The capsule drug device: novel approach for drug delivery to the eye

Progress in Ocular Drug Delivery: Challenges and Constraints

The eye has several dynamic and static barriers in place to limit the entry of foreign substances including therapeutics. As such, efficient drug delivery, especially to posterior segment tissues, has been challenging. This chapter describes the anatomical and physiological challenges associated with ocular drug delivery before discussing constraints with regard to formulation parameters. Finally, it gives an overview of advanced drug delivery technologies with a specific focus on recently marketed and late-stage clinical trial products.

Nanocarriers for ocular drug delivery: Recent advances and future opportunities

Topical route of administration is very important and the most commonly used method of drug delivery for treatment of ocular diseases. However, due to unique anatomical and physiological barriers of eye, it is difficult to achieve the therapeutic concentration in the targeted tissue within the eye. To overcome the effect of these barriers in absorption and to provide targeted and sustained drug delivery, various advances have been made in developing safe and efficient drug delivery systems. Various formulation strategies for ocular drug delivery are used, like basic formulation techniques for improving availability of drugs, viscosity enhancers, and use of mucoadhesives for drug retention and penetration enhancers to promote drug transport to the eye. In this review, we present a summary of the current literature to understand the anatomical and physiological limitations in achieving adequate ocular bioavailability and targeted drug delivery of topically applied drugs and use of new techniques in formulating dosage forms in overcoming these limitations. The recent and future advances in nanocarrier-mediated drug delivery may have the potential to provide patient-friendly and noninvasive techniques for the treatment of diseases related to the anterior and posterior segments of the eye.

NIR-triggered drug delivery system for chemo-photothermal therapy of posterior capsule opacification

Posterior capsule opacification (PCO) is the most common complication after cataract surgery and is likely to cause the second loss of vision. Pharmacological PCO prophylaxis has been proved to be effective, yet no clinical option is available due to the lack of a suitable mode of administration. In this work, we propose a unique concept of NIR dual-triggered drug release from black phosphorus (BP)-based implantable intraocular lens (IOL) for controlled drug release and chemo-photothermal combination therapy of PCO. Here, IOL is used as a "reservoir" of doxorubicin-loaded black phosphorus (BP-DOX), and BP is used as NIR activation agent for controlled drug release and photothermal therapy. This BP-DOX integrated IOL, namely BP-DOX@IOL, shows the characteristics of good transmittance, good mechanical property, NIR dual-triggered drug release behaviors, and excellent photothermal efficacy. In vivo studies reveal that there is no PCO occurrence in rabbits' model by using BP-DOX@IOL combined NIR irradiation, which exhibits distinct superiority on inhibiting PCO than the control group (100% PCO occurrence) 28 days post-surgery. This novel IOL drug delivery system would be a promising strategy for the future clinical application for PCO prophylaxis and treatment.

Chitosan coated nanoparticles for efficient delivery of bevacizumab in the posterior ocular tissues via subconjunctival administration

In several ocular diseases, vascular endothelial growth factor (VEGF) level has been found to be unregulated. Bevacizumab, an anti-VEGF drug, is the most commonly used off level drug for diabetic retinopathy (DR). The present study was to evaluate the chitosan-coated poly (lactide-co-glycolic acid) nanoparticles (CS-PLGA NPs) for sustained and effective delivery of bevacizumab to posterior ocular tissues. The penetration of NP through sclera was studied by confocal laser scanning microscopy (CLSM). For pharmacokinetic study, bevacizumab loaded NPs were administered into the rat eye through subconjunctival injection (SCJ) and pharmacokinetic parameters were compared to drug solution. CLSM and pharmacokinetic study showed better penetration of formulation and higher concentration of bevacizumab in posterior ocular tissues. In retinopathy model, CS-PLGA NPs by SCJ route showed more reduction of VEGF level in retina than the topical and intravitreal administration of formulation. Thus, CS-coated PLGA NPs can be potentially useful as carriers to target retina.

In vitro dissolution testing models of ocular implants for posterior segment drug delivery

The delivery of drugs to the posterior segment of the eye remains a tremendously difficult task. Prolonged treatment in conventional intravitreal therapy requires injections that are administered frequently due to the rapid clearance of the drug molecules. As an alternative, intraocular implants can offer drug release for long-term therapy. However, one of the several challenges in developing intraocular implants is selecting an appropriate in vitro dissolution testing model. In order to determine the efficacy of ocular implants in drug release, multiple in vitro test models were emerging. While these in vitro models may be used to analyse drug release profiles, the findings may not predict in vivo retinal drug exposure as this is influenced by metabolic and physiological factors. This review considers various types of in vitro test methods used to test drug release of ocular implants. Importantly, it discusses the challenges and factors that must be considered in the development and testing of the implants in an in vitro setup.

Polymeric Implants for the Treatment of Intraocular Eye Diseases: Trends in Biodegradable and Non-Biodegradable Materials

Intraocular/Intravitreal implants constitute a relatively new method to treat eye diseases successfully due to the possibility of releasing drugs in a controlled and prolonged way. This particularity has made this kind of method preferred over other methods such as intravitreal injections or eye drops. However, there are some risks and complications associated with the use of eye implants, the body response being the most important. Therefore, material selection is a crucial factor to be considered for patient care since implant acceptance is closely related to the physical and chemical properties of the material from which the device is made. In this regard, there are two major categories of materials used in the development of eye implants: non-biodegradables and biodegradables. Although non-biodegradable implants are able to work as drug reservoirs, their surgical requirements make them uncomfortable and invasive for the patient and may put the eyeball at risk. Therefore, it would be expected that the human body responds better when treated with biodegradable implants due to their inherent nature and fewer surgical concerns. Thus, this review provides a summary and discussion of the most common non-biodegradable and biodegradable materials employed for the development of experimental and commercially available ocular delivery implants.

Fouling in ocular devices: implications for drug delivery, bioactive surface immobilization, and biomaterial design

The last 30 years has seen a proliferation of research on protein-resistant biomaterials targeted at designing bio-inert surfaces, which are prerequisite for optimal performance of implantable devices that contact biological fluids and tissues. These efforts have only been able to yield minimal results, and hence, the ideal anti-fouling biomaterial has remained elusive. Some studies have yielded biomaterials with a reduced fouling index among which high molecular weight polyethylene glycols have remained dominant. Interestingly, the field of implantable ocular devices has not experienced an outflow of research in this area, possibly due to the assumption that biomaterials tested in other body fluids can be translated for application in the ocular space. Unfortunately, progression in the molecular understanding of many ocular conditions has brought to the fore the need for treatment options that necessitates the use of anti-fouling biomaterials. From the earliest implanted horsehair and silk seton for glaucoma drainage to the recent mini telescopes for sight recovery, this review provides a concise incursion into the gradual evolution of biomaterials for the design of implantable ocular devices as well as approaches used to overcome the challenges with fouling. The implication of fouling for drug delivery, the design of immune-responsive biomaterials, as well as advanced surface immobilization approaches to support the overall performance of implantable ocular devices are also reviewed.

Therapeutic Ophthalmic Lenses: A Review

An increasing incidence of eye diseases has been registered in the last decades in developed countries due to the ageing of population, changes in lifestyle, environmental factors, and the presence of concomitant medical conditions. The increase of public awareness on ocular conditions leads to an early diagnosis and treatment, as well as an increased demand for more effective and minimally invasive solutions for the treatment of both the anterior and posterior segments of the eye. Despite being the most common route of ophthalmic drug administration, eye drops are associated with compliance issues, drug wastage by lacrimation, and low bioavailability due to the ocular barriers. In order to overcome these problems, the design of drug-eluting ophthalmic lenses constitutes a non-invasive and patient-friendly approach for the sustained drug delivery to the eye. Several examples of therapeutic contact lenses and intraocular lenses have been developed, by means of different strategies of drug loading, leading to promising results. This review aims to report the recent advances in the development of therapeutic ophthalmic lenses for the treatment and/or prophylaxis of eye pathologies (i.e., glaucoma, cataract, corneal diseases, or posterior segment diseases) and it gives an overview of the future perspectives and challenges in the field.

Ocular Drug Delivery

Although the eye is an accessible organ for direct drug application, ocular drug delivery remains a major challenge due to multiple barriers within the eye. Key barriers include static barriers imposed by the cornea, conjunctiva, and retinal pigment epithelium and dynamic barriers including tear turnover and blood and lymphatic clearance mechanisms. Systemic administration by oral and parenteral routes is limited by static blood-tissue barriers that include epithelial and endothelial layers, in addition to rapid vascular clearance mechanisms. Together, the static and dynamic barriers limit the rate and extent of drug delivery to the eye. Thus, there is an ongoing need to identify novel delivery systems and approaches to enhance and sustain ocular drug delivery. This chapter summarizes current and recent experimental approaches for drug delivery to the anterior and posterior segments of the eye.

A drug refillable device for transscleral sustained drug delivery to the retina

Continuous drug administration with better adherence to treatment and less invasive procedures is important in treating retinal diseases such as age-related macular disease. In this study, we report a drug-refillable device consisting of a silicone reservoir and an injectable gelatin/chitosan gel (iGel). The silicone reservoir was fabricated with polydimethylsiloxane (PDMS) using a computer-aided design and manufacturing to have micropores at a releasing side for uniaxial release to the sclera. A stainless steel wire and sheet were combined in the side and bottom of the reservoir to ensure flexibility and to fit on the curvature of the eyeball and prevent irritation to the sclera through the bottom of the reservoir. The drug was injected and formulated in the reservoir by in situ crosslinking of gelatin/chitosan gel with the crosslinker; 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride. The in vitro release study using fluorescein molecules showed that the release rate from encapsulated iGel in the reservoir was slower than that from the original iGel. After reinjecting the iGel into the reservoir, the same release profile as the first injection was observed. The reservoir containing iGel was placed on the sclera of a rabbit and the distribution of 150 kDa fluorescein isothiocyanate-dextran (FD150) in the retina and choroid/retinal pigment epithelium (choroid/RPE) was studied. The cryosections showed that FD150 was observed in the choroid/RPE. Homogenates of the retina and choroid/RPE showed fluorescence during 12 weeks implantation, indicating the drug could be delivered to the retina by using the device. The drug filling was successful into the reservoir implanted on the sclera through the conjunctiva by using a needle. In conclusion, the refillable drug delivery device is a promising tool to administer drugs long-term by reinjection with less invasiveness to intraocular tissues.

Drug delivery devices for retinal diseases

Retinal degenerative diseases are a leading cause of irreversible blindness and visual impairment, affecting millions of people worldwide. Although intravitreal injection can directly deliver drugs to the posterior segment of the eye, it is invasive and associated with serious side effects. The design of drug delivery systems targeting the posterior segment of the eye in a less invasive manner has still been challenging because of various anatomical and physiological barriers. In this review, we provide an overview of the current implant device-based approaches used for treating retinal degenerative diseases. We then offer our perspectives on future directions and challenges that remain for developing more effective device-based therapies for retinal diseases.

Chitosan-coated PLGA nanoparticles of bevacizumab as novel drug delivery to target retina: optimization, characterization, and in vitro toxicity evaluation

In several ocular diseases, the vascular endothelial growth factor (VEGF) level has been found to be upregulated. Bevacizumab, an anti-VEGF drug, is the most commonly used off level drug for these conditions. Delivery of drug to the posterior site is desired for the effective management of these diseases. The present study was to develop and optimize the chitosan (CS)-coated poly(lactide-co-glycolic acid) (PLGA) nanoparticles (NPs) of bevacizumab for sustained and effective delivery to posterior ocular tissues. NPs were prepared by double emulsion solvent evaporation method and optimized for various variables (i.e., CS concentration, PLGA content, polyvinyl alcohol (PVA) concentration, and sonication time) by employing a 4-factor 3-level Box-Behnken statistical design. NPs were characterized for particle size, polydispersity index (PDI), entrapment efficiency (EE), and in vitro release. Transscleral flux was determined through goat sclera, and ocular tolerance assay was done by Hen's Egg Test chorioallantoic membrane method. The particle size and PDI of the optimized NPs were 222.28 ± 7.45 nm and 0.19 ± 0.08, respectively. The developed NPs showed an EE of 69.26 ± 1.31% with an extended release profile. The flux was significantly higher that is, 0.3204 ± 0.026 μg/cm²/h for the NPs compared to drug solution. Thus, CS-coated PLGA NPs can be potentially useful as ocular drug carriers to target retina.

The Future of Intravesical Drug Delivery for Non-Muscle Invasive Bladder Cancer

Despite being the fifth most common cancer in the United States, minimal progress has been made in the treatment of bladder cancer in over a decade. Intravesical instillation of Bacillus Calmette-Guerin (BCG) for the treatment of non-muscle invasive bladder cancer (NMIBC) has been in use for over 30 years and remains the standard treatment in cases of intermediate and high risk disease. Despite the relative success of intravesical BCG, unmet needs in the treatment of NMIBC persist. These challenges include disease recurrence and progression even with treatment with BCG, as well as issues regarding its availability and patient tolerability. The inherent properties of the bladder pose the biggest obstacle to developing effective intravesical treatments for NMIBC. Current research is now focusing on methods to improve the delivery of intravesical therapies. The objective of this review is to discuss novel intravesical drug delivery systems and how they are addressing these challenges in the treatment of NMIBC.

Investigation of Diffusion Characteristics through Microfluidic Channels for Passive Drug Delivery Applications

Microfluidics has many drug delivery applications due to the ability to easily create complex device designs with feature sizes reaching down to the 10s of microns. In this work, three different microchannel designs for an implantable device are investigated for treatment of ocular diseases such as glaucoma, age-related macular degeneration (AMD), and diabetic retinopathy. Devices were fabricated using polydimethylsiloxane (PDMS) and soft lithography techniques, where surface chemistry of the channels was altered using 2-[methoxy(polyethyleneoxy)propyl]trimethoxysilane (PEG-silane). An estimated delivery rate for a number of common drugs was approximated for each device through the ratio of the diffusion coefficients for the dye and the respective drug. The delivery rate of the model drugs was maintained at a physiological condition and the effects of channel design and surface chemistry on the delivery rate of the model drugs were recorded over a two-week period. Results showed that the surface chemistry of the device had no significant effect on the delivery rate of the model drugs. All designs were successful in delivering a constant daily dose for each model drug.

A flexible device for ocular iontophoretic drug delivery

In this work, a flexible ocular iontophoretic device, which can be fabricated by batch processing, is reported. In vivo experiments were conducted on rabbit eyes, and the results demonstrated this device could realize ocular iontophoresis effectively, simply, and conveniently. Compared to conventional eye cups, it can be placed under the eyelid and can deliver ions through a small area on the eyeball, reducing tissue damage caused by the drug during ion penetration. Owing to the flexibility of the device, the device can be easily seated under the eyelid stably during iontophoresis. Manganese ions as a tracer for detection of optic nerve damage were delivered into rabbit eyes by this iontophoretic device. Under 1 mA for 600 s, the average Mn(2+) concentration in the eye ball after iontophoresis was 102 ng/ml, while the one in the control group was 23 ng/ml. Using 2 mA for 600 s, the average concentration was 271 ng/ml, while it was 38 ng/ml in the control group. Thermal injury during iontophoresis was not observed under an applied current of no more than 2 mA for no longer than 10 min, with the local temperature less than 38 °C, measured by an infrared thermal imager.

Single compartment drug delivery

Drug design is built on the concept that key molecular targets of disease are isolated in the diseased tissue. Systemic drug administration would be sufficient for targeting in such a case. It is, however, common for enzymes or receptors that are integral to disease to be structurally similar or identical to those that play important biological roles in normal tissues of the body. Additionally, systemic administration may not lead to local drug concentrations high enough to yield disease modification because of rapid systemic metabolism or lack of sufficient partitioning into the diseased tissue compartment. This review focuses on drug delivery methods that physically target drugs to individual compartments of the body. Compartments such as the bladder, peritoneum, brain, eye and skin are often sites of disease and can sometimes be viewed as "privileged," since they intrinsically hinder partitioning of systemically administered agents. These compartments have become the focus of a wide array of procedures and devices for direct administration of drugs. We discuss the rationale behind single compartment drug delivery for each of these compartments, and give an overview of examples at different development stages, from the lab bench to phase III clinical trials to clinical practice. We approach single compartment drug delivery from both a translational and a technological perspective.

Design Optimization of an Implantable Device Concept for Passive Ocular Drug Delivery

This paper presents an implantable device concept with applications for treating ocular diseases such as glaucoma, age-related macular degeneration (AMD), diabetic retinopathy, and retinitis pigmentosa. The design of a biodegradable drug delivery device concept consisting of a polydimethylsiloxane (PDMS) shell with a fluid reservoir and micro/nanofluidic tubes that allow the drug to be stored and delivered at a specified rate is discussed. Computational fluid dynamics simulations were conducted through various tube configurations in order to obtain the drug diffusion characteristics. The results from the simulation studies revealed information related to drug transport under varying design parameters. The design simulations were conducted with a desired rate. Based on results from several simulations, an optimization study was conducted to achieve the required dosage for about 2 years. The results obtained from the optimization study shows that the device concept can be extended for different drugs to treat ocular diseases.

Anterior eye segment drug delivery systems: current treatments and future challenges

New technologies for delivery of drugs, such as small molecules and biologics, are of growing interest among clinical and pharmaceutical researchers for use in treating anterior segment eye disease. The challenge is to deliver effective drugs at therapeutic concentrations to the targeted ocular tissue with minimal side effects. To achieve this, a better understanding of the unmet needs, what is required of the various methods of delivery to achieve successful delivery, and the potential challenges of anterior segment drug delivery is necessary and the primarily aim of this review. This review covers the various physiological and anatomical barriers that exist for effective delivery to the targeted tissue of the eye, the pathological conditions of the anterior segment, and the unmet needs for treatment of these ocular diseases. Second, it reviews the novel delivery technologies that have the potential to maintain and/or improve the drug's therapeutic index and improving both patient adherence for chronic therapy and potential patient outcomes. This review bridges the pharmaceutical and clinical research/challenges and provides a detailed overview of anterior segment drug delivery accomplishments thus far, for researchers and clinicians.

Reservoir-based drug delivery systems utilizing microtechnology

This review covers reservoir-based drug delivery systems that incorporate microtechnology, with an emphasis on oral, dermal, and implantable systems. Key features of each technology are highlighted such as working principles, fabrication methods, dimensional constraints, and performance criteria. Reservoir-based systems include a subset of microfabricated drug delivery systems and provide unique advantages. Reservoirs, whether external to the body or implanted, provide a well-controlled environment for a drug formulation, allowing increased drug stability and prolonged delivery times. Reservoir systems have the flexibility to accommodate various delivery schemes, including zero order, pulsatile, and on demand dosing, as opposed to a standard sustained release profile. Furthermore, the development of reservoir-based systems for targeted delivery for difficult to treat applications (e.g., ocular) has resulted in potential platforms for patient therapy.

Design of an implantable device for ocular drug delivery

Ocular diseases, such as, glaucoma, age-related macular degeneration (AMD), diabetic retinopathy, and retinitis pigmentosa require drug management in order to prevent blindness and affecting million of adults in USA and worldwide. There is an increasing need to develop devices for drug delivery to address ocular diseases. This study focuses on the design, simulation, and development of an implantable ocular drug delivery device consisting of micro-/nanochannels embedded between top and bottom covers with a drug reservoir made from polydimethylsiloxane (PDMS) which is silicon-based organic and biodegradable polymer. Several simulations were carried out with six different micro-channel configurations in order to see the feasibility for ocular drug delivery applications. Based on the results obtained, channel design of osmotic I and osmotic II satisfied the diffusion rates required for ocular drug delivery. Finally, a prototype illustrating the three components of the drug delivery design is presented. In the future, the device will be tested for its functionality and diffusion characteristics.

Preparation of a novel floating ring capsule-type dosage form for stomach specific delivery

Study objectives were to develop a unique floating ring capsule dosage form which combines gastric soluble and insoluble portions, and to evaluate its suitability for stomach specific drug delivery. New floating ring capsules were developed using different polymers and were compared for various parameters. The formulation with HPMC and sodium CMC has better floating properties. The effects of polymers concentration on drug release were studies by in vitro release studies. The interaction studies of combined drug with polymers were determined using FT-IR spectroscopy. The entrapped air within the gel barrier and lower densities of HPMC and sodium CMC resulted in better floating behavior. Steady slow gel formations showed prolonged drug release. The in vitro release rates were generally found to be faster with low concentration of carbopol showing release within 2 h, while formulations containing high amount of HPMC showed release in 8 h. In particular, the higher concentration of HPMC formulation shows the best drug release performance. A very low change in peak shift was observed only with sodium alginate formulations. Further, FT-IR measurements confirmed the absence of any chemical interactions. Results indicate that new floating ring capsule is a promise dosage form for stomach specific delivery.

Photoresponsive PEG-anthracene grafted hyaluronan as a controlled-delivery biomaterial

Ophthalmic drug delivery to the posterior segment of the eye could benefit from a responsive controlled drug delivery system with light or laser inducible changes. For example, the delivery of age-related macular degeneration drugs requires invasive monthly injections making long-term photoresponsive drug delivery a desirable option. The feasibility of this may be facilitated by both the transparency of the eye and the advanced technology in ophthalmic lasers. Hyaluronic acid photogels that are compatible with retinal pigment epithelial cell lines are shown here to deliver a variety of small and large model drugs over the long term (months). Varying UV exposures resulted in decreases/increases or the turning off and on of delivery, potentially allowing the therapy to be tailored to suit the patient and the disease.

Drug delivery strategies for therapeutic angiogenesis and antiangiogenesis

INTRODUCTION

Angiogenesis is essential to human biology and of great clinical significance. Excessive or reduced angiogenesis can result in, or exacerbate, several disease states, including tumor formation, exudative age-related macular degeneration (AMD) and ischemia. Innovative drug delivery systems can increase the effectiveness of therapies used to treat angiogenesis-related diseases.

AREAS COVERED

This paper reviews the basic biology of angiogenesis, including current knowledge about its disruption in diseases, with the focus on cancer and AMD. Anti- and proangiogenic drugs available for clinical use or in development are also discussed, as well as experimental drug delivery systems that can potentially improve these therapies to enhance or reduce angiogenesis in a more controlled manner.

EXPERT OPINION

Laboratory and clinical results have shown pro- or antiangiogenic drug delivery strategies to be effective in drastically slowing disease progression. Further research in this area will increase the efficacy, specificity and duration of these therapies. Future directions with composite drug delivery systems may make possible targeting of multiple factors for synergistic effects.

Effective electrophoretic mobilities and charges of anti-VEGF proteins determined by capillary zone electrophoresis

Macromolecules such as therapeutic proteins currently serve an important role in the treatment of eye diseases such as wet age-related macular degeneration and diabetic retinopathy. Particularly, bevacizumab and ranibizumab have been shown to be effective in the treatment of these diseases. Iontophoresis can be employed to enhance ocular delivery of these macromolecules, but the lack of information on the properties of these macromolecules has hindered its development. The objectives of the present study were to determine the effective electrophoretic mobilities and charges of bevacizumab, ranibizumab, and model compound polystyrene sulfonate (PSS) using capillary zone electrophoresis. Salicylate, lidocaine, and bovine serum albumin (BSA), which have known electrophoretic mobilities in the literature, were also studied to validate the present technique. The hydrodynamic radii and diffusion coefficients of BSA, bevacizumab, ranibizumab, and PSS were measured by dynamic light scattering. The effective charges were calculated using the Einstein relation between diffusion coefficient and electrophoretic mobility and the Henry equation. The results show that bevacizumab and ranibizumab have low electrophoretic mobilities and are net negatively charged in phosphate buffered saline (PBS) of pH 7.4 and 0.16M ionic strength. PSS has high negative charge but the electrophoretic mobility in PBS is lower than that expected from the polymer structure. The present study demonstrated that capillary electrophoresis could be used to characterize the mobility and charge properties of drug candidates in the development of iontophoretic drug delivery.