Environmental comparison of banana waste valorisation strategies under a biorefinery approach

Life cycle of bioethanol production from blends of different food waste

Food waste offers a potential source for bioethanol production, but productivity depends on the chemical composition of the raw materials and the processes involved. However, assessment of the environmental sustainability of these processes is often absent and can be carried out using the Life Cycle Assessment (LCA) methodology. This study aimed to perform an LCA on bioethanol production from mixtures of different wastes, including tubers, fruits, and processed foods, focusing on the gate-to-gate phase. The inventory included a standard scenario and an optimized scenario, which eliminated drying and replaced the phosphate buffer with citric acid. To assess impacts and damages, the Ecoinvent 3.4 database and the ReCiPe 2016 method were used, while uncertainty analysis was carried out using Monte Carlo simulation with the aid of SimaPro software version 8.5.0.0. Results indicate that processed food blends generate the greatest environmental impacts in all scenarios evaluated. The fermentation stage is the largest contributor to environmental impacts and damage when energy consumption is considered. Without energy consumption, pretreatment and enzymatic hydrolysis become more significant. The most notable categories of environmental impacts and damages are Global Warming Potential (GWP) and Resources. The optimized scenario showed a lower environmental impact compared to the standard scenario, highlighting its potential for more sustainable bioethanol production.

Evaluation of mechanically extracted banana fibers from pseudostem layers: A sustainable textile raw material

The separation of banana fibers from the pseudostem layers and the properties of two Thai banana cultivars, Musa acuminata (Kluai Hom) and Musa sapientum L. (Kluai Namwa) were investigated. The pseudostems were divided into three layers: outer (layer 1), middle (layer 2), and inner (layer 3). Fibers were extracted using a semi-automatic machine and subjected to chemical treatments. Results showed that layer 3 of Musa sapientum L. pseudostems yielded the highest amount of fibers with the lightest color. Fibers from layer 1 of Musa sapientum L. exhibited the highest tensile strength (606.90 g/denier) and elongation at break (9.54 %), higher than in all layers of Musa acuminata. SEM analysis revealed that chemically treated Musa acuminata fibers were less separated and broken than Musa sapientum L. fibers because the chemicals disrupted the lignocellulose bonds. Cross-sectional images showed larger lumens and more pronounced fiber group separation in Musa sapientum L. The outer layer of Musa sapientum L. pseudostem provided fibers with superior strength and elongation, demonstrating high potential as a sustainable raw material for the textile industry.

Enhancement in Bacterial Cellulolytic Enzyme Production Using Acid-Pretreated Banana Peel Waste: A Comparative Evaluation

Banana peel waste is one of the major contributors in the issue raised from solid waste, however, it can be valorized effectively due to high content of cellulose and hemicellulose. Significant conversion of banana waste includes cellulolytic enzymes and bioenergy production. In the present study, bacterial cellulase was produced using raw banana peel and ripe banana peel under SSF. Additionally, impact of acid pretreatment was investigated as one of strategy to improve cellulolytic enzyme production. A comparative evaluation of raw and ripe banana peels showed that ripe banana peels showed better enzyme production after pretreatment with 0.5% dilute HCl acid. In the series of enhancement of the enzyme production, temperature and pH of the SSF medium were also investigated, and found temperature 35 °C and pH 6.0 were optimum to produce maximum 3.5-U/ml FPA, 39-U/ml BGL, and 54-U/ml EG in 18-h SSF incubation. The study presented eco-friendly waste management to produce industrial enzyme for its promising application in waste valorization and biorefinery area.

Banana Peel (Musa ABB cv. Nam Wa Mali-Ong) as a Source of Value-Adding Components and the Functional Properties of Its Bioactive Ingredients

Banana peel (BP) is the primary by-product generated during banana processing which causes numerous environmental issues. This study examines the physical attributes, proximate analysis, glycoarray profiling, antioxidant abilities, and prebiotic activity of BP. The analysis demonstrated that carbohydrates constituted the primary components of BP and the glycoarray profiling indicated that BP contains multiple pectin and hemicellulose structures. BP also contained phenolic compounds, including (+)-catechin and gallic acid, flavonoid compounds, and antioxidant activities. BP demonstrated prebiotic effects by promoting the proliferation of advantageous gut bacteria while inhibiting the growth of harmful bacteria. The prebiotic index scores demonstrated that BP exhibited a greater capacity to promote the growth of beneficial bacteria in comparison to regular sugar. The study demonstrated the potential of the BP as a valuable source of dietary fibre, bioactive compounds, and prebiotics. These components have beneficial characteristics and can be utilised in the production of food, feed additives, and functional food.

Development of water-resistant paper using chitosan and plant-based wax extracted from banana leaves

On being exposed to water, cellulose paper swells and its mechanical properties become weak. In this study, natural wax with an average particle size of 12.3 μm extracted from banana leaves was mixed with chitosan to prepare coatings applied on paper surfaces. Chitosan efficiently dispersed banana leaf-extracted wax on paper surfaces. The mixed chitosan and wax coatings considerably influenced paper properties, including yellowness, whiteness, thickness, wettability, water and oil sorption, and mechanical properties. The coating induced hydrophobicity in the paper, resulting in a significant increase in the water contact angle from 65.1 ± 7.7° (uncoated paper) to 123.2 ± 2.1°, and a decrease in water absorption by ⁓64 % to 52.6 ± 1.9 %. The coated paper demonstrated an oil sorption capacity of 212.2 ± 2.8 %, which was ⁓43 % greater than that of the uncoated paper, and the tensile strength of the coated paper improved by 43 % under wet conditions compared to the uncoated paper. Additionally, a separation of oil in water was observed for the chitosan/wax coated paper. Based on these promising results, the paper coated with chitosan and wax could be used for direct-contact packaging applications.

Recent advances in lignocellulosic and algal biomass pretreatment and its biorefinery approaches for biochemicals and bioenergy conversion

As the global demand for sustainable energy increases, lignocellulosic (such as agricultural residues, forest biomass, municipal waste, and dedicated energy crops) and algal (including macroalgae and microalgae) biomass have attracted considerable attention, because of their high availability of carbohydrates. This is a potential feedstock to produce biochemical and bioenergy. Pretreatment of biomass can disrupt their complex structure, increasing conversion efficiency and product yield. Therefore, this review comprehensively discusses recent advances in different pretreatments (physical, chemical, physicochemical, and biological pretreatments) for lignocellulosic and algal biomass and their biorefining methods. Life cycle assessment (LCA) which enables the quantification of the environmental impact assessment of a biorefinery also be introduced. Biorefinery processes such as raw material acquisition, extraction, production, waste accumulation, and waste conversion are all monitored under this concept. Nevertheless, there still exist some techno-economic barriers during biorefinery and extensive research is still needed to develop cost-effective processes.

An Insight into Microbial Inoculants for Bioconversion of Waste Biomass into Sustainable "Bio-Organic" Fertilizers: A Bibliometric Analysis and Systematic Literature Review

The plant-microbe holobiont has garnered considerable attention in recent years, highlighting its importance as an ecological unit. Similarly, manipulation of the microbial entities involved in the rhizospheric microbiome for sustainable agriculture has also been in the limelight, generating several commercial bioformulations to enhance crop yield and pest resistance. These bioformulations were termed biofertilizers, with the consistent existence and evolution of different types. However, an emerging area of interest has recently focused on the application of these microorganisms for waste valorization and the production of "bio-organic" fertilizers as a result. In this study, we performed a bibliometric analysis and systematic review of the literature retrieved from Scopus and Web of Science to determine the type of microbial inoculants used for the bioconversion of waste into "bio-organic" fertilizers. The Bacillus, Acidothiobacillus species, cyanobacterial biomass species, Aspergillus sp. and Trichoderma sp. were identified to be consistently used for the recovery of nutrients and bioconversion of wastes used for the promotion of plant growth. Cyanobacterial strains were used predominantly for wastewater treatment, while Bacillus, Acidothiobacillus, and Aspergillus were used on a wide variety of wastes such as sawdust, agricultural waste, poultry bone meal, crustacean shell waste, food waste, and wastewater treatment plant (WWTP) sewage sludge ash. Several bioconversion strategies were observed such as submerged fermentation, solid-state fermentation, aerobic composting, granulation with microbiological activation, and biodegradation. Diverse groups of microorganisms (bacteria and fungi) with different enzymatic functionalities such as chitinolysis, lignocellulolytic, and proteolysis, in addition to their plant growth promoting properties being explored as a consortium for application as an inoculum waste bioconversion to fertilizers. Combining the efficiency of such functional and compatible microbial species for efficient bioconversion as well as higher plant growth and crop yield is an enticing opportunity for "bio-organic" fertilizer research.

Offsetting the environmental impacts of single or multi-product biorefineries from wheat straw

Moving toward a bioeconomy system is fundamental to climate change mitigation, nevertheless, the biotechnological routes should guarantee an environmental sustainability. Isobutene, a precursor in several industrial applications, is one of those chemicals that the environmental effects of its bio-based production have been scarcely explored. This study aims to assess the environmental performance of two biorefinery systems: the first one focuses only on the production of isobutene (I) and the second one on the co-production with lignin (I + L), both from the valorisation of wheat straw. The Life Cycle Assessment methodology is used to determine the environmental impacts considering mid-point and end-point categories. Biorefineries report 0.65 and 1.32 kg CO₂-eq per kg of biomass processed for I and I + L system, respectively. The most affected endpoint damage category corresponds to Human Health, regardless of the scenarios. Moreover, the pre-treatment stage constitutes the main hotspot of both systems considering midpoint and endpoint perspectives.