A sono-photocatalyst for humic acid removal from water: Operational parameters, kinetics and mechanism

A systematic review of photocatalytic degradation of humic acid in aqueous solution using nanoparticles

OBJECTIVES

Humic acid (HA) compounds in the disinfection processes of drinking water and wastewater are considered as precursors of highly toxic, carcinogenic and mutagenic disinfectant by-products. The aim of this study was to systematically review all research studies on the photocatalytic degradation of humic acid and to evaluate the laboratory conditions and results of these studies.

CONTENT

The present systematic review was performed by searching the Scopus, PubMed, and web of science databases until December 2021. The parameters of type of catalyst, catalyst size, optimum pH, optimum initial concentration of humic Acid, optimum catalyst concentration, optimum time, light used and removal efficiency were investigated.

SUMMARY

395 studies were screened and using the inclusion and exclusion criteria, in total, 20 studies met our inclusion criteria and provided the information necessary to Photocatalytic degradation of humic acid by nanoparticles. In the investigated studies, the percentage of photocatalytic degradation of humic acid by nanoparticles was reported to be above 70%, and in some studies, the removal efficiency had reached 100%.

OUTLOOK

From the results of this systematic review, it was concluded that the photocatalytic process using nanoparticles has a high effect on the degradation of humic acid.

A comprehensive appraisal on status and management of remediation of DBPs by TiO2 based-photocatalysts: Insights of technology, performance and energy efficiency

Disinfection has been acknowledged as an inevitable technique in water treatment. However, an inadvertent consequence of generation of carcinogenic and mutagenic disinfection byproducts (DBPs) is associated with the reaction of disinfectants and natural organic matter (NOM) present in water. More than 700 DBPs have been identified in drinking water. The conventional processes carried out in WTPs do not optimally ensure NOM elimination, which evokes the need for the incorporation of other processes. In this context, several physicochemical and advanced oxidation processes (AOP), such as adsorption, membrane techniques, photocatalysis, etc., have been studied for the removal of NOM from water. Photocatalysis using semiconductors has been one of the most proficient technologies, which utilizes light energy for the degradation of recalcitrant organics. The present study aims to provide a comprehensive appraisal on the performance of titanium dioxide (TiO₂) based photocatalysts in the remediation of DBPs concerning the efficacy and energy requirements of the system. Furthermore, the effect of process parameters, such as pH, catalyst dose, light intensity, etc. on the efficacy of the process was also studied. It was observed that conventional P25-TiO₂ powders were efficient in the degradation of dissolved organic carbon (DOC) (up to 90%). However, low photocatalytic activity under visible light activation is one of its significant downsides. Several modifications on the catalyst surface in many studies exhibited advantages, such as high humic acid (HA) degradation under visible light. Furthermore, doped TiO₂ catalysts have shown high total organic carbon (TOC) degradation. The photocatalytic systems have achieved a better decrease in trihalomethane formation potential (THMFP) when compared to haloacetic acid formation potential (HAAFP). The energy requirements of the photocatalytic systems are determined by electrical energy per order (EE/O), which has been observed to be lesser for doped TiO₂ and engineered TiO₂ catalysts when compared with P25-TiO₂ powders. Carbon, iron, silver, etc., based catalysts can be a promising alternative to TiO₂-based photocatalysts for the degradation of NOM, although further research is required in this direction. The present review provides critical highlights on the uses, opportunities, and challenges of TiO₂-based photocatalytic techniques for the management of DBPs and their precursors pertaining to an emerging area of water treatment.

Copper cable doped with tin oxide and its application to photodegrade natural organic matters

Natural organic matters are of particular importance in drinking water treatment due to their reaction with chlorine, and formation of disinfection byproducts that cause cancer in humans. Photocatalysis can remove natural organic matters from water but usually powdery photocatalysts are used which should be separated from water by filtration due to their toxic effects. In this work, a piece of copper cable used in electric industries was doped with tin oxide and applied as a photocatalyst to remove natural organic matters, humic acid and humate liquid fertilizer, from water. Tin (II) chloride was used as precursor, and deposited on the copper cable by dip coating method. Then the coated cable was calcinated at 300 °C. The prepared SnO₂/CuO/Cu photocatalyst was characterized by ICP, SEM, DRS, XRD, and ASAP techniques. The results of XRD confirmed the existence of copper oxide, and tin oxides. DRS showed that doping with tin oxide caused the photocatalytic property to improve, and the catalyst was active under irradiation of UV-Vis light. Effects of humic acid concentration, photocatalyst length, and time were studied. The kinetic of humic acid photodegradation by the SnO₂/CuO/Cu photocatalyst was investigated, which obeyed the first order model. The photocatalyst regeneration and reuse were investigated in five cycles, and the results indicated that photocatalytic activity was remained nearly constant. The cable form SnO₂/CuO/Cu photocatalyst with the main advantage of easy separation from water without the need to filtration, has excellent photocatalytic activity.

Enhanced removal of humic acid from piggery digestate by combined microalgae and electric field

Microalgae technology is a promising method for treating piggery digestate, while its removal ability of humic acids (HAs) is poor. Here, an electric field-microalgae system (EFMS) was used to improve the removal of HAs from the piggery digestate. Results indicated that the removal of HAs by EFMS relied on the initial concentration of HAs, electrical intensity, the initial inoculation concentration of microalgae and pH. Values of these parameters were optimized as electrical intensity of 1.2 V/cm, microalgae initial inoculation concentration of 0.1 g/L and pH 5.0. The HAs removal efficiency by EFMS (55.38%) was 13% and 38% higher than that by single electric field and microalgal technology. It was observed that oxidation, coagulation and assimilation contributed to the removal of HAs, suggesting that EFMS could serve as an attractive and cost-effective technique for the removal of HAs from the piggery digestate.

Effect of nano-TiO2 on humic acid utilization from piggery biogas slurry by microalgae

Resource recovery from piggery biogas slurry has become an inevitable demand for sustainable development of pig industry. Microalgae show great potential in recovering nitrogen and phosphorus from piggery slurry, but struggle to utilize organic pollutants, as most of them are inert components (e.g., humic acids, HAs). In this study, nano-TiO₂ was used to enhance the utilization of HAs by microalgae from piggery biogas slurry. Results showed that the optimal conditions for microalgal growth and HAs removal by the microalgae-TiO₂ coupling system were TiO₂ dosage of 0.30 g/L, microalgal inoculation concentration of 0.40 g/L, light intensity of 360 µmol photon/(m²·s) and temperature of 30 °C, with the microalgal chlorophyll concentration of 6.51 mg/L and HAs removal efficiency of 50.14%. Analysis of HAs composition variations in the piggery biogas slurry indicated that the decrease of HAs was caused by their decomposition into small molecules under the photocatalytic reactions of TiO₂.

Solochrome Dark Blue Azo Dye Removal by Sonophotocatalysis Using Mn2+ Doped ZnS Quantum Dots

This work investigates the degradation of the azo dye solochrome dark blue (SDB) by measurement of the photocatalytic, sonocatalytic and sonophotocatalytic activities, under low ultrasonic frequency (40 kHz) and UV-C (254 nm) light, using Mn-doped ZnS semiconductor quantum dots (Mn2+:ZnS Qds) as catalysts, prepared by a simple chemical precipitation procedure. In order to study the different morphological and optical crystal properties, various characterization techniques were used, such as high resolution transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, N2 adsorption-desorption at −196 °C and ultraviolet-visible spectroscopy. The average particle size of the semiconductor Qds was in the range of 3–4 nm. The optimal parameters affecting dye degradation, such as the catalyst loading, solution pH, time of irradiation, initial concentration of dye, dopant concentration, ultrasonic power and frequency effect were evaluated. The synthesized catalytic material exhibited a high activity for sonophotocatalytic degradation of SDB (89%), larger than that observed for sonocatalysis (69.7%) or photocatalysis (55.2%) alone, which was due to the improved electron-holes separation, formation of more reactive radicals and enhancement of the active surface area. Qds showed good stability and reusability after five repeated cycles. Finally, the degradation products were identified by liquid chromatography-mass spectrometry (LC-MS).

Enhanced removal of humic acid from aqueous solution by combined alternating current electrocoagulation and sulfate radical

Application of alternating current in electrocoagulation and activation of persulfate (AEC-PS) for the effective removal of humic acid (HA) from aqueous solution was evaluated. In order to optimize the removal efficiency HA by the AEC-PS process, several influencing parameters such as pH, reaction time, PS dose, current density (CD), concentration of NaCl, initial concentration of HA, and coexisting cations and anions influence were investigated. From the batch experiments, the highest HA removal efficiency obtained was 99.4 ± 0.5% at pH of 5, reaction time of 25 min, CD of 4.5 mA/cm², PS dose of 200 mg/L, and NaCl concentration of 0.75 g/L for an initial HA concentration of 30 mg/L. When CD increased from 1.25 to 4.5 mA/cm², the HA removal efficiency was improved from 88.8 ± 4.4% to 96.1 ± 1.5%. In addition, the type of coexisting cations and anions exerted a significant role, leading to a reduction in the removal efficiency of HA. To investigate the dominant free activated radical, radical scavengers such as tert-butyl alcohol and ethanol were employed. It was observed that both OH and SO₄^- radicals substantially contributed to the removal of HA, and the contribution of SO₄^- radical was higher than that of OH radical, suggesting that AEC-PS process could serve as a novel and effective treatment technique for the removal of organic matters from aqueous sources.

Evaluation of Sonocatalytic and Photocatalytic Processes Efficiency for Degradation of Humic Compounds Using Synthesized Transition-Metal-Doped ZnO Nanoparticles in Aqueous Solution

The existence of a humic substance in water causes the growth of microorganisms and reduces the quality of water; therefore, the removal of these materials is crucial. Here, the ZnO nanoparticles doped using transition metals, copper (Cu) and manganese (Mn), were used as an effective catalyst for photocatalytic removal of humic substances in an aqueous environment under ultraviolet, visible light, and light-emitting diode irradiations. Also, we study the effect of the sonocatalytic method. A solvothermal procedure is used for doping, and the Cu- and Mn-doped ZnO nanocatalyst were characterized by means of FTIR, XRD, AFM, SEM, and EDAX analyses. We investigate the effect of operational variables, including doping ratio, initial pH, catalyst dose, initial HS content, and illuminance on the removal efficiency of the processes. The findings of the analyses used for the characterization of the nanoparticles illustrate the appropriate synthesis of the Cu- and Mn-doped ZnO nanocatalysts. We observe the highest removal efficiency rate under acidic conditions and the process efficiency decreased with increasing solution pH, when we tested it in the range of 3–7. Photocatalytic decomposition of HS increases with a rise in catalyst dose, but an increase in initial HS content results in decreasing the removal efficiency. We observe the highest photocatalytic degradation of humic acid while using the visible light, and the highest removal efficiency is obtained using Cu.ZnO. The Cu.ZnO also shows better performance under ultraviolet irradiation compared to other agents.

Insights into the novel application of Fe-MOFs in ultrasound-assisted heterogeneous Fenton system: Efficiency, kinetics and mechanism

In this work, as a new strategy, ultrasound/H₂O₂/MOF system was firstly applied by environmental-benign Fe-MOFs (MIL-53, MIL-88B and MIL-101) for tetracycline hydrochloride removal. The syntheticFe-MOFs were characterized by XRD, FTIR, SEM, XPS, N₂ sorption-desorption isotherms and CO-FTIR. MIL-88B demonstrated the best catalytic performance because of its highest amount of Lewis acid sites. Influencing factors, contrast experiment, and corresponding dynamics were carried out to obtain the best experimental conditions and reaction system. Under optimal conditions ([Tetracyclinehydrochloride] = 10 mg/L, [MIL-88B] = 0.3 g/L, [H₂O₂] = 44 mM, [ultrasound power] = 60 W, and pH = 5.0), the-first-order kinetic rate constant k was calculated to be 0.226 min^-1, higher than the simple combination of the ultrasound system (0.004) and MIL-88B/H₂O₂ system (0.163), indicating the importance of synergistic effect between ultrasound and Fenton reaction. EPR test and quenching experiment proved that ·OH is mainly responsible for tetracycline hydrochloride removal. The major reaction path is the adsorption and decomposition of H₂O₂ by coordinative unsaturated iron sites on Fe-MOF, but it is not the only path. The direct decomposition of H₂O₂ and the cavitation effect caused by ultrasound also contribute to the generation of OH.

Solvothermal synthesis of InNbO4 cubes for efficient degradation of pefloxacin

A novel solvothermal process for synthesizing InNbO₄ nanomaterials was developed. In this manner, a series of InNbO₄ samples was synthesized. It was shown that reaction temperature and precursor pH had strong influence on the attributes of InNbO₄ samples. The X-ray diffraction patterns revealed that all the samples possessed monoclinic structure and the optimal reaction condition was found at 250 °C with a pH of 5. Scanning electron microscopy images of different InNbO₄ samples showed various morphologies. Transmission electron microscopy verified the synthesized InNbO₄-pH 5 was single-crystal cubes. X-ray photoelectron spectra verified the existence of In, Nb, and O in InNbO₄-pH 5 sample. The band gap of InNbO₄-pH 5 was calculated to be 2.51 eV. The photocurrent intensity of InNbO₄-pH 5 was the highest among the prepared samples. The photocatalytic degradation of pefloxacin was investigated using these samples. The InNbO₄-pH 5 exhibited best degradation efficiency among these samples. The removal efficiency of pefloxacin with InNbO₄-pH 5 could reach 80.2% in 60 min. Based on free radical capture results, superoxide radicals and holes showed to be the dominant active species. In addition, UHPLC/MS/MS was used to identify the degradation intermediates. Five new pefloxacin degradation products were found and possible degradation pathways were suggested.

Efficiency of Photocatalytic Degradation of Humic Acid Using Magnetic Nanoparticles (Fe-doped TiO2@Fe3O4) in Aqueous Solutions

Background: Among water pollutants, Natural Organic Matters (NOMs) are highly important for making problems in water treatment plants. Objectives: The main objective of this study was to investigate the efficiency of photocatalytic degradation of humic acid using magnetic nanoparticles (Fe-doped TiO2@Fe3O4) in aqueous solutions. Methods: In the present experiment, Fe-doped TiO2@Fe3O4 nanoparticles were synthesized by the sol-gel method, and SEM, XRD, and DRS analyzes were utilized to characterize the synthesized nanoparticles. The effects of various variables, including pH (3 - 11), initial concentration of humic acid (20 - 80 mg/L), and concentration of nanoparticles (250 - 2000 mg/L) at different reaction times (15 - 60 min) were investigated on the photocatalytic degradation of humic acid. Results: The maximum degradation efficiency of humic acid at pH 3, the initial humic acid concentration of 5 mg/L, nanoparticle dose of 400 mg/L, and reaction time of 60 min using a 15-W bare UV lamp. Conclusions: Due to the high efficiency of photocatalytic degradation, it is proposed to use for the removal of humic acid from water resources.

Preparation of sonoactivated TiO2-DVDMS nanocomposite for enhanced antibacterial activity

Titanium dioxide (TiO₂) nanoparticle has good photo-/sono-catalytic features, the reunion of this particle in solution-phase generally limits the extensive biomedical application. In the present study, the aggregation of TiO₂ nanoparticles was alleviated by facile fabrication under different pH conditions. A novel TiO₂ nanocomposite was further synthesized by properly conjugation with trace amount of DVDMS sensitizer (named DFT). The characterization, sonoactivity, as well as the antibacterial efficiency were specially evaluated. The results showed that the sonochemical activity of DFT was greatly improved as compared with the simple surface modification of TiO₂ (F-TiO₂) and free DVDMS, regarding to the hydroxyl radicals and singlet oxygen yields using the same ultrasound exposure. Moreover, ultrasonic stimulation of DFT exhibited excellent bacterial eradication, with up to 92.41% of killing efficiency in S. aureus. The flow cytometry analysis indicated an increased intracellular ROS and membrane disturbance by combination of DFT and ultrasound. The findings suggest that the proper fabrication and DVDMS incorporation greatly improved the sonocatalytic process of TiO₂, and the ultrasound based biomedical applications of DFT deserve future deep investigation.

Fabrication of black TiO2−x/CuFe2O4 decorated on diatomaceous earth with enhanced sonocatalytic activity for ibuprofen mitigation

This study reports facile fabrication of black TiO_2−x/CuFe₂O₄ (Ti³⁺ self-doped titania coupled with copper ferrite), an efficient sonocatalyst for ibuprofen (IBP) mitigation.