Modification of ceramic microfilters with colloidal zirconia to promote the adsorption of viruses from water

A Roadmap for Building Waterborne Virus Traps

Outbreaks of waterborne viruses pose a massive threat to human health, claiming the lives of hundreds of thousands of people every year. Adsorption-based filtration offers a promising facile and environmentally friendly approach to help provide safe drinking water to a world population of almost 8 billion people, particularly in communities that lack the infrastructure for large-scale facilities. The search for a material that can effectively trap viruses has been mainly driven by a top-down approach, in which old and new materials have been tested for this purpose. Despite substantial advances, finding a material that achieves this crucial goal and meets all associated challenges remains elusive. We suggest that the road forward should strongly rely on a complementary bottom-up approach based on our fundamental understanding of virus interactions at interfaces. We review the state-of-the-art physicochemical knowledge of the forces that drive the adsorption of viruses at solid-water interfaces. Compared to other nanometric colloids, viruses have heterogeneous surface chemistry and diverse morphologies. We advocate that advancing our understanding of virus interactions would require describing their physicochemical properties using novel descriptors that reflect their heterogeneity and diversity. Several other related topics are also addressed, including the effect of coadsorbates on virus adsorption, virus inactivation at interfaces, and experimental considerations to ensure well-grounded research results. We finally conclude with selected examples of materials that made notable advances in the field.

Removal of MS2 and fr Bacteriophages Using MgAl2O4-Modified, Al2O3-Stabilized Porous Ceramic Granules for Drinking Water Treatment

Point-of-use ceramic filters are one of the strategies to address problems associated with waterborne diseases to remove harmful microorganisms in water sources prior to its consumption. In this study, development of adsorption-based ceramic depth filters composed of alumina platelets was achieved using spray granulation (calcined at 800 °C). Their virus retention performance was assessed using cartridges containing granular material (4 g) with two virus surrogates: MS2 and fr bacteriophages. Both materials showed complete removal, with a 7 log10 reduction value (LRV) of MS2 up to 1 L. MgAl2O4-modified Al2O3 granules possessed a higher MS2 retention capacity, contrary to the shortcomings of retention limits in pure Al2O3 granules. No significant decline in the retention of fr occurred during filtration tests up to 2 L. The phase composition and morphology of the materials were preserved during filtration, with no magnesium or aluminum leakage during filtration, as confirmed by X-ray diffractograms, electron micrographs, and inductively coupled plasma-optical emission spectrometry. The proposed MgAl2O4-modified Al2O3 granular ceramic filter materials offer high virus retention, achieving the criterion for virus filtration as required by the World Health Organization (LRV ≥ 4). Owing to their high thermal and chemical stability, the developed materials are thus suitable for thermal and chemical-free regeneration treatments.

Comparative effectiveness of membrane technologies and disinfection methods for virus elimination in water: A review

The pandemic of the 2019 novel coronavirus disease (COVID-19) has brought viruses into the public horizon. Since viruses can pose a threat to human health in a low concentration range, seeking efficient virus removal methods has been the research hotspots in the past few years. Herein, a total of 1060 research papers were collected from the Web of Science database to identify technological trends as well as the research status. Based on the analysis results, this review elaborates on the state-of-the-art of membrane filtration and disinfection technologies for the treatment of virus-containing wastewater and drinking water. The results evince that membrane and disinfection methods achieve a broad range of virus removal efficiency (0.5-7 log reduction values (LRVs) and 0.09-8 LRVs, respectively) that is attributable to the various interactions between membranes or disinfectants and viruses having different susceptibility in viral capsid protein and nucleic acid. Moreover, this review discusses the related challenges and potential of membrane and disinfection technologies for customized virus removal in order to prevent the dissemination of the waterborne diseases.

Make it clean, make it safe: A review on virus elimination via adsorption

Recently, the potential dangers of viral infection transmission through water and air have become the focus of worldwide attention, via the spread of COVID-19 pandemic. The occurrence of large-scale outbreaks of dangerous infections caused by unknown pathogens and the isolation of new pandemic strains require the development of improved methods of viruses' inactivation. Viruses are not stable self-sustaining living organisms and are rapidly inactivated on isolated surfaces. However, water resources and air can participate in the pathogens' diffusion, stabilization, and transmission. Viruses inactivation and elimination by adsorption are relevant since they can represent an effective and low-cost method to treat fluids, and hence limit the spread of pathogen agents. This review analyzed the interaction between viruses and carbon-based, oxide-based, porous materials and biological materials (e.g., sulfated polysaccharides and cyclodextrins). It will be shown that these adsorbents can play a relevant role in the viruses removal where water and air purification mostly occurring via electrostatic interactions. However, a clear systematic vision of the correlation between the surface potential and the adsorption capacity of the different filters is still lacking and should be provided to achieve a better comprehension of the global phenomenon. The rationalization of the adsorption capacity may be achieved through a proper physico-chemical characterization of new adsorbents, including molecular modeling and simulations, also considering the adsorption of virus-like particles on their surface. As a most timely perspective, the results on this review present potential solutions to investigate coronaviruses and specifically SARS-CoV-2, responsible of the COVID-19 pandemic, whose spread can be limited by the efficient disinfection and purification of closed-spaces air and urban waters.

Electropositive Nanodiamond-Coated Quartz Microfiber Membranes for Virus and Dye Filtration

Electropositive membranes demonstrating high flux at low pressure differentials show great promise as universal separation platforms for viruses and other charged entities when centralized systems of water and power are scarce. However, the fabrication of a suitably stable membrane with optimal electrostatic characteristics remains a challenge. Here, hydrogenated detonation nanodiamond was loaded onto a quartz microfiber support membrane and coupled to the membrane surface under a high vacuum annealing process. The fabricated membranes display a zeta potential of +45 mV at pH 7 and an isoelectric point around pH 11. We show that the nanodiamond coating is robust to prolonged periods of pressurized water flow by performing extensive zeta potential measurements over time, and water filtration tests demonstrated excellent membrane retention for the electronegative dye molecule acid black 2, and at least a 6.2 log10 reduction in MS2 bacteriophage from feed waters (>99.9999%).

Enhanced virus filtration in hybrid membranes with MWCNT nanocomposite

Membrane separation is proved to be a powerful tool for several applications such as wastewater treatment or the elimination of various microorganisms from drinking water. In this study, the efficiency of inorganic composite-based multi-walled carbon nanotube (MWCNT) hybrid membranes was investigated in the removal of MS2 bacteriophages from contaminated water. With this object, multi-walled carbon nanotubes were coated with copper(I) oxide, titanium(IV) oxide and iron(III) oxide nanoparticles, respectively, and their virus removal capability was tested in both batch and flow experiments. Considering the possible pH range of drinking water, the filtration tests were carried out at pH 5.0, 7.5 and 9.0 as well. The extent of MS2 removal strongly depended on the pH values for each composite, which can be due to electrostatic interactions between the membrane and the virus. The most efficient removal (greater than or equal to 99.99%) was obtained with the Cu2O-coated MWCNT membrane in the whole pH range. The fabricated nanocomposites were characterized by X-ray diffraction, specific surface area measurement, dynamic light scattering, zeta potential measurement, Raman spectroscopy, transmission electron microscopy and scanning electron microscopy. This study presents a simple route to design novel and effective nanocomposite-based hybrid membranes for virus removal.

Solar Photocatalytic Degradation of Trace Organic Pollutants in Water by Bi(0)-Doped Bismuth Oxyhalide Thin Films

Herein, we demonstrate the fabrication of Bi(0)-doped bismuth oxyhalide solid solution films for the removal of trace organic pollutants (TrOPs) in water. With the advantage of a viscous AlOOH sol, very high loadings (75 wt %) of bismuth oxyhalides were embedded within the thin films and calcined at 500 °C to develop porous alumina composite coatings. Various concentrations of Bi(0) doping were tested for their photocatalytic activity. Seven TrOPs including iopromide (IPRM), iohexol (IHX), iopamidol (IPMD), sulfamethoxazole (SMX), carbamazepine, venlafaxine, and bezafibrate (BZF) were selected for this study based on their occurrence and detection in effluents and surface waters worldwide. In all tests, with the exception of IPRM, 3% Bi(0)-doped BiOCl_0.875Br_0.125 showed highest activity, which can be attributed to its unique, highly organized, and compact morphology besides its well-matched energy band positions. Although IPMD, IHX, IPRM, and SMX are susceptible to photolysis, still the photocatalytic activity significantly augmented the removal of all tested compounds. In addition, analysis of the surface charge excluded electrostatic interactions and confirmed the ion-exchange adsorption mechanism for the high degradation rate of BZF in the presence of bismuth oxyhalides.

Monitoring Molecular Transport across Colloidal Membranes

The controlled shaping and surface functionalization of colloidal particles has provided opportunities for the development of new materials and responsive particles. The possibility of creating hollow particles with semipermeable walls allows modulating molecular transport properties on colloidal length scales. While shapes and sizes can typically be observed by optical means, the underlying chemical and physical properties are often invisible. Here, we present measurements of cross-membrane transport via pulsed field gradient NMR in packings of hollow colloidal particles. The work is conducted using a systematic selection of particle sizes, wall permeabilities, and osmotic pressures and allows tracking organic molecules as well as ions. It is also shown that, while direct transport of molecules can be measured, indirect markers can be obtained for invisible species via the osmotic pressure as well. The cross-membrane transport information is important for applications in nanoconfinement, nanofiltration, nanodelivery, or nanoreactor devices.

Effect of divalent versus monovalent cations on the MS2 retention capacity of amino-functionalized ceramic filters

Ceramic capillary membranes conditioned for virus filtration via functionalization with n-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA) are analyzed with respect to their virus retention capacity when using feed solutions based on monovalent and divalent salts (NaCl, MgCl2). The log reduction value (LRV) by operating in dead-end mode using the model bacteriophage MS2 with a diameter of 25 nm and an IEP of 3.9 is as high as 9.6 when using feeds containing MgCl2. In contrast, a lesser LRV of 6.4 is observed for feed solutions based on NaCl. The TPDA functionalized surface is simulated at the atomistic scale using explicit-solvent molecular dynamics in the presence of either Na+ or Mg2+ ions. Computational prediction of the binding free energy reveals that the Mg2+ ions remain preferentially adsorbed at the surface, whereas Na+ ions form a weakly bound dissolved ionic layer. The charge shielding between surface and amino groups by the adsorbed Mg2+ ions leads to an upright orientation of the TPDA molecules as opposed to a more tilted orientation in the presence of Na+ ions. The resulting better accessibility of the TPDA molecules is very likely responsible for the enhanced virus retention capacity using a feed solution with Mg2+ ions.

Positively charged and flexible SiO2@ZrO2nanofibrous membranes and their application in adsorption and separation

Tiny particles with a negative charge in water can be removed effectively by inorganic positively charged nanofiber membranes due to their physical separation and electrostatic adsorption properties. However, the charged positive and isoelectric points (IEP) on the surface of the positively charged nanofiber membranes need to be further improved to meet the requirements of the Environmental Protection Agency for virus filters (excellent adsorption and separation properties in solutions with pH between 5 and 9). The positively charged SiO₂@ZrO₂ nanofibrous membrane was fabricated by electrospinning combined with the impregnation method and calcined in an anoxic atmosphere. The effects of the impregnating solution concentration and centrifugal speeds on the morphology, pore size and nanofiber diameter of the composite nanofibrous membrane were investigated. The phase composition, the element valence state, the surface charge and the adsorption separation properties of the composite nanofibrous membranes were characterized. Flexible SiO₂@ZrO₂ nanofibrous membranes with high specific surface area and water flux were obtained. The surface isoelectric point is 7.3 when calcined in a mixed atmosphere of N₂ (96%)/H₂ (4%), which is higher than that when calcined in air and vacuum. Some oxygen vacancies were present on the surface of the ZrO_x (0 < x < 2) shell, resulting in the tetragonal zirconia still being available at room temperature. The interception rate of the positively charged SiO₂@ZrO₂ nanofibrous membranes for a titan yellow solution with a concentration of 10 mg L⁻¹ reaches 99.996%. Its maximum adsorption capacity can reach 63.27 mg cm⁻³ when filtering a 1 L titan yellow solution. The resulting nanofibrous membranes have potential application for the separation of bacteria and viruses from water.

Tiny particles with a negative charge in water can be removed effectively by inorganic positively charged nanofiber membranes due to their physical separation and electrostatic adsorption properties.

Effect of Geometry on Electrokinetic Characterization of Solid Surfaces

An analytical approach is presented to describe pressure-driven streaming current (I_str) and streaming potential (U_str) generation in geometrically complex samples, for which the classical Helmholtz-Smoluchowski (H-S) equation is known to be inaccurate. The new approach is valid under the same prerequisite conditions that are used for the development of the H-S equation, that is, the electrical double layers (EDLs) are sufficiently thin and surface conductivity and electroviscous effects are negligible. The analytical methodology is developed using linear velocity profiles to describe liquid flow inside of EDLs and using simplifying approximations to describe macroscopic flow. At first, a general expression is obtained to describe the I_str generated in different cross sections of an arbitrarily shaped sample. Thereafter, assuming that the generated U_str varies only along the pressure-gradient direction, an expression describing the variation of generated U_str along the sample length is obtained. These expressions describing I_str and U_str generation constitute the theoretical foundation of this work, which is first applied to a set of three nonuniform cross-sectional capillaries and thereafter to a square array of cylindrical fibers (model porous media) for both parallel and transverse fiber orientation cases. Although analytical solutions cannot be obtained for real porous substrates because of their random structure, the new theory provides useful insights into the effect of important factors such as fiber orientation, sample porosity, and sample dimensions. The solutions obtained for the model porous media are used to device strategies for more accurate zeta potential determination of porous fiber plugs. The new approach could be thus useful in resolving the long-standing problem of sample geometry dependence of zeta potential measurements.

Water treatment with exceptional virus inactivation using activated carbon modified with silver (Ag) and copper oxide (CuO) nanoparticles

Continuous flow experiments (450 mL min^-1) were performed in household filter in order to investigate the removal and/or inactivation of T4 bacteriophage, using granular activated carbon (GAC) modified with silver and/or copper oxide nanoparticles at different concentrations. GAC and modified GAC were characterized by X-ray diffractometry, specific surface area, pore size and volume, pore average diameter, scanning electron microscopy, transmission electron microscopy, zeta potential and atomic absorption spectroscopy. The antiviral activity of the produced porous media was evaluated by passing suspensions of T4 bacteriophage (∼10⁵ UFP/mL) through filters. The filtered water was analyzed for the presence of the bacteriophage and the release of silver and copper oxide. The porous media containing silver and copper oxide nanoparticles showed high inactivation capacity, even reaching reductions higher than 3 log. GAC6 (GAC/Ag0.5%Cu1.0%) was effective in the bacteriophage inactivation, reaching 5.53 log reduction. The levels of silver and copper released in filtered water were below the recommended limits (100 ppb for silver and 1000 ppb for copper) in drinking water. From this study, it is possible to conclude that activated carbon modified with silver and copper oxide nanoparticles can be used as a filter for virus removal in the treatment of drinking water.

Adsorption and separation properties of positively charged ZrO2nanofibrous membranes fabricated by electrospinning

Positively charged ZrO₂nanofibrous membranes with high interception rate and adsorption capacity to separate and remove negatively charged particles.

Microporous nano-MgO/diatomite ceramic membrane with high positive surface charge for tetracycline removal

A novel microporous nano-MgO/diatomite ceramic membrane with high positive surface charge was prepared, including synthesis of precursor colloid, dip-coating and thermal decomposition. Combined SEM, EDS, XRD and XPS studies show the nano-MgO is irregularly distributed on the membrane surface or pore walls and forms a positively charged nano coating. And the nano-MgO coating is firmly attached to the diatomite membrane via SiO chemical bond. Thus the nano-MgO/diatomite membrane behaves strong electropositivity with the isoelectric point of 10.8. Preliminary filtration tests indicate that the as-prepared nano-MgO/diatomite membrane could remove approximately 99.7% of tetracycline in water through electrostatic adsorption effect. The desirable electrostatic property enables the nano-MgO/diatomite membrane to be a candidate for removal of organic pollutants from water. And it is convinced that there will be a great application prospect of charged ceramic membrane in water treatment field.

Positively charged microporous ceramic membrane for the removal of Titan Yellow through electrostatic adsorption

To develop a depth filter based on the electrostatic adsorption principle, positively charged microporous ceramic membrane was prepared from a diatomaceous earth ceramic membrane. The internal surface of the highly porous ceramic membrane was coated with uniformly distributed electropositive nano-Y2O3 coating. The dye removal performance was evaluated through pressurized filtration tests using Titan Yellow aqueous solution. It showed that positively charged microporous ceramic membrane exhibited a flow rate of 421L/(m(2)·hr) under the trans-membrane pressure of 0.03bar. Moreover it could effectively remove Titan Yellow with feed concentration of 10mg/L between pH3 to 8. The removal rate increased with the enhancement of the surface charge properties with a maximum rejection of 99.6%. This study provides a new and feasible method of removing organic dyes in wastewater. It is convinced that there will be a broad market for the application of charged ceramic membrane in the field of dye removal or recovery from industry wastewater.

DLVO Approximation Methods for Predicting the Attachment of Silver Nanoparticles to Ceramic Membranes

This article examines the influence of three common stabilizing agents (citrate, poly(vinylpyrrolidone) (PVP), and branched poly(ethylenimine) (BPEI)) on the attachment affinity of silver nanoparticles to ceramic water filters. Citrate-stabilized silver nanoparticles were found to have the highest attachment affinity (under conditions in which the surface potential was of opposite sign to the filter). This work demonstrates that the interaction between the electrical double layers plays a critical role in the attachment of nanoparticles to flat surfaces and, in particular, that predictions of double-layer interactions are sensitive to boundary condition assumptions (constant charge vs constant potential). The experimental deposition results can be explained when using different boundary condition assumptions for different stabilizing molecules but not when the same assumption was assumed for all three types of particles. The integration of steric interactions can also explain the experimental deposition results. Particle size was demonstrated to have an effect on the predicted deposition for BPEI-stabilized particles but not for PVP.

Amino-Functionalized Ceramic Capillary Membranes for Controlled Virus Retention

A straightforward chemical functionalization strategy using aminosilanes for high-flux yttria-stabilized zirconia capillary membranes is presented (macroporous, d50 = 144 nm, open porosity =49%, membrane flux ∼150 L/(m(2)hbar)). Three different aminosilanes with one, two or three amino groups per silane molecule, namely 3-aminopropyltriethoxysilane (APTES), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AE-APTES) and N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA), are used to generate the amino-functionalized membranes. With a higher number of amino groups per silane molecule increased loading capacities between 0.44 and 1.01 accessible amino groups/nm(2) membrane are achieved. Streaming potential measurements confirm that the zeta-potential of the membrane surface is converted from negative (non-functionalized) to positive (amino-functionalized). By operation in dead-end filtration mode using the model virus MS2 (diameter = 25 nm, IEP = 3.9) the virus retention capacity of the amino-functionalized membranes is significantly increased and log reduction values (LRVs) of up to 9.6 ± 0.3 (TPDA) are obtained whereas a LRV < 0.3 is provided by the non-functionalized membranes. Long-term dead-end filtration experiments for 1 week reveal a high stability of immobilized aminosilanes (TPDA), being robust against leaching. By iterative backflushing with desorption buffer MS2-loaded membranes are successfully regenerated being reusable for a new filtration cycle. The presented functionalization platform is highly promising for controlled virus retention.

Exploitation of Nanotechnology for the Monitoring of Waterborne Pathogens: State-of-the-Art and Future Research Priorities

Contaminated drinking water is one of the most important environmental contributors to the human disease burden. Monitoring of water for the presence of pathogens is an essential part of ensuring drinking water safety. In order to assess water quality it is essential to have methods available to sample and detect the type, level and viability of pathogens in water which are effective, cheap, quick, sensitive, and where possible high throughput. Nanotechnology has the potential to drastically improve the monitoring of waterborne pathogens when compared to conventional approaches. To date, there have been no reviews that outline the applications of nanotechnology in this area despite increasing exploitation of nanotechnology for this purpose. This review is therefore the first overview of the state-of-the-art in the application of nanotechnology to waterborne pathogen sampling and detection schemes. Research in this field has been centered on the use of engineered nanomaterials. The effectiveness and limitations of nanomaterial-based approaches is outlined. A future outlook of the advances that are likely to emerge in this area, as well as recommendations for areas of further research are provided.

Viral nanoparticles, noble metal decorated viruses and their nanoconjugates

Virus-based nanotechnology has generated interest in a number of applications due to the specificity of virus interaction with inorganic and organic nanoparticles. A well-defined structure of virus due to its multifunctional proteinaceous shell (capsid) surrounding genomic material is a promising approach to obtain nanostructured materials. Viruses hold great promise in assembling and interconnecting novel nanosized components, allowing to develop organized nanoparticle assemblies. Due to their size, monodispersity, and variety of chemical groups available for modification, they make a good scaffold for molecular assembly into nanoscale devices. Virus based nanocomposites are useful as an engineering material for the construction of smart nanoobjects because of their ability to associate into desired structures including a number of morphologies. Viruses exhibit the characteristics of an ideal template for the formation of nanoconjugates with noble metal nanoparticles. These bioinspired systems form monodispersed units that are highly amenable through genetic and chemical modifications. As nanoscale assemblies, viruses have sophisticated yet highly ordered structural features, which, in many cases, have been carefully characterized by modern structural biological methods. Plant viruses are increasingly being used for nanobiotechnology purposes because of their relative structural and chemical stability, ease of production, multifunctionality and lack of toxicity and pathogenicity in animals or humans. The multifunctional viruses interact with nanoparticles and other functional additives to the generation of bioconjugates with different properties – possible antiviral and antibacterial activities.

Transport of Human Adenoviruses in Water Saturated Laboratory Columns

Groundwater may be contaminated with infective human enteric viruses from various wastewater discharges, sanitary landfills, septic tanks, agricultural practices, and artificial groundwater recharge. Coliphages have been widely used as surrogates of enteric viruses, because they share many fundamental properties and features. Although a large number of studies focusing on various factors (i.e. pore water solution chemistry, fluid velocity, moisture content, temperature, and grain size) that affect biocolloid (bacteria, viruses) transport have been published over the past two decades, little attention has been given toward human adenoviruses (hAdVs). The main objective of this study was to evaluate the effect of pore water velocity on hAdV transport in water saturated laboratory-scale columns packed with glass beads. The effects of pore water velocity on virus transport and retention in porous media was examined at three pore water velocities (0.39, 0.75, and 1.22 cm/min). The results indicated that all estimated average mass recovery values for hAdV were lower than those of coliphages, which were previously reported in the literature by others for experiments conducted under similar experimental conditions. However, no obvious relationship between hAdV mass recovery and water velocity could be established from the experimental results. The collision efficiencies were quantified using the classical colloid filtration theory. Average collision efficiency, α, values decreased with decreasing flow rate, Q, and pore water velocity, U, but no significant effect of U on α was observed. Furthermore, the surface properties of viruses and glass beads were used to construct classical DLVO potential energy profiles. The results revealed that the experimental conditions of this study were unfavorable to deposition and that no aggregation between virus particles is expected to occur. A thorough understanding of the key processes governing virus transport is pivotal for public health protection.

Nano-structured surface modification of micro-porous ceramic membrane with positively charged nano-Y2O3coating for organic dyes removal

Through dip-coating and thermal decomposition process, the positively charged ceramic membrane was successfully prepared for negative organic dyes removal.

Rice-husk-templated hierarchical porous TiO(2)/SiO(2) for enhanced bacterial removal

To further enhance the bacterial removal capability, we synthesize a biotemplated hierarchical porous material coupling chemical components and hierarchical microstructure, which is derived from rice husk. The results show that the chemical components and hierarchical microstructure of the prepared material could both be factors in enhancing the bacterial removal capability. On the basis of the experimental results, we propose a hypothetical enhanced bacterial removal mechanism model of the prepared material. Furthermore, we propose a hypothetical method of inferring bacterial physical removal effects of samples by their dye adsorption results. Also, the hypothetical method has been proven to be reasonable by the experimental results. This work provides a new paradigm for bacterial removal and can contribute to the development of new functional materials for enhanced bacterial removal in the future.

Functionalized ceramics for biomedical, biotechnological and environmental applications

Surface functionalization has become of paramount importance and is considered a fundamental tool for the development and design of countless devices and engineered systems for key technological areas in biomedical, biotechnological and environmental applications. In this review, surface functionalization strategies for alumina, zirconia, titania, silica, iron oxide and calcium phosphate are presented and discussed. These materials have become particularly important concerning the aforementioned applications, being not only of great academic, but also of steadily increasing human and commercial, interest. In this review, special emphasis is given to their use as biomaterials, biosensors, biological targets, drug delivery systems, implants, chromatographic supports for biomolecule purification and analysis, and adsorbents for toxic substances and pollutants. The objective of this review is to provide a broad picture of the enormous possibilities offered by surface functionalization and to identify particular challenges regarding surface analysis and characterization.

The role of surface functionalization of colloidal alumina particles on their controlled interactions with viruses

Materials that interact in a controlled manner with viruses attract increasing interest in biotechnology, medicine, and environmental technology. Here, we show that virus-material interactions can be guided by intrinsic material surface chemistries, introduced by tailored surface functionalizations. For this purpose, colloidal alumina particles are surface functionalized with amino, carboxyl, phosphate, chloropropyl, and sulfonate groups in different surface concentrations and characterized in terms of elemental composition, electrokinetic, hydrophobic properties, and morphology. The interaction of the functionalized particles with hepatitis A virus and phages MS2 and PhiX174 is assessed by virus titer reduction after incubation with particles, activity of viruses conjugated to particles, and imaged by electron microscopy. Type and surface density of particle functional groups control the virus titer reduction between 0 and 99.999% (5 log values). For instance, high sulfonate surface concentrations (4.7 groups/nm(2)) inhibit attractive virus-material interactions and lead to complete virus recovery. Low sulfonate surface concentrations (1.2 groups/nm(2)), native alumina, and chloropropyl-functionalized particles induce strong virus-particle adsorption. The virus conformation and capsid amino acid composition further influence the virus-material interaction. Fundamental interrelations between material properties, virus properties, and the complex virus-material interaction are discussed and a versatile pool of surface functionalization strategies controlling virus-material interactions is presented.

Biotemplated hierarchical porous material: the positively charged leaf

Addressing the problem of pathogenic bacteria in human health remains a great challenge. We have prepared MgO, replicated from the leaf template, for efficient bacterial removal. The synthesis method perfectly inherits the advantage of the hierarchical three-level micro-meso-macroporous structure from the leaf template. The final product has the integrated advantages of a positively charged property, hierarchical three-level micro-meso-macroporous microstructure and sterilization property so that it could be named "the positively charged leaf". The positively charged leaf with the microstructure, which is bestowed by Nature, could be utilized in water purification for dye removal and could be extended to pollutant removal, especially of harmful bacteria. The positively charged leaf, as the leaf shield, could be useful in protecting human health. The concept of this work could be applied to the synthesis of different functional metal oxides with hierarchical porous structures, and the products could be utilized in efficient bacterial removal.

Improved virus removal in ceramic depth filters modified with MgO

Ceramic filters, working on the depth filtration principle, are known to improve drinking water quality by removing human pathogenic microorganisms from contaminated water. However, these microfilters show no sufficient barrier for viruses having diameters down to 20 nm. Recently, it was shown that the addition of positively charged materials, for example, iron oxyhydroxide, can improve virus removal by adsorption mechanisms. In this work, we modified a common ceramic filter based on diatomaceous earth by introducing a novel virus adsorbent material, magnesium oxyhydroxide, into the filter matrix. Such filters showed an improved removal of about 4-log in regard to bacteriophages MS2 and PhiX174. This is explained with the electrostatic enhanced adsorption approach that is the favorable adsorption of negatively charged viruses onto positively charged patches in an otherwise negatively charged filter matrix. Furthermore, we provide theoretical evidence applying calculations according to Derjaguin-Landau-Verwey-Overbeek theory to strengthen our experimental results. However, modified filters showed a significant variance in virus removal efficiency over the course of long-term filtration experiments with virus removal increasing with filter operation time (or filter aging). This is explained by transformational changes of MgO in the filter upon contact with water. It also demonstrates that filter history is of great concern when filters working on the adsorption principles are evaluated in regard to their retention performance as their surface characteristics may alter with use.

An effective-charge model for the trapping of impurities of fluids in channels with nanostructured walls

: We present model equations for the trapping and accumulation of particles in a cylindrical channel with nanostructured inner walls when a fluid passes through, carrying a moderate load of impurities. The basic ingredient of the model is the introduction of a phenomenological 'effective-charge density' of the walls, related to the electrical charges exposed in the nanotexture. The effective charge is gradually reduced as the flow runs through the channel and the trapped impurities cover the internal walls. Based on the proposed equations, the position and time dependence of the areal density of trapped impurities, and the filtration performance, may be calculated. It is proposed that experimentally testing these results may help to understand the enhanced trapping capability observed in many diverse nanotextured channel structures.

Virus removal in ceramic depth filters based on diatomaceous earth

Ceramic filter candles, based on the natural material diatomaceous earth, are widely used to purify water at the point-of-use. Although such depth filters are known to improve drinking water quality by removing human pathogenic protozoa and bacteria, their removal regarding viruses has rarely been investigated. These filters have relatively large pore diameters compared to the physical dimension of viruses. However, viruses may be retained by adsorption mechanisms due to intermolecular and surface forces. Here, we use three types of bacteriophages to investigate their removal during filtration and batch experiments conducted at different pH values and ionic strengths. Theoretical models based on DLVO-theory are applied in order to verify experimental results and assess surface forces involved in the adsorptive process. This was done by calculation of interaction energies between the filter surface and the viruses. For two small spherically shaped viruses (MS2 and PhiX174), these filters showed no significant removal. In the case of phage PhiX174, where attractive interactions were expected, due to electrostatic attraction of oppositely charged surfaces, only little adsorption was reported in the presence of divalent ions. Thus, we postulate the existence of an additional repulsive force between PhiX174 and the filter surface. It is hypothesized that such an additional energy barrier originates from either the phage's specific knobs that protrude from the viral capsid, enabling steric interactions, or hydration forces between the two hydrophilic interfaces of virus and filter. However, a larger-sized, tailed bacteriophage of the family Siphoviridae was removed by log 2 to 3, which is explained by postulating hydrophobic interactions.

Impact of solution chemistry on viral removal by a single-walled carbon nanotube filter

This study investigates the effectiveness of a single-walled carbon nanotube (SWNT) filter for removal of viruses from water. MS2 bacteriophage viral removal was examined over a range of environmentally relevant solution chemistries, spanning various ionic strengths, monovalent and divalent salts, pH, and natural organic matter (NOM) concentrations. Viral removal by the SWNT filter was governed by physicochemical (depth) filtration. The removal of viruses increased at higher ionic strengths (NaCl) due to suppression of repulsive electrostatic interactions between viruses and SWNTs. Addition of divalent salts, however, had varying impacts. While CaCl(2) increased virus removal, likely due to complexation of calcium ions to viral surfaces, addition of MgCl(2) reduced viral removal by the SWNT filter. Solution pH also had significant impact on viral removal as the interactions between viral particles and SWNTs changed from attractive below the virus isoelectric point (about pH 3.9) to repulsive at higher pH. Suwannee River NOM was shown to be detrimental to filter viral removal. Reduction of viral removal by NOM was attributed to adsorption of NOM macromolecules to viruses and SWNTs, thereby resulting in steric repulsive forces. Modifications of the filter to incorporate thicker SWNT layers mitigate the negative impacts of NOM on filter performance. This study has shown that while it is possible to attain high levels of viral removal over a broad range of solution chemistries, the extent of viral removal will be highly dependent on the specific solution chemistry of the treated water.

Adsorption of rotavirus and bacteriophage MS2 using glass fiber coated with hematite nanoparticles

Batch and flow-through experiments were conducted to investigate the removal and inactivation of rotavirus (RV) and bacteriophage MS2 using glass fiber coated with hematite nanoparticles. Batch tests showed a high removal of MS2 (2.49x10(11) plaque forming unit/g) and RV (8.9x10(6) focal forming unit/g) at a low concentration of hematite nanoparticles in solution (0.043g/L and 0.26g/L, respectively). Virus adsorption was, however, decreased in the presence of bicarbonate ions and natural organic matter (NOM) in solution, suggesting a great affinity of iron oxide nanoparticles for these competitors. Adsorption on hematite nanoparticles by MS2 and RV was also tested with aquifer groundwater under saturated flow conditions to mimic environmental conditions with promising results (8x10(8) plaque forming unit/g and 3x10(4) focal forming unit/g, respectively). Desorption of up to 63% of infectious MS2 and only 2% of infectious RV from hematite nanoparticles were achieved when an eluant solution containing beef extract and glycine was used. Transmission electron microscopy (TEM) images showed evidence of electrostatic adsorption of apparently intact MS2 and structurally damaged RV particles to hematite nanoparticles. Results from this research suggest that a cartridge made of glass fiber coated with hematite nanoparticles could be used as a point-of-use device for virus removal for drinking water treatment.

Oscillating streaming potential measurement system for macroscopic surfaces

A method and instrumentation is described capable of streaming potential measurements of various macroscopic surfaces. It differs from other approaches due to the creation of an oscillatory flow of electrolyte solutions through or alongside the sample. This technique offers a wide range of applied flow frequency and amplitude resulting in a fast and highly accurate measurement. This enables the streaming potential detection at rather high ionic strength and in a short time regime, which allows the monitoring of adsorption processes. Streaming potential and applied pressure are measured simultaneously, together with the specific conductivity of the bulk solution, pH value, and temperature. Combining these data, the zeta potential (zeta) for many different material types (fibers, films, foils, granules, and particles) can be calculated. The apparatus comprises reliable and robust measurements, simple handling, a high degree of automation, and advanced software control. With this setup, automated pH and concentration dependent zeta-potential measurements are possible for a variety of analytes and adsorbing species (e.g., ionic strength, surfactants, polyelectrolytes, and proteins); time-resolved measurements are facilitated down to the seconds time scale. The device allows the necessary sample preparation and equilibration outside the instrument using exchangeable sample holders. This offers the opportunity of high sample throughput.