Ultrasonic synthesis of CeO2@organic dye nanohybrid: Environmentally benign rabid electrochemical sensing platform for carcinogenic pollutant in water samples

Cascade enzyme-mimicking with spatially separated gold-ceria for dual-mode detection of superoxide anions

Metal-semiconductor nanozyme of dumbbell Au-CeO2 with spatially separated heterostructure has cascade superoxide dismutase (SOD)-like and peroxidase (POD)-like activities for superoxide anions detection. It was synthesized by selective growth of CeO2 at the ends of Au nanorod (Au NR). Taking advantage of the excellent local surface plasmon resonance (LSPR) effect of Au NR, the spatially separated Au-CeO2 has a higher photothermal effect than the continuously growing core-shell structure of Au@CeO2. Meanwhile, the hot electrons of Au NR could transfer to CeO2 under 808 nm laser irradiation, changing the ratio of Ce3+/Ce4+ redox couples over CeO2 and facilitating H2O2 decomposition thus enhancing POD-like activity. Based on the SOD-like activity of Au-CeO2, superoxide anion (O2·-) can be transformed into hydrogen peroxide (H2O2). Dual-mode including absorbance and temperature sensing detection of O2·-, with the detection range from nM to μM i.e., 0.1-150 μM and LOD of 0.033 μM (S/N = 3) was achieved through the cascade catalysis and photothermal effect. The as-proposed method was applicable to both cancer and normal cell samples with satisfactory accuracy and recovery.

Four-core fiber-based multi-tapered WaveFlex biosensor for rapid detection of Vibrio parahaemolyticus using nanoparticles-enhanced probes

Infections caused by Vibrio parahaemolyticus (V. parahaemolyticus) can be highly fatal, making rapid and sensitive detection of them is essential. A new optical fiber biosensor based on localized surface plasmon resonance (LSPR) phenomenon is developed in this paper. A tapered-in-tapered fiber structure based on MFM is constructed by using four-core fiber (FCF) and multi-mode fiber (MMF) to qualitatively detect different concentrations of V. parahaemolyticus. The sensor successfully excites the LSPR phenomenon and increases the attachment point of biomolecules on the probe surface by fixing gold nanoparticles (AuNPs), molybdenum disulfide nanoparticles (MoS2-NPs) and cerium dioxide nanorods (CeO2-NRs). The functionalization of polyclonal antibodies on the probe surface can improve the specificity of the sensor. The linear detection range of the developed sensor was 1 × 100-1 × 107 CFU/mL, the sensitivity was 1.61 nm/[CFU/mL], and the detection limit was 0.14 CFU/mL. In addition, the reusability, reproducibility, stability, and selectivity of the sensor probe are also tested, which shows that the sensor has great application prospects.

Unveiling carcinogenic pollutant levels in environmental water samples through facile fabrication of gold nanoparticles on sulfur-doped graphitic carbon nitride

Extensive utilization of pesticides and herbicides to boost agricultural production increased the environmental health risks, which can be mitigate with the aid of highly sensitive detection systems. In this study, an electrochemical sensor for monitoring the carcinogenic pesticides in the environmental samples has been developed based on sulfur-doped graphitic-carbon nitride-gold nanoparticles (SCN-AuNPs) nanohybrid. Thermal polycondensation of melamine with thiourea followed by solvent exfoliation via ultrasonication leads to SCN formation and electroless deposition of AuNPs on SCN leads to SCN-AuNPs nanohybrid synthesis. The chemical composition, S-doping, and the morphology of the nanohybrid were confirmed by various microscopic and spectroscopic tools. The as-synthesized nanohybrid was fabricated with glassy carbon (GC) electrode for determining the carcinogenic hydrazine (HZ) and atrazine (ATZ) in field water samples. The present sensor exhibited superior electrocatalytic activity than GC/SCN and GC/AuNPs electrodes due to the synergism between SCN and AuNPs and the amperometric studies showed the good linear range of detection of 20 nM-0.5 mM and 500 nM-0.5 mM with the limit of detection of 0.22 and 69 nM (S/N = 3) and excellent sensitivity of 1173.5 and 13.96 μA mM-1 cm-2 towards HZ and ATZ, respectively. Ultimately, the present sensor is exploited in environmental samples for monitoring HZ and ATZ and the obtained results are validated with high-performance liquid chromatography (HPLC) technique. The excellent recovery percentage and close agreement with the results of HPLC analysis proved the practicability of the present sensor. In addition, the as-prepared materials were utilized for the photocatalytic degradation of ATZ and the SCN-AuNPs nanohybrid exhibited higher photocatalytic activity with the removal efficiency of 93.6% at 90 min. Finally, the degradation mechanism was investigated and discussed.

Ti3AlC2 MAX Phase Modified Screen-Printed Electrode for the Fabrication of Hydrazine Sensor

Hydrazine is considered a powerful reducing agent and catalyst, showing diverse applications in agricultural industries, toxic degradation research, and wastewater management. Additionally, hydrazine can trigger some specific reactions when combined with suitable oxidants. Due to its highly polar nature, hydrazine can easily dissolve in alcohol, water, and various other polar solvents. Therefore, it can be extensively utilized in different areas of application and industries such as rocketry and various chemical applications. Despite its beneficial properties, hydrazine is unstable, posing significant risk due to its highly toxic nature. It is extremely hazardous to both human health and the environment. It can cause various illnesses and symptoms such as dizziness, temporary blindness, damage to the central nervous system, and even death when inhaled in sufficient quantities. Therefore, it is highly important to monitor the level of hydrazine to prevent its toxic and hazardous effects on human beings and the environment. In the present study, we discuss the simple fabrication of a disposable cost-effective and eco-friendly hydrazine sensor. We used a screen-printed carbon electrode, i.e., SPCE, as a base for the construction of a hydrazine sensor. The Ti3AlC2 MAX has been used as a suitable and efficient electrode material for the fabrication of disposable hydrazine sensors. We modified the active surface of the SPCE using a drop-casting approach. The resulting Ti3AlC2 MAX modified SPCE (Ti3AlC2@SPCE) has been utilized as an efficient and low-cost hydrazine sensor. Cyclic voltammetry, i.e., CV, and linear sweep voltammetry, viz., LSV, was employed as a sensing technique in this study. The optimization of pH and electrode material loading was conducted. The Ti3AlC2@SPCE exhibited excellent sensing performance toward hydrazine oxidation. A reasonable detection limit (0.01 µM) was achieved for hydrazine sensing. The fabricated sensor also demonstrated a reasonable linear range of 1-50 µM. This work provides the design and fabrication of simple disposable Ti3AlC2@SPCE as a suitable electrode for the determination of hydrazine using LSV technology.

In-situ monitoring of thiazine molecular aggregation in various solvents via a free-standing acoustic levitator

In this work, we explored the in-situ reaction modeling of the molecular self-aggregation of methylene blue (MB), which is a cationic thiazine dye, in different solvents via a container-less acoustic levitator by floating of a single droplet. Our in-situ spectroscopic study revealed that the dimer essentially has a sandwich structural geometry with a deviation from parallel stacking and horizontal arrangements in the molecular planes. The real time conversion of the monomer in MB into a dimer and their dynamics in water and ethanol media were monitored using a free-standing acoustic levitator droplet system. The absorption spectra revealed changes in the two resolved peaks (monomer and dimer) and orderliness when water and ethanol were used as the media. Interestingly, the enhancement in the dimerization of MB could be attributed to droplet evaporation, which is difficult to observe in typical reactor containers. Moreover, acidic protonation resulted in a change in the aggregation orientation direction of the MB molecules, forming an unusual J-aggregation. Theoretical DFT calculations revealed that MB underwent typical H-aggregation and J-aggregation in the different solvent environments, and their orientations well matched the spectroscopic data.

Role of Anions in the Synthesis and Crystal Growth of Selected Semiconductors

The ideal methods for the preparation of semiconductors should be reproducible and possess the ability to control the morphology of the particles with monodispersity yields. Apart from that, it is also crucial to synthesize a large quantity of desired materials with good control of size, shape, morphology, crystallinity, composition, and surface chemistry at a reasonably low production cost. Metal oxides and chalcogenides with various morphologies and crystal structures have been obtained using different anion metal precursors (and/or different sulfur sources for chalcogenides in particular) through typical synthesis methods. Generally, spherical particles are obtained as it is thermodynamically favorable. However, by changing the anion precursor salts, the morphology of a semiconductor is influenced. Therefore, precursors having different anions show some effects on the final forms of a semiconductor. This review compiled and discussed the effects of anions (NO₃⁻, Cl⁻, SO₄^2-, CH₃COO⁻, CH(CH₃)O⁻, etc.) and different sources of S^2- on the morphology and crystal structure of selected metal oxides and chalcogenides respectively.

Ratiometric electrochemical immunoassay for procalcitonin based on dual signal probes: Ag NPs and Nile blue A

In order to determine procalcitonin, a sandwich-type ratiometic electrochemical immunosensor was developed by differential pulse voltammetry (DPV). Due to high chemical stability and good biocompatibility, graphitic carbon nitride (g-C₃N₄) could be used as feasible supporter to carry silver nanoparticles (Ag NPs) with an obvious oxidative peak (measured typically at + 0.3 V vs. SCE). Ag NPs loaded onto g-C₃N₄ were not only beneficial to prevent the agglomeration of Ag NPs, but also favorable to improve the electron transfer velocity of g-C₃N₄. Moreover, the g-C₃N₄-Ag NPs as the matrix could immobilize primary antibody by Ag-N bond. Nile blue A (NBA), an excellent redox probe based on the redox reaction with two-electrons, provides a current signal at - 0.38 V (vs. SCE). Zr-based metal organic framework (UiO-67), an ideal framework material with large specific surface area and high porosity, could absorb the substantial water-soluble NBA by electrostatic adsorption. The UiO-67 modified by NBA (NBA-UiO-67) owned admirable biocompatibility and was a qualifying marker to load the secondary antibody. For the immunosensor, the current ratio of NBA to Ag NPs (I_NBA/I_{Ag NPs}) was increased as the concentrations of PCT increased. Under the optimum conditions, the linear range of the immunosensor was 0.005 to 50 ng/mL; the detection limit was 1.67 pg/mL (S/N = 3), which reflected the excellent analytical performance of the sensor. The proposed immunosensor strategy is a simple and dependable platform, with great application potential in biometric analysis.

Synthesis and characterization of nanoceria for electrochemical sensing applications

Nanoceria (cerium oxide nanoparticles: CeO2-NPs) has received significant attention due to its biocompatibility, good conductivity, and the ability to transfer oxygen. Nanoceria has been widely used to develop electrochemical sensors and biosensors as it could increase response time, sensitivity, and stability of the sensor. In this review, we discussed synthesis methods, and the recent applications employing CeO2-NPs for electrochemical detection of various analytes reported in the most recent four years.

Recent developments in electrochemical sensors for detecting hydrazine with different modified electrodes

The detection of hydrazine (HZ) is an important application in analytical chemistry. There have been recent advancements in using electrochemical detection for HZ. Electrochemical detection for HZ offers many advantages, e.g., high sensitivity, selectivity, speed, low investment and running cost, and low laboriousness. In addition, these methods are robust, reproducible, user-friendly, and compatible with the concept of green analytical chemistry. This review is devoted to the critical comparison of electrochemical sensors and measuring protocols used for the voltammetric and amperometric detection of the most frequently used HZ in water resources with desirable recovery. Attention is focused on the working electrode and its possible modification which is crucial for further development.

Ultrasonic Assisted Synthesis of Size-Controlled Cu-Metal-Organic Framework Decorated Graphene Oxide Composite: Sustainable Electrocatalyst for the Trace-Level Determination of Nitrite in Environmental Water Samples

Excess levels of nitrite ion in drinking water interact with amine functionalized compounds to form carcinogenic nitrosamines, which cause stomach cancer. Thus, it is indispensable to develop a simple protocol to detect nitrite. In this paper, a Cu-metal-organic framework (Cu-MOF) with graphene oxide (GO) composite was synthesized by ultrasonication followed by solvothermal method and then fabricated on a glassy carbon (GC) electrode for the sensitive and selective determination of nitrite contamination. The SEM image of the synthesized Cu-MOF showed colloidosome-like structure with an average size of 8 μm. Interestingly, the Cu-MOF-GO composite synthesized by ultrasonic irradiation followed by solvothermal process produce controlled size of 3 μm colloidosome-like structure. This was attributed to the formation of an exfoliated sheet-like structure of GO by ultrasonication in addition to the obvious influence of GO providing the oxygen functional groups as a nucleation node for size-controlled growth. On the other hand, the composite prepared without ultrasonication exhibited 6.6 μm size agglomerated colloidosome-like structures, indicating the crucial role of ultrasonication for the formation of size-controlled composites. XPS results confirmed the presence of Cu(II) in the as-synthesized Cu-MOF-GO based on the binding energies at 935.5 eV for Cu 2p_3/2 and 955.4 eV for Cu 2p_1/2. The electrochemical impedance studies in [Fe(CN)₆]^3-/4- redox couple at the composite fabricated electrode exhibited more facile electron transfer than that with Cu-MOF and GO modified electrodes, which helped to utilize Cu-MOF-GO for trace level determination of nitrite in environmental effluent samples. The Cu-MOF-GO fabricated electrode offered a superior sensitive platform for nitrite determination than the Cu-MOF and GO modified electrodes demonstrating oxidation at less positive potential with enhanced oxidation current. The present sensor detects nitrite in the concentration range of 1 × 10^-8 to 1 × 10^-4 M with the lowest limit of detection (LOD) of 1.47 nM (S/N = 3). Finally, the present Cu-MOF-GO electrode was successfully exploited for nitrite ion determination in lake and dye contaminated water samples.

Ultrasonic synthesis of α-MnO2 nanorods: An efficient catalytic conversion of refractory pollutant, methylene blue

In this work, uniform α-MnO₂ nanorods were synthesized via a simple hydrothermal followed by ultrasonication method using ultrasonic bath (20 kHz, 100 W) without using any surfactant and template. The crystallographic phases and surface morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transition electron microscopy (TEM) analysis, respectively. Functional group identification and chemical states of α-MnO₂ nanorods were confirmed by Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The as-synthesized uniform nanorods of α-MnO₂ exhibit excellent catalytic conversion of toxic organic contaminant (methylene blue (MB)) in the presence of NaBH₄ as reductant. The α-MnO₂ exhibits excellent stability up to four repeated catalytic cycles with nearly 92% conversion. The kinetic rate constant (k), and turnover frequency (TOF) were 0.736 min^-1 and 0.02 mmol mg^-1 min^-1, respectively. In addition, the fast electron transfer mechanism were investigated and discussed. These results open a new avenue for developing various metal oxide catalysts, which are expected to be very useful catalytic conversions.