Development of Suberin Fatty Acids and Chloramphenicol-Loaded Antimicrobial Electrospun Nanofibrous Mats Intended for Wound Therapy

Added-Value Compounds in Cork By-Products: Methods for Extraction, Identification, and Quantification of Compounds with Pharmaceutical and Cosmetic Interest

The growing threat of climatic crisis and fossil fuel extinction has caused a boom in sustainability trends. Consumer demand for so-called eco-friendly products has been steadily increasing, built upon the foundation of environmental protection and safeguarding for future generations. A natural product that has been used for centuries is cork, resulting from the outer bark of Quercus suber L. Currently, its major application is the production of cork stoppers for the wine industry, a process that, although considered sustainable, generates by-products in the form of cork powder, cork granulates, or waste such as black condensate, among others. These residues possess constituents of interest for the cosmetic and pharmaceutical industries, as they exhibit relevant bioactivities, such as anti-inflammatory, antimicrobial, and antioxidant. This interesting potential brings forth the need to develop methods for their extraction, isolation, identification, and quantification. The aim of this work is to describe the potential of cork by-products for the cosmetic and pharmaceutical industry and to assemble the available extraction, isolation, and analytical methods applied to cork by-products, as well the biological assays. To our knowledge, this compilation has never been done, and it opens new avenues for the development of new applications for cork by-products.

Electrospun hybrid nanofibers: Fabrication, characterization, and biomedical applications

Nanotechnology is one of the most promising technologies available today, holding tremendous potential for biomedical and healthcare applications. In this field, there is an increasing interest in the use of polymeric micro/nanofibers for the construction of biomedical structures. Due to its potential applications in various fields like pharmaceutics and biomedicine, the electrospinning process has gained considerable attention for producing nano-sized fibers. Electrospun nanofiber membranes have been used in drug delivery, controlled drug release, regenerative medicine, tissue engineering, biosensing, stent coating, implants, cosmetics, facial masks, and theranostics. Various natural and synthetic polymers have been successfully electrospun into ultrafine fibers. Although biopolymers demonstrate exciting properties such as good biocompatibility, non-toxicity, and biodegradability, they possess poor mechanical properties. Hybrid nanofibers from bio and synthetic nanofibers combine the characteristics of biopolymers with those of synthetic polymers, such as high mechanical strength and stability. In addition, a variety of functional agents, such as nanoparticles and biomolecules, can be incorporated into nanofibers to create multifunctional hybrid nanofibers. Due to the remarkable properties of hybrid nanofibers, the latest research on the unique properties of hybrid nanofibers is highlighted in this study. Moreover, various established hybrid nanofiber fabrication techniques, especially the electrospinning-based methods, as well as emerging strategies for the characterization of hybrid nanofibers, are summarized. Finally, the development and application of electrospun hybrid nanofibers in biomedical applications are discussed.

Structural Elucidation of Suberin from the Bark of Cultivated Willow (Salix sp.)

Although extractives have been symbolized as major bioactive pharmacological compounds from Salix (Salicaceae) bark, we speculated that these pharmaceutical effects cannot be solely attributed to phenolic components and their derivatives, but the long-chain suberin acids also contribute to their therapeutic effects. Hence, isolation and deconstruction of suberin were conducted, for the first time, to enrich our knowledge about the macromolecular components at the cell wall of willow bark. Saponification was adopted to obtain suberin extracts at a yield of approximately 5 wt % based on the bark of the studied hybrids. Gas chromatography-mass spectrometry allowed qualification and quantification of 23 compounds from the released suberin monomers, from which fatty acids represented majority of the isolated suberin, namely, fatty acid methyl esters (C17-C19); mono-carboxylic acid (C7-C16); alpha, omega-dicarboxylic acid (C7-C16); and omega-hydroxy long-chain fatty acids (C16-C22). Additionally, the lipophilic extractive was dominated by piceol, heptacosane, β-sitosterol, and fatty acids (C16-C28) from the studied hybrids. These findings could boost our integrative approach toward full valorization of willow bark.

Air-ozonolysis activation of polyolefins versus use of laden finishing to form contact-active nonwoven materials

Two synthetic approaches were explored for modification of the polyolefins polyethylene/polypropylene (PE/PP) to form contact-active nonwoven materials. In the first approach, polymer surfaces were activated by O2-free air-ozonolysis, and then the active agent (trimethoxysilyl) propyl-octadecyl-dimethyl-ammonium chloride (C18-TSA) was covalently bound. In the second approach, the active agent was directly conjugated to the commercial 'finishing' that was then applied to the polymer. The chemical, physical and microscopic properties of the modified polymers were comprehensively studied, and their active site density was quantified by fluorescein sodium salt-cetyltrimethylammonium chloride reaction. The antimicrobial activity of the prepared nonwovens against Bacillus subtilis (Gram-positive) and Salmonella enterica (Gram-negative), and their stability at various pHs and temperatures were examined. The two approaches conferred antimicrobial properties to the modified polymers and demonstrated stable linkage of C18-TSA. However, the performance of the nonwovens formed by the first approach was superior. The study suggests two feasible and safe pathways for the modification of polyolefins to form contact-active nonwoven materials that can be further applied in various fields, such as hygiene products, medical fabrics, sanitizing wipes, and more.

Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications

Polymeric wound dressings with advanced properties are highly preferred formulations to promote the tissue healing process in wound care. In this study, a combinational technique was investigated for the fabrication of bi-layered carriers from a blend of polyvinyl alcohol (PVA) and sodium alginate (SA). The bi-layered carriers were prepared by solvent casting in combination with two surface modification approaches: electrospinning or three-dimensional (3D) printing. The bi-layered carriers were characterized and evaluated in terms of physical, physicochemical, adhesive properties and for the safety and biological cell behavior. In addition, an initial inkjet printing trial for the incorporation of bioactive substances for drug delivery purposes was performed. The solvent cast (SC) film served as a robust base layer. The bi-layered carriers with electrospun nanofibers (NFs) as the surface layer showed improved physical durability and decreased adhesiveness compared to the SC film and bi-layered carriers with patterned 3D printed layer. Thus, these bi-layered carriers presented favorable properties for dermal use with minimal tissue damage. In addition, electrospun NFs on SC films (bi-layered SC/NF carrier) provided the best physical structure for the cell adhesion and proliferation as the highest cell viability was measured compared to the SC film and the carrier with patterned 3D printed layer (bi-layered SC/3D carrier). The surface properties of the bi-layered carriers with electrospun NFs showed great potential to be utilized in advanced technical approach with inkjet printing for the fabrication of bioactive wound dressings.

Impact of PCL nanofiber mat structural properties on hydrophilic drug release and antibacterial activity on periodontal pathogens

Electrospinning enables to design and manufacture novel drug delivery systems capable of advancing the local antibacterial therapy. In this study, two hydrophilic drugs - metronidazole and ciprofloxacin hydrochloride - were loaded both individually and in combination into hydrophobic poly(ε-caprolactone) (PCL) matrix using electrospinning. We aimed to develop prolonged release drug delivery systems suitable for the treatment of periodontal diseases and understand how different rarely studied structural features, such as nanofiber mat thickness, surface area, wettability, together with intrinsic properties, like solid state and localization of incorporated drugs in nanofibers, affect the drug release. Furthermore, the safety of nanofiber mats was assessed in vitro on fibroblasts, and their antibacterial activity was tested on selected strains of periodontopathogenic bacteria. The results showed that the structural properties of nanofiber mat are crucial in particular drug-polymer combinations, affecting the drug release and consequently the antibacterial activity. The hydrophobicity of a PCL nanofiber mat and its thickness are the key characteristics in prolonged hydrophilic drug release, but only when wetting is the rate-limiting step for the drug release. Combination of drugs showed beneficial effects by inhibiting the growth of all tested pathogenic bacterial strains important in periodontal diseases.

Review: Multimodal bioactive material approaches for wound healing

Wound healing is a highly complex process of tissue repair that relies on the synergistic effect of a number of different cells, cytokines, enzymes, and growth factors. A deregulation in this process can lead to the formation of a non-healing chronic ulcer. Current treatment options, such as collagen wound dressings, are unable to meet the demand set by the wound environment. Therefore, a multifaceted bioactive dressing is needed to elicit a targeted affect. Wound healing strategies seek to develop a targeted effect through the delivery of a bioactive molecule to the wound by a hydrogel or a polymeric scaffold. This review examines current biomaterial and small molecule-based approaches that seek to develop a bioactive material for targeted wound therapy and accepted wound healing models for testing material efficacy.

Comprehensive MS and Solid-State NMR Metabolomic Profiling Reveals Molecular Variations in Native Periderms from Four Solanum tuberosum Potato Cultivars

The potato (Solanum tuberosum L.) ranks third in worldwide consumption among food crops. Whereas disposal of potato peels poses significant challenges for the food industry, secondary metabolites in these tissues are also bioactive and essential to crop development. The diverse primary and secondary metabolites reported in whole tubers and wound-healing tissues prompted a comprehensive profiling study of native periderms from four cultivars with distinctive skin morphologies and commercial food uses. Polar and nonpolar soluble metabolites were extracted concurrently, analyzed chromatographically, and characterized with mass spectrometry; the corresponding solid interfacial polymeric residue was examined by solid-state ¹³C NMR. In total, 112 secondary metabolites were found in the phellem tissues; multivariate analysis identified 10 polar and 30 nonpolar potential biomarkers that distinguish a single cultivar among Norkotah Russet, Atlantic, Chipeta, and Yukon Gold cultivars which have contrasting russeting features. Compositional trends are interpreted in the context of periderm protective function.

Novel Alternating Current Electrospinning of Hydroxypropylmethylcellulose Acetate Succinate (HPMCAS) Nanofibers for Dissolution Enhancement: The Importance of Solution Conductivity

Novel, high-yield alternating current electrospinning (ACES) and direct current electrospinning methods were investigated to prepare high-quality hydroxypropylmethylcellulose acetate succinate (HPMCAS) fibers for the dissolution enhancement of poorly soluble spironolactone. Although HPMCAS is of great pharmaceutical importance as a carrier of marketed solid dispersion-based products, it was found to be unprocessable using electrospinning. Addition of small amounts of polyethylene oxide as aid polymer provided smooth fibers with direct current electrospinning but strongly beaded products with ACES. Solution characteristics were thus modified by introducing further excipients. In the presence of sodium dodecyl sulfate, high-quality, HPMCAS-based fibers were obtained even at higher throughput rates of ACES owing to the change in conductivity (rather than surface tension). Replacement of sodium dodecyl sulfate with non-surface-active salts (calcium chloride and ammonium acetate) maintained the fine quality of nanofibers, confirming the importance of conductivity in ACES process. The HPMCAS-based fibers contained spironolactone in an amorphous form according to differential scanning calorimetry and X-ray powder diffraction. In vitro dissolution tests revealed fast drug release rates depending on the salt used to adjust conductivity. The presented results signify that ACES can be a prospective process for high-scale production of fibrous solid dispersions in which conductivity of solution has a fundamental role.