Identification of functional domains of the Escherichia coli SeqA protein

Deep phosphoproteomics of Klebsiella pneumoniae reveals HipA-mediated tolerance to ciprofloxacin

Klebsiella pneumoniae belongs to the group of bacterial pathogens causing the majority of antibiotic-resistant nosocomial infections worldwide; however, the molecular mechanisms underlying post-translational regulation of its physiology are poorly understood. Here we perform a comprehensive analysis of Klebsiella phosphoproteome, focusing on HipA, a Ser/Thr kinase involved in antibiotic tolerance in Escherichia coli. We show that overproduced K. pneumoniae HipA (HipAkp) is toxic to both E. coli and K. pneumoniae and its toxicity can be rescued by overproduction of the antitoxin HipBkp. Importantly, HipAkp overproduction leads to increased tolerance against ciprofloxacin, a commonly used antibiotic in the treatment of K. pneumoniae infections. Proteome and phosphoproteome analyses in the absence and presence of ciprofloxacin confirm that HipAkp has Ser/Thr kinase activity, auto-phosphorylates at S150, and shares multiple substrates with HipAec, thereby providing a valuable resource to clarify the molecular basis of tolerance and the role of Ser/Thr phosphorylation in this human pathogen.

The Escherichia coli SeqA protein

The Escherichia coli SeqA protein contributes to regulation of chromosome replication by preventing re-initiation at newly replicated origins. SeqA protein binds to new DNA which is hemimethylated at the adenine of GATC sequences. Most of the cellular SeqA is found complexed with the new DNA at the replication forks. In vitro the SeqA protein binds as a dimer to two GATC sites and is capable of forming a helical fiber of dimers through interactions of the N-terminal domain. SeqA can also bind, with less affinity, to fully methylated origins and affect timing of "primary" initiations. In addition to its roles in replication, the SeqA protein may also act in chromosome organization and gene regulation.

Modeling of the full-length Escherichia coli SeqA protein, in complex with DNA

The Escherichia coli SeqA protein, a negative regulator of chromosome DNA replication, prevents the overinitiation of replication within one cell cycle by binding to hemimethylated GATC sequences in the replication origin, oriC. In addition to the hemimethylated DNA-binding activity, the SeqA protein has a self-association activity, which is also considered to be essential for its regulatory function in replication initiation. To study the SeqA protein biological activity, we performed a SeqA protein model to examine its architecture. SeqA has a bipartite structure composed of a large and small lobe. The SeqA spatial conformation contributes to its ability to bind to a pair of hemimethylated GATC sequences and to its cooperative behavior.

Regulatory Network of the Initiation of Chromosomal Replication inEscherichia coli

The bacterial chromosome is replicated once during the division cycle, a process ensured by the tight regulation of initiation at oriC. In prokaryotes, the initiator protein DnaA plays an essential role at the initiation step, and feedback control is critical in regulating initiation. Three systems have been identified that exert feedback control in Escherichia coli, all of which are necessary for tight strict regulation of the initiation step. In particular, the ATP-dependent control of DnaA activity is essential. A missing link in initiator activity regulation has been identified, facilitating analysis of the reaction mechanism. Furthermore, key components of this regulatory network have also been described. Because the eukaryotic initiator complex, ORC, is also regulated by ATP, the bacterial system provides an important model for understanding initiation in eukaryotes. This review summarizes recent studies on the regulation of initiator activity.

Modulation of lambda plasmid and phage DNA replication by Escherichia coli SeqA protein

SeqA protein, a main negative regulator of the replication initiation of the Escherichia coli chromosome, also has several other functions which are still poorly understood. It was demonstrated previously that in seqA mutants the copy number of another replicon, the lambda plasmid, is decreased, and that the activity of the lambda p(R) promoter (whose function is required for stimulation of ori lambda) is lower than that in the wild-type host. Here, SeqA-mediated regulation of lambda phage and plasmid replicons was investigated in more detail. No significant influence of SeqA on ori lambda-dependent DNA replication in vitro was observed, indicating that a direct regulation of lambda DNA replication by this protein is unlikely. On the other hand, density-shift experiments, in which the fate of labelled lambda DNA was monitored after phage infection of host cells, strongly suggested the early appearance of sigma replication intermediates and preferential rolling-circle replication of phage DNA in seqA mutants. The directionality of lambda plasmid replication in such mutants was, however, only slightly affected. The stability of the heritable lambda replication complex was decreased in the seqA mutant relative to the wild-type host, but a stable fraction of the lambda O protein was easily detectable, indicating that such a heritable complex can function in the mutant. To investigate the influence of seqA gene function on heritable complex- and transcription-dependent lambda DNA replication, the efficiency of lambda plasmid replication in amino acid-starved relA seqA mutants was measured. Under these conditions, seqA dysfunction resulted in impairment of lambda plasmid replication. These results indicate that unlike oriC, SeqA modulates lambda DNA replication indirectly, most probably by influencing the stability of the lambda replication complex and the transcriptional activation of ori lambda.

Specific N-terminal interactions of the Escherichia coli SeqA protein are required to form multimers that restrain negative supercoils and form foci

The Escherichia coli SeqA protein binds preferentially to hemimethylated DNA and is required for inactivation (sequestration) of newly formed origins. A mutant SeqA protein, SeqA4 (A25T), which is deficient in origin sequestration in vivo, was found here to have lost the ability to form multimers, but could bind as dimers with wild-type affinity to a pair of hemimethylated GATC sites. In vitro, binding of SeqA dimers to a plasmid first generates a topology change equivalent to a few positive supercoils, then the binding leads to a topology change in the "opposite" direction, resulting in a restraint of negative supercoils. Binding of SeqA4 mutant dimers produced the former effect, but not the latter, showing that a topology change equivalent to positive supercoiling is caused by the binding of single dimers, whereas restraint of negative supercoils requires multimerization via the N-terminus. In vivo, mutant SeqA4 protein was not capable of forming foci observed by immunofluorescence microscopy, showing that N-terminus-dependent multimerization is required for building SeqA foci. Overproduction of SeqA4 led to partially restored initiation synchrony, indicating that origin sequestration may not depend on efficient higher-order multimerization into foci, but do require a high local concentration of SeqA.

Dimeric configuration of SeqA protein bound to a pair of hemi-methylated GATC sequences

The binding of SeqA protein to hemi-methylated GATC sequences (hemi-sites) regulates chromosome initiation and the segregation of replicated chromosome in Escherichia coli. We have used atomic force microscopy to examine the architecture of SeqA and the mode of binding of one molecule of SeqA to a pair of hemi-sites in aqueous solution. SeqA has a bipartite structure composed of a large and a small lobe. Upon binding of a SeqA molecule to a pair of hemi-sites, the larger lobe becomes visibly separated into two DNA binding domains, each of which binds to one hemi-site. The two DNA binding domains are held together by association between the two multimerization domains that make up the smaller lobe. The binding of each DNA binding domain to a hemi-site leads to bending of the bound DNA inwards toward the bound protein. In this way, SeqA adopts a dimeric configuration when bound to a pair of hemi-sites. Mutational analysis of the multimerization domain indicates that, in addition to multimerization of SeqA polypeptides, this domain contributes to the ability of SeqA to bind to a pair of hemi-sites and to its cooperative behavior.

Binding of SeqA protein to hemi-methylated GATC sequences enhances their interaction and aggregation properties

The SeqA protein regulates chromosome initiation and is involved in segregation in Escherichia coli. One SeqA protein binds to two hemi-methylated GATC sequences to form a stable SeqA-DNA complex. We found that binding induced DNA bending, which was pronounced when the two sequences were on the same face of the DNA. Two SeqA molecules bound cooperatively to each pair of hemi-methylated sites when the spacing between the sites was < or = 30 bp. This cooperative binding was able to stabilize the binding of a wild type to a single hemi-methylated site, or mutant form of SeqA protein to hemi-methylated sites, although such binding did not occur without cooperative interaction. Two cooperatively bound SeqA molecules interacted with another SeqA bound up to 185 bp away from the two bound SeqA proteins, and this was followed by aggregation of free SeqA proteins onto the bound proteins. These results suggest that the stepwise interaction of SeqA proteins with hemi-methylated GATC sites enhances their interaction and leads to the formation of SeqA aggregates. Cooperative interaction followed by aggregation may be the driving force for formation of the SeqA foci that appear to be located behind replication forks.

Structural and biochemical analyses of hemimethylated DNA binding by the SeqA protein

The Escherichia coli SeqA protein recognizes the 11 hemimethylated G-mA-T-C sites in the oriC region of the chromosome, and prevents replication over-initiation within one cell cycle. The crystal structure of the SeqA C-terminal domain with hemimethylated DNA revealed the N6-methyladenine recognition mechanism; however, the mechanism of discrimination between the hemimethylated and fully methylated states has remained elusive. In the present study, we performed mutational analyses of hemimethylated G-mA-T-C sequences with the minimal DNA-binding domain of SeqA (SeqA71-181), and found that SeqA71-181 specifically binds to hemimethylated DNA containing a sequence with a mismatched mA:G base pair [G-mA(:G)-T-C] as efficiently as the normal hemimethylated G-mA(:T)-T-C sequence. We determined the crystal structures of SeqA71-181 complexed with the mismatched and normal hemimethylated DNAs at 2.5 and 3.0 A resolutions, respectively, and found that the mismatched mA:G base pair and the normal mA:T base pair are recognized by SeqA in a similar manner. Furthermore, in both crystal structures, an electron density is present near the unmethylated adenine, which is only methylated in the fully methylated state. This electron density, which may be due to a water molecule or a metal ion, can exist in the hemimethylated state, but not in the fully methylated state, because of steric clash with the additional methyl group.

Sequential binding of SeqA to paired hemi-methylated GATC sequences mediates formation of higher order complexes

Preferential binding of the SeqA protein to hemi-methylated GATC sequences functions as a negative regulator for Escherichia coli initiation of chromosomal replication at oriC and is implicated in segregating replicated chromosomes for cell division. We demonstrate that sequential binding of one SeqA tetramer to a set of two hemi-methylated sites mediates formation of higher-order complexes. The absence of cross-binding to separate DNAs suggests that two monomers of a SeqA tetramer bind to two hemi-methylated sites on DNA. The interaction among SeqA proteins bound to at least six adjacent hemi-methylated sites induces aggregation of free proteins to bound proteins. Aggregation might be indicative of SeqA foci, which appear to track replication forks in vivo. Studies of the properties of SeqA binding will contribute to our understanding of the function of SeqA.