Waste electrical and electronic equipment management in the educational institutions and governmental sector offices of Addis Ababa, Ethiopia

Reversing the damage: ecological restoration of polluted water bodies affected by pollutants due to anthropogenic activities

Aquatic ecosystems provide a large number of cultural, regulating, and supporting services to humans and play a pivotal role in sustaining freshwater-dependent ecosystems. However, an increase in human population coupled with economic growth in the last few decades has severely affected their functioning and ecological health. This has led to an increase in concentrations of pollutants originating from anthropogenic activities such as heavy metals, plastics, semi-volatile organic compounds, and endocrine disruptors. These pollutants provoke deleterious impacts on aquatic biodiversity and affect the water quality and functioning. In this paper, we discuss the sources and impacts of such pollutants as well as restoration techniques for reducing their impact on aquatic ecosystems. Several physical and chemical ecological restoration techniques, such as dredging, sediment capping, water diversion, adsorption, aeration, and flushing, can be employed to improve the water quality of water bodies. Additionally, biological techniques such as phytoremediation, phycoremediation, the use of biomembranes, and the construction of ecological floating beds can be employed to increase the population of aquatic organisms and improve the overall ecological health of aquatic ecosystems. Restoration techniques can effectively reduce the concentrations of suspended solids and dissolved phosphorus and increase the levels of dissolved oxygen. The restoration techniques for improving the ecological health of water bodies should not be limited to simply improving the water quality but should also focus on improving the biological processes and ecosystem functioning since it is essential to mitigate the adverse effects of pollutants and restore the vital ecosystem services provided by water bodies for future generations.

Design and application of secondary operation and maintenance supervision system based on AR modeling and indoor positioning

In order to facilitate the observation in the process of secondary equipment operation and maintenance supervision and the detection and tracking of operation and maintenance personnel, a secondary operation and maintenance supervision system based on AR modeling and indoor positioning is designed. The whole system is divided into seven levels and a unified information base, in which the basic level contains all kinds of secondary equipment; AR modeling layer uses augmented reality technology to create models for each secondary equipment in the basic layer, and determines the equipment position information based on ranging positioning technology; The data acquisition layer collects all kinds of original management data based on the constructed secondary equipment model; The data analysis layer reads and analyzes the information of the data acquisition layer through the data bus; The process support layer provides task scheduling support for the integrated management application based on the data analysis results; The integrated application layer uniformly monitors the secondary equipment based on the task scheduling results; The presentation layer is responsible for the interface presentation of all operation and maintenance and security management information of the system, and the unified information base provides data support for the whole system. The experimental results show that the secondary equipment model in the designed system has high definition, can obtain more image details, can realize the 3D display and real-time interaction of the secondary equipment operation and maintenance supervision results, and accurately mark the target and track for the staff.

Municipal solid waste management with recyclable potential in developing countries: Current scenario and future perspectives

Municipal solid waste (MSW) is a complex challenge to be solved worldwide, intensified in developing countries since in addition to economic and environmental aspects there is also the social aspect represented by the collector individual. From an integrative bibliographic review this study longitudinally analyses the socio-productive inclusion of collectors in the municipal solid waste management (MSWM) at an international level. Aiming: (a) to identify relevant articles describing/studies on MSWM with social inclusion of scavengers around the world; (b) to analyse these articles in order to present its main characteristics; (c) to describe municipal solid waste management with recyclable potential (MSWRP) with socio-productive inclusion of collectors; (d) the study provides a more detailed summary of MSWRP management in some developing countries: Brazil, China, India, Indonesia, Mexico, Nigeria and Pakistan; and (e) to provide a framework indicating the future practices and perspectives of MSWRP. As result, this study presents the paradigms and future questions for an effective improvement of WSWM, such as: Professional Training of Scavengers, Cultural Issues, Empowerment of Scavenger, Recycling Cooperatives and Cooperativism, Policy Issues and Recycling Chain, Management Systems and Process Improvement, Quality of Services Provided, Circular Economy and Informal Sector, Health Quality and Safety at Work, Barriers and Solutions for the Inclusion of the Informal Sector, Environmental, Economic and Social Benefits.

Antecedents of sustainable e-waste disposal behavior: the moderating role of gender

This study presents an integrative sustainable e-waste model, drawing on organismic integration theory and gender schema theory. E-waste behavior has attracted considerable attention in the cleaner production literature in recent years. However, there is growing debate, and little research has been conducted in developing countries, especially Pakistan, to investigate the motivational factors influencing sustainable e-waste behavior. This study empirically examines the different effects of motivational (intrinsic, identified, introjected, and external) regulations on sustainable e-waste disposal behavior and identifies whether customer gender moderates these effects. To address this gap, we recruited 209 households, and structural equation modeling (SEM) and multi-group modeling (MGM) techniques were used to test the proposed hypotheses using AMOS. When assessing customers' habits and external, introjected, identified, and intrinsic motivations in terms of gender differences, the SEM results revealed that female has more motivational sentiments and compliance to social norms for disposing e-waste behavior. The MGM results revealed that the effect of intrinsic motivation on sustainable e-waste disposal behavior is important for male customers, while the impact of external motivation is important for female customers. Identified motivation appears to be a significant predictor both for male and female customers. Finally, we briefly discuss the study's implications for theory and practice and highlight priorities for future research.

Effects of Extracellular Polymeric Substances and Specific Compositions on Enhancement of Copper Bioleaching Efficiency from Waste Printed Circuit Boards

Bioleaching has been proven to be an efficient and environment-friendly method for processing metalliferous ore and waste printed circuit boards (PCBs), a type of urban mine waste. Extracellular polymeric substances (EPS) play a major role in the attachment of bacteria to the surface of sulfide minerals. However, there are few reports on the effects of EPS components on the bioleaching of metals from PCBs. In this study, synthetic EPS were used to investigate the effects of the composition of exo-polymers on the bioleaching of copper from waste PCBs, including the process efficiency. The copper extraction rate in bioleaching assays with synthetic EPS was 11.7% greater than in those without synthetic EPS. Moreover, the composition of EPS was proven to be a crucial factor affecting the efficiency of copper bioleaching, with EPS containing arginine yielding the highest recovery (95.2% copper). Under the condition of 0.5 g/L synthetic EPS added at the early stage of log phase, the copper leaching efficiency from waste PCBs was highly improved. This study provides important insights into how to analyze the working mechanisms of EPS for a better recovery efficiency.

New Models to Reduce the Health Risks of Informal WEEE Recyclers in MTN Phone Village, Rumukurushi, Port Harcourt, Nigeria

Waste electrical and electronic equipment (WEEE) management in Port Harcourt, an oil-producing city in Nigeria, has become an environmental challenge for the location. WEEE recycling is predominantly managed by informal recyclers, who lack the skills to perform risk-free recycling, hence raising health risks to individuals in associated communities and degrading the environment. Formal recycling, which embraces the best practices for effective WEEE management, is faced with several limitations, such as a lack of detailed guidelines on waste recycling, reuse, and final disposal techniques, with no opportunities for landfilling. A qualitative approach was adopted for this study. Data were gathered via questionnaires and analysed graphically. A background literature review of the assessment of informal recycling methods and associated challenges was performed. Hence, a new concept for the local management of WEEE processing was introduced. This concept limits the role of informal recyclers to WEEE collection. In this case, informal recyclers are paid for WEEE collection; they no longer engage in further WEEE processing. The results show that 48% and 40% agree to partner and collaborate with government agencies, respectively. Conversely, 52% and 40% agree and strongly agree, respectively, to limit their activities to WEEE collection only if the government is willing to pay for the services.

Revisiting e-waste management practices in selected African countries

African countries are among the prime destinations of electronic waste (e-waste) also called Waste of Electrical and Electronic Equipment (WEEE), and have been challenged with the management of its environmental and health impacts. This paper was carried out to understand the e-waste sector and policy responses in selected African countries. Data for the study were generated from sources; such as policy documents, legislations and literature. Findings show that the import of WEEE is on rising in Africa while landfill and incineration continued to be widely used handling approaches. Countries studied lack WEEE specific national policies and stringent policy instruments to enforce proper collection and recycling systems. Despite the start-ups in emerging recycling operations, a major gap is that informal e-waste actors dominate the e-waste chain from collection to material extraction and refurbish activities through rudimentary tools that cannot detect toxic elements. Tackling the problem demands integrated multi-actor interventions with multiple stakeholders to reduce WEEE inflow on one hand, and ramping up safe recycling capacity on the other hand.

IMPLICATIONS

The article attempts to explain the electronic waste problem in African countries, the nature of existing policy responses and limitations, and ways forward to address policy gaps. Electronic waste is a global problem but with local impacts with the hazardous substances it contains. Because E-waste is still not well recognized health and environment threat, less attention is given for the problem especially in African countries making the uneducated youth more vulnerable to toxic elements. The epistemic community, hence, is supposed to write about it and develop knowledge so that evidences for policy decision making would grow. The focus is on Africa because the problem needs special attention. E-waste has been dumped in Africa for long time and people who work with such waste are mostly uneducated and vulnerable to toxic substances. This problem requires certain attention in the scholarly and policy community at the international level.

Inconsistencies of e-waste management in developing nations - Facts and plausible solutions

Electronic and electrical equipment (EEE) became an integral part of daily life and had an immense influence on the economy. The skyrocketing demand, progressive technologies, and high dependency resulted in inconceivable utilization of EEE. However, these scientific expansions shortened the life span of EEE, thereby generating massive volumes of waste electronic and electrical equipment (WEEE). On a global perspective, Oceania generates a per capita of 17.3 kg/inh (inhabitants), followed by Europe 16.6 kg/inh, America 11.6 kg/inh, Asia 4.2 kg/inh and the least contribution by Africa 1.9 kg/inh. As known, EEE comprises complex metallic and non-metallic fractions causing severe discrepancies within the ecosystem, endangering the living species; if not dealt with properly. Thus, there is a pressing need of immediate addressal on the effective e-waste management strategies both from developed and developing countries. On the spin side, the separation of the precious fractions from the EEE on the end-of-life may be a twin dimensional strategy of economic addition, and plummeting the alarming level threats to ecology. However, these menaces are well tackled by the developed countries to some extent by the stringent law enactments, establishing proper recycling facilities, and trading to the underdeveloped and developing nations. But, the majority of the developing and under developed nations lacks the statutes, gaps in policy making, socio-economic-cultural barriers, technology, and the appropriate treatment facilities. In addition, the review identified ten major shortfalls (10L's) refraining the effective e-waste management, especially in the developing and under developed nations. Among which, integration of the formal and informal sectors, mandated network registry, stringent law enforcements, regulated transboundary movements, manufacturers responsibility, consumer awareness and improved eco designs, investing on effective recycling facilities, and improved disposal facilities holds the key. Further, replacing the traditional and conventional procedures with the futuristic and eco-friendly approaches such as chelation, inducing ionic liquids, integrated processes or hybrid technologies, micro factories, photo catalysis, and green adsorption will substantially harness the current barriers of the e-waste management. Finally, the present review will be a thorough glancing for the future research of e-waste management of meso-micro-macro scales.