Transformation of Methylparaben by aqueous permanganate in the presence of iodide: Kinetics, modeling, and formation of iodinated aromatic products

Simulated sunlight/periodate-triggered formation of toxic halogenated bisphenols in highly saline water

Periodate (PI)-based oxidation using the activators, such as metal ions and light irradiation, has emerged as a feasible treatment strategy for the effective remediation of contaminated water and wastewater. Given the pervasive nature of PI residues and solar exposure during application, the role of solar light in remediating the challenging highly saline water matrices needs to be elucidated. In this study, bisphenol A (BPA) was selected as the targeted micropollutant, which can be efficiently eliminated by the simulated sunlight (SSL)/PI system in the presence of high-level Cl- (up to 846.0 mM) at pH 7.0. The presence of different background constituents of water, such as halides, nitrate, and dissolved organic matter, had no effect, or even accelerated BPA abatement. Particularly, the ubiquitous Br- or I- appreciably enhanced the BPA transformation efficiency, which may be ascribed to the generation of high-selective reactive HOBr or HOI. The in silico predictions suggested that the transformation products generated by halide-mediated SSL/PI systems via halogen substitutions showed greater persistence, bioaccumulation, and aquatic toxicity than BPA itself. These findings highlighted a widespread phenomenon during PI-based oxidative treatment of highly saline water, which needs special attention under solar light illumination.

Degradation of Organic Contaminants by Reactive Iron/Manganese Species: Progress and Challenges

Many iron(II, III, VI)- and manganese(II, IV, VII)-based oxidation processes can generate reactive iron/manganese species (RFeS/RMnS, i.e., Fe(IV)/Fe(V) and Mn(III)/Mn(V)/Mn(VI)), which have mild and selective reactivity toward a wide range of organic contaminants, and thus have drawn significant attention. The reaction mechanisms of these processes are rather complicated due to the simultaneous involvement of multiple radical and/or nonradical species. As a result, the ambiguity in the occurrence of RFeS/RMnS and divergence in the degradation mechanisms of trace organic contaminants in the presence of RFeS/RMnS exist in literature. In order to improve the critical understanding of the RFeS/RMnS-mediated oxidation processes, the detection methods of RFeS/RMnS and their roles in the destruction of trace organic contaminants are reviewed with special attention to some specific problems related to the scavenger and probe selection and experimental results analysis potentially resulting in some questionable conclusions. Moreover, the influence of background constituents, such as organic matter and halides, on oxidation efficiency of RFeS/RMnS-mediated oxidation processes and formation of byproducts are discussed through their comparison with those in free radicals-dominated oxidation processes. Finally, the prospects of the RFeS/RMnS-mediated oxidation processes and the challenges for future applications are presented.

Iodide sources in the aquatic environment and its fate during oxidative water treatment - A critical review

Iodine is a naturally-occurring halogen in natural waters generally present in concentrations between 0.5 and 100 µg L^-1. During oxidative drinking water treatment, iodine-containing disinfection by-products (I-DBPs) can be formed. The formation of I-DBPs was mostly associated to taste and odor issues in the produced tap water but has become a potential health problem more recently due to the generally more toxic character of I-DBPs compared to their chlorinated and brominated analogues. This paper is a systematic and critical review on the reactivity of iodide and on the most common intermediate reactive iodine species HOI. The first step of oxidation of I^- to HOI is rapid for most oxidants (apparent second-order rate constant, k_app > 10³ M^-1s^-1 at pH 7). The reactivity of hypoiodous acid with inorganic and organic compounds appears to be intermediate between chlorine and bromine. The life times of HOI during oxidative treatment determines the extent of the formation of I-DBPs. Based on this assessment, chloramine, chlorine dioxide and permanganate are of the highest concern when treating iodide-containing waters. The conditions for the formation of iodo-organic compounds are also critically reviewed. From an evaluation of I-DBPs in more than 650 drinking waters, it can be concluded that one third show low levels of I-THMs (<1 µg L^-1), and 18% exhibit concentrations > 10 µg L^-1. The most frequently detected I-THM is CHCl₂I followed by CHBrClI. More polar I-DBPs, iodoacetic acid in particular, have been reviewed as well. Finally, the transformation of iodide to iodate, a safe iodine-derived end-product, has been proposed to mitigate the formation of I-DBPs in drinking water processes. For this purpose a pre-oxidation step with either ozone or ferrate(VI) to completely oxidize iodide to iodate is an efficient process. Activated carbon has also been shown to be efficient in reducing I-DBPs during drinking water oxidation.

Permanganate Oxidation of Organic Contaminants and Model Compounds

Permanganate oxidation is an attractive environmental remediation strategy due to its low cost, ease of use, and wide range in reactivity. Here, permanganate reactivity trends are investigated for model organic compounds and organic contaminants. Second-order permanganate reaction rate constants were compiled for 215 compounds from 82 references (journal articles, conference proceedings, master's theses, and dissertations). Additionally, we validated some phenol rate constants and contribute a few additional phenol rate constants. Commonalities between contaminant oxidation products are also discussed, and we tentatively identify several model compound oxidation products. Aromatic rings, alcohols, and ether groups had low reaction rate constants with permanganate. Alkene reaction sites had the highest reaction rate constants, followed by phenols, anilines, and benzylic carbon-hydrogen bonds. Generally, permanganate reactivity follows electrophilic substitution trends at the reaction site where electron donating groups increase the rate of reaction, while electron withdrawing groups decrease the rate of reaction. Solution conditions, specifically, buffer type and concentration, may impact the rate of reaction, which could be due to either an ionic strength effect or the buffer ions acting as ligands. The impact of these solution conditions, unfortunately, precludes the development of a quantitative structure-activity relationship for permanganate reaction rate constants with the currently available data. We note that critical experimental details are often missing in the literature, which posed a challenge when comparing rate constants between studies. Future research directions on permanganate oxidation should seek to improve our understanding of buffer effects and to identify oxidation products for model compounds so that extrapolations can be made to more complex contaminant structures.

Oxidative transformation of emerging organic contaminants by aqueous permanganate: Kinetics, products, toxicity changes, and effects of manganese products

Permanganate (Mn(VII)) has been widely studied for removal of emerging organic contaminants (EOCs) in water treatment and in situ chemical oxidation process. Studies on the reactive intermediate manganese products (e.g., Mn(III) and manganese dioxide (MnO₂)) generated from Mn(VII) reduction by EOCs in recent decades shed new light on Mn(VII) oxidation process. The present work summarizes the latest research findings on Mn(VII) reactions with a wide range of EOCs (including phenols, olefins, and amines) in detailed aspects of reaction kinetics, oxidation products, and toxicity changes, along with special emphasis on the impacts of intermediate manganese products (mainly Mn(III) and MnO₂) in-situ formed. Mn(VII) shows appreciable reactivities towards EOCs with apparent second-order rate constants (k_app) generally decrease in the order of olefins (k_app = 0.3 - 2.1 × 10⁴ M^-1s^-1) > phenols (k_app = 0.03 - 460 M^-1s^-1) > amines (k_app = 3.5 × 10^-3 - 305.3 M^-1s^-1) at neutral pH. Phenolic benzene ring (for phenols), (conjugated) double bond (for olefins), primary amine group and the N-containing heterocyclic ring (for amines) are the most reactive sites towards Mn(VII) oxidation, leading to the formation of products with different structures (e.g., hydroxylated, aldehyde, carbonyl, quinone-like, polymeric, ring-opening, nitroso/nitro and C-N cleavage products). Destruction of functional groups of EOCs (e.g., benzene ring, (conjugated) double bond, and N-containing heterocyclic) by Mn(VII) tends to decrease solution toxicity, while oxidation products with higher toxicity than parent EOCs (e.g., quinone-like products in the case of phenolic EOCs) are sometimes formed. Mn(III) stabilized by model or unknown ligands remarkably accelerates phenolic EOCs oxidation by Mn(VII) under acidic to neutral conditions, while MnO₂ enhances the oxidation efficiency of phenolic and amine EOCs by Mn(VII) at acidic pH. The intermediate manganese products participate in Mn(VII) oxidation process most likely as both oxidants and catalysts with their generation/stability/reactivity affecting by the presence of NOM, ligand, cations, and anions in water matrices. This work presents the state-of-the-art findings on Mn(VII) oxidation of EOCs, especially highlights the significant roles of manganese products, which advances our understanding on Mn(VII) oxidation and its application in future water treatment processes.

Chlorination decreases acute toxicity of iodophenols through the formation of iodate and chlorinated aliphatic disinfection byproducts

Highly toxic iodinated phenolic by-products were frequently detected in the oxidative treatment and disinfection of iodine-containing water. Herein, it was found that three model iodinated phenolic disinfection byproducts (DBPs), 2-iodophenol, 4-iodophenol and 2,4,6-triiodophenol, were reactive with HOCl, and the reaction rate constants (at pH 7.0 and 25℃) were 1.86 ×10², 1.62 ×10² and 7.5 ×10¹ M^-1s^-1, respectively. When HOCl was in excess (HOCl/iodophenol = 40/1, [iodophenol]₀ = 20 μM), acute toxicity of water sample containing iodophenols could be largely eliminated (> 85%), with the conversion of iodophenols into stable and non-toxic iodate (IO₃^-) and iodinated and chlorinated aliphatic DBPs. Besides IO₃^-, seven kinds of aromatic intermediate products including iodophenols, chloroiodophenols, iodoquinones, chloroiodoquinones, chloroquinones, chlorophenols, and coupling products were detected. C-I bond of iodophenols was cleaved in the reaction and the resulted aromatic products were further transformed into chlorinated aliphatic DBPs [trichloromethane (TCM), trichloroacetic acid (TCAA), dichloroacetic acid (DCAA), and chloral hydrate (CH)] (mg/L level) and iodinated trihalomethanes (μg/L level). HOCl was effective for converting iodophenols into IO₃^- and less toxic chlorinated aliphatic DBPs. Considering that chlorine was widely used as disinfectant, transformation and toxicity alteration of emerging DBPs during chlorination/booster chlorination warrant further investigations.

Catalyst-free activation of permanganate under visible light irradiation for sulfamethazine degradation: Experiments and theoretical calculation

In this study, visible light (VL) was adopted for permanganate (PM) activation without additional catalyst, where sulfamethazine (SMT) was selected as the probe compound. Experiment results showed that the VL/PM system can effectively degrade SMT through pseudo-first-order reaction kinetics. Influencing factors including PM dosage, solution pH, humid acid (HA) and coexisting anions (CO₃^2-, SO₄^2-, Cl^- and NO₃^-) which affect SMT photo-degradation were also examined. Pyrophosphate (PP) had an inhibitory effect on SMT degradation due to the complexation of PP with Mn (III). Electron spin resonance (ESR) spectrometry and UV-Vis spectrophotometer proved that VL can activate PM to generate ·O₂^- and Mn (III) reactive species. Furthermore, based on the active site prediction, intermediates identification and Density Functional Theory (DFT) calculation, two main degradation pathways involving SMT molecular rearrangement and cleavage of S-N bond were proposed. Moreover, the energy barriers of the two degradation pathways were also calculated. This study offers a novel approach for aqueous SMT removal and deepens our understanding of the degradation mechanism of SMT through DFT calculation, which hopes to shed light on the future development of VL/PM treatment.

Assessing the effects of elevated ozone on physiology, growth, yield and quality of soybean in the past 40 years: A meta-analysis

Soybean (Glycine max) production is seriously threatened by ground-level ozone (O₃) pollution. The goal of our study is to summarize the impacts of O₃ on physiology, growth, yield, and quality of soybean, as well as root parameters. We performed meta-analysis on the collated 48 peer-reviewed papers published between 1980 and 2019 to quantitatively summarize the response of soybean to elevated O₃ concentrations ([O₃]). Relative to charcoal-filtered air (CF), elevated [O₃] significantly accelerated chlorophyll degradation, enhanced foliar injury, and inhibited growth of soybean, evidenced by great reductions in leaf area (-20.8%), biomass of leaves (-13.8%), shoot (-22.8%), and root (-16.9%). Shoot of soybean was more sensitive to O₃ than root in case of biomass. Chronic ozone exposure of about 75.5 ppb posed pronounced decrease in seed yield of soybean (-28.3%). In addition, root environment in pot contributes to higher reduction in shoot biomass and yield of soybean. Negative linear relationships were observed between yield loss and intensity of O₃ treatment, AOT40. The larger loss in seed yield was significantly associated with higher reduction in shoot biomass and other yield component. This meta-analysis demonstrates the effects of elevated O₃ on soybean were pronounced, suggesting that O₃ pollution is still a soaring threat to the productivity of soybean in regions with high ozone levels.

Role of pyrophosphate on the degradation of sulfamethoxazole by permanganate combined with different reductants: Positive or negative

Activating permanganate with reductants has gained increasing attention recently for efficient organic contaminants abatement via reactive intermediate Mn species. However, few studies have been conducted to explore the role of pyrophosphate (PP), a typical complexing agent for intermediate Mn species, in activated permanganate systems. In this study, taking sulfamethoxazole (SMX) as a probe compound, the influences of PP on SMX degradation by permanganate/thiosulfate and permanganate/hydroxylamine were extensively studied. It was found that both thiosulfate and hydroxylamine were able to activate permanganate for oxidation of SMX in the absence of PP. However, upon the introduction of PP, opposite effects were observed in the two systems where PP further improved the activation of permanganate by thiosulfate but dampened the performance of permanganate/hydroxylamine markedly. For permanganate/hydroxylamine system, MnO₂ was determined to be the only reactive oxidative species accounting for SMX degradation in the absence of PP, and its generation could be completely inhibited by PP. While in permanganate/thiosulfate system, both Mn(V) and MnO₂ were responsible for SMX oxidation, and the introduction of PP could strengthen the oxidative ability of Mn(V). These results could shed some insights on the suitability of applying PP to explore the kinetics and mechanisms of manganese involved redox reactions. PRACTITIONER POINTS: Both Na₂ S₂ O₃ and NH₂ OH·HCl can activate KMnO₄ for SMX removal without PP. MnO₂ is the reactive oxidative species involved in KMnO₄ /NH₂ OH·HCl system. Mn(V) and MnO₂ account for the SMX oxidation by KMnO₄ /Na₂ S₂ O₃ system. PP could inhibit the formation of MnO₂ but enhance the oxidative ability of Mn(V).

Hazardous waste treatment technologies

This is a review of the literature published in 2018 on topics related to hazardous waste management in water, soils, sediments, and air. The review covers treatment technologies applying physical, chemical, and biological principles for contaminated water, soils, sediments, and air. PRACTITIONER POINTS: The management of waters, wastewaters, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) was reviewed according to the technology applied, namely, physical, chemical and biological methods. Physical methods for the management of hazardous wastes including adsorption, coagulation (conventional and electrochemical), sand filtration, electrosorption (or CDI), electrodialysis, electrokinetics, membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, persulfate-based, Fenton and Fenton-like, and potassium permanganate processes for the management of hazardous were reviewed. Biological methods such as aerobic, anaerobic, bioreactor, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed.

Further insights into the combination of permanganate and peroxymonosulfate as an advanced oxidation process for destruction of aqueous organic contaminants

Recent studies have reported a novel advanced oxidation process (AOP) by combining permanganate (KMnO₄) and peroxymonosulfate (PMS) for destruction of organic contaminants (i.e., acid orange 7, trichloroethylene, and benzene), where hydroxyl (^•OH) and sulfate radicals (SO₄^•-) are proposed to be generated from PMS activation by amorphous manganese dioxide (MnO₂) formed in situ from KMnO₄ reduction. In this work, appreciable degradation of p-chlorobenzoic acid (p-CBA) was confirmed in KMnO₄/PMS system, while KMnO₄ or PMS alone showed inert reactivity toward p-CBA. Moreover, it was found that pre-synthesized amorphous MnO₂ showed invalid PMS activation for p-CBA degradation, and pre-addition of inorganic or organic reducing agents to promote the formation of amorphous MnO₂ showed negligible influence on p-CBA degradation as well. In these regards, a tentative mechanism for PMS activation by KMnO₄ rather than its product MnO₂ was proposed, involving the substitution of oxo atoms of KMnO₄ by peroxo groups, subsequent reductive generation of peroxomanganese (VI) complexes, and intramolecular disproportionation of these complexes to generate radicals. Efficient degradation of p-CBA was achieved at acid or basic conditions with a maximum rate occurring at pH 3. The coexisting chloride anions showed suppressive effect on p-CBA degradation for scavenging SO₄^•- and ^•OH, while metal ions accelerated the degradation of p-CBA, possibly due to the cation bridging function between negatively-charged MnO₄^- and HSO₅^-. Hydroxylated intermediates of p-CBA were identified in KMnO₄/PMS system. This work improved the fundamental understanding of a new class of AOPs by combining KMnO₄ and PMS for environmental decontamination.

Application of (LC/)MS/MS precursor ion scan for evaluating the occurrence, formation and control of polar halogenated DBPs in disinfected waters: A review

Water disinfection can result in the unintended formation of halogenated disinfection byproducts (DBPs), which have been the subject of intensive investigation over the past 40 years. Robust methods for evaluating and characterizing the formation of halogenated DBPs are prerequisites for ultimately controlling the formation of DBPs and ensuring quality and safe disinfected water. Only a fraction of the total organic halogen (TOX) formed during disinfection has been chemically identified or even well characterized by the classical (derivatization-)gas chromatography/mass spectrometry (GC/MS) method. Such a method may not be amenable to the detection of polar halogenated DBPs, which constitute a major portion of the TOX that is still unaccounted for. Accordingly, a novel precursor ion scan (PIS) method using (liquid chromatography/) electrospray ionization-triple quadrupole mass spectrometry was developed for the rapid selective detection of all polar halogenated DBPs-no matter whether the DBPs are known or unknown-in water. This article reviews recent literature on the application of the PIS method for evaluating the occurrence, formation and control of polar halogenated DBPs in disinfected waters. The challenges in developing the PIS method were briefly summarized. Application of the powerful method pinpointed >150 previously unknown DBPs and revealed the formation, speciation and transformation of halogenated DBPs in disinfected drinking water, wastewater effluents, and swimming pool water. For the same source water, positive correlations were found between the total ion intensity (TII) levels in the PIS spectra of m/z 35/79/126.9 and the total organic chlorine/bromine/iodine levels in the disinfected water sample, and a disinfected sample with a higher TII level generally showed a higher toxic potency. Accordingly, the TII value can be used as a surrogate to comparatively reflect the water quality and assess the efficiency of a DBP control approach. To achieve a more comprehensive and systematic understanding of the DBP compositions in different waters and thus better control the DBP formation and reduce their overall toxicity, topics for future work were discussed.

Determination of acid dissociation constants and reaction kinetics of dimethylamine-based PPCPs with O3, NaClO, ClO2 and KMnO4

Dimethylamine-based pharmaceutical personal care products (DMA-based PPCPs) are a group of N-nitrosodimethylamine (NDMA) precursors. The acid dissociation constant (pKa) values of four DMA-based PPCPs were determined by potentiometric titration over the pH range of 3-11. The pKa values of ranitidine, nizatidine, doxylamine and carbinoxamine corresponding to the DMA moiety were 8.4, 6.8, 9.4 and 9.1, respectively. Competition reaction kinetics and pseudo-first-order reaction kinetics were used to determine the reaction rate constant (k) of the DMA-based PPCPs with O₃, NaClO, ClO₂ and KMnO₄. Comparing the degradation rate constants of the four DMA-based PPCPs, the results of ClO₂ oxidation were close, and for the other three oxidants, the order was k_ranitidine ≈ k_nizatidine > k_doxylamine ≈ k_{carbinoxamine}. Comparing the reaction rate of the four oxidants, for ranitidine and nizatidine, the order was k_NaClO > k_O3 > k_KMnO4 > k_ClO2, and for doxylamine and carbinoxamine, the order was k_O3 > k_NaClO > k_ClO2 > k_KMnO4.

Transformation of bisphenol AF and bisphenol S by permanganate in the absence/presence of iodide: Kinetics and products

Recent studies have reported that permanganate (Mn(VII)) shows a good performance in treatment of phenolic compounds, and the presence of iodide (I^-) may display a great impact on Mn(VII) oxidation with the formation of toxic iodinated aromatic products. In this work, transformation of bisphenol AF (BPAF) and bisphenol S (BPS) by Mn(VII) in the absence or presence of I^- was studied. Mn(VII) showed considerable reactivity towards BPAF with apparent second-order rate constants (0.09-1.65 M^-1s^-1) higher than those of Mn(VII) with BPS (0.02-0.12 M^-1s^-1) reported in literature over the pH range of 5-9. The presence of I^- apparently accelerated the transformation rates of BPAF and BPS by Mn(VII), and these results could be explained by the contribution of hypoiodous acid (HOI) in situ formed from Mn(VII) oxidation of I^-. A kinetic model involving the competitive reactions (i.e., Mn(VII) with I^- and bisphenols, HOI with Mn(VII) and bisphenols) well simulated BPAF/BPS transformation by Mn(VII) in the presence of I^- under various conditions. Hydroxylated, bond-cleavage, and polymeric products were identified from BPAF/BPS oxidation by Mn(VII), and iodinated aromatic products (e.g., mono- and multi-iodinated BPAF/BPS) were additionally detected in the presence of I^-. Reaction pathways involving Mn(VII) one-electron oxidation as well as HOI substitution of BPAF/BPS were proposed. Eco-toxicity analysis by ECOSAR showed that the toxicity of these products generally followed the order of polymeric and iodinated aromatic products > parent BPAF/BPS > hydroxylated products > bond-cleavage products.

Transformation of bisphenol AF and bisphenol S by manganese dioxide and effect of iodide

In this work, transformation of bisphenol A (BPA) alternatives bisphenol AF (BPAF) and bisphenol S (BPS) by manganese dioxide (MnO₂) and the effect of iodide (I^-) during these processes were investigated in comparison with BPA for the first time. These three bisphenols showed appreciable reactivity towards MnO₂ with the half-lives of their loss following the order of BPA < BPAF < BPS under similar conditions, and a higher transformation efficiency was generally obtained at a lower pH. The presence of I^- apparently accelerated the transformation of BPAF and BPS by MnO₂ at pH ≤ 7 but negligibly affected BPA transformation over the pH range of 5-9. This discrepancy could be well explained by the relative contribution of hypoiodous acid (HOI) in situ formed from I^- oxidation by MnO₂. Polymers, hydroxylated derivatives, and bond-cleavage products were detected from BPAF and BPS treated by MnO₂, where a series of reactions of BPAF/BPS radicals formed from one-electron oxidation of BPAF/BPS were likely involved, similar to the case of BPA reported in literature. A group of iodinated aromatic products were additionally identified from BPAF/BPS treated by MnO₂ in the presence of I^- (e.g., iodinated BPAF/BPS and iodinated BPAF/BPS dimers), and they could be further transformed. This study suggests that naturally occurring manganese oxides play a significant role in the attenuation of bisphenols released into the environment and the presence of I^- can display a great effect on their transformation.