The photocatalytic reduction of NO3- to N2 with ilmenite (FeTiO3): Effects of groundwater matrix

Stepwise H*-Mediated and Non-H* Reduction Processes for Highly Selective Transformation of Nitrate to Nitrogen Gas Using a ZVAl-Based Material

Improving the reduction efficiency and N2 selectivity is important for nitrate decontamination. A novel ternary ball-milled Al-Cu-AC material is reported to achieve a highly selective reduction of nitrate to N2. The reduction process, driven by the continuous dissolution of zero-valent aluminum (ZVAl), demonstrated a stepwise reduction scheme. The interesting shift in the electron-donating pathways was ascribed to the spontaneous change in the microenvironmental pH from neutral to alkaline. The Al-Cu-AC (1:1:5 mass ratio) material completely removed 30 mg/L of NO3--N over a wide pH range (5-9), achieving over 83% TN removal and N2-selectivity, without detectable copper leaching. The atomic hydrogen (H*)-mediated reduction occurring on the Cu component was proven to be crucial for the fast transformation from NO3- to NO2-, while the non-H* reduction process was dominated by the electrochemical reduction of NO2- to N2 on the AC cathode of Al || AC microgalvanic cells formed in the material. The primary reduction route from NO3- to N2 was identified as the *NOH pathway, and the superiority of the Al-Cu-AC material toward nitrate reduction was verified with actual wastewater. This study revealed how microenvironmental pH influenced the electron-donating pathways of ZVAl and provides a new approach to maximize the performance of zero-valent metals.

Ethylene Glycol (EG)-Derived Chlorine-Resistant Cu0/TiO2-x for Efficient Photocatalytic Degradation of Nitrate to N2 without Sacrificial Agents at Near-Neutral pH Conditions: The Synergistic Effects of Cu0 and EG Radicals

The selective photoreduction of nitrate to nontoxic nitrogen gas has emerged as an energy-efficient and environmentally friendly route for nitrate removal. However, the coexisting high-concentration chloride ions in wastewater can exert a significant influence on nitrate reduction due to the competitive adsorption and corrosion of Cl- on photocatalysts. Herein, we prepared ethylene glycol-Cu/TiO2-x (EG-Cu/TiO2-x) through a solvothermal reaction of Cu-doped TiO2 in an EG solution. The photodegradation of nitrate using EG-Cu/TiO2-x without adding sacrificial agents can efficiently occur in near-neutral pH solutions containing 50 mM Cl- with 95.26% of NO3- removal and 76.52% of N2 selectivity. Moreover, the photocatalyst performance remained at a high level after 8 cycles. In this work, NO3- was first converted to NH4+ by Cu0 and Ti3+, followed by the NH4+-to-N2 conversion by photogenerated chlorine free radicals. Compared to HO•, Cl•, and Cl2•-, ClO• is proved to play the predominant role in transforming NH4+ to N2. The EG radicals produced by UV light impede Cl- adsorption on Cu, protecting Cu0 from being corroded. What's more, photoelectrons can reduce Ti4+ to Ti3+ and protect Cu0 from being oxidized, enabling the stability of reactive sites. This work provides novel insights and understanding on designing photocatalysts for NO3- removal in solutions containing chloride ions, highlighting the significance of eliminating Cl- by EG radicals and adjusting the conversion process of NO3- for the efficient removal of NO3-.

Heterogeneous Fenton-like removal of tri(2-chloroisopropyl) phosphate by ilmenite (FeTiO3): Kinetic, degradation mechanism and toxic assessment

Tri(2-chloroisopropyl) phosphate (TCPP), a common organophosphate flame retardant, was frequently detected in the environment and posed threats to human health. In this work, the main component of ilmenite FeTiO₃ was synthesized by the sol-gel method and employed as the catalyst for the degradation of TCPP by activating persulfate (PS) under UV irradiation. The degradation processes were fitted by the pseudo-first-order kinetic. The k_obs value in UV/FeTiO₃/PS system was up to 0.0056 min^-1 and much higher than that in UV/PS (0.0014 min^-1), UV/FeTiO₃ (0.0012 min^-1) and FeTiO₃/PS (0.0016 min^-1) systems, demonstrating a distinct synergistic effect in TCPP removal. The degradation efficiency of TCPP increased with the increase of UV intensity, PS concentration and catalyst dosage, and with the decrease of pH. By quenching experiment and EPR analysis, ·OH was confirmed to be the dominant radical in the reaction of the UV/FeTiO₃/PS system. The possible degradation pathways of TCPP were dechlorination, dealkylation, and further oxidation of alkyl groups based on the theoretical calculation of frontier molecular orbits. The toxicity of degradation intermediates evaluated by luminescence inhibition rate of photoluminescence was higher than TCPP. Thus, TCPP can be degraded in the UV/FeTiO₃/PS system effectively at the premise of introducing controlling measures to reduce the toxicity of degradation intermediates.

Selective reduction of nitrite to nitrogen by polyaniline-carbon nanotubes composite at neutral pH

The selective reduction of nitrite (NO₂^-) to nitrogen by chemical reductant is a desirable strategy to remove NO₂^- from polluted water and wastewater. However, the residue and reuse of chemical reductant are two main issues to be addressed. Herein, a novel polyaniline-carbon nanotubes composite (PANI-CNTs) was developed by in-situ polymerization to selectively reduce NO₂^- to nitrogen gas (N₂). The used PANI-CNTs could be reused after regeneration with NaBH₄. The PANI-CNTs could reduce NO₂^- with 93.9% N₂ selectivity at initial pH of 6.8. The NO₂^- removal efficiency only decreased by 12.08% after five cycles of reduction/regeneration. The interconversion between imine nitrogen (-N) and amine nitrogen (-NH-) groups induced the chemical reduction of NO₂^- and regeneration of PANI-CNTs. PANI-CNTs exhibited an excellent performance for the removal of NO₂^- in the presence of competitive ions and in actual water and wastewater samples. This new PANI-CNTs composite may have great potential for water purification and wastewater denitrification.

Fabrication of an amorphous metal oxide/p-BiVO4 photocathode: understanding the role of entropy for reducing nitrate to ammonia

Entropy regulation makes an amorphous metal oxide/p-BiVO4 heterostructure a desirable catalyst for the NO3− reduction reaction in a photoelectrochemical system.