concentration, while reactive oxygen species (ROS) production was intensified after light irradiation. The visible-light-induced photocatalytic-driven antibacterial activity was confirmed against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli.

Multicomponent Photocatalytic-Dispersant System for Oil Spill Remediation

In the present work, the potential application of a fabricated halloysite nanotubes-Ag-TiO2 (HNT-Ag-TiO2) composite loaded with a binary surfactant mixture made up of lecithin and Tween 80 (LT80) in remediating oil spillages was examined. The as-prepared Ag-TiO2 that was used in the fabrication of the HNT-Ag-TiO2-LT80 composite was characterized by X-ray diffraction, Raman spectroscopy, UV-vis and diffuse reflectance spectroscopy, CV analyses, and SEM-EDX. The synthesized composite was also characterized by thermogravimetric analysis, Fourier-transform infrared spectroscopy, and scanning electron microscopy-energy dispersive X-ray spectroscopy. The synthesized composite was active in both the UV and visible light regions of the electromagnetic spectrum. The oil-remediating potential of the as-prepared composite was examined on crude oil, and aromatics and asphaltene fractions of crude oil. The composite was able to reduce the surface tension, form stable emulsions and smaller oil droplet sizes, and achieve a high dispersion effectiveness of 91.5%. A mixture of each of the crude oil and its fractions and HNT-Ag-TiO2-LT80 was subjected to photodegradation under UV light irradiation. The results from the GC-MS and UV-vis analysis of the photodegraded crude oil revealed that the photocatal composite was able to photodegrade the crude oil, aromatics, and asphaltene fractions of crude oil with the formation of intermediate photodegradation products depicting that the HNT-Ag-TiO2-LT80 has a potential as an oil spill remediation material.

Well-dispersed titanium dioxide and silver nanoparticles on external and internal surfaces of asymmetric alumina hollow fibers for enhanced chromium (VI) photoreductions

Heterogenous photocatalysis is a suitable alternative for wastewater treatment. The supporting of the solid catalyst in a porous material is suggested to facilitate catalyst recovery and reuse. Here we propose for the first time the evaluation of supporting silver (Ag)-decorated titanium dioxide (TiO₂) catalysts on internal and external surfaces of alumina hollow fibers with asymmetric pore size distribution. The produced catalysts were considered for Cr(VI) photoreductions. The ultrasound-assisted process potentialized the distribution of Ag nanoparticles on the TiO₂ surface. The loading of Ag nanoparticles at concentrations greater than 5 wt% was necessary to improve the TiO₂ activity for Cr(VI) photoreduction. The loading of Ag nanoparticles at 30 wt% improved the Cr(VI) photoreduction of the single TiO₂ catalyst from 40.49 ± 0.98 to 55.00 ± 0.83% after 180 min of reaction. Suspended and supported Ag-decorated TiO₂ catalysts achieved total Cr(VI) photoreduction after 21 h of reaction. The adjusted reaction rate constant with the externally supported Ag-TiO₂ catalyst was 3.57 × 10^-3 ± 0.18 × 10^-3 min^-1. Similar reaction rate constants were achieved with suspended and internally supported catalysts (approximately 2.70 × 10^-3 min^-1). After 10 sequential reuses, all catalysts presented similar Cr(VI) photoreductions of approximately 66%. Nevertheless, the use of the externally supported catalyst is suggested for Cr(VI) photoreductions due to its superior catalyst activity at least in the first reuse cycles.

Engineering Heterostructures of Layered Double Hydroxides and Metal Nanoparticles for Plasmon-Enhanced Catalysis

Artificially designed heterostructures formed by close conjunctions of plasmonic metal nanoparticles (PNPs) and non-plasmonic (2D) lamellar nanostructures are receiving extensive interest. The synergistic interactions of the nanounits induce the manifestation of localized surface plasmon resonance (LSPR) in plasmonic metals in the specific environment of the 2D-light absorbing matrix, impacting their potential in plasmon enhanced catalysis. Specifically, layered double hydroxides (LDH) with the advantages of their unique 2D-layered structure, tuned optical absorption, ease of preparation, composition diversity, and high surface area, have emerged as very promising candidates for obtaining versatile and robust catalysts. In this review, we cover the available PNPs/LDH heterostructures, from the most used noble-metals plasmonic of Au and Ag to the novel non-noble-metals plasmonic of Cu and Ni, mainly focusing on their synthesis strategies toward establishing a synergistic response in the coupled nanounits and relevant applications in plasmonic catalysis. First, the structure–properties relationship in LDH, establishing the desirable features of the 2D-layered matrix facilitating photocatalysis, is shortly described. Then, we address the recent research interests toward fabrication strategies for PNPs/support heterostructures as plasmonic catalysts. Next, we highlight the synthesis strategies for available PNPs/LDH heterostructures, how these are entangled with characteristics that enable the manifestation of the plasmon-induced charge separation effect (PICS), co-catalytic effect, or nanoantenna effect in plasmonic catalysis with applications in energy related and environmental photocatalysis. Finally, some perspectives on the challenges and future directions of PNPs/LDHs heterostructures to improve their performance as plasmonic catalysts are discussed.

Sustainable Solar Light Photodegradation of Diclofenac by Nano- and Micro-Sized SrTiO3

Currently, photocatalytic reactions under solar illumination have attracted worldwide attention due to the tremendous set of associated environmental problems. Taking sunlight into account, it is indispensable to develop highly effective photocatalysts. Strontium titanate, SrTiO3 (STO), is a cubic perovskite-type semiconductor, an inexpensive material with high thermal stability and corrosion resistance that exhibits a similar energy bandgap to TiO2 and can represent an interesting alternative in photocatalytic applications. Particle size can significantly affect both photocatalytic and photoelectrochemical properties of a photocatalyst, thus altering the photooxidation of organic pollutants in air or water. In this context, this research aims at investigating the photocatalytic features of nano- and micro-sized commercial STO powders towards the photodegradation of diclofenac (DFC), a non-steroidal, anti-inflammatory drug, widely used as analgesic, antiarthritic, and antirheumatic. Both nano- and micro-STO photocatalysts exhibited remarkable photocatalytic efficiency towards DCF, reaching photodegradation efficiency higher than 90% within one hour. Results obtained in simulated drinking water were also compared to those obtained in ultrapure water. Both STOs showed good stability during recycling tests, maintaining high performances after three cycles. Eventually, active species were identified using various scavengers by trapping holes and radicals generated during the photocatalytic degradation process.

Ag Decoration and SnO2 Coupling Modified Anatase/Rutile Mixed Crystal TiO2 Composite Photocatalyst for Enhancement of Photocatalytic Degradation towards Tetracycline Hydrochloride

The anatase/rutile mixed crystal TiO2 was prepared and modified with Ag decoration and SnO2 coupling to construct a Ag@SnO2/anatase/rutile composite photocatalytic material. The crystal structure, morphology, element valence, optical properties and surface area were characterized, and the effects of Ag decoration and SnO2 coupling on the structure and photocatalytic properties of TiO2 were studied. Ag decoration and SnO2 coupling are beneficial to reduce the recombination of photogenerated electrons and holes. When the two modification are combined, a synergistic effect is produced in suppressing the photogenerated charge recombination, making Ag@SnO2/TiO2 exhibits the highest quantum utilization. After 30 min of illumination, the degradation degree of tetracycline hydrochloride (TC) by pure TiO2 increased from 63.3% to 83.1% with Ag@SnO2/TiO2.

Noble Metal Promoted TiO2 from Silver-Waste Valorisation: Synergism between Ag and Au

Wastewaters from precious metal industries contain high amounts of noble metals, but their efficient recycling is hindered by the wastewater complex composition. Here, we propose an innovative approach for the efficient recovery of noble metals contained in these metal-enriched wastewaters as precursors for the synthesis of noble metal nanoparticles (NPs) and supported metal catalysts. Silver NPs were synthesized from Ag-enriched wastewater and then deposited on TiO2 to prepare photocatalysts. Then, further promotion of the photocatalytic activity of Ag-modified TiO2 was achieved by the addition of as little as 0.5 wt.% of Au. STEM-EDS analyses proved that Au NPs were located on Ag or AgOx nanoparticles. The contact between the two metal-containing NPs results in charge transfer effects, appreciable both in terms of oxidation states determined by XPS and of optical properties. In particular, the plasmon band of Au NPs shows photochromic effects: under UV light irradiation, bimetallic samples exhibit a blue-shift of the plasmon band, which is reversible under dark storage. The activity of the materials was tested towards ethanol photodegradation under UV light. Adding 0.5 wt.% Au NPs resulted in a promoted activity compared to Ag-TiO2, thus showing synergistic effects between Au and Ag. Ethanol was completely converted already after 1 h of UV irradiation, acetaldehyde was formed as the main oxidation product and fully degraded in less than 180 min. Notably, bimetallic samples showed ethylene formation by a parallel dehydration mechanism.

Tunable TiO2-BN-Pd nanofibers by combining electrospinning and atomic layer deposition to enhance photodegradation of acetaminophen

The demand for fresh and clean water sources is increasing globally, and there is a need to develop novel routes to eliminate micropollutants and other harmful species from water. Photocatalysis is a promising alternative green technology that has shown great performance in the degradation of persistent pollutants. Titanium dioxide is the most used catalyst owing to its attractive physico-chemical properties, but this semiconductor presents limitations in the photocatalysis process due to the high band gap and the fast recombination of the photogenerated carriers. Herein, a novel photocatalyst has been developed, based on titanium dioxide nanofibers (TiO2 NFs) synthesized by electrospinning. The TiO2 NFs were coated by atomic layer deposition (ALD) to grow boron nitride (BN) and palladium (Pd) on their surface. The UV-Vis spectroscopy measurements confirmed the increase of the band gap and the extension of the spectral response to the visible range. The obtained TiO2/BN/Pd nanofibers were then tested for photocatalysis, and showed a drastic increase of acetaminophen (ACT) degradation (>90%), compared to only 20% degradation obtained with pure TiO2 after 4 h of visible light irradiation. The high photocatalytic activity was attributed to the good dispersion of Pd NPs on TiO2-BN nanofibers, leading to a higher transfer of photoexcited hole carriers and a decrease of photogenerated electron-charge recombination. To confirm its reusability, recycling tests on the hybrid photocatalyst TiO2/BN/Pd have been performed, showing a good stability over 5 cycles under UV and visible light. In addition, toxicity tests as well as quenching tests were carried out to check the toxicity of the byproducts formed and to determine active species responsible for the degradation. The results presented in this work demonstrate the potential of TiO2/BN/Pd nanomaterials, and open new prospects for the preparation of tunable photocatalysts.

TiO2 treatment using ultrasonication for bubble cavitation generation and efficiency assessment of a dye-sensitized solar cell

In this study, the impacts of different ultrasonic treatments on TiO₂ particles were determined and they were used to manufacture the photoelectrodes of a dye-sensitized solar cell (DSSC). Two methods were used to prepare TiO₂ particles directly sonicated by an ultrasonic horn, and TiO₂ treated indirectly by an ultrasonic cleaner. TEM, XPS analysis was confirmed that cavitation bubbles generated during ultrasonication resulted in defects on the surface of TiO₂ particles, and the defect induced surface activation. To understand the effect of TiO₂ surface activation on energy conversion efficiency of DSSC, ultrasonic horn DSSC and ultrasonic cleaner DSSC were prepared. The UV-vis analysis exhibited that the ultrasonic horn DSSC possessed higher dye adsorption when compared to the ultrasonic cleaner DSSC, and the EIS analysis confirmed that the electron mobility was greatly increased in the ultrasonic horn DSSC. The energy conversion efficiency of the ultrasonic horn DSSC was measured to be 3.35%, which is about 45% increase in comparison to that of the non-ultrasonic treated DSSC (2.35%). In addition to this regard, recombination resistance of ultrasonic horn DSSC was calculated to be 450 Ω·cm², increasing more than two times compared to the non-ultrasonic treated DSSC (200 Ω·cm²). Taken together, these ultrasonic treatments significantly improved the energy conversion efficiency of DSSC, which was not tried in DSSC-related research, and might lead us to develop more efficient practical route in the manufacturing of DSSC.

Key Points of Advanced Oxidation Processes (AOPs) for Wastewater, Organic Pollutants and Pharmaceutical Waste Treatment: A Mini Review

Advanced oxidation procedures (AOPs) refer to a variety of technical procedures that produce OH radicals to sufficiently oxidize wastewater, organic pollutant streams, and toxic effluents from industrial, hospital, pharmaceutical and municipal wastes. Through the implementation of such procedures, the (post) treatment of such waste effluents leads to products that are more susceptible to bioremediation, are less toxic and possess less pollutant load. The basic mechanism produces free OH radicals and other reactive species such as superoxide anions, hydrogen peroxide, etc. A basic classification of AOPs is presented in this short review, analyzing the processes of UV/H2O2, Fenton and photo-Fenton, ozone-based (O3) processes, photocatalysis and sonolysis from chemical and equipment points of view to clarify the nature of the reactive species in each AOP and their advantages. Finally, combined AOP implementations are favored through the literature as an efficient solution in addressing the issue of global environmental waste management.

Silver-titanium polymeric nanocomposite non ecotoxic with bactericide activity

In view of the intense interest in applications of silver nanoparticles in products for the medical field and in food preservation packaging due to their antimicrobial properties, the ecotoxicology of silver nanocomposites was evaluated in films. Test with the sea urchin Echinometra lucunter, to evaluate embryonic development and contamination by the action of silver and titanium nanoparticles in polyethylene nanocomposite films presents new results. The silver nanoparticle’s stability in polymeric materials can be enhanced by adding carriers, such as titanium dioxide and montmorillonite clay (MMT) without to producing one unfriendly material. For this research, low-density polyethylene (LDPE)/linear low-density polyethylene (LLDPE) were used processed in a twin-screw extruder, followed by gamma irradiation with 25 kGy and characterized by ecotoxicology assays, field emission scanning electron microscopy (FESEM), scanning electron microscopy and energy dispersive spectroscopy (SEM–EDX), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), Raman spectroscopy (SERS) and mechanical properties. The antibacterial properties of the LDPE films were investigated against Escherichia coli and Staphylococcus aureus. The gamma irradiation had an important effect in the synthesis of silver nanoparticles resulting in bactericidal activity and the death of 100% of the tested bacteria. The evaluation of the environment was considered with the ecotoxicological investigation carried out. The results indicated that the polymeric films with silver nanoparticles and TiO₂ do not contaminate the environment and neither interfere with the larval development of Echinometra lucunter. The obtained materials can be used in various applications with antimicrobial properties.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Sonoprocessing: From Concepts to Large-Scale Reactors

Intensification of ultrasonic processes for diversified applications, including environmental remediation, extractions, food processes, and synthesis of materials, has received attention from the scientific community and industry. The mechanistic pathways involved in intensification of ultrasonic processes that include the ultrasonic generation of cavitation bubbles, radical formation upon their collapse, and the possibility of fine-tuning operating parameters for specific applications are all well documented in the literature. However, the scale-up of ultrasonic processes with large-scale sonochemical reactors for industrial applications remains a challenge. In this context, this review provides a complete overview of the current understanding of the role of operating parameters and reactor configuration on the sonochemical processes. Experimental and theoretical techniques to characterize the intensity and distribution of cavitation activity within sonoreactors are compared. Classes of laboratory and large-scale sonoreactors are reviewed, highlighting recent advances in batch and flow-through reactors. Finally, examples of large-scale sonoprocessing applications have been reviewed, discussing the major scale-up and sustainability challenges.

Study on the influence of advanced treatment processes on the surface properties of polylactic acid for a bio-based circular economy for plastics

New biotechnological processes using microorganisms and/or enzymes to convert carbonaceous resources, either biomass or depolymerized plastics into a broad range of different bioproducts are recognized for their high potential for reduced energy consumption and reduced GHG emissions. However, the hydrophobicity, high molecular weight, chemical and structural composition of most of them hinders their biodegradation. A solution to reduce the impact of non-biodegradable polymers spread in the environment would be to make them biodegradable. Different approaches are evaluated for enhancing their biodegradation. The aim of this work is to develop and optimize the ultrasonication (US) and UV photodegradation and their combination as well as dielectric barrier discharge (DBD) plasma as pre-treatment technologies, which change surface properties and enhance the biodegradation of plastic by surface oxidation and thus helping bacteria to dock on them. Polylactic acid (PLA) has been chosen as a model polymer to investigate its surface degradation by US, UV, and DBD plasma using surface characterization methods like X-ray Photoelectron Spectroscopy (XPS) and Confocal Laser Microscopy (CLSM), Atomic Force Microscopy (AFM) as well as FT-IR and drop contour analysis. Both US and UV affect the surface properties substantially by eliminating the oxygen content of the polymer but in a different way, while plasma oxidizes the surface.

Improved photocatalytic oxidation performance of gaseous acetaldehyde by ternary g-C3N4/Ag-TiO2 composites under visible light

In the process of photocatalytic oxidation (PCO), titanium dioxide (TiO₂) shows excellent capabilities. However, when TiO₂ is used to remove volatile organic compounds (VOCs), there are some drawbacks including weak adsorption of gaseous contaminants, insufficient utilization of sunlight, and rapid recombination of photogenerated carriers. Herein, a TiO₂-based ternary heterogeneous photocatalyst, g-C₃N₄/Ag-TiO₂, was successfully fabricated to photodegrade gaseous acetaldehyde (one of the representatives of oxygenated VOCs) under visible light. Among the various samples, the g-C₃N₄/50 wt% Ag-TiO₂ exhibited an excellent photocatalytic activity, which was 5.8 times of bare TiO₂. The mineralization efficiency of acetaldehyde was also increased by 3.7 times compared to bare TiO₂. The substantial improvement in the PCO performance of the ternary system can be associated with the good adsorption to acetaldehyde gas and light-harvesting capability, as well as improved charge separation process. The application of Langmuir-Hinshelwood kinetic model suggested that relative humidity played a significant role in the VOCs degradation. Also, the photodegradation of gaseous acetaldehyde primarily occurred on the catalysts surface. Based on several characterizations, i.e., UV-vis spectroscopy, photoluminescence spectrum, photocurrent spectroscopy and electron spin-resonance test, a suitable degradation mechanism is proposed. This study provides a novel ternary photocatalyst with improved photocatalytic performance and stability, which can be used for the low-concentration VOCs abatement in the indoor environment.

Synergetic decolorization of azo dyes using ultrasounds, photocatalysis and photo-fenton reaction

In the present work, ultrasound irradiation, photocatalysis with TiO₂, Fenton/Photo-Fenton reaction, and the combination of those techniques were investigated for the decolorization of industrial dyes in order to study their synergy. Three azo dyes were selected from the weaving industry. Their degradation was examined via UV illumination, Fenton and Photo-Fenton reaction as well as ultrasound irradiation at low (20 kHz) and high frequencies (860 kHz). In these experiments, we investigated the simultaneous action of the ultrasound and UV irradiation by varying parameters like the duration of photocatalysis and ultrasound irradiation frequency. At the same time, US power, temperature, amount of TiO₂ photocatalyst and amount of Fenton reagent remained constant. Due to their diverse structure, each azo dye showed different degradation levels using different combinations of the above-mentioned Advanced Oxidation Processes (AOPs). The Photo-Fenton reagent is more effective with US 20 kHz and US 860 kHz for the azo dyes originated from the weaving industry at pH = 3 as compared to pH = 6.8. The combination of the Photo-Fenton reaction with 860 kHz ultrasound irradiation for the same dye gave an 80% conversion at the same time. Experiments have shown a high activity during the first two hours. After that threshold, the reaction rate is decreased. FT-IR and TOC measurements prove the decolorization due to the destruction of the chromophore groups but not complete mineralization of the dyes.

Sonochemical fabrication of inorganic nanoparticles for applications in catalysis

Catalysis covers almost all the chemical reactions or processes aiming for many applications. Sonochemistry has emerged in designing and developing the synthesis of nano-structured materials, and the latest progress mainly focuses on the synthetic strategies, product properties as well as catalytic applications. This current review simply presents the sonochemical effects under ultrasound irradiation, roughly describes the ultrasound-synthesized inorganic nano-materials, and highlights the sonochemistry applications in the inorganics-based catalysis processes including reduction, oxidation, degradation, polymerization, etc. Or all in all, the review hopes to provide an integrated understanding of sonochemistry, emphasize the great significance of ultrasound-assisted synthesis in structured materials as a unique strategy, and broaden the updated applications of ultrasound irradiation in the catalysis fields.

TiO2 Doped with Noble Metals as an Efficient Solution for the Photodegradation of Hazardous Organic Water Pollutants at Ambient Conditions

This work highlights new insights into the performance of TiO2 doped with noble metal catalysts for the photocatalytic degradation of organic water pollutants. Different samples of titanium dioxide doped with noble metals (Au and Pd) were successfully synthesized via incipient wet impregnation (IWI) and ultrasound-assisted impregnation (US) methods. X-ray diffraction, scanning electron microscopy and UV-Vis reflectance spectroscopy were used for the characterization of the obtained materials. Their photocatalytic efficiency was investigated in aqueous suspension thorough a series of laboratory tests performed under ultraviolet (UV-A) irradiation conditions using 2,4 dinitrophenol (2,4 DNP) as a target molecule. The results clearly show that the method used for the catalyst synthesis affects its photocatalytic activity. It was found that the samples prepared by the IWI method exhibited high photocatalytic activity, and the removal rate obtained with TiO2-Pd/IWI was higher than that found for TiO2-Au/IWI. Furthermore, for the best catalyst, some extra photocatalytic experiments were conducted with rhodamine 6G (R6G), a highly stable molecule with a very different chemical structure to 2,4 DNP, in order to check the reactivity of this material. Moreover, the recycling experiments carried out with TiO2-Pd/IWI clearly demonstrated the high photocatalytic stability of this material for the degradation of 2,4 DNP. All of the collected data confirmed the interesting photocatalytic potential of the selected catalyst in the elimination of organic pollutants with no obvious change in its reactivity after four reaction cycles, which is very promising for promoting future applications in water depollution.

Sonophotocatalytic degradation of sodium diclofenac using low power ultrasound and micro sized TiO2

The nonsteroidal anti-inflammatory drug sodium diclofenac (DC) is an emerging water pollutant which resists conventional wastewater treatments. Here the sonophotocatalytic degradation of DC was carried out using micrometric TiO₂ (both pristine and Ag-decorated), UV-A irradiation and 20 kHz pulsed ultrasound. Sonophotocatalytic tests were compared with photolysis, sonolysis, sonophotolysis, sonocatalysis and photocatalysis data performed in the same conditions. A synergy index of over 2 was determined for tests with pristine TiO₂, while values close to 1.3 were observed for Ag-TiO₂. Reaction intermediates were studied by HPLC-MS, showing degradation mechanisms activated by hydroxyl radicals. Similar pathways were identified for photocatalytic and sonophotocatalytic tests, although the latter led to more oxidized compounds. Different reactor configurations (static and dynamic set ups) were studied. Sequential and simultaneous application of UV light and ultrasound led to similar performance. The role of water matrix was investigated using ultrapure and drinking water, showing marked detrimental effects of electrolytes on the DC degradation. Overall, the combined treatment proved more efficient than photocatalysis alone especially in demanding working conditions, like in drinking water matrices.

Improvements in Catalyst Synthesis and Photocatalytic Oxidation Processing Based on the Use of Ultrasound

The efficacy of photocatalysis strongly depends on the activity of the catalysts and the operational factors, especially factors associated with mass transfer and the possibility of catalyst deactivation. The use of ultrasound has great potential to enhance catalyst activity, during both the synthesis and actual oxidation processes due to the cavitational effects of turbulence and liquid streaming. This article presents an overview of the application aspects of ultrasound, both in the synthesis of the photocatalyst and applications for wastewater treatment. A review of the literature revealed that the use of ultrasound in the synthesis processes can result in a catalyst with a lower mean size and higher surface area as well as uniform size distribution. The application of ultrasound in the actual photocatalytic oxidation facilitates enhancement of the oxidation capacity, leading to higher degradation rates, sometimes synergistic results and definitely lower treatment times. This article also presents guidelines for the selection of the best operating conditions for the use of ultrasound in photocatalytic systems and includes a discussion on the possible reactor configurations suitable for large-scale operations. Overall, a combination of ultrasound with photocatalytic oxidation or the optimized application of ultrasound in catalyst synthesis can yield significant benefits.

Digitally Printed AgNPs Doped TiO2 on Commercial Porcelain-Grès Tiles: Synergistic Effects and Continuous Photocatalytic Antibacterial Activity

In the present study, we use commercial digitally printed ceramic tiles, functionnalized by AgNPs doped micro–TiO2, to investigate the mechanism of Ag in the continouos photocatalytic antibacterial activity. The novelty of the research lies in the attempt to understand the mechanism of Ag, supported on TiO2, able to exhibit the same antibacterial activity of a standard system containing Ag species, but here, totally embedded on the tile surface, and thus not free to move and damage the bacteria cell. UV/vis diffuse reflectance spectroscopy (DRS) of AgNPs–TiO2 tiles indicated an enhanced visible light response, wherein a new absorption band was produced around 18,000–20,000 cm−1 (i.e., in the 400–600 nm range) owing to the surface plasmon resonance (SPR) of AgNPs. The antibacterial photocatalytic experiments were conducted towards the inactivation of E. coli under solar light and indoor light. It was found that the degradation speed of E. coli in the presence of AgNPs–TiO2 tiles is solar light-intensity depending. This justifies the semiconductor behavior of the material. Furthermore, the AgNPs–TiO2 tiles exhibit a high ability for the inactivation of E. coli at a high load (104–107 colony-forming unit (CFU)/mL). Additionally, AgNPs–TiO2 tiles showed a remarkable antibacterial activity under indoor light, which confirms the good photocatalytic ability of such tiles. On the basis of the reactive oxygen species (ROS) quenching experiments, O2•− species and h+ were more reactive for the inactivation of E. coli rather than •OH species. This is because of the different lifetime (bacteria are more likely oxidized by ROS with longer lifetime); in fact, O2•− and h+ exhibit a longer lifetime compared with •OH species. The generation of H2O2 as the most stable ROS molecule was also suggested.

The Sonophotocatalytic Degradation of Pharmaceuticals in Water by MnOx-TiO2 Systems with Tuned Band-Gaps

Advanced oxidation processes (AOPs) are technologies to degrade organic pollutants to carbon dioxide and water with an eco-friendly approach to form reactive hydroxyl radicals. Photocatalysis is an AOP whereby TiO2 is the most adopted photocatalyst. However, TiO2 features a wide (3.2 eV) and fast electron-hole recombination. When Mn is embedded in TiO2, it shifts the absorption wavelength towards the visible region of light, making it active for natural light applications. We present a systematic study of how the textural and optical properties of Mn-doped TiO2 vary with ultrasound applied during synthesis. We varied ultrasound power, pulse length, and power density (by changing the amount of solvent). Ultrasound produced mesoporous MnOx-TiO2 powders with a higher surface area (101–158 m2 g−1), pore volume (0-13–0.29 cc g−1), and smaller particle size (4–10 µm) than those obtained with a conventional sol-gel method (48–129 m2 g−1, 0.14–0.21 cc g−1, 181 µm, respectively). Surprisingly, the catalysts obtained with ultrasound had a content of brookite that was at least 28%, while the traditional sol-gel samples only had 7%. The samples synthesized with ultrasound had a wider distribution of the band-gaps, in the 1.6–1.91 eV range, while traditional ones ranged from 1.72 eV to 1.8 eV. We tested activity in the sonophotocatalytic degradation of two model pollutants (amoxicillin and acetaminophen). The catalysts synthesized with ultrasound were up to 50% more active than the traditional samples.

In situ surface formation of TiO2/Ti(NO2) hybrid nanocomposites with N2 APPJ treatment for efficient C2H4 photodegradation

TiO₂/Ti(NO₂) hybrid films were prepared using N₂ atmospheric pressure plasma jet treatment on TiO₂ coating. The film structure and morphology have been investigated using optical emission spectra, Fourier-transform infrared spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The formed TiO₂/Ti(NO₂) photocatalystic thin films were applied for C₂H₄ photodegradation under UV irradiation. The results showed that the composite films exhibited superior photocatalytic activity over the untreated TiO₂ film. The C₂H₄ concentration after 120 min varied from 12 to 6.2 mg/L, 6.7 mg/L, 7 mg/L for TiO₂ with 1 min, 2 min and 3 min plasma treatment, respectively. In the banana storage experiment, the concentration of C₂H₄ was reduced from 15 to 9 ppm after 36 h with TiO₂/Ti(NO₂) nanocomposite film illuminated by UV light. The photocatalytic mechanism has been discussed. The composite film is able to more effectively separate the photo-excited electrons and holes, thus leading to the much high activity in C₂H₄ degradation. The current work has paved a way towards postharvest fruit preservation.

Indoor air in healing environments

Purpose

Several countries have carried out air quality monitoring in professional workplaces where chemicals are used. Health-care spaces have been less investigated. This paper aims to define a protocol, as developed by a research group, for inpatient rooms to understand the state of the art and to suggest design and management strategies for improving process quality.

Design/methodology/approach

Starting from the ISO-16000 standard and guidelines for monitoring activities, a protocol is defined for a one year investigation, with passive samplers. Through data analysis of the investigations and analysis of the cleaning and finishing products, heating, ventilation and air conditioning and maintenance activities, etc., it is possible to highlight the potential influences of chemical pollution.

Findings

A methodology is defined for understanding the chemical pollution and the possible factors related to construction materials, cleaning products and maintenance activities.

Research limitations/implications

The paper analyzes only a limited number of case studies because the monitoring activity is still in progress.

Practical implications

The investigation offers a starting point for a wide tool for the definition of design, maintenance and management strategies in health-care facilities.

Social implications

The research project, aimed at improving the knowledge of indoor air quality (IAQ) in inpatient rooms, is a starting point for a supporting tool for future regulations concerning health-care facilities.

Originality/value

IAQ is an issue on which many governments are focusing. Several health-care researchers have reported studies that aim at improving users’ health. Most investigations are about biological and physical risks, but chemical risks have been less studied. The paper suggests some design and management strategies for inpatient room.

Ultrasound assisted synthesis of reduced graphene oxide (rGO) supported InVO4-TiO2 nanocomposite for efficient hydrogen production

Herein, a ternary nanocomposite, comprising metal oxide (InVO₄ and TiO₂) photocatalysts supported on rGO sheets was prepared via the hydrothermal method in the presence and absence of ultrasound irradiation. The photocatalytic performance of the prepared rGO/InVO₄-TiO₂ nanocomposites was evaluated for H₂ evolution activity from water splitting with glycerol as a sacrificial agent. Interestingly, a synergistic effect (6-fold) was observed with rGO/InVO₄-TiO₂ nanocomposite prepared with the help of ultrasound compared to the samples prepared without ultrasound. The optimized nanocomposite (rGO/InVO₄-TiO₂) exhibited a maximum H₂ evolution of 1669 μmol h^-1, a ∼13-fold enhancement compared to the bare TiO₂. This remarkable enhancement is mainly due to the synergistic effect induced by ultrasonic irradiation along with the shifting of the optical band gap of TiO₂ from 3.20 eV to 2.80 eV by loading of InVO₄ and rGO and also strong chemical bonding between metal (Ti) and C through Ti-C bond formation, as identified by UV-vis DRS spectra and XPS spectra, respectively. Moreover, a significant quenching of PL emission intensity and smaller radius arc of the Nyquist plot in the EIS were observed when the rGO and InVO₄ were loaded in TiO₂, indicating the efficient charge carriers separation and transfer in the presence of rGO sheet, resulting in enhanced photocatalytic activity. Thus, application of ultrasound has played significant and important roles in substantially enhancing hydrogen evolution along with rGO and InVO₄ acting as support and co-catalyst, respectively.

Ultrasound to improve both synthesis and pollutants degradation based on metal nanoparticles supported on TiO2

Sonochemistry is based on acoustic cavitation, which consist in the formation, growth, and implosive collapse of bubbles within a liquid. Collapsing bubbles generate localized hot spots, characterized by temperatures up to 5000 K and pressures up to 1800 atm. These extreme conditions allow producing a variety of nanostructured and amorphous materials, as well as they are advantageous for chemical processes. Ultrasound requires inexpensive equipment and fewer steps than conventional methods. Combining ultrasound and photocatalysis enhances the performance of the processes, reduces reaction time, avoids the use of extreme physical conditions and improves the photocatalytic materials properties increasing their activity. Here, we reported the positive effect of US in synthesizing Me-modified TiO₂ (Me = Ag, Cu, Mn) for pollutants degradation in gas-phase; also, we proved the advantageous application of ultrasound for the photocatalytic removal of organic compounds in water. Ultrasound produced more efficient Me-doped TiO₂, which showed higher activity in visible light. When combined with photocatalytic water treatment, the organic compounds degradation and mineralization increases.

Indoor Air Quality in Inpatient Environments: A Systematic Review on Factors that Influence Chemical Pollution in Inpatient Wards

Introduction

Indoor air quality is one the main issues in which governments are focusing. In healing spaces, several research studies are reporting a growing number of data analysis and research works in order to guarantee and prevent health of users and workers. Currently the main investigations are about biological and physical risks; otherwise chemical ones are less investigated. Several countries are carrying out indoor air quality monitoring in those professional workplaces in which chemicals are used but also in some typically indoor (generic) spaces for the building hygiene assessment. The indoor air is affected by several factors that currently are analyzed punctually, without a whole scenario of all the variable performances. The authors have done a systematic review on the current state of the art and knowledge related to chemical pollution in healing spaces and the emerging strategies, supported by scientific literature, for healthy inpatient rooms and their indoor air.

Methodology

The systematic review has been done through the analysis of papers from SCOPUS, DOAJ, and PubMed databases. The survey sample considered 483 scientific articles, between 1989 and 2017, and starting the systematic reading and analysis of the abstracts, only 187 scientific papers were selected, and only 96 were accessible.

Discussion

Since scientific literature reports very different outputs and results, the resulting work from the survey is divided into specific fields of interest related to construction and finishing materials, installations, components, ventilation systems, processes, etc. Starting from the systematic reading, the paper classifies the factors of indoor air in four macroareas: outdoor air and microclimatic factors (temperature, relative humidity, air velocity, air change, etc.); management activities (management and maintenance activities, ventilation systems, HVAC, cleaning and disinfectant activities, etc.); design factors (room dimensions, furniture, finishing materials, etc.); and human presence and medical activities (users' presence, their health status, and medical activities carried out in inpatient rooms).

Conclusion

The systematic review gives rise to a broad scenario on the existing knowledge regarding the indoor air pollution, design, and management strategies for healthy spaces and several emerging topics. Although the aim of the investigation is strictly related to chemical pollution, several considerations from the biological point of view have been listed. The systematic review, supported by the existing scientific literature, becomes a starting point for considering the importance of the topic and to stimulate the knowledge around this field of interest for improving studies, analysis, and simulations.

Ultrasound-assisted impregnation for high temperature Fischer-Tropsch catalysts

A fraction of the petroleum extracted from oil reservoirs contains associated natural gas. Rather than building infrastructure to recover low volumes of this natural gas, the industry flares or vents it to the atmosphere, which contributes to atmospheric greenhouse gas emissions but also reduces the air quality locally because it contains gaseous sulphur and nitrogen compounds. Converting the natural gas (NG) to hydrocarbons with a small-scale two-step gas-to-liquids process, is an alternative to flaring and venting. In the first step, NG reacts with oxygen to form syngas (Catalytic Partial Oxidation) and in the second step the syngas reacts over metallic catalysts to form higher paraffins at 210 °C to 300 °C-Fischer Tropsch synthesis (FT). For the first time, we synthesize bimetallic FeCo FT catalysts with ultrasound. An ultrasonic horn agitates the solution during the entire impregnation process. The active phase dispersion of the sonicated catalysts was superior to the catalyst synthesized without ultrasound, while reducing the impregnation time by a factor of three. We tested our catalysts in a lab-scale, fixed-bed reactor at 270 °C and 300 °C, and achieved 80% conversion over 3-days on stream and a 40% yield of C₂₊.

Water treatment: Mn-TiO2 synthesized by ultrasound with increased aromatics adsorption

Pharma-products are mostly single or multiple cyclic compounds. They pollute surface water and are persistent in the aquatic ecosystem. When irradiated by UV light, TiO₂ catalysts cleave or degrade organic contaminants in water. Removal of organics by photocatalysis results from a synergistic effect of adsorption and photocatalysis. Synthesis of catalysts by ultrasound (US) produces high surface area and porous solids. Here, we synthesized Mn-doped TiO₂ with a US-assisted sol-gel method. Compared to the classical synthesis, US increased the BET surface area from 83 m² g^-1 to 90 m² g^-1 in the Mn-TiO₂ sample and from 9.0 m² g^-1 to 53 m² g^-1 in the control TiO₂. Accordingly, acetaminophen and amoxicillin adsorption increased from 44% to 52%, and from 34% to 94% for the Mn-TiO₂ obtained in absence and presence of US, respectively. When in a mixture, the two drugs strongly compete for adsorption on TiO₂.

Ultrasonic-assisted in-situ fabrication of BiOBr modified Bi2O2CO3 microstructure with enhanced photocatalytic performance

Via an ultrasonic-assisted in-situ etching method, BiOBr modified Bi₂O₂CO₃ microstructures were fabricated in short time. The samples were characterized by XRD, SEM, TEM, BET, UV-Vis, XPS and PL spectra methods. Rhodamine B (RhB) aqueous solution was applied to evaluate the photocatalytic activities of the as-prepared samples. The results showed that the sample prepared at pH of 2 in which the molar ratio of BiOBr and Bi₂O₂CO₃ was 0.69:1 had the largest specific surface area, the best utilization for ultraviolet and visible light and efficient separation efficiency of charge carriers, contributing to its best photocatalytic activity. O₂^- was proved to be main active species in RhB photodegradation process. Last, the photocatalytic mechanism of the composite was discussed in detail.

Mechanistic insights into plasmonic photocatalysts in utilizing visible light

The utilisation of sunlight as an abundant and renewable resource has motivated the development of sustainable photocatalysts that can collectively harvest visible light. However, the bottleneck in utilising the low energy photons has led to the discovery of plasmonic photocatalysts. The presence of noble metal on the plasmonic photocatalyst enables the harvesting of visible light through the unique characteristic features of the noble metal nanomaterials. Moreover, the formation of interfaces between noble metal particles and semiconductor materials further results in the formation of a Schottky junction. Thereby, the plasmonic characteristics have opened up a new direction in promoting an alternative path that can be of value to the society through sustainable development derived through energy available for all for diverse applications. We have comprehensively prepared this review to specifically focus on fundamental insights into plasmonic photocatalysts, various synthesis routes, together with their strengths and weaknesses, and the interaction of the plasmonic photocatalyst with pollutants as well as the role of active radical generation and identification. The review ends with a pinnacle insight into future perspectives regarding realistic applications of plasmonic photocatalysts.