Catalytic ozonation of emerging pollutant and reduction of toxic by-products in secondary effluent matrix and effluent organic matter reaction activity

Favipiravir biotransformation by a side-stream partial nitritation sludge: Transformation mechanisms, pathways and toxicity evaluation

Information on biotransformation of antivirals in the side-stream partial nitritation (PN) process was limited. In this study, a side-stream PN sludge was adopted to investigate favipiravir biotransformation under controlled ammonium and pH levels. Results showed that free nitrous acid (FNA) was an important factor that inhibited ammonia oxidation and the cometabolic biodegradation of favipiravir induced by ammonia oxidizing bacteria (AOB). The removal efficiency of favipiravir reached 12.6% and 35.0% within 6 days at the average FNA concentrations of 0.07 and 0.02 mg-N L-1, respectively. AOB-induced cometabolism was the sole contributing mechanism to favipiravir removal, excluding AOB-induced metabolism and heterotrophic bacteria-induced biodegradation. The growth of Escherichia coli was inhibited by favipiravir, while the AOB-induced cometabolism facilitated the alleviation of the antimicrobial activities with the formed transformation products. The biotransformation pathways were proposed based on the roughly identified structures of transformation products, which mainly involved hydroxylation, nitration, dehydrogenation and covalent bond breaking under enzymatic conditions. The findings would provide insights on enriching AOB abundance and enhancing AOB-induced cometabolism under FNA stress when targeting higher removal of antivirals during the side-stream wastewater treatment processes.

Degradation characteristics of refractory organic matter in naproxen pharmaceutical secondary effluent using vacuum ultraviolet-ozone treatment

Vacuum ultraviolet-ozone (VUV-O3) treatment was found to be superior to ultraviolet-ozone (UV-O3) treatment in terms of ozone utilization and hydroxyl radicals (·OH) generation when used to treat the secondary effluent (SE) from a naproxen pharmaceutical plant. VUV-O3 treatment was beneficial in terms of decolorization (100%), chemical oxygen demand removal (43.29%), and total organic carbon removal (54.81%). The VUV-O3 process was applicable over a wide pH range, and the presence of various anions had no significant influence on the oxidation efficiency. After treatment, the genotoxicity, unsaturation degree, and polarity of the SE decreased. In addition, the oxidation sensitivities of the fluorescent organic compounds were ranked as follows: humic acid-like > tyrosine-like > fulvic acid-like > tryptophan-like Moreover, the VUV-O3 process effectively converted refractory organic matter (molecular weights, MW > 2000 Da) into short-chain molecules with low MWs. The removal efficiency of dissolved organic matter (DOM) was 63.27%, and 77.27% of the DOM was found to be reactive to VUV-O3 oxidation. The unsaturation, polarity, and compositional complexity of the DOM decreased after VUV-O3 treatment. Finally, it was deduced that the direct O3 oxidation,·OH, O2·- and 1O2 played a role in the VUV-O3 oxidation process.

Inhibition of bromate formation in plasmon-enhanced catalytic ozonation over silver-doped spinel ferrite

High energy consumption and formation of harmful byproducts are two challenges faced by advanced oxidation processes (AOPs). While much research efforts have been devoted to improving the treatment efficiency, byproduct formation and control calls for more attention. In this study, the underlying mechanism of bromate formation inhibition during a novel plasmon-enhanced catalytic ozonation process with silver-doped spinel ferrite (0.5wt%Ag/MnFe2O4) as the catalysts was investigated. By scrutinizing the effects of each factor (i.e. irradiation, catalyst, ozone) as well as the combinations of different factors on major Br species involved in bromate formation, examining the distribution of Br species, and probing the reactive oxygen species partaking in the reactions, it was found that accelerated ozone decomposition which inhibited two main bromate formation pathways and surface reduction of Br species (e.g. HOBr/OBr- and BrO3-) contributed to the inhibition of bromate formation, both of which can be enhanced by the plasmonic effects of Ag and the good affinity between Ag and Br. A kinetic model was developed by simultaneously solving 95 reactions to predict the aqueous concentrations of Br species during different ozonation processes. The good agreement between the model prediction and experimental data further corroborated the hypothesized reaction mechanism.

Insights into organic matter evolution during food waste stabilization induced by 14-hour high-temperature fermentation

Large amounts of secondary pollutants are released during traditional composting, and rapid fermentation is desirable for the stabilization of food wastes. Food wastes were mixed with rice husk, placed in a bioreactor, and stirred continuously to achieve high-temperature fermentation for 14 h. The transformations of the mixtures were analyzed using elemental and spectral analysis combined with kinetic equations and two-dimensional correlation spectroscopy. The carbohydrates, proteins, and aliphatic compounds of food waste were degraded after 4 h of fermentation. Transformations of dissolved organic and sulfur- and nitrogen-containing substances followed first-order kinetic equations with reaction rate constants of 0.142 h^-1, 0.098 h^-1, and 0.016 h^-1, respectively. Organic matter conversion was in the following order: aliphatic → protein → carbohydrate and followed the order, acrylamide C → O-alkyl C → anomeric C at the molecular level. The fermentation process was characterized by the increase in protein- and fulvic-like compounds. Fulvic acid substances gradually accumulated during the late fermentation period. Thus, dissolved organic matter components were gradually transformed into humic substances with increasing fermentation time. The sequence of transformation during the fermentation process was, tyrosine-like → tryptophan-like → fulvic-like substances. Humification mainly occurred in the mature stage of composting; therefore, it was verified that the food waste was stabilized by a 14-h fermentation.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Effect of extrusion-spheronization granulation and manganese loading on catalytic ozonation of petrochemical wastewater

The petrochemical secondary effluent (PSE) is typical refractory wastewater derived from the petrochemical industries, which requires advanced treatment due to the strict environmental protection policies. Catalytic ozonation is one of the most widely used advanced oxidation technologies in wastewater treatment because of its high mineralization rate, in which the alumina-based catalyst usually plays an important role. Extrusion-spheronization is a promising technique for the preparation of alumina spheres because the synthesized alumina particles have high sphericity, high specific surface aera and narrow particle size distribution. In this paper, two kinds of alumina-based catalysts (catalyst A: manganese nitrate added after alumina granulation and catalyst B: manganese nitrate added into alumina powder before granulation) were prepared by the extrusion-spheronization method and used for PSE treatment by catalytic ozonation. The prepared alumina samples were characterized by Brunauer-Emmett-Teller (BET) method, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM), while the wastewater samples were analyzed for Total organic carbon (TOC), UV₂₅₄ and fluorescence spectroscopy. Results showed that manganese was uniformly distributed in both catalysts, and the specific surface area of two catalysts was 318.36 m²/g and 354.95 m²/g, respectively. Catalytic ozonation experiments were repeated nine times with each catalyst under the same conditions. The TOC removal rates for catalysts A and B in the first run were 48.88% and 49.06%, respectively, then it dropped to 28.05% for catalyst A but remained 47.81% for catalyst B after using for nine times. This implied that the long-term performance of catalyst B would be more stable than catalyst A. Similar result were found in three-dimensional fluorescence analysis. UV₂₅₄ results indicated that the removal efficiency of aromatic and unsaturated substances by catalyst B was higher than catalyst A. A possible explanation is that the active component manganese oxide formed a catalyst skeleton in catalyst B, which makes it hard to dissolve. Effect of extrusion-spheronization granulation and manganese loading on advanced oxidant treatment of petrochemical wastewater.

Sunlit photocatalytic degradation of organic pollutant by NiCr2O4/Bi2S3/Cr2S3 tracheid skeleton nanocomposite: Mechanism, pathway, reactive sites, genotoxicity and byproduct toxicity evaluation

In this study, 3D C₂S₃ (CS) and 2D Bi₂S₃ (BS) modified NiCr₂O₄ nanocomposite (NCO-BS-CS NCs) was prepared by sonochemical assisted co-precipitation method for the enhanced photocatalytic activity. Here, NCO-BS-CS NCs showed band gap energy of 2.23 eV and the PL intensity of NCO-BS-CS NCs was lower than NCO, BS, and CS NPs. Thus, the results indicate the fabricated NCO-BS-CS NCs enhance the charge segregation and lower in recombination rate. NCO-BS-CS NCs showed enhanced photodegradation of methyl orange (MO) (95%) and congo red (CR) (99.7%) respectively. The total organic compound (TOC) analysis shows the complete mineralization of about 91 and 98% for MO and CR respectively. Furthermore, the Fukui function was used for the prediction of reactive sites in the photodegradation pathway of MO and CR by NCs. ECOSAR program was done to determine the toxicity of the intermediate and the results conclude that the degraded product shows nontoxic to the environmental organism (fish, daphnia, and algae). Thus, the fabricated NCO-BS-CS NCs can be used for the remediation of toxic organic pollutants from the waste water by photocatalytic degradation.

Challenges and pitfalls in the investigation of the catalytic ozonation mechanism: A critical review

Catalytic ozonation is a promising technology for pollutant abatement in water and wastewater treatment. However, there are many controversies and contradictions regarding the mechanisms of catalytic ozonation in literature, which has seriously confounded the development of the technology towards industrial applications. Herein, a critical review of literature is conducted to reveal possible underlying causes of the controversies and contradictions, and several common pitfalls in the experimental design and data interpretation are identified, e.g., the fundamentally flawed quenching method popularly used for evaluating the role of reactive oxygen species for pollutant abatement in catalytic ozonation and the neglect of monitoring ozone transfer doses in lab-scale experiments. Based on the identified pitfalls, several measures are suggested to improve the experimental design and data interpretation of catalytic ozonation studies. In addition, recent advances in mechanistic understanding of catalytic ozonation by principle-based modelling approaches are described. Finally, additional works that are needed to shrink the gap between academic research and practical applications and the prospect of catalytic ozonation in future water and wastewater treatment systems are analyzed.

Efficient Oxidation of Paracetamol Triggered by Molecular-oxygen Activation at β-cyclodextrin Modified Titanate Nanotube

Titanate nanotube (TNT) was coated with the cyclic oligosaccharides (carboxymethyl-β-cyclodextrin, CM-β-CD) to obtain a photocatalyst (CM-β-CD-TNT) for efficiently activating molecular oxygen and removing the target contaminant. The hydrophobic cavity and the large specific surface area of the photocatalyst provide abundant active sites for activating molecular oxygen. The free radical capture experiment and quenching experiment showed that cyclodextrin could facilitate adsorption and activation of molecular oxygen to produce O2·-. Therefore, compared with the pristine TNT, CM-β-CD-TNT accelerated the oxidation efficiency of paracetamol (APAP) by 3.4 times. Moreover, the ring cleavage reaction induced by CM-β-CD-TNT effectively reduced the acute toxicity of wastewater containing APAP. Furthermore, 100% of bisphenol A (BPA), bisphenol S (BPS), phenol, 2,4-dichlorophen (2,4-DCP), and carbamazepine (CBZ) were degraded by CM-β-CD-TNT after 2.5 h Ultraviolet (UV) light irradiation. This strategy provides a new dimension for the advanced treatment of organic wastewater by organic macrocyclic molecules modified materials.

Self-assembling of 3D layered flower architecture of BiOI modified MgCr2O4 nanosphere for wider spectrum visible-light photocatalytic degradation of rhodamine B and malachite green: Mechanism, pathway, reactive sites and toxicity prediction

In this study, 3D BiOI nanoparticle (BOI NPs) modified MgCr₂O₄ nanoparticle (MCO NPs) was fabricated by simple sonochemical and coprecipitation method for the enhanced photocatalytic activity. The morphological structure of the MgCr₂O₄-BiOI nanocomposite (MCO-BOI NCs) was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), electron impedance spectroscopy (EIS) and photo luminescence (PL). The lower in the PL intensity and small arc in EIS for NCs shows the effective charge separation and lower in rate of recombination of charge carriers in NCs than the pure MCO and BOI NPs. The degradation efficiency of Rhodamine B (RhB) and malachite green (MG) by MCO-BOI NCs was found to be 99.5% and 98.2% receptivity. In addition, the photocatalytic degradation of RhB and MG was studied under various environmental parameters (different pH, varying the concentration of NCs and dyes) and response surface (RSM) plot was performed. The complete mineralization of RhB and MG by MCO-BOI NCs was determined by TOC. In addition, the photocatalytic degradation pathway was elucidated based on GC-MS results and Fukui function. In addition, the toxicity of intermediate formed during the degradation of RhB and MG was predicted by ECOSAR. The present work highlights the application of MCO-BOI NCs in environmental remediation for toxic pollutant removal.

Influence of sludge organic matter on elimination of polycyclic aromatic hydrocarbons (PAHs) from waste activated sludge by ozonation: Controversy over aromatic compounds

Ozonation has been widely used as a viable advanced oxidation process (AOP) for elimination of PAHs in waste activated sludge through effective sludge disintegration and abatement of organic pollutants. However, sludge organic matter (SOM) influences PAHs degradation during ozone treatment is still rarely understood. In this study, we investigated such an influence with the aid of solid-state ¹³C nuclear magnetic resonance (NMR) spectroscopy and the corresponding two-dimensional correlation analysis (2D-COS) strategy. The results showed that the degradation of SOM macromolecules in the order of aromatic substances > aliphatic carbon > α carbon > amides groups > O-alkyl upon ozone treatment. Moreover, the PAHs removal efficiency was positively correlated with the aromaticity of sludge (R² = 0.84-0.98), while negative associated with its aliphaticity (R² = 0.81-0.95). Lastly, humic acid (HA) was used as a proxy of aromatic SOM to further explore their interaction with PAHs in sludge matrix. The results revealed that freely dissolved (HA-D) and suspended particulates (HA-S) imposed distinctively different influence on ozone-based PAHs degradation. The HA-S facilitated the elimination of PAHs by 7.95 ± 0.11%, while those HA-D reduced the removal efficiency by 16.70 ± 0.13%.

Occurrence and risk assessment of volatile halogenated disinfection by-products in an urban river supplied by reclaimed wastewater

The reuse of the sewage is an effective way to solve the shortage of water resources, but disinfection by-products (DBPs) caused by chlorination may bring potential ecological and health risks to the supplied water. In this study, the occurrence and potential ecological risk of DBPs in SH River in Beijing were evaluated. Four kinds of DBPs were detected in 84 samples by GC-MS, including THM, CH, CTC and TCAN, whose detection rates were 100%, 100%, 100% and 2.38%, respectively. Combining with the relevant standard limitation and corresponding threshold values in China, and the reported concentration in domestic and foreign literatures, the results showed that the number of samples which [THM], [CTC] and [CH] exceeded the threshold values in relevant standard for 23.81%, 100.00% and 89.29%, respectively. CTC showed the highest excess times than the threshold value with [CTC]_max was 356.46 μg/L. In addition, the temporal and spatial characteristics of identified DBPs were studied. [THM], [CTC] and [CH] all exhibited the highest concentration in Aug., which was as the same as the variation trend of air and water temperature. With the increase of sampling distance, [THM] and [CTC] fluctuated greatly, and the background values in SH River were higher due to the supplement of the reclaimed water. [CH] and [TCAN] gradually decreased, which may be due to that they were more prone to volatilize in the channel and be degraded by aquatic microorganisms. In addition, the occurrence situation in S2 and S7, were in the order of CTC > CH > THM. Hence, the rank of the occurrence situation of identified DBPs was CTC > CH > THM > TCAN. Multivariate analysis showed that THM was significantly positively correlated with CTC and their sources were similar. Moreover, they were all affected by solution pH and DO. Potential ecological risk assessment indicated that the rank of identified DBPs ecological risk was CTC > THM > CH > TCAN. Among them, the risk level of CTC and THM were high in both daily and extreme situations. Therefore, the potential ecological risk caused by DBPs should be fully considered in the process of reclaimed water supplying landscape water, such as urban river. If a higher level of the ecological risk management is needed, THM, CTC and CH, especially CTC, should be considered firstly.

Peracetic acid-based advanced oxidation processes for decontamination and disinfection of water: A review

Peracetic acid (PAA) has attracted growing attention as an alternative oxidant and disinfectant in wastewater treatment due to the increased demand to reduce chlorine usage and control disinfection byproducts (DBPs). These applications have stimulated new investigations on PAA-based advanced oxidation processes (AOPs), which can enhance water disinfection and remove micropollutants. The purpose of this review is to conduct a comprehensive analysis of scientific information and experimental data reported in recent years on the applications of PAA-based AOPs for the removal of chemical and microbiological micropollutants from water and wastewater. Various methods of PAA activation, including the supply of external energy and metal/metal-free catalysts, as well as their activation mechanisms are discussed. Then, a review on the usage of PAA-based AOPs for contaminant degradation is given. The degradation mechanisms of organic compounds and the influence of the controlling parameters of PAA-based treatment systems are summarized and discussed. Concurrently, the application of PAA-based AOPs for water disinfection and the related mechanisms of microorganism inactivation are also reviewed. Since combining UV light with PAA is the most commonly investigated PAA-based AOP for simultaneous pathogen inactivation and micropollutant oxidation, we have also focused on PAA microbial inactivation kinetics, together with the effects of key experimental parameters on the process. Moreover, we have discussed the advantages and disadvantages of UV/PAA as an AOP against the well-known and established UV/H₂O₂. Finally, the knowledge gaps, challenges, and new opportunities for research in this field are discussed. This critical review will facilitate an in-depth understanding of the PAA-based AOPs for water and wastewater treatment and provide useful perspectives for future research and development for PAA-based technologies.

Formation of emerging iodinated disinfection by-products during ballast water treatment based on ozonation processes

Disinfection by-products (DBPs) generated by ballast water treatment pose a potential threat to marine environment which aroused widespread concern. In recent years, emerging iodinated DBPs have attracted widespread attention because of their stronger cytotoxicity and genotoxicity than brominated/chlorinated DBPs. In this study, the effects of different natural organic matter species, total residual oxidant (TRO) concentrations, storage time, temperature, pH, bromide and iodide concentrations on the generation of iodinated trihalomethanes (I-THMs) during ozonation process of ballast water were investigated. The results showed that bromochloroiodomethane and diiodochloromethane (DICM) were not detected under all conditions during ozonation of humaic acid (HA). Different kinds of precursors had a significantly effect on the formation of I-THMs. For algal cells as precursor, DICM were detected (1.22 μg/L), while DICM were not detected from oxidation of 1,3-etonedicarboxylic acid, fulvic acid (FA), phenol, resorcinol, hydroquinone and HA as precursors. The yields of I-THMs from oxidation of algal cells, FA and phenol were higher than other precursors. Linear relationships were observed between the formation of I-THMs and TRO concentrations. The yields of I-THMs reached a peak at 48 h (180 μg/L) after ozonation treatment of ballast water, and then decreased with storage time extension. An increase in temperature enhanced the formation of dibromoiodomethane and bromodiiodomethane, while wakened the formation of iodoform and dichloroiodomethane. The formation of I-THMs was complicatedly affected by different pH values in the range from 4 to 9. The more bromide concentrations, the more brominated I-THMs were formed. The concentrations of I-THMs increased with increasing iodide concentrations, and low concentrations of iodide had greater effect on the production of I-THMs than high concentrations of iodide.

Oxygen reduction reaction electrocatalysis inducing Fenton-like processes with enhanced electrocatalytic performance based on mesoporous ZnO/CuO cathodes: Treatment of organic wastewater and catalytic principle

To treat typical organic wastewater efficiently, a novel Fenton-like processes based on ZnO/CuO composite cathode induced by oxygen reduction reaction (ORR) electrocatalysis with enhanced electrocatalytic performance was established successfully. Electrochemical testing investigation indicated that the ZnO/CuO cathode possessed conspicuous redox peak and better conductivity than uncompounded electrodes. Additionally, the removal efficiency of methylene blue and its chemical oxygen demand (COD) reached 96.4% and 70.8% after 120 min, respectively. Next, the feasibility of the material in practical application was also discussed. Subsequently, electrocatalytic principle based on valence state changes of metal elements on the electrode surface were also studied by x-ray photoelectron spectroscopy (XPS). Redox reactions between the active species H₂O₂ and the species Cu⁺ promoting Fenton-like processes were deduced. Namely, the conversion of Cu(I) and Cu(II) on the electrode surface was accompanied by OH generation. The combination of ZnO and CuO improved the surface morphology, increasing the active site of ORR and the yield of H₂O₂, thus greatly enhanced the Fenton-like activity. Finally, the main intermediates were identified by Gas chromatography-mass spectrometer (GC-MS), and possible pathways for dye degradation were proposed. In short, the research of ZnO/CuO cathode provided great significance for heterogeneous Fenton-like degradation and also showed its application potential in water treatment and remediation.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.

An integrated process for the advanced treatment of hypersaline petrochemical wastewater: A pilot study

An integrated process combining ozonation, ceramic membrane filtration with biological activated carbon filtration (O₃+CMF + BAC process) was designed and evaluated using a pilot scale (10 m³/d) test for the advanced treatment of hypersaline petrochemical wastewater in a coastal wastewater plant. The membrane flux and ozone dosage were optimized for the optimal treatment performance of this integrated process. The results showed that this integrated process performed well in pollutant removal. The concentrations of COD_Cr, phosphate and color in the effluents were 17.9 mg/L, 0.25 mg/L, and 5 dilution times in average, respectively. The effluent quality met the local discharge standard even under a high influent COD concentration (195 mg/L in average). The synergistic effect of the ozonation and ceramic membrane filtration was investigated through the fluorescence characteristics and hydrophobic/hydrophilic properties of organic compounds. It revealed that ozonation mitigated the membrane fouling and the nanopores in the ceramic membranes enhanced the ozonation efficiency. Meanwhile, the Fenton process had a slightly better effluent quality than the integrated process, but Fenton process consumed much more chemicals and required the sludge disposal, resulting in higher cost. The estimated unit cost for this integrated process was only 34% of that for the Fenton process. Overall, the integrated process demonstrated high stability, reliable effluents and low cost, providing a promising and cost-efficient technology for the treatment of hypersaline petrochemical wastewater.

Use of spectroscopic indicators for the monitoring of bromate generation in ozonated wastewater containing variable concentrations of bromide

Time-resolved monitoring of bromate and other by-products formed into effluents treated with ozone or advanced oxidation processes in wastewater treatment plants (WWTPs) is time-consuming and expensive. This study examined whether concentrations of bromate formed in wastewater after ozonation in the presence of widely varying bromide levels (from ca. 0.7-21.2 mg/L) can be quantified based on measurements of changes in optical properties (differential UV absorbance (ΔUVA), spectral slopes, total or regional fluorescence) of the ozonated samples. Batch ozonation was carried out using a secondary effluent produced at a major wastewater treatment plant located in the Metropolitan Seattle Area. The tests involved raw and bromide-spiked samples treated with ozone doses from 0.1 to 1 mg O₃/mg DOC. Measurements of the absorbance at 254 nm (UVA254), fluorescence and bromate concentrations were performed on the treated samples. In the ozonated wastewater the concentration of bromate increased approximately linearly, from <10 ppb to ca. 200 ppb, without showing the lag phase characteristic for lower ozone doses (<0.4 mg O₃/mg DOC) that was observed in previous studies carried out with concentrations of bromide in the range of 0.05-0.5 mg/L. The highest bromide concentrations used in this study (>10 mg/L) tended to inhibit the generation of bromate. Relative reduction of UVA254 and total fluorescence (TF) were found to be good predictors of bromate generation. Specifically, exponential curves could adequately fit the non-linear relationships found to exist between the concentrations of bromate and the relative reductions of the UV254 and TF, for any initial bromide concentrations used in this study. Little formation of bromate was found to occur for reduction ranges for UVA254 and TF of 30-40% and 70-80% respectively. Conversely, rapid increases in bromate generation were observed when the decrease of UVA254 or TF exceeded these threshold values.

Bioavailability of dissolved organic matter in biogas slurry enhanced by catalytic ozonation combined with membrane separation

Large molecular weight pig biogas slurry (L-PBS) and small molecular weight pig biogas slurry (S-PBS) were separated from original pig biogas slurry (O-PBS) using a 100 kDa membrane. The original bioavailability and biosafety of L-PBS was very low. In order to enhance the total bioavailable dissolved organic nitrogen (TB-DON) and total bioavailable dissolved organic phosphorus (TB-DOP), optimum catalytic ozonation of L-PBS conditions were determined using Box-behnken design models (P < 0.0001) and intersection tests. The optimal values for ozone concentration, pH value, active catalyst concentration and reaction time were 2.63 mg·L^-1, 6.48, 1.43 g·L^-1 and 40 min, respectively. Catalytic ozonation can effectively decompose and transform 68.07% of L-PBS into S-PBS to improve content organic bioavailability, with a molecular weight distribution of 0-1 kDa (13.53%), 1-5 kDa (16.62%), 5-10 kDa (11.16%), 10-30 kDa (11.73%), 30-100 kDa (15.04%). Catalytic ozonation of L-PBS can reduce protein levels from 85.28% to 47.18%, but increases the proportion of fulvic and humic components from 10.22% to 32.67% and 4.51%-20.15%, respectively. Because catalytic ozonation changes the internal components and molecular weights of L-PBS, both saw increases in TB-DON and TB-DOP from 3.33% to 41.12% and 2.43%-37.88%, respectively, with a large number of TB-DON and TB-DOP derived from hydrophilic organic components during catalytic ozonation. These important internal mechanisms changed by catalytic ozonation can effectively reduce the ecotoxicity (IR, from 76.5% to 33.1%) and phytotoxicity (GI, enhanced from 35.4% to 70.3%) of L-PBS. Therefore, catalytic ozonation combined with membrane separation is a choice technology in improving the nutrition of biogas slurry and reduce its ecological risk.