ICT reuse in socio-economic enterprises

Waste of electrical and electronic equipment management from the perspective of a circular economy: A Review

In addition to the difficulties involved in the management of conventional solid waste, the management of waste of electrical and electronic equipment (WEEE) is significantly more complex due to its unusual chemical composition and fast generation. Both developed and developing countries have been looking for solutions to deal with the problems caused by the growing flow of WEEE, especially regarding sustainable solutions based on reducing resource exploitation by the recovery of materials from this type of waste. In this context, this work presents a quali-quantitative and comprehensive literature review of the publications on the management of WEEE, from the perspective of a circular economy. The results showed that the first publications on the topic appear in 2006, with a significant increase from 2015, the year when the Circular Economy Action Plan was instituted in the European Community. The most prominent authors have been giving emphasis to researches on recycling, reuse and technologies for the recovery of materials/energy from WEEE. Nevertheless, few studies have been found focusing on the prevention/reduction in WEEE generation, priority actions of the WEEE management hierarchy. The works analysed show that the current management of WEEE, despite considering the circularity of materials, prioritizes the development of technological solutions of the end-of-pipe type, greatly represented by the recovery of materials, instead of preventing the generation, which may be detrimental to long-term sustainability. The work ends with the presentation of a SWOT-TOWS (strengths, weaknesses, opportunities and threats) analysis conducted to define the main strategies for the improvement of WEEE management from a circular economy perspective.

Viability of a circular economy for space debris

The orbital debris population is rapidly growing, increasing the chance of a Kessler-style collision event. We report a novel method for the production of estimates for the total monetary value of all debris objects and total mass of all objects currently in orbit. The method was devised using debris object data from the European Space Agency's DISCOS dataset, classified via a decision tree. 'Reuse' and 'scrap material' scenarios were developed. A high-end estimate for reuse shows a net value of $1.2 trillion. Median and low-end net value estimates of $600 billion and $570 billion, respectively, are probably judicious. A scrap material scenario produced a high mass estimate of 19,124 tonnes, a median of 6,978 tonnes and a low estimate of 5,312 tonnes. Development of in-orbit services will be crucial to solve the orbital debris problem. A future circular economy for space may be financially viable, with potentially beneficial consequences for risk reduction; resource efficiency; additional high-value employment; and climate-change knowledge, science, monitoring and early warning data.

Social innovation, goal orientation, and openness: insights from social enterprise hybrids

We empirically examine social innovation and openness through a survey of social enterprise hybrids in the United Kingdom (UK). Social innovation refers to new products, processes, and services that respond to grand challenges. Social enterprises pursue economic, social, and environmental goals but vary in their goal orientation, namely the relative importance ascribed to such goals. We first explore the relationships between commercial, social, and environmental goal orientation and social innovation performance. Next, we consider the moderating impact of openness to external knowledge and ideas on social innovation performance. Our analysis finds positive and significant relationships between commercial and social goal orientation and social innovation performance, but no relationship with environmental goal orientation. In addition, the use of external sources of knowledge and ideas positively strengthens these relationships for both commercial and social goal orientation but not for environmental goal orientation. Our results reveal some important influences on social innovation, openness, and hybrid organizing.

A Systematic Literature Review on Data and Information Required for Circular Manufacturing Strategies Adoption

In the extant literature, circular economy (CE) is considered a driver for sustainable development of the manufacturing sector, being it an industrial paradigm aiming at regenerating resources. CE is transferred to manufacturing companies through the adoption of different Circular Manufacturing (CM) strategies (e.g., recycling, remanufacturing, etc.). Nowadays, manufacturers are struggling to implement these strategies to limit their resource consumption and pollution generation. To enable their adoption, the extant literature unveiled the importance to control along the entire value chain different types of resource flows (i.e., material, energy, and information). Nevertheless, while for material and energy management some advancements were achieved, information management and sharing remains one of the major barriers in adopting these strategies. The present work, through a systematic literature review, aims to identify the relevant information and data required to support the manufacturer’s decision process in adopting and managing the different CM strategies to pursue the transition towards CM. Furthermore, based on the results obtained, this research proposes a theoretical framework. It elucidates the four main areas to be managed by manufacturers in adopting CM strategies and it provides to the manufacturer an overview of what should be updated and upgraded inside the company to embrace CM strategies.

The social benefits of WEEE re-use schemes. A cost benefit analysis for PCs in Spain

One goal of the new European legislation set out in WEEE Directive 2012/19/UE is the promotion of WEEE re-use schemes. However, some authors are rather sceptical about the contribution of WEEE re-use schemes to improve resource efficiency. In order to evaluate and to design adequate policy instruments, some authors recommend the cost-benefit analysis (CBA) as a compulsory first step. In this context, the main contribution of this paper is to enlarge the empirical literature by providing a CBA of re-use schemes versus recycling processes of PCs. The analysis is made for Spain by quantifying in monetary terms the social damages of environmental impacts such as climate change, human toxicity, particulate matter formation, metal depletion, etc. Our results suggest that promoting re-use against recycling (and consequently the need for manufacturing a new PC from raw materials) may reduce environmental costs by 45.20€ per PC. Those social benefits are mainly generated in the re-use preparation process and distribution activities, whereas the re-use scenario displays a worse performance in energy consumption. The difference in the distribution stage during the second life cycle originates from the fact that the ready to re-use product is produced locally, while the brand new product is manufactured and distributed from abroad, mainly Asia. These results provide valuable information to policymakers and think tanks willing to design support schemes for re-use over recycling operations.

Study of the uses of Information and Communication Technologies by Pain Treatment Unit Physicians

Adequate use of Information and Communication Technologies (ICTs) in health has been shown to save the patient and caregiver time, improve access to the health system, improve diagnosis and control of disease or treatment. All this results in cost savings, and more importantly, they help improve the quality of service and the lives of patients. The purpose of this study is to analyse the differences in the uses of this ICTs between those physicians that belong to Pain Treatment Units (PU) and other physicians that work in pain not linked to these PUs. An online survey, generated by Netquest online survey tool, was sent to both groups of professionals and the data collected was statistical analysed through a logistic regression methodology which is the Logit binomial model. Our results show that those physicians that belong to PUs use ICTs more frequently and consider it more relevant to their clinical practice.

An investigation of trends in precious metal and copper content of RAM modules in WEEE: Implications for long term recycling potential

Precious metal (PM) and copper content of dynamic-RAM modules placed on the market during 1991-2008 has been analysed by AAS following comminution and acid digestion. Linear regression analysis of compositional data ordered according to sample chronology was used to identify historic temporal trends in module composition resulting from changes in manufacturing practices, and to project future trends for use in more accurate assessment of future recycling potential. DRAM was found to be 'high grade' waste with: stable levels of gold and silver over time; 80% reduction in palladium content during 1991-2008; and 0.23g/module/year increase in copper content with a 75% projected increase from 2008 by 2020. The accuracy of future recycling potential projections for WEEE using current methods based on static compositional data from current devices is questionable due to likely changes in future device composition. The impact on recycling potential projections of waste laptops, smart phones, cell phones and tablets arising in Europe in 2020 resulting from a 75% increase in copper content is considered against existing projections using static compositional data. The results highlight that failing to consider temporal variations in PM content may result in significant discrepancies between projections and future recycling potential.

Understanding the role of waste prevention in local waste management: A literature review

Local waste management has so far been characterised by end-of-pipe solutions, landfilling, incineration, and recycling. End-of-pipe solutions build on a different mind-set than life cycle-based approaches, and for this reason, local waste managers are reluctant to consider strategies for waste prevention. To accelerate the transition of waste and resource management towards a more integrated management, waste prevention needs to play a larger role in the local waste management. In this review article, we collect knowledge from the scientific community on waste prevention of relevance to local waste management. We analyse the trends in the waste prevention literature by organising the literature into four categories. The results indicate an increasing interest in waste prevention, but not much literature specifically concerns the integration of prevention into the local waste management. However, evidence from the literature can inform local waste management on the prevention potential; the environmental and social effects of prevention; how individuals in households can be motivated to reduce waste; and how the effects of prevention measures can be monitored. Nevertheless, knowledge is still lacking on local waste prevention, especially regarding the methods for monitoring and how local waste management systems can be designed to encourage waste reduction in the households. We end the article with recommendations for future research. The literature review can be useful for both practitioners in the waste sector and for academics seeking an overview of previous research on waste prevention.

Potential reuse of small household waste electrical and electronic equipment: Methodology and case study

This study proposes a general methodology for assessing and estimating the potential reuse of small waste electrical and electronic equipment (sWEEE), focusing on devices classified as domestic appliances. Specific tests for visual inspection, function and safety have been defined for ten different types of household appliances (vacuum cleaner, iron, microwave, toaster, sandwich maker, hand blender, juicer, boiler, heater and hair dryer). After applying the tests, reuse protocols have been defined in the form of easy-to-apply checklists for each of the ten types of appliance evaluated. This methodology could be useful for reuse enterprises, since there is a lack of specific protocols, adapted to each type of appliance, to test its potential of reuse. After applying the methodology, electrical and electronic appliances (used or waste) can be segregated into three categories: the appliance works properly and can be classified as direct reuse (items can be used by a second consumer without prior repair operations), the appliance requires a later evaluation of its potential refurbishment and repair (restoration of products to working order, although with possible loss of quality) or the appliance needs to be finally discarded from the reuse process and goes directly to a recycling process. Results after applying the methodology to a sample of 87.7kg (96 units) show that 30.2% of the appliances have no potential for reuse and should be diverted for recycling, while 67.7% require a subsequent evaluation of their potential refurbishment and repair, and only 2.1% of them could be directly reused with minor cleaning operations. This study represents a first approach to the "preparation for reuse" strategy that the European Directive related to Waste Electrical and Electronic Equipment encourages to be applied. However, more research needs to be done as an extension of this study, mainly related to the identification of the feasibility of repair or refurbishment operations.

An in-depth literature review of the waste electrical and electronic equipment context: trends and evolution

The consumption of electrical and electronic equipment (EEE) is continuously increasing worldwide and, consequently, so is the amount of waste electrical and electronic equipment (WEEE) it generates at its end-of-life. In parallel to this growth, legislation related to this issue has been passed in different countries with the aim of improving the management of WEEE. In order to raise awareness about the situation in which the generation, composition, management or final treatment of this kind of waste currently finds itself, an extensive number of articles have been published around the world. The aim of this paper is to define and analyse the main areas of research on WEEE by offering a broader analysis of the relevant literature in this field published between 1992 and August 2014. The literature researched comprises 307 articles, which are analysed according to the topic they focus on (WEEE management, WEEE generation, WEEE characterisation, social aspects of WEEE, re-use of EEE or economic aspects of WEEE). In addition, a deeper analysis is also presented, which takes into account the temporal evolution (globally and by topic), location of the study, categories and subcategories analysed, etc.