Effect of substrate characteristics on microbial community structure, function, resistance, and resilience; application to coupled photocatalytic-biological treatment

Effect and mechanism of simultaneous cadmium-tetracycline removal by a self-assembled microbial-photocatalytic coupling system

Electrochemical bacteria Shewanella oneidensis MR-4 (MR-4) was used to biologically generate cadmium sulfide (bio-CdS) nanocrystals and construct a self-assembled intimately coupled photocatalysis-biodegradation system (SA-ICPB) to remove cadmium (Cd) and tetracycline hydrochloride (TCH) from wastewater. The characterization using EDS, TEM, XRD, XPS, and UV-vis confirmed the successful CdS bio-synthesis and its visible-light response capacity (520 nm). 98.4% of Cd²⁺ (2 mM) was removed during bio-CdS generation within 30 min. The electrochemical analysis confirmed the photoelectric response capability of the bio-CdS as well as its photocatalytic efficiency. Under visible light, SA-ICPB entirely eliminated TCH (30 mg/L). In 2 h, 87.2% and 43.0% of TCH were removed separately with and without oxygen. 55.7% more chemical oxygen demand (COD) was removed with oxygen participation, indicating the degradation intermediates elimination by SA-ICPB required oxygen participation. Biodegradation dominated the process under aerobic circumstances. Electron paramagnetic resonance analysis indicated that h⁺ and ·O₂^- played a decisive role in photocatalytic degradation. Mass spectrometry analysis proved that TCH was dehydrated, dealkylated, and ring-opened before mineralizing. In conclusion, MR-4 can spontaneously generate SA-ICPB and rapidly-deeply eliminate antibiotics by coupling photocatalytic and microbial degradation. Such an approach was efficient for the deep degradation of persistent organic pollutants with antimicrobial properties.

Enhanced antibiotic wastewater degradation by intimately coupled B-Bi3O4Cl photocatalysis and biodegradation reactor: Elucidating degradation principle systematically

Intimately coupled photocatalysis and biodegradation (ICPB) is an emerging technology that has potential applications in the degradation of bio-recalcitrant pollutants. However, the interaction principles between photocatalysts and biofilms in ICPB have not been well developed. This article covers a cooperative degradation scheme coupling photocatalysis and biodegradation for efficient degradation and mineralization of ciprofloxacin (CIP) using ICPB with B-doped Bi₃O₄Cl as the photocatalyst. In consequence, a removal rate of ∼95 % is reached after 40 d. The biofilms inside the ICPB carriers can mineralize the photocatalytic products, thus improving the removal rate of total organic carbon (TOC) by more than 20 %. Interior biofilms are not destroyed by CIP or photocatalysis, and they adapt to ICPB of CIP by enriching in Pseudoxanthomonas, Ferruginibacter, Clostridium, Stenotrophomonas and Comamonas and reconstructing their microbial communities using energy produced by the light-excited photoelectrons. Furthermore, this research gives new opinion into the degradation principles of the ICPB system.

Organic carbon and eukaryotic predation synergistically change resistance and resilience of aquatic microbial communities

With rapid global urbanization, anthropogenic activities alter aquatic biota in urban rivers through inputs of dissolved organic carbon (DOC) and nutrients. Microorganisms-mediated global element cycles provide functions in maintaining microbial ecology stability. The DOC (bottom-up control) and microbial predation (top-down control) may synergistically drive the competition and evolution of aquatic microbial communities, as well as their resistance and resilience, for which experimental evidences remain scarce. In this study, laboratory sediment-water column experiments were employed to mimic the organic carbon-driven water blackening and odorization process in urban rivers and to elucidate the impact of DOC on microbial ecology stability. Results showed that low (25-75 mg/L) and high DOC (100-150 mg/L) changed the aquatic microbial community assemblies in different patterns: (1) the low DOC enriched K-selection microorganisms (e.g., C39, Tolumonas and CR08G) with low biomass and low resilience, as well as high resistance to perturbations in changing microbial community assemblies; (2) the high DOC was associated with r-selection microorganisms (e.g., PSB-M-3 and Clostridium) with high biomass and improved resilience, together with low resistance detrimental to microbial ecology stability. Overall, this study provided new insight into the impact of DOC on aquatic microbial community stability, which may help guide sustainable urban river management.

Insight into integration of photocatalytic and microbial wastewater treatment technologies for recalcitrant organic pollutants: From sequential to simultaneous reactions

The more and more stringent environmental standards for recalcitrant organic pollutants pushed forward the development of integration of photocatalytic and microbial wastewater treatment technologies. The past studies proposed mainly two typical integration ways: a) Independent sequence of photocatalysis and biodegradation (ISPB) conducting the sequential reactions; b) Intimate coupling of photocatalysis and biodegradation (ICPB) conducting the simultaneous reactions. Although ICPB has received more attraction recently due to its novelty, ISPB gives an edge in certain cases. The article reviews the state-of-the-art ISPB and ICPB studies to comprehensively compare the two systems. The strengths and weaknesses of ISPB and ICPB regarding the treatment efficiency, cost, toxicity endurance and flexibility are contradistinguished. The reactor set-ups, photocatalysts, microbial characteristics of ISPB and ICPB are summarized. The applications for different kinds of recalcitrant compounds are elaborated to give a holistic view of the removal efficiencies and transformation pathways by the two technologies. Currently, in-depth understandings about the interference among mixed pollutants, co-existing components and key parameters in realistic wastewater are urgently needed. The long-term and large-scale application cases of the integration technologies are still rare. Overall, we conclude that both ISPB and ICPB technologies are reaching maturity while challenges still exist for two systems especially regarding the reliability, economy and generalization for realistic wastewater treatment plants. Future research should not only manage to reduce the cost and energy consumption by upgrading reactors and developing novel catalysts, but also attach importance to the cocktail effects of wastewater during the sequential or simultaneous photocatalysis and biodegradation.

A two-stage degradation coupling photocatalysis to microalgae enhances the mineralization of enrofloxacin

The coupling of photocatalytic and algal processes has been used for the removal of widespread antibiotics. The removal capacities of the individual and the combined system against enrofloxacin were tested and compared in this work. Due to the low tolerance of the algae to enrofloxacin, the target compound was barely degraded during the individual algal treatment. In the individual photocatalytic process, the mineralization efficiency (defined as the ratio between the produced carbon dioxide and the initial) reached ∼57% with the remaining formed as transformation products. In contrast, a two-stage treatment incorporating photocatalytic and algal processes removed enrofloxacin completely and increased the mineralization efficiency to ∼64% or more. The addition of the citric acid as external co-substrate further elevated the mineralization efficiency with a factor of 1.25 compared to that of the individual photocatalysis. Different degradation products in both individual and integrated processes were identified and compared. The degradation pathways were found to involve the attack of the piperazine moiety and quinolone core. The results indicated the potential application of the combined photocatalytic-algal treatment in removal of veterinary antibiotics and improved our understanding of the underlying mechanisms and pathways.

Propelling the practical application of the intimate coupling of photocatalysis and biodegradation system: System amelioration, environmental influences and analytical strategies

The intimate coupling of photocatalysis and biodegradation (ICPB) possesses an enhanced ability of recalcitrant contaminant removal and energy generation, owing to the compact communication between biotic components and photocatalysts during the system operation. The photocatalysts in the ICPB system could dispose of noxious contaminants to relieve the external pressure on microorganisms which could realize the mineralization of the photocatalytic degradation products. However, due to the complex components in the composite system, the mechanism of the ICPB system has not been completely understood. Moreover, the variable environmental conditions would play a significant role in the ICPB system performance. The further development of the ICPB scheme requires clarification on how to reach an accurate understanding of the system condition during the practical application. This review starts by offering detailed information on the system construction and recent progress in the system components' amelioration. We then describe the potential influences of relevant environmental factors on the system performance, and the analytical strategies applicable for comprehending the critical processes during the system operation are further summarized. Finally, we put forward the research gaps in the current system and envision the system's prospective application. This review provides a valuable reference for future researches that are devoted to assessing the environmental disturbance and exploring the reaction mechanisms during the practical application of the ICPB system.

Could co-substrate sodium acetate simultaneously promote Chlorella to degrade amoxicillin and produce bioresources?

Integrating microalgae culture and wastewater purification is a promising technology for sustainable bioresource production. However, the challenge is that toxins in wastewater usually limit risk elimination and cause poor bioresource production. Easy-to-biodegrade substrates could alleviate the resistant stress on a bacterial community but we know little about how they function with microalgae. In this study, we tested if Easy-to-biodegrade substrates could simultaneously promote Chlorella to degrade antibiotic amoxicillin (AMO) and produce bioresources. Sodium acetate (NaAC) was used as the representative co-substrate. The results showed NaAC could enhance AMO removal by 76%. The β-lactam structure was destroyed and detoxified to small molecules, due to the up-regulation of hydrolase, oxidoreductase, reductase, and transferase. Chlorella biomass production increased by 36%. The genes encoding the glutathione metabolism and peroxisome pathways were significantly up-regulated to alleviate the antibiotic stress, and the DNA replication pathway was activated. As a result, the production of lipid, carbohydrate, and protein was enhanced by 61%, 122%, and 34%, respectively. This study provides new insights for using microalgae to recover bioresources from toxic wastewater and reveals the critical underlying mechanisms.

Intimate coupling of photocatalysis and biodegradation for wastewater treatment: Mechanisms, recent advances and environmental applications

Due to the increase of emerging contaminants in water, how to use new treatment technology to make up for the defects of traditional wastewater treatment method has become one of the research hotspots at present. Intimate coupling of photocatalysis and biodegradation (ICPB) as a novel wastewater treatment method, which combines the advantages of biological treatment and photocatalytic reactions, has shown a great potential as a low-cost, environmental friendly and sustainable treatment technology. The system mainly consists of photocatalytic materials, porous carriers and biofilm. The key principle of ICPB is to transform bio-recalcitrant pollutants into biodegradable products by photocatalysis on the surface of porous carriers. The biodegradable products were mineralized simultaneously through the biofilm inside the carriers. Because of the protection of the carriers, the microorganism can remain active even under the UV-light, the mechanical force of water flow or the attack of free radicals. ICPB breaks the traditional concept that photocatalytic reaction and biodegradation must be separated in different reactors, improves the purification capacity of sewage and saves the cost. This review summarizes the recent advances of ICPB photocatalysts, carriers and biofilm being applied, and focuses on the mechanisms and reactor configurations which is particularly novel. Furthermore, the possible ongoing researches on ICPB are also put forward. This review will provide a valuable insight into the design and application of ICPB in environment and energy field.

Bacterial assembly in the bio-cake of membrane bioreactors: Stochastic vs. deterministic processes

Much about assembly processes dictating bio-cake microbiota remains uncertain, leading to poor understanding of membrane biofouling in membrane bioreactors (MBRs). This work aimed to reveal the underlying mechanisms driving bio-cake community during the biofouling process under different flux conditions. On the basis of 16S rRNA sequences, the results showed that bacterial diversity decreased with increasing fouling. Additionally, low-flux bio-cake (8 LMH) communities harbored much lower diversity than high-flux (16 LMH) bio-cake microbiomes. Ecological null model analyses and phylogenetic molecular ecological networks (pMENs) revealed that environmental filtering deterministically governed low-flux bio-cake communities. In contrast, high-flux bio-cake communities were mainly shaped in a stochastic manner. This is likely due to the higher stochastic deposition of bacterial taxa from bulk sludge because of the presence of a stronger drag force. Moreover, by lowering the flux, the interactions between bacterial lineages were enhanced; this is evidenced by the greater number of links, the higher average degree, and the higher average clustering coefficients within the pMENs in low-flux bio-cakes than those in high-flux bio-cakes. Most keystone fouling-related taxa in low-flux bio-cakes were motile and involved in nitrate reduction and polysaccharide/protein metabolism. This corroborated the important role of environmental filtering in the assembly process dictating low-flux bio-cake formation. Some low-abundance taxa were observed to be key fouling-related bacteria under both flux conditions, indicating that a few populations play paramount ecological roles in triggering biofouling. In summary, our findings clearly indicate distinct bio-cake community assembly patterns under different operational conditions and highlight the importance of developing specialized strategies for fouling control in individual MBR systems.

Degradation of cefradine in alga-containing water environment: a mechanism and kinetic study

Large quantities of antibiotics are manufactured, used, and eventually discharged into alga-containing water environment as prototypes, by-products, or transformation products. Different activities of Chlamydomonas reinhardtii toward cefradine (CFD) were studied, and the results indicated that CFD is resistant (removal rate of 5.45-14.72%) in simulated natural water environment. Cefradine was mainly removed by hydrolysis, adsorption, desorption, photodecarboxylation, and photoisomerization. The effects of C. reinhardtii density, initial solution pH, and different light sources on CFD removal efficiency were investigated. The optimum conditions occurred at a density of algae 10 × 10⁴ cells/mL, a solution pH of 9.0, and the ultraviolet (UV) light. Additionally, the removal kinetics under 16 different conditions was explored. The results showed that the removal of CFD fits well with a pseudo-first-order kinetic, and the half-life times are from 0.8 to 261.6 days. This study summarizes the CFD removal mechanisms in alga-containing water environment, highlights the important role played by light irradiation in eliminating CFD, and obtains the important kinetic data on CFD removal.

Bioelectricity generation using microalgal biomass as electron donor in a bio-anode microbial fuel cell

In this study, microalgal biomass waste (Chlorella regularis) was treated while simultaneously producing bioelectricity in a microbial fuel cell (MFC). Algal biomass was the sole electron donor and was enriched with easily biodegradable proteins (46%) and carbohydrates (22%). The generated power density was 0.86 W/m² and the columbic efficiency reached ∼61.5%.The power generation could be further increased to 1.07 W/m² by using a biomass waste concentration enhancement strategy with maximum chemical oxygen demand (COD) removal of ∼65.2%. Via direct comparison, the power generation and COD removal capability of the algal-fed MFC was close to that of the commercial acetate-fed MFC. The algae-fed MFC presented superior electrochemical characteristics that were attributed to the complicated composition of the biomass anolyte. It possessed a multiple anode respiring bacterial group and diverse microbial community. Hence, this study provides a new strategy for the utilization of microalgal biomass as a bioresource.

Roles of an easily biodegradable co-substrate in enhancing tetracycline treatment in an intimately coupled photocatalytic-biological reactor

Intimately coupled photocatalysis and biodegradation (ICPB) was realized in a macroporous carrier in which a photocatalyst was present on the outer surface, while a biofilm accumulated inside the carrier. In ICPB, photocatalysis products are rapidly biodegraded by a protected biofilm, leading to mineralization of the refractory organics, such as antibiotics. However, mineralization in ICPB could be compromised if the photocatalysis products remain refractory or are inhibitory. To address this, we attempted to increase metabolic activity by providing a readily biodegradable co-substrate (acetate) that could act as a source of energy and electrons to improve biotransformation and mineralization of the refractory antibiotic tetracycline (TCH). When we added acetate during ICPB of TCH, TCH removal increased by ∼5%, mineralization increased by ∼20%, and almost all photocatalysis products disappeared. Acetate addition also led to an increase in active biomass, an increase in the biomass's respiratory activity, and evolution of the microbial community to having more members able to biodegrade photocatalysis and biotransformation intermediates. Thus, providing an easily biodegradable co-substrate was an effective means for enhancing TCH removal and mineralization with the ICPB technology.