Assessing the protection gap for mobile and persistent chemicals during advanced water treatment - A study in a drinking water production and wastewater treatment plant

Unveiling transformation processes of cardiovascular pharmaceuticals in wastewater based on nontarget screening

Cardiovascular pharmaceuticals were extensively detected and generally coexist with their transformation products (TPs) in wastewater. However, knowledges on TPs and transformation processes for cardiovascular pharmaceuticals remained largely unclear. To fill this knowledge gap, nontarget screening combined with batch experiments were employed to reveal the transformation of five cardiovascular pharmaceuticals (atenolol, metoprolol, propranolol, bezafibrate and candesartan) in aerobic activated sludge. The removal rate constants per unit of biomass ranged from 0.0105 to 0.0571 L g SS-1 h-1 for five cardiovascular pharmaceuticals. Atenolol and bezafibrate exhibited more excellent removal efficiency (over 99 %) than other three cardiovascular pharmaceuticals. Subsequently, 33 TPs were tentatively identified and 16 of them were not reported in previous studies. Based on identified TPs, transformation pathways of five cardiovascular pharmaceuticals were proposed, which suggested acetylation, ammoniation, carboxylation, dealkylation, decarboxylation, dihydroxylation, demethylation, epoxidation, formylation, hydrogenation, hydrolysis, hydroxylation, methylation and oxidation were involved in the transformation of cardiovascular pharmaceuticals in wastewater. Notably, N- dealkylation at the site of secondary and tertiary amine, acetylation at the site of primary amine and dehydrogenation at the site of linear alkyl were summarized as the specific transformation patterns across different cardiovascular pharmaceuticals. Furthermore, the predicted results suggested that about 30 % TPs have higher persistence and bioaccumulation than parent compounds while about 40 % TPs harbored higher toxicity than parent compounds of cardiovascular pharmaceuticals. Collectively, this study unveiled the fate and transformation pathways of five cardiovascular pharmaceuticals and summarized the specific transformation patterns for them in aerobic activated sludge, which is theoretically useful to effectively remove pharmaceuticals from wastewater.

Revealing the underestimated risks of pharmaceutical transformation products in wastewater by suspect and targeted screening

Transformation products (TPs) of pharmaceuticals have raised great concerns due to the extensive detection and potentially higher concentration and toxicity than parents. However, the related knowledge on TPs of pharmaceuticals in wastewater were limited. To fill this gap, suspect screening workflow was developed to identify TPs from 28 pharmaceuticals in 12 wastewater treatment plants (WWTPs) located in Yangtze River Delta region of China. Based on the developed suspect lists included structural information and predicted retention time for 1643 TPs, 67 TPs were successfully identified at confidence levels of ≥3 and 61.12 % of them originated from non-steroidal anti-inflammatory drugs. Subsequently, target screening revealed that 4‑hydroxy-diclofenac, diclofenac-benzoic acid, N-demethylation tramadol, 10,11-dihydro-10-dihydroxycarbamazepine and 10,11-dihydro-10,11-epoxycarbamazepine exhibited high concentration up to μg/L in WWTPs. Comparatively, the cumulative concentration of TPs was higher than parents of pharmaceuticals in effluent of WWTPs. In addition, the predicted results revealed that 29.85 %, 82.09 % and 19.91 % TPs have higher toxicity, persistence and bioaccumulation than parents. Furthermore, diclofenac-benzoic acid and 10,11-dihydro-10,11-epoxycarbamazepine exhibited higher eco-risks than their corresponding parents and N-demethylation tramadol was found to be with moderated eco-risks in effluent of WWTRPs. Collectively, the present study provides holistic information on TPs for 28 pharmaceuticals in wastewater and highlights the importance for TPs of pharmaceuticals in WWTPs from the aspect of concentration, toxicity and eco-risks. In the future, not only parents, but also TPs of pharmaceuticals should be effectively managed and attenuated in wastewater.

Investigating the chemical space coverage of multiple chromatographic and ionization methods using non-targeted analysis on surface and drinking water collected using passive sampling

Multiple non-targeted analysis tools were used to look for a broad range of possible chemical contaminants present in surface and drinking water using liquid chromatography separation and high-resolution mass spectrometry detection, including both quadrupole time of flight (Q-ToF) and Orbitrap instruments. Two chromatographic techniques were evaluated on an LC-Q-ToF with electrospray ionization in both positive and negative modes: (1) the traditionally used reverse phase C18 and (2) the hydrophilic interaction liquid chromatography (HILIC) aimed to capture more polar contaminants that may be present in water. Multiple ionization modes were evaluated with an LC-Orbitrap, including electrospray (ESI) and atmospheric pressure chemical ionization (APCI), also in both positive and negative modes. A suspect screening library of over 1300 possible environmental contaminants, including pesticides, pharmaceuticals, personal care products, illicit drugs/drugs of abuse, and various anthropogenic markers was made with experimentally collected data with the LC-Q-ToF with both column types, with 227 chemicals being retained by the HILIC column. The non-targeted methods using multiple chromatographic and ionization modes were applied to environmental water samples collected with polar organic chemical integrative samplers (POCIS), including surface water upstream and downstream from wastewater effluent discharge, and the downstream drinking water intake and treated drinking water for three distinct sampling events. For the LC-Q-ToF, 442 chemical features were detected on the C18 column and 91 with the HILIC column in the POCIS extracts, while 556 features were found on the Orbitrap workflow by ESI and 131 features detected by APCI. Over 100 chemicals were tentatively identified by suspect screening and database searching. The comprehensive and systematic evaluation of these methods serve as a step in characterizing the chemical space covered when utilizing different chromatography and ionization methods, or different instrument workflows on complex environmental mixtures.

Fate of persistent and mobile chemicals in the water cycle: From municipal wastewater discharges to river bank filtrate

Persistent and mobile (PM) chemicals are considered detrimental for drinking water resources as they may pass through all barriers protecting these resources against pollution. However, knowledge on the occurrence of PM chemicals in the water cycle, that make their way into drinking water resources, is still limited. The effluents of six municipal wastewater treatment plants (WWTPs, n = 38), surface water of two rivers (n = 32) and bank filtrate of one site (n = 15) were analyzed for 127 suspected PM chemicals. In the rivers, median concentrations of 92 detected analytes ranged from 0.3 ng/L to 2.6 µg/L (tetrafluoroborate, BF4). Lower than average dilution from WWTP effluent to surface water of 43 PM chemicals suggests significant discharge from other sources. Many of these compounds were industrial chemicals, including cyanoguanidine, trifluoromethanesulfonic acid and BF4. River bank filtration (RBF) reduced the total concentration of 40 quantified compounds by 60 % from 19.5 µg/L in surface water to 8.4 µg/L in bank filtrate, on average. Of these, 20 compounds showed good removal (> 80 %), 14 intermediate (80 - 20 %) and 6 no removal (≤ 20 %), among them carbamazepine, hexafluorophosphate, and 2-pyrrolidone. 13 substances occurred at concentrations ≥ 0.1 µg/L in bank filtrate; for six of them toxicological data were insufficient for a health-based risk assessment. The regulatory definition of P and M chemicals, if used together with existing data on environmental half-lives (P) and Koc (M), showed little power to discriminate between chemicals well removed in RBF and those that were hardly removed. This comprehensive field study shows that RBF is a useful but incomplete barrier to retain PM chemicals from surface water. Thus, PM chemicals are, indeed, a challenge for a sustainable water supply.

Biomimetic Studies on the Antimicrobial Activity of Some Biocides Based on Garlic and Lavender in Surface Waters

For a given aquatic ecosystem that will be used as a water source, it is necessary to establish the quality of the water from a microbiological point of view by identifying the pathogens present in the water. The aim of this study was to determine and analyze the antimicrobial activity of some biocides derived from garlic (garlic-methanol extract) and lavender (lavender-water extract). Their efficiency was evaluated at different concentrations and contact times. Initially, through specific laboratory analyses, the microbiological characteristics of the river were determined. Biomimetic studies on the antimicrobial activity of biocides based on garlic and lavender in surface waters involved detailed exploration of how the natural antimicrobial properties of these plants can be effectively utilized to treat water contaminated with harmful microorganisms. Both the contact time and the amount of biocide used have a significant effect on the microorganisms of interest. Thus, to describe the degradation rate of coliform bacteria, a pseudo-first-order and zero-order kinetic model was used, r=-(dN/dt)=kobs·t şi r0=kobs·N0=k0, where r is the rate of degradation of microorganisms (CFU/min), N0 is the initial number of microorganisms in the aqueous solution (colony-forming unit, CFU), N is the final number of microorganisms after a contact time t (CFU), kobs is the pseudo-first-order rate constant (min-1), t is the contact time (min), r0 is the initial rate of degradation of microorganisms (CFU/min), and k0 is the pseudo-rate constant zero order (min-1). Following 60 min of treatment with 1 mL of lavender-water biocide, the inhibition rate of pathogenic microorganisms in the water reached 59.09%, whereas, under the same conditions, the garlic-methanol biocide achieved an inhibition rate of 40.86%. This study confirms the antimicrobial activity of both lavender and garlic biocides, highlighting their potential in mitigating water pollution caused by pathogens.

Unveiling intricate transformation pathways of emerging contaminants during wastewater treatment processes through simplified network analysis

As the key stage for purifying wastewater, elimination of emerging contaminants (ECs) is found to be fairly low in wastewater treatment plants (WWTPs). However, less knowledge is obtained regarding the transformation pathways between various chemical structures of ECs under different treatment processes. This study unveiled the transformation pathways of ECs with different structures in 15 WWTPs distributed across China by simplified network analysis (SNA) we proposed. After treatment, the molecular weight of the whole component of wastewater decreased and the hydrophilicity increased. There are significant differences in the structure of eliminated, consistent and formed pollutants. Amino acids, peptides, and analogues (AAPAs) were detected most frequently and most removable. Benzenoids were refractory. Triazoles were often produced. The high-frequency reactions in different WWTPs were similar, (de)methylation and dehydration occurred most frequently. Different biological treatment processes performed similarly, while some advanced treatment processes differed, such as a significant increase of -13.976 (2HO reaction) paired mass distances (PMDs) in the chlorine alone process. Further, the common structural transformation was uncovered. 4 anti-hypertensive drugs, including irbesartan, valsartan, olmesartan, and losartan, were identified, along with 22 transformation products (TPs) of them. OH2 and H2O PMDs occurred most frequently and in 80.81 % of the parent-transformation product pairs, the intensity of the product was higher than parent in effluents, whose risk should be considered in future assessment activity. Together our results provide a macrography perspective on the transformation processes of ECs in WWTPs. In the future, selectively adopting wastewater treatment technology according to structures is conductive for eliminating recalcitrant ECs in WWTPs.

Effects of wavelength on the treatment of contaminants of emerging concern by UV-assisted homogeneous advanced oxidation/reduction processes

Pollutants of emerging concern in aqueous environments present a significant threat to both the aquatic ecosystem and human health due to their rapid transfer. Among the various treatment approaches to remove those pollutants, UV-assisted advanced oxidation/reduction processes are considered competent and cost-effective. The treatment effectiveness is highly dependent on the wavelength of the UV irradiation used. This article systematically discusses the wavelength dependency of direct photolysis, UV/peroxides, UV/chlor(am)ine, UV/ClO2, UV/natural organic matter, UV/nitrate, and UV/sulfite on the transformation of contaminants. Altering wavelengths affects the photolysis of target pollutants, photo-decay of the oxidant/reductant, and quantum yields of reactive species generated in the processes, which significantly impact the degradation rates and formation of disinfection byproducts. In general, the degradation of contaminants is most efficient when using wavelengths that closely match the highest molar absorption coefficients of the target pollutants or the oxidizing/reducing agents, and the contribution of pollutant absorption is generally more significant. By matching the wavelength with the peak absorbance of target compounds and oxidants/reductants, researchers and engineers have the potential to optimize the UV wavelengths used in UV-AO/RPs to effectively remove pollutants and control the formation of disinfection byproducts.

Fates of potentially persistent and mobile organic substances in embedded outdoor columns for artificial groundwater recharge simulation

Persistent and mobile organic micropollutants (OMP) are ubiquitously found in the aquatic environment and have a high propensity to distribute in water resources and are difficult to remediate. Managed aquifer recharge systems such as artificial groundwater recharge, produce high-quality drinking water by removing numerous OMP from the source water. In this study, the fates of selected emerging and potentially persistent and mobile OMP were investigated in outdoor columns for artificial groundwater recharge simulation. Breakthrough curves of OMP were modeled to differentiate between sorption and bio-transformation. The study showed that selected OMP were persistent in the surface water and no photo-degradation was observed, except for diclofenac. The trends of dissolved organic carbon concentrations and UV light absorption at 254 nm wavelength suggest elevated biological activity in the first 0.3 m of the columns. The study revealed that the bio-transformation of cyanoguanidine, valsartan acid and diclofenac correlated with the biological activity in the sand columns. Benzyltrimethylammonium, n-(3-(dimethylamino)-propyl)methacrylamide, 1,3-di-o-tolylguanidine, 1,3-diphenylguanidine and melamine were completely eliminated within the first 0.3 m, likely due to sorption. Less mobile compounds such as carbamazepine and adamantan-1-amine also showed sorption. Sorption was also observed for diclofenac, likely due to decreased pH along the column depth. Retardation factors of several OMP were higher in the first 0.3 m of the columns, likely due to higher organic carbon contents compared to the remaining depth. Six organic substances (for example 2-acrylamido-2-methylpropane sulfonate and dimethylbenzene sulfonate) were persistent and mobile throughout the experiment. Overall, this study reveals the vital role of pH and sand organic carbon for sorption and residence time and biological activity for OMP elimination.

Dynamic Source Distribution and Emission Inventory of a Persistent, Mobile, and Toxic (PMT) Substance, Melamine, in China

Persistent, mobile, and toxic (PMT) substances are affecting the safety of drinking water and are threatening the environment and human health. Many PMT substances are used in industrial processing or consumer products, but their sources and emissions mostly remain unclear. This study presents a long-term source distribution and emission estimation of melamine, a high-production-volume PMT substance of emerging global concern. The results indicate that in China, approximately 1858.7 kilotonnes (kt) of melamine were released into the water (∼58.9%), air (∼27.0%), and soil systems (∼14.1%) between 1995 and 2020, mainly from its production and use in the decorative panels, textiles, and paper industries. The textile and paper industries have the highest emission-to-consumption ratios, with more than 90% emissions per unit consumption. Sewage treatment plants are the largest source of melamine in the environment for the time being, but in-use products and their wastes will serve as significant melamine sources in the future. The study prompts priority action to control the risk of PMT substances internationally.

Does climbazole instigate a threat in the environment as persistent, mobile and toxic compound? Unveiling the occurrence and potential ecological risks of its phototransformation products in the water cycle

Persistent, mobile, and toxic chemicals (PMT), such as the antimycotic climbazole-(CBZ), proliferate in water cycle and imperil drinking water quality, sparking off research about their environmental fate. Unlike the parent compound, its transformation products-(TPs) are scarcely investigated, much less as PMTs. To this end, phototransformation of CBZ was investigated. A novel suspect-screening workflow was developed and optimized by cross-comparing the results of the identified photo-TPs against literature data to create an enhanced HRMS-database for environmental investigations of CBZ/TPs in the water cycle. In total, 24 TPs were identified, 14 of which are reported for the first time. Isomerism, dechlorination, hydroxylation, and cleavage of the ether or C-N bond are suggested as the main transformation routes. A screening of CBZ/TPs was conducted in wastewater, leachates, surface, and groundwater, revealing a maximum concentration of 464.8 ng/L in groundwater. In silico and in vitro methods were used for toxicity assessment, indicating toxicity for CBZ and some TPs. Seemingly, CBZ is rightly considered as PMT, and a higher potential to occur in surface or groundwater than non-PM chemicals appears. Likewise, the occurrence of TPs due to PMT properties or emission patterns was evaluated.

European-wide spatial analysis of sewage treatment plants and the possible benefits to nature of advanced treatment to reduce pharmaceutical emissions

Pharmaceuticals are known to widely occur in the environment and to affect the health of ecosystems. Sewage treatment plants (STPs) are main emission pathways for pharmaceuticals, which are often not sufficiently removed during wastewater treatment. In Europe, STP treatment requirements are specified under the Urban WasteWater Treatment Directive (UWWTD). The introduction of advanced treatment techniques, such as ozonation and activated carbon, under the UWWTD is expected to be an important option to reduce pharmaceutical emissions. In this study, we present a European-wide analysis of STPs reported under the UWWTD, their current treatment level and potential to remove a set of 58 prioritised pharmaceuticals. Three different scenarios were analysed to show 1) UWWTD present effectiveness, 2) the effectiveness at full UWWTD compliance, and 3) the effectiveness when advanced treatment is implemented at STPs with a treatment capacity of >100.000 person equivalents. Based on a literature study, the potential of individual STPs to reduce pharmaceutical emissions ranged from an average of 9% for STPs with primary treatment to 84% for STPs applying advanced treatment. Results of our calculations show that European-wide emission of pharmaceuticals can be reduced with 68% when large STPs are updated with advanced treatment, but spatial differences exist. We argue that adequate attention should also be paid with regards to preventing environmental impacts of STPs with a capacity <100.000 p.e. Circa 44% of total STP effluent is emitted near Natura2000 sites (EU nature protection areas). Of all surface waters receiving STP effluent for which the ecological status has been assessed under the Water Framework Directive, 77% have a status of less than good. Relatively often only primary treatment is applied to wastewater emitted into coastal waters. This analysis can be used to further model pharmaceutical concentrations in European surface waters, to identify STPs for which more advanced treatment might be required and to protect EU aquatic biodiversity.