Distal femoral fracture fixation utilizing the Less Invasive Stabilization System (L.I.S.S.): the technique and early results

Severity of Complications after Locking Plate Osteosynthesis in Distal Femur Fractures

Background: Locked plating for distal femur fractures is widely recommended and used. We systematically reviewed clinical studies assessing the benefits and harms of fracture fixation with locked plates in AO/OTA Type 32 and 33 femur fractures. Methods: A comprehensive literature search of PubMed, Embase, Cinahl, Web of Science, and the Cochrane Database was performed. The studies included randomized and non-randomized clinical trials, observational studies, and case series involving patients with distal femur fractures. Studies of other fracture patterns, studies conducted on children, pathological fractures, cadaveric studies, animal models, and those with non-clinical study designs were excluded. Results: 53 studies with 1788 patients were found to satisfy the inclusion and exclusion criteria. The most common harms were nonunion (14.8%), malunion (13%), fixation failure (5.3%), infection (3.7%), and symptomatic implant (3.1%). Time to full weight-bearing ranged from 5 to 24 weeks, averaging 12.3 weeks. The average duration of follow-up was 18.18 months, ranging from 0.5 to 108 months. Surgical time ranged between 40 and 540 min, with an average of 141 min. The length of stay in days was 12.7, ranging from 1 to 61. The average plate length was ten holes, ranging from 5 to 20 holes. Conclusion: This review aimed to systematically synthesize the available evidence on the risk associated with locked plating osteosynthesis in distal femur fractures. Nonunion is the most common harm and is the primary cause of reoperation. The overall combined risk of a major and critical complication (i.e., requiring reoperation) is approximately 20%.

Resistant distal femoral nonunion treated with combined nail/plate construct and reamer-irrigator-aspirator technique

OBJECTIVE

This study was performed to evaluate the effectiveness of intramedullary nailing and a lateral locking plate combined with the reamer-irrigator-aspirator (RIA) bone grafting technique for resistant distal femoral nonunion.

METHODS

This retrospective observational study was performed from January 2018 to December 2021 and involved five patients who presented with resistant distal femoral nonunion despite undergoing several surgeries. They were treated with intramedullary nailing and a lateral locking plate combined with the RIA bone grafting technique. Postoperative follow-up was performed to observe the healing time, and functional outcomes were evaluated using the Lower Extremity Functional Scale (LEFS).

RESULTS

After the patients had been monitored for a mean of 17.9 months, complete bone healing was observed in every patient (mean healing time of 4.8 months). Postoperative wound failure in an older patient was successfully treated with resuturing and nutritional assistance. At the last follow-up, the mean LEFS score was 71.2/80 and the mean knee flexion was 109 degrees.

CONCLUSIONS

Our study demonstrates that combining intramedullary nailing and a lateral locking plate with the RIA bone grafting technique enhances biological properties, provides good structural support, and achieves good union and functional results in the management of resistant nonunion of the distal femur.

Clinical effect of closed reduction minimally invasive fixation in intra-articular comminuted fractures of the femoral condyle

Objective

To evaluate the advantages of double reverse traction closed reduction combined with minimally invasive fixation in treating femoral condylar comminuted fractures.

Methods

We retrospectively enrolled a total of 24 patients with femoral condylar comminuted fractures (AO = 33C3) admitted to Third Hospital of Hebei Medical University from March 2018 to February 2020. The patients were divided into two groups: experimental group (double reverse traction, n = 12) and control group (conventional surgery, n = 12). Patient demographics, fracture characteristics, operation time, incision length, and postoperative complications were then collected. The Hospital for Special Surgery (HSS) scores were recorded at the last follow-up visit.

Results

The average surgical time was 52.2 (41-73) min in the experimental group and 71.2 (45-103) min in the control group. In addition, the mean total incision length was 13.8 (11-17) cm in the experimental group and 16.3 (14-19) cm in the control group. The average HHS scores at the final follow-up were 86.3 (78-93) and 82.7 (76-90) in the experimental group and control group, respectively.

Conclusion

It was found that double reverse traction closed reduction combined with minimally invasive fixation can provide good repositioning results and functional extremity. Moreover, patients tolerate postoperative functional knee exercises well.

Study of Clinical Results and Functional Outcome of Patients With Distal Femur Fracture Treated With Dual Plating

Introduction Distal femur fracture has been routinely fixed with a single lateral locking plate. This method of fixation in intra-articular distal femur fractures has proved to give a higher outcome of varus collapse as well as higher rates of mal-union due to inadequate fixation of the medial aspect of the distal femur. To address this drawback of single lateral plating, the use of medial assisted plating (MAP) has been introduced recently, which was proposed to give better stability to the medial fragments. This Is a prospective case series of 50 patients with distal femur fractures treated with dual plating. Materials and methods Fifty cases of patients with distal femur fractures were treated with dual plating between August 2020 and September 2022. Patients were followed up postoperatively till the third month, when patients were assessed clinically and radiologically. Range of motion of the knee, postoperative fracture displacement, limb shortening, and signs of union and infection were checked. Neer's scoring and Kolmet's scoring were used to grade the outcome for the patients.  Results The mean age of the patients was 39. Only 12% of the cases were open fractures. Eighty-four percent of the cases did not have fixed flexion deformity (FFD) and only 4% had FFD of 15 degrees; 72% of the cases achieved flexion of the knee beyond 120 degrees. Eighty-four percent of patients had normal walking ability by the 12th week postoperatively; 16% of the cases had a postoperative displacement of more than 1.6 cm, with the maximum being 2.5 cm.  Conclusion From the study, we have concluded that outcomes were better for fractures of distal femur when treated with dual fixation, probably due to superior fixation and earlier postoperative mobilization.

Endosteal plating for the treatment of malunions and nonunions of distal femur fractures

PURPOSE

To describe the surgical technique and the outcome of a case series of nonunion and malunion of distal femur fractures treated with an endosteal medial plate combined with a lateral locking plate and with autogenous bone grafting.

METHODS

We retrospectively analyzed a series of patients with malunion or nonunion of the distal femur treated with a medial endosteal plate in combination with a lateral locking plate, in a period between January 2011 and December 2019, Database from chart review was obtained including all the clinical relevant available baseline data (demographics, type of fracture, mechanism of injury, time from injury to surgery, number of previous surgical procedures, type of bone graft, and type of lateral plate). Time to bone healing, limb alignment at follow-up and complications were documented.

RESULTS

Ten patients were included into the study: 7 male and 3 female with mean age of 48.3 years (range 21-67). The mechanism of trauma was in 8 cases a road traffic accident and in 2 cases a fall from height. According to AO/OTA classification 5 fractures were 33 A3, 3 were 33 C1, 1 was 33 C2 and 1 was 33 C3. The average follow up was 13.5 months. In all cases but one bony union was achieved. Bone healing was observed in average 3.3 months after surgery. No intraoperative or postoperative complications were reported.

CONCLUSION

A medial endosteal plate is a useful augmentation for lateral plate fixation in nonunion or malunion following distal femur fractures, particularly in cases of medial bone loss, severe comminution, or poor bone quality.

LEVEL OF EVIDENCE

Level IV (retrospective case series).

KNEE PERIPROSTHETIC FRACTURES IN THE ELDERLY: CURRENT CONCEPT

Periprosthetic fractures around total knee arthroplasty in elderly represent an emerging cause of implant revision and their incidence seems destined to further increase in the upcoming years, considering the ever-increasing number of implanted prostheses. These are complex injuries with very high complication rates. It has been estimated that the incidence of femoral periprosthetic fractures after T.K.A. ranged between 0,3 to 2,5%, but increases up to 38% when considering revision T.K.A. Patient-related risk factors for T.K.A. periprosthetic fracture (T.K.A.P.F.) include osteoporosis, age, female sex, revision arthroplasty and peri-implant osteolysis. The grate debate concerns the choice of the most appropriate fixation device for T.K.A.P.F.: closed or open reduction with internal fixation with either locked plate or intramedullary nail is the most commonly used for treating these fractures. Success of these methods depends on the fracture pattern, the stability of implants, and the patient’s bone quality which is often poor in elderly, thus resulting in high complication rates. Conversely, a revision of T.K.A. (R.T.K.A.) should be considered in case of prosthetic component instability, severe comminution or metaphyseal extension of the fracture (that precludes a good fixation), previous treatments failure and severe malalignment of T.K.A. Instead megaprosthesis and allograft-prosthesis composite are necessary in case of sever bone loss. Considering the variability of the clinical scenario of T.K.A.P.F., this complex injury requires and experienced and comprehensive approach based on both facture fixation and/or revision arthroplasty.

Axial and Rotational Malreduction (Golf Club Deformity) in Distal Femur Fractures

OBJECTIVES

To describe malreduction of supracondylar distal femur fractures stabilized with lateral femoral locking plates and determine whether a mismatch in axial lateral distal femur anatomy and lateral distal femoral plate design contributes to supracondylar distal femoral fracture malreduction.

MATERIALS AND METHODS

OTA/AO 33A were simulated in 7 cadaver femurs and fixed with a lateral distal locking femoral plate placed flush to the lateral femoral condyle (group 1). In group 2, the anterior flange of the plate was externally rotated 10 degrees in relation to the lateral condyle. A motion capture system measured translation and rotation of the articular segment as shaft screws were applied, reducing plate to femoral diaphysis. Articular segment movement was compared between groups using paired Student t test, P < 0.05. A large database of 3D scans of 800 femurs was used to define the relationship of the lateral femoral condyle to the lateral cortical surface of the human femur.

RESULTS

Malreduction was observed with anatomic plate application results from medial translation (17 mm) and external rotation (12.2 degrees) (group 1). Modifying plate geometry to match lateral femur anatomy (group 2) improved medial translation by 46% and external rotation by 80%. An analysis of the shape of the 800 distal femurs showed that the average posterior anterior inclination is 16.5 degrees.

CONCLUSIONS

Anatomic application of distal femoral plates results in significant malreduction. Modifying the plate design to accommodate 10 degrees slope of lateral distal femur results in partial correction of deformity. Future studies should investigate other means of correcting the malalignment, especially considering the 16.5-degree posterior anterior inclination of the condyle.

Fractures of the distal femur in elderly patients: retrospective analysis of a case series treated with single or double plate

Introduction

We evaluated the radiologic and clinical outcomes of a lateral incision single plate with and a single-incision double plating in elderly patients with osteoporotic distal femoral fractures.

Materials and methods

We performed a retrospective study of 82 cases of distal femoral fractures from May 2004 to June 2018. Group A consisted of 42 patients who underwent single-plate fixation. Group B consisted of 40 patients who underwent double-plate fixation. The mean patient age was 77 years (67–87 years) and 76 years (64–86 years) in groups A and B, respectively. All patients were evaluated for procedure duration, time to union, range of knee motion, Lysholm knee score, and presence of complications.

Results

The average procedure time was 81 min (66–92 min) and 110 min (95–120 min) in groups A and B, respectively (p = 0.33). One case in group B required bone grafting after 5 months. The average time to union was 14 weeks (9–19 weeks) and 12.2 weeks (8–19 weeks) (p = 0.63), and the mean range of knee motion was 105° (90–125°) and 110.7° (90°–130°) (p = 0.37) in groups A and B, respectively. There was no significant statistical difference between the two groups in the Lysholm knee score (p = 0.44) and knee society score (p = 0.53).

Conclusion

The clinical and radiological outcomes were similar in the 2 groups. In elderly patients, double plate fixation for distal femoral fractures is an useful method for several advantages such as adequate exposure, easy manipulation, anatomical reduction and stable fixation.

Minimally invasive plate osteosynthesis with dual plating for periprosthetic distal femoral fractures following total knee arthroplasty

Introduction

Adequate treatment for periprosthetic distal femur fractures is challenging because of various reasons, including severe osteoporosis and distal fragments that are too small or too distal. We have introduced a new surgical technique for dual plating of periprosthetic distal femur fractures following total knee arthroplasty (TKA) and determined the clinical and radiological outcomes of minimally invasive plate osteosynthesis (MIPO) with a dual locking compression plate (LCP).

Materials and methods

Between January 2010 and July 2019, 18 patients [mean age, 74.8 (68–89) years; average follow-up period, 14.8 (12–43) months] underwent MIPO with distal femoral LCP laterally and proximal humeral internal locking system (PHILOS) medially for periprosthetic distal femoral fractures following TKA. The minimum follow-up was 1 year. The clinical and radiological outcomes were assessed using the modified WOMAC scores, knee range of motion, time to callus formation, time to union, and complications of malunion, nonunion, and shortening.

Results

The average time to union was 18.4 weeks (range, 10–51 weeks) and to callus formation was 7.8 weeks (range, 2–14 weeks). At the 1-year follow-up, the average JLETS was 37.6 (range, 24–53), average knee ROM was 110.3° (range, 80–135°), and average varus-valgus angles of the distal femur were 3.2° (range, −2.9–10.5°). No nonunion, broken plates, or implant failure occurred. Malunion occurred in three patients.

Conclusion

MIPO with dual LCP is a reliable method for stabilizing periprosthetic distal femoral fractures following TKA, with satisfactory bone union rates and low complication rates.

The effect of surgeon-controlled variables on construct stiffness in lateral locked plating of distal femoral fractures

Background

Nonunion following treatment of supracondylar femur fractures with lateral locked plates (LLP) has been reported to be as high as 21 %. Implant related and surgeon-controlled variables have been postulated to contribute to nonunion by modulating fracture-fixation construct stiffness. The purpose of this study is to evaluate the effect of surgeon-controlled factors on stiffness when treating supracondylar femur fractures with LLPs:

Does plate length affect construct stiffness given the same plate material, fracture working length and type of screws?

Does screw type (bicortical locking versus bicortical nonlocking or unicortical locking) and number of screws affect construct stiffness given the same material, fracture working length, and plate length?

Does fracture working length affect construct stiffness given the same plate material, length and type of screws?

Does plate material (titanium versus stainless steel) affect construct stiffness given the same fracture working length, plate length, type and number of screws?

Methods

Mechanical study of simulated supracondylar femur fractures treated with LLPs of varying lengths, screw types, fractureworking lenghts, and plate/screw material. Overall construct stiffness was evaluated using an Instron hydraulic testing apparatus.

Results

Stiffness was 15 % higher comparing 13-hole to the 5-hole plates (995 N/mm849N vs. /mm, p = 0.003). The use of bicortical nonlocking screws decreased overall construct stiffness by 18 % compared to bicortical locking screws (808 N/mm vs. 995 N/mm, p = 0.0001). The type of screw (unicortical locking vs. bicortical locking) and the number of screws in the diaphysis (3 vs. 10) did not appear to significantly influence construct stiffness (p = 0.76, p = 0.24). Similarly, fracture working length (5.4 cm vs. 9.4 cm, p = 0.24), and implant type (titanium vs. stainless steel, p = 0.12) did also not appear to effect stiffness.

Discussion

Using shorter plates and using bicortical nonlocking screws (vs. bicortical locking screws) reduced overall construct stiffness. Using more screws, using unicortical locking screws, increasing fracture working length and varying plate material (titanium vs. stainless steel) does not appear to significantly alter construct stiffness. Surgeons can adjust plate length and screw types to affect overall fracture-fixation construct stiffness; however, the optimal stiffness to promote healing remains unknown.

Comparison of three methods of Müller type C2 and C3 distal femoral fracture repair

Background

We compared the outcomes of three fixation techniques for Müller type C2 and C3 distal femoral fractures.

Methods

We retrospectively analyzed patients undergoing internal fixation for Müller type C2 and C3 distal femoral fractures via locking plate (Group A), lateral locking condylar plate and medial contoured reconstruction plate (Group B), and lateral locking condylar plate and anterior reconstruction plate (Group C). Knee joint functional recovery and functional outcomes were evaluated 12 months postoperatively.

Results

Patients included 34 men and 24 women aged 25 to 74 years (mean, 50.3 ± 10.73 years). Operating times were longest in Group B and similar in Groups A and C. Bleeding volume in Group A was smaller than in Group B and similar to that of Group C. Functional outcomes were excellent in 18 (31%) fractures, good in 24 (41%), moderate in 11 (19%), and poor in 5 (9%). Good-to-excellent results were achieved in 56%, 82%, and 83% of patients (Groups A, B, and C, respectively). Groups B and C's outcomes were superior to Group A's outcomes. No significant difference in postoperative complications between the groups existed.

Conclusion

Lateral locking condylar and anterior reconstruction plating was useful for complex type C distal femoral fractures.

External Fixator-Assisted Reduction of Distal Femur Fractures: A Technical Trick

Restoration of anatomical alignment while preserving the soft-tissue envelope around the fracture site remains a challenge during distal femur fracture fixation. Although the lateral distal femoral locking plate allows surgeons to achieve adequate bony stability, their application has been associated with malalignment leading to inferior outcomes. We propose a biologically friendly, percutaneous technique that sequentially reduces and aligns distal femur fractures with an anterior external fixator before definitive fixation with a lateral distal femoral locking plate.

Biphasic plating improves the mechanical performance of locked plating for distal femur fractures

Internal fixation by plate osteosynthesis is the gold standard treatment for distal femur fractures. Despite improvements that preserve the biological conditions for bone healing, there are concerns standard locked plating constructs may be overly stiff. Biphasic plating is a novel concept designed to provide suitable fracture motion and increased implant strength to support early full weight-bearing. This study aims to demonstrate that the Biphasic Plate can be incorporated into a pre-contoured distal femur plate while providing adequate flexibility and increased implant strength. The mechanical performance of the Biphasic Plate (BP) was investigated in comparison to a standard locking plate for the distal femur (LCP-DF). Constructs were formed by mounting the implants on a bone substitute. The construct stiffness and strength under axial loading and the magnitude of interfragmentary movement were determined using finite element analysis. The Biphasic Plate exhibited a bi-linear stiffness response; at low loads, the BP construct was 55% more compliant and at high loads 476% stiffer than the LCP-DF. The Biphasic Plate provided more consistent interfragmentary movement over a wider loading range. At partial weight-bearing loads, the Biphasic Plate produced larger interfragmentary movements (0.18 vs. 0.04 mm). However, at loads equivalent to full weight-bearing, the maximum movements were substantially smaller than the LCP-DF construct (1.5 vs. 3.5 mm). The increased flexibility at low loads was provided without sacrificing implant strength with peak stress in the Biphasic Plate 63% lower than the LCP-DF construct. The biphasic plating concept can be successfully incorporated into anatomically contoured distal femur plates while providing adequate flexibility and increasing implant strength.

Radiostereometric Analysis of Stability and Inducible Micromotion After Locked Lateral Plating of Distal Femur Fractures

OBJECTIVES

To evaluate interfragmentary motion over 1 year after distal femoral fracture fixation using radiostereometric analysis (RSA). The secondary aim was to assess whether RSA data are consistent with diagnoses of nonunion.

DESIGN

Prospective cohort study.

SETTING

Level I urban trauma center.

PATIENTS

Sixteen patients between 22 and 89 years of age with distal femoral fracture (OTA/AO type 33).

INTERVENTION

All fractures were treated with a lateral locking plate, and tantalum markers were inserted into the main proximal and distal fracture fragments. RSA was performed at 2, 6, 12, 18, and 52 weeks postoperatively. Both unloaded and loaded RSA measurements were performed.

MAIN OUTCOME MEASUREMENTS

Unloaded fracture migration over time and inducible micromotion at the fracture site in the coronal plane were determined at each follow-up interval.

RESULTS

RSA precision in the coronal plane of interfragmentary motion over time and inducible micromotion were 1.2 and 0.9 mm in the coronal plane, respectively. Two cases required revision surgery for nonunion 1 year postoperatively. For cases of union, unloaded fracture migration stopped being detectable between 12 and 18 weeks, and inducible micromotion was no longer detectable by the 12-week visit. For cases of nonunion, both unloaded migration and inducible micromotion were detected throughout the study period.

CONCLUSIONS

RSA may be used to reliably assess distal femoral fracture healing. RSA revealed differences in cases of union and nonunion by 3 months and more consistently than traditional x-rays.

LEVEL OF EVIDENCE

Diagnostic Level II. See Instructions for Authors for a complete description of levels of evidence.

Dual Plating of the Distal Femur: Indications and Surgical Techniques

Dual-plating of the distal femur is required in some cases to achieve stable fixation. The indications of a medial plate in addition to the lateral plate are medial supracondylar bone loss, low trans-condylar bicondylar fractures, medial Hoffa fracture, peri-prosthetic distal femur fractures, non-union after failed fixation with single lateral plate, poor bone quality and comminuted distal femur fractures (AO type C3). We recommend orthogonal plate configuration with locked plates by a single incision or dual incision approach as per surgeon choice.

Additional fixation of medial plate over the unstable lateral locked plating of distal femur fractures: A biomechanical study

INTRODUCTION

Lateral locked plating is a standard treatment option for distal femur fractures. However, the unstable conditions after lateral locked plating are increasing. The objective of this study was to investigate the biomechanical strength of additional medial plate fixation over the unstable lateral locked plating of distal femur fractures.

MATERIALS AND METHODS

A distal femur fracture model (AO/OTA 33-A3) was created with osteotomies in the composite femur. Three study groups consisting of 6 specimens each were created for single-side lateral locked plating with 6 distal locking screws (LP-6), single-side lateral locked plating with 4 distal locking screws (LP-4), and additional medial locked plating on LP-4 construct (DP-4). A compressive axial load (10 mm/min) was applied in the failure test. Mode of failure, load to failure, and ultimate displacement were documented.

RESULTS

All single-side lateral locked plating (LP-4 and LP-6) showed plate bending at the fracture gap, while none of the DP-4 showed plate bending at the fracture gap. Load to failure of DP-4 (mean 5522 N) was 17.1% greater than that of LP-6 (mean 4713.3 N, p < 0.05) and 29.2% greater than that of LP-4 (mean 4273.2 N, p < 0.05). Ultimate displacement of DP-4 (mean 5.6 mm) was significantly lower than that of LP-6 (mean 8.8 mm, p < 0.05) and LP-4 (mean 9.1 mm, p < 0.05).

CONCLUSIONS

Additional fixation of medial plate significantly increased the fracture stability in distal femur fractures fixed with the lateral locked plating. Especially in the clinical situations where sufficient stability cannot be provided at the distal segment, the medial plate may be considered as a useful biomechanical solution to obtain adequate stability for fracture healing.

Intraoperative Assessment of Coronal Alignment in Distal Femur Fracture Fixation: Technical Trick

Supracondylar femur fractures represent a challenging and common injury treated by many orthopedic surgeons. An array of surgical fixation options has been developed to help the treating surgeon restore normal anatomic alignment of these fractures, and lateral precontoured condylar femoral locking plates have become a common implant for most surgeons in treating these fractures. Although these precontoured plates provide significant benefit to the treating physician in regards to gaining appropriate bony fixation, common technical errors that may lead to malalignment when using these plates have been described. Avoiding these errors will help improve patient outcomes. Here, we describe a novel, inexpensive, and universally available technique that may aid the treating surgeon in restoring coronal alignment when treating distal femur fractures.

Single-Incision Double-Plating Approach in the Management of Isolated, Closed Osteoporotic Distal Femoral Fractures

INTRODUCTION

Distal femoral fractures in elderly population had recorded an increase in incidence in the last 2 decades. Lateral distal femoral locking plating is considered one of the best options especially when dealing with comminuted fractures but varus collapse of the medial femoral condyle occurs frequently in patients with osteoporosis. Anatomical reduction of the fracture with stable rigid fixation using double-plating approach allows early mobilization of geriatric population and prevents varus collapse minimizing the comorbidities in such fractures.

PATIENTS AND METHODS

Between September 2014 and January 2017, a prospective study on 23 patients with comminuted osteoporotic distal femoral fractures managed through the double-plating approach through a single parapatellar approach has been conducted. Only osteoporotic geriatric patients with isolated distal femoral fractures were included. Polytraumatized, open fractures, and fracture type 33-A1, 33-A2, and 33-B were excluded. The mean age was 69.6 years (61-80). All patients have been evaluated as regard duration of procedure, time to union, EQ-5D-5L score, the need of autologous bone grafts, range of knee motion, and presence of complications.

RESULTS

The average follow-up was 14.1 months. The majority of fractures were type 33-C2 (13 patients). Average procedure time was 148 minutes (117-193 minutes). Mean EQ-5D-5 L score was 83.8 (72-82). Average time to union was 9 months (3-12 months). Four (17.4%) cases needed autologous bone graft after 6 months. No loss of reduction in any of the cases was evident, although 6 (26%) cases had screw breakage or cutout in one of the plate fixation. Two (8.7%) patient developed superficial wound infection and 1 (4.3%) developed DVT.

DISCUSSION

This study aimed at evaluation of the success of double plating of distal femoral fractures in geriatric population. different fixation methods were studied for reduction and fixation of such a fracture such as external fixation, intramedullary nails and lateral plating. the quality of fracture reduction, functional and radiological outcomes, time to union, the need for bone grafting and complication are the main debatable issues.

CONCLUSION

Single-incision double-plating approach for distal femoral osteoporotic fractures is effective and provides stable construct without reduction loss allowing early rehabilitation. Delayed union and the need for bone graft are the major drawbacks for this technique.

Tubular vs Profile Plate in Peroneal or Bimalleolar Fractures: is There a Real Difference in Skin Complication? A Retrospective Study in Three Level I Trauma Center

Introduction:

Not enough literature is available to evalute the wound complication rate of plates type in distal fibular fractures.

Aim:

The aim of our study was to compare wound complications of using a third tubular plate compared to LCP distal fibula plate.

Material and Methods:

This study is a retrospective single-centre study in which was performed plating of fibula in closed ankle fractures. 93 patients were included in our study and assigned in two groups, based on using of different implant : in group A 48 patients were treated with one-third tubular and in group B 45 patients were treated with LCP distal fibula plate. There were no significant differences in the baseline characterisctics. Patients received the same surgical procedure and the same post-operative care, then they were radiologically evalueted at 1-3-12 months and clinical examination was made at 12 months using AOFAS clinical rating system. Categorical data, grouped into distinct categories, were evalueted using Chi-square test. We considered a p value < 0.05 as statistically significant.

Results:

The wound complications rate of the overall study group was 7.6%. There were no statistical differences in the rate of wound complications between the two groups. There were no differences between both group in percentage of hardware removal at follow-up (overall 5.4%); plate removal was performed earlier in the locking plate because of wound complications.

Conclusions:

Our study has shown no difference in radiographic bone union rate, no significant differences in terms of clinical outcomes, in time of bone reduction and wound complication rate between the LCP distal fibula plate and conventional one-third tubular plate. Controversy still exists about the best method for the fracture reduction.

Comparative study between biologic plating and intramedullary nailing for the treatment of subtrochanteric fractures: Is biologic plating using LCP-DF superior to intramedullary nailing?

BACKGROUND

The objective of this study is to evaluate the outcome measures of subtrochanteric fractures between biologic plating and intramedullary nailing and determine if biologic plating is superior to intramedullary nailing.

METHODS

Between March 2009 and December 2015, 81 patients with subtrochanteric fractures were enrolled (52 males and 29 females; 31 treated with biologic plating and 50 with intramedullary nailing). Biologic plating was conducted consecutively between May 2011 and March 2013 and intramedullary nailing was performed for the rest of period. Perioperative outcomes including operation time and blood loss during the operation; postoperative radiologic outcomes including union, time to union, coronal alignment, and shortening of the femur; and clinical outcomes including walking ability and pain were evaluated. The biologic plating group was compared with the intramedullary nailing group as a historical control.

RESULTS

No significant differences were identified for bony union and time to union between the two different fixation methods Coronal alignment was significantly better in the biologic plating group than in the intramedullary nailing group (p<0.016). Postoperative coronal alignment was the only risk factor associated with the nonunion of subtrochanteric fractures (unadjusted OR: 1.915, 95% CI: 0.190 - 19.273; adjusted OR: 0.042, 95% CI: 0.000 - 21.517; p=0.320).

CONCLUSION

Surgical outcomes using LCP-DF are comparable to those using intramedullary nailing. Further clinical studies with a larger sample size are required to show the advantage of biologic plating for the treatment of subtrochanteric fractures.

Open Supracondylar-Intercondylar Fractures of the Femur Treatment With Taylor Spatial Frame

OBJECTIVES

To evaluate the Taylor spatial frame (TSF) for primary and definitive fixation of open supracondylar-intracondylar femoral (SIF) fractures.

DESIGN

Retrospective.

SETTING

Level I trauma center.

PATIENTS

Subset of 20 SIF open fractures treated with TSF extracted from a consecutive series of 80 SIF fractures treated between 2007 and 2013.

INTERVENTION

Eighteen (90%) fractures underwent definitive fixation with the TSF; 2 were treated primarily within 24 hours of injury. Mean time interval between primary treatment and secondary TSF was 5 days.

MAIN OUTCOME MEASUREMENTS

Clinical and radiological.

RESULTS

Complete union was obtained in 17 (85%) fractures without additional surgery at an average of 33 weeks. Three nonunions and 1 malunion occurred. No deep infection occurred. Results based on Association for the Study and Application of the Method of Ilizarov criteria: 37% excellent, and 63% good for bone outcomes; 5% excellent, 58% good, and 37% fair for functional outcomes. Neer knee scores were 21% excellent, 68% good, and 11% fair. The mechanical lateral distal femoral angle and anatomic posterior distal femoral angle values were within normal range in 80% and 90% of patients, respectively. Abnormal mechanical axis deviation was observed in 4 (20%) cases (2 had associated tibia fractures).

CONCLUSIONS

Primary and definitive fixation with the TSF are effective. Advantages include continuity of device until union, reduced risk of infection, early mobilization, restoration of primary defect caused by bone loss, easy and accurate application, convertibility and versatility, and improved union rate and range of motion for SIF open fractures.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Outcomes of Distal Femur Nonunions Treated With a Combined Nail/Plate Construct and Autogenous Bone Grafting

In this study, we sought to retrospectively evaluate union and infection rates after treatment of distal femur nonunions using a combined nail/plate construct with autogenous bone grafting obtained from the ipsilateral femur using a reamer irrigator aspirator system. Ten (10) patients treated at a Level I trauma center for nonunion of a femoral fracture using a combined nail/plate construct from 2004 to 2014 were included in the study. Union rate and postoperative infection rates were recorded. Mean interval from index surgery to nonunion repair was 12 months (range 4-36 months). Follow-up at 24 months indicated that the entire cohort of 10 patients achieved clinical union and radiographic union based on radiograph union score in tibias (RUST) criteria. Treatment of distal femur nonunions with a combined nail/plate construct and autogenous bone grafting results in a high rate of union with a low complication rate.

Management of resistant distal femur non-unions with allograft strut and autografts combined with osteosynthesis in a series of 22 patients

INTRODUCTION AND PURPOSE

Challenges to the surgeon in managing cases of resistant non-union of the distal femur include poor bone stock, disuse osteopenia and joint contractures. Procedures varying from simple bone grafting to megaprosthesis revision have been described. We successfully managed such cases using our technique of combining cortical allograft struts to augment the defect in the femoral condyle coupled with autogenous iliac crest bone grafting and locking plate osteosynthesis.

MATERIALS AND METHODS

Between April 2012 and May 2014, 22 patients who presented with resistant nonunions of the distal femur following initial surgery were managed using this technique. Cortical allograft struts were taken from the tissue bank of our institution. All patients were followed up post operatively and their time to union was noted. Functional outcome was calculated using LEFS (Lower extremity functional score). The average follow up of all our patients was 24 months.

RESULTS

All patients went on to achieve complete bony union. The average union time was 6.2 months (5 to 8 months). One patient who was a diabetic had superficial infection post operatively which was treated successfully with IV antibiotics. Average knee flexion was 110 degrees (80 to 130 degrees). The mean LEFS score was 72 (59 to 79).

CONCLUSION

Combing a locking plate fixation with the bone grafting technique of using an allograft strut to support the metaphyseal medial bone defect and autografts gives a good union and a good functional outcome in the management of resistant non-unions of the distal femur by enhancing the biology and providing a good structural support to the distal femur.

Surgical Outcomes of Biologic Fixation for Subtrochanteric Fracture Using Locking Compression Plates

PURPOSE

This study aimed to evaluate the surgical outcomes of biologic plating using locking compression plate-distal femur (LCP-DF) in patients with subtrochanteric fracture of the femur.

MATERIALS AND METHODS

Between January 2010 and December 2013, 28 consecutive patients with subtrochanteric fractures of the femur, treated with biologic fixation using LCP-DF, were enrolled. Preoperative values, including patient age, sex, body mass index, fracture type, type of lung injury, and surgical timing from injury to surgery, were retrospectively evaluated. Radiologic assessments included time to union, coronal alignment, rotational alignment, and complications such as implant breakage and screw breakage. Adverse events, including postoperative fat embolism and adult respiratory distress syndrome, infection during the follow-up period, and walking ability at the last follow-up visit, were assessed.

RESULTS

Union was achieved in 27 patients (96.4%) after a mean duration of 5.4 months (range, 3-14 months). No patients developed fat embolism or adult respiratory distress syndrome during the hospitalization period of this study.

CONCLUSION

Biologic fixation using locking compression plates may represent a safe surgical option which can be utilized in patients with subtrochanteric fracture regardless of injury severity, surgical timing, fracture type, and presence of lung injury.

LCP Versus LISS in the Treatment of Open and Closed Distal Femur Fractures: Does it Make a Difference?

OBJECTIVES

We compared the postoperative complication rates between the less invasive stabilization system (LISS) plating and locking compression plate for open and closed distal femoral fracture fixation for superiority.

DESIGN

Retrospective Review.

SETTING

Multicenter.

PARTICIPANTS

Patients identified through a hospital database who were treated for supracondylar femur fractures using LISS or LCP techniques between January 2005 and July 2010.

INTERVENTION

Medical history, patient demographics, injury characteristics, presence of polytrauma, and surgical characteristics were collected for each patient.

MAIN OUTCOME MEASUREMENTS

χ and logistic regression analysis was performed to compare postoperative infection and nonunion/reoperation regarding both plating techniques.

RESULTS

Of 339 distal femoral fractures, 185 (54.6%) were repaired with a LISS plate and 154 (45.4%) were repaired with a LCP. Multivariate analysis revealed only open fractures to be a risk factor for nonunion (Odds ratio 2.42, P = 0.01) and infection (Odds ratio 3.47, P = 0.02), regardless of device used. No difference was seen between either plate type in infection, plate failure, or nonunion.

CONCLUSIONS

Postoperative infection and nonunion rates are comparable between LISS and LCP for both open and closed distal femoral fracture fixation. As no difference was detected between plates, either may be used to treat distal femur fractures. Nonunion rate was higher than expected based on previous reports.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Fixation of supraglenoid tubercle fractures using distal femoral locking plates in three Warmblood horses

Three horses that were presented with supraglenoid tubercle fractures were treated with open reduction and internal fixation using distal femoral locking plates (DFLP). Placing the DFLP caudal to the scapular spine in order to preserve the suprascapular nerve led to a stable fixation, however, it resulted in infraspinatus muscle atrophy and mild scapulohumeral joint instability (case 1). Placing the DFLP cranial to the scapular spine and under the suprascapular nerve resulted in a stable fixation, however, it resulted in severe atrophy of the supraspinatus and infraspinatus muscles and scapulohumeral joint instability (case 2). Placing the DFLP cranial to the scapular spine and slightly overbending it at the suprascapular nerve passage site resulted in the best outcome (case 3). Only a mild degree of supraspinatus and infraspinatus muscle atrophy was apparent, which resolved quickly and with no effect on scapulohumeral joint stability. In all cases, fixation of supraglenoid tubercle fractures using DFLP in slightly different techniques led to stable fixations with good long-term outcome. One case suffered from a mild incisional infection and plates were removed in two horses. Placement of the DFLP cranial to the scapular spine and slightly overbending it at the suprascapular nerve passage prevented major nerve damage. Further cases investigating the degree of muscle atrophy following the use of the DFLP placed in the above-described technique are justified to improve patient outcome.

Retrograde femoral nailing of periprosthetic fractures around total knee replacements

INTRODUCTION

The incidence of primary total knee replacement (TKR) is increasing with a resultant rise in those patients sustaining distal femoral periprosthetic fractures around TKRs. The management of these fractures pose a significant challenge. The compatibility of retrograde femoral intramedullary (IM) nails with femoral TKR components needs to be considered preoperatively when this complex pathology is addressed. The aim of this study was to update the literature and assess the compatibility of the most commonly used primary TKR prostheses and retrograde femoral IM nails using a Sawbone anatomical model.

METHODS AND MATERIALS

Eight of the most commonly used primary TKR prostheses and four of the most commonly used retrograde femoral IM nails were identified. The femoral components of the TKRs were implanted onto left sided femoral Sawbones using the manufacturer's guides and cutting blocks and positioned appropriately. The retrograde IM nails were inserted using the conventional entry point and a nail was deemed compatible if this was possible through the femoral prosthesis. Details of whether a posterior entry point was required to allow insertion, whether the femoral nail was scratched by the femoral TKR prosthesis on insertion and whether excess force was required to insert the retrograde femoral IM nail were recorded.

RESULTS

The Biomet AGC Cruciate Retaining (CR) and Posterior Stabilised (PS) TKR were the only prostheses that were compatible with all the nails used. The other TKR prostheses were not compatible because of the force required to gain entry, scratching of the retrograde femoral IM nail or because a posterior entry point was required to gain entry through the intercondylar notch.

CONCLUSION

The majority of standard sized retrograde femoral nails are technically feasible for insertion through most femoral TKR components but this study has found that they are not compatible due to excessive force required for insertion, damage to the nail during insertion or the risk of anterior cortex perforation. Further studies are required to update the compatibility table and cadaveric studies would confirm the findings and allow further mechanical testing.

Does MIPO of fractures of the distal femur result in more rotational malalignment than ORIF? A retrospective study

PURPOSE

Intraoperative control of rotational malalignment poses a big challenge for surgeons when using modern MIPO (minimally invasive plate osteosynthesis) techniques. We hypothesized that distal femoral fractures treated with MIPO technique are more often fixed in malrotation than those treated with open reduction internal fixation (ORIF).

METHODS

In this retrospective study, we identified 20 patients who met the inclusion criteria and agreed to take part in the study. In ten patients MIPO was applied, in the other ten ORIF was used. Mean age was 44.8 (19-71 years). Functional status was assessed using clinical scores (Harris Hip Score, WOMAC Hip, KS Score, WOMAC Knee, Kujala Score). Rotational alignment was assessed with magnetic resonance imaging and compared to the opposite leg.

RESULTS

We discovered a significant difference in the mean rotational difference between the MIPO group (14.3°) and the ORIF group (5.2°). Functionally, patients in the ORIF group outperformed patients in the MIPO group in all clinical scoring systems although no one proved to be statistically significant. MIPO technique was associated with significantly more rotational malalignment compared to ORIF in distal femur fracture fixation. However, implant failure and nonunion was more common in the ORIF group, with a revision rate of 3 versus 1 in the ORIF group. Clinical scoring did not significantly different between both groups.

CONCLUSION

Taking into account the undisputable advantages of minimally invasive surgery, improved teaching of methods to avoid malrotation as well as regular postoperative investigations to detect any malrotation should be advocated.

The outcome of Polyax Locked Plating System for fixation distal femoral non-implant related and periprosthetic fractures

The objective of this study was to report on the safety, efficacy and clinical outcomes of the Polyax Locked Plating System (Biomet, Warsaw, IN, USA) in the management of acute (non-implant related and periprosthetic) distal femoral fractures. We retrospectively reviewed 71 patients with 73 distal femoral fractures. Thirty-three of the included fractures occurred around previously placed implants. The average patients' age was 67 years (range 18-98). There were 7 early postoperative complications (9.5%) including one deep surgical site infection, 2 pulmonary embolisms and 4 urinary or respiratory infections. At final follow-up (mean 12, range 9-55 months) all fractures progressed to clinical and radiological union. However, major revision surgery for healing problems was required in 5 cases (6.8%) and minor in 3 cases (4.1%). The average time to healing was 6 (range 3-23) months. Angulation less than 5 degrees in any plane was observed in 66 cases (89.7%), within 5-10 degrees in 5 cases (7.3%) and within 10-15 degrees in 2 cases (2.9%). The mean pre-injury and final follow-up values of Glasgow Outcome Scale were 1.5(1-3) and 1.7(1-3) respectively. Overall 61 patients (83.53%) retained their pre-injury activity status. The Polyax Locked Plating System offers a safe and efficient fixation in distal femoral fractures.

Results of treatment of distal extra: articular femur fractures with locking plates using minimally invasive approach--experience with 25 consecutive geriatric patients

PURPOSE

Fractures involving the femur in older adults are reasonably common. The aim of this study was to evaluate the results of MIPO technique using locking plates in geriatric patients for distal extra-articular femur fractures.

METHODS

About 25 consecutive patients with distal extra-articular femur fractures aged 60 years and above were treated using locking plates and minimally invasive technique. Patients were studied prospectively over a period of 3 years. Parameters studied included patient demographics, fracture type, time taken for the surgery, time to union and any complications.

RESULTS

Mean age of patients was 66.5 years. Nineteen (76%) patients were females. Most of fractures in our study were type 33A2 fractures (64%). Average time to full weight bearing was 14.32 weeks, and fractures united at an average of 16.88 weeks. There were two (8%) patients with superficial infection, two (8%) with implant tenderness. One (4%) patient developed knee stiffness. Five (20%) patients had extension lag of average 5°. One (4%) patient sustained a peri-implant fracture at 2 months. None of the patients developed non-union or delayed union. According to criteria laid by Schatzker's and Lambert, excellent results were achieved in 22 (88%) patients.

CONCLUSIONS

Outcome of minimally invasive fixation of distal extra-articular femur fractures with locking plates in patients of age 60 years and above seems to be good with high union rate despite high prevalence of osteoporosis and comminution.

Extremity War Injuries IX: Reducing Disability Within the Military

Extremity War Injury Symposium IX focused on reducing disability within the military, centering on cartilage defects, amputations, and spinal cord injury. Many areas of upper and lower extremity trauma and disability were discussed, including segmental nerve injuries, upper extremity allotransplantation, and the importance of patient-reported functional outcomes compared with the traditionally reported measures. Strategic planning addressed progression toward clinical solutions by setting clear objectives and goals and outlining pathways to address the "translation gap" that often prevents bridging of basic science to clinical application.

Retrograde locked intramedullary nailing for aseptic supracondylar femoral nonunion following failed locked plating

PURPOSE

To review the outcome of retrograde locked nailing for aseptic supracondylar femoral nonunions following failed locked plating.

METHODS

Records of 20 men and 4 women aged 20 to 57 (mean, 39) years who underwent retrograde locked intramedullary nailing for aseptic supracondylar femoral nonunion following failed locked plating were reviewed. There were 20 closed and 4 open Gustilo type II or IIIA fractures secondary to motor vehicle accidents (n=21) or falls (n=3). Patients had undergone one to 3 operations. The mean time from injury to the present revision surgery was 1.3 years. No patient had a flexion contracture. The locked plate was removed and replaced with a retrograde dynamic locked nail (with or without buttress plate augmentation) followed by bone grafting.

RESULTS

17 men and 4 women were followed up for a mean of 3.4 years. The rest were lost to follow-up. The 21 patients achieved bone union after a mean of 4.3 months. The mean maximal knee flexion improved from 97.1º to 107.6º (p=0.03). Knee function was excellent in one, good in 15, and fair in 5 knees. The fair outcome was due to extension contracture, varus knee deformity, or knee pain. There were 3 malunions with varus deformity of 7º, 8º, and 9º each. No patient had deep infection causing a nonunion. All 21 patients could walk without aids.

CONCLUSION

Retrograde locked intramedullary nailing for aseptic supracondylar femoral nonunions following failed locked plating achieved a high union rate.

Possible predictors for difficult removal of locking plates: A case-control study

INTRODUCTION

Difficult removal of locking plates including less invasive stabilisation systems (LISSs) and locking compression plates (LCPs) sometimes occur. However, investigations of the mechanisms and correlated factors of complicated removal remain scant. This study aims to identify correlated factors for the difficult removal of locking plates and to propose suggestions for decision making regarding implant removal and the prevention of complicated removal.

MATERIALS AND METHODS

In total, 308 consecutive patients who underwent LCP/LISS removal from Sep. 2004 to Nov. 2013 were assessed. Using the Mann-Whitney U test, we analysed the correlation between difficult removal and the duration between open reduction and internal fixation (ORIF) and implant removal as well as the correlation between difficult removal and the patients' age. Using Chi Square test, we assessed the correlations between complicated removal and the size, location, insertion technique and cortical purchase of the locking head screw (LHS). Correlated factors were separately determined in upper and lower extremities. Rates of difficult removal in different fracture locations were evaluated, and postoperative complications were documented.

RESULTS

Of the total 308 patients, thirty-seven had intra-operative difficulties, and six patients experienced postoperative complications. Six out of fifteen patients with peri-elbow fractures and five out of seventeen patients with femur fractures suffered difficult removal, while four out of one hundred patients with malleolar fractures had intra-operative difficulties. Difficulties were experienced with 30 of 338 LCPs, 7 of 32 LISSs, 67 of 1533 small-diameter (≤ 3.5-mm) LHSs, and 12 of 442 large-diameter (≥ 4.5-mm) LHSs. Three LCPs and seventeen small-diameter LHSs were retained. A longer interval between ORIF and removal, younger age and bicortical screws correlated with difficult removal in the upper extremities, and a longer duration before removal, small-diameter LHS and minimally invasive insertion of LHS were predictors in the lower extremities.

CONCLUSIONS

Complications occur with LCP/LISS removal, and it should not be a routine procedure. If removal is indicated, performing surgery as soon as radiographs show fracture healing is recommended. Different considerations should apply when making decisions and removing implants from patients with different fracture sites.

Mono- versus polyaxial locking plates in distal femur fractures - a biomechanical comparison of the Non-Contact-Bridging- (NCB) and the PERILOC-plate

Background

The aim of this cadaveric study was to compare a polyaxial (NCB®, Zimmer) to a fixed-angle monoaxial locking plate (PERILOC®, Smith & Nephew) in comminuted fractures of the distal femur regarding stability of the construct. Up to date there is no published biomechanical data concerning polyaxial plating in cadaveric distal femurs.

Methods

Fourteen formalin fixed femora were scanned by dual-energy x-ray absorptiometry. As fracture model an unstable supracondylar comminuted fracture was simulated. Fractures were pairwise randomly fixed either with a mono- (group A) or a polyaxial (group B) distal femur plate. The samples were tested in a servohydraulic mechanical testing system starting with an axial loading of 200 N following an increase of 200 N in every step with 500 cycles in every sequence up to a maximum of 2 000 N. The end points were implant failure or relevant loss of reduction. Data records included for each specimen time, number of cycles, axial load and axial displacement. Statistical analysis was performed using the exact Wilcoxon signed rank test.

Results

The mean donor age at the time of death was 75 years. The bone mass density (BMD) of the femurs in both groups was comparable and showed no statistically significant differences. Five bones failed before reaching the maximum applied force of 2000 N. Distribution curves of all samples in both groups, showing the plastic deformation in relation to the axial force, showed no statistically significant differences.

Conclusions

Operative stabilization of distal femur fractures can be successfully and equally well achieved using either a monoaxial or a polyaxial locking plate. Polyaxial screw fixation may have advantages if intramedullary implants are present.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2474-15-369) contains supplementary material, which is available to authorized users.

Locked compression plating for peri- and intra-articular fractures around the knee

OBJECTIVE

To evaluate the role of locked compression plates (LCPs) in management of peri- and intra-articular fractures around the knee.

METHODS

Twenty distal femoral and 20 proximal tibial fractures were fixed with LCPs. The types of femoral fractures were A1 (four), A2 (three), A3 (two), C1 (one), C2 (seven) and C3 (three). The types of tibial fractures were A2 (one), A3 (two), B2 (two), C1 (four), C2 (five) and C3 (six). All patients were followed up for up to 18 months (mean, 12 months). Fourteen patients with distal femoral fractures and 19 with proximal tibial fractures underwent surgery using a minimally invasive percutaneous plate osteosynthesis (MIPPO) technique. The others were treated by open reduction. The average time of fixation was 8 days after injury (0-31 days). Knee Society scores were used for clinical and functional assessment.

RESULTS

All fractures, except one of the distal femur and one of the proximal tibia, united. The mean union times for distal femoral and proximal tibial fractures were 15.2 and 14.9 weeks, respectively. One patient with a distal femoral fracture had implant failure. One patient was quadriplegic and did not recover the ability to walk. The average Knee Society scores of the remaining 18 patients were 82.66 (excellent) and 77.77 (functional score, good). There was one case of implant failure and one of screw breakage in distal femoral fractures. One case of nonunion occurred in a proximal tibial fracture.

CONCLUSION

Provided it is applied with proper understanding of biomechanics, LCP is one of the best available options for management of challenging peri- and intra-articular fractures.

Treatment of distal femur fractures in a regional Australian hospital

AIM: To review our outcomes and compare the results of the Less Invasive Stabilization System (LISS) to other implants for distal femur fracture management at a regional Australian hospital.

METHODS: The LISS is a novel implant for the management of distal femur fractures. It is, however, technically demanding and treatment results have not yet been assessed outside tertiary centres. Twenty-seven patients with 28 distal femur fractures who had been managed surgically at the Mackay Base Hospital from January 2004 to December 2010 were retrospectively enrolled and assessed clinically and radiologically. Outcomes were union, pain, Lysholm score, knee range of motion, and complication rates.

RESULTS: Twenty fractures were managed with the LISS and eight fractures were managed with alternative implants. Analysis of the surgical techniques revealed that 11 fractures managed with the LISS were performed according to the recommended principles (LISS-R) and 9 were not (LISS-N). Union occurred in 67.9% of fractures overall: 9/11 (82%) in the LISS-R group vs 5/9 (56%) in the LISS-N group and 5/8 (62.5%) in the alternative implant group. There was no statistically significant difference between pain, Lysholm score, and complication rates between the groups. However, there was a trend towards the LISS-R group having superior outcomes which were clinically significant. There was a statistically significant greater range of median knee flexion in the LISS-R group with compared to the LISS-N group (P = 0.0143) and compared with the alternative implant group (P = 0.0454).

CONCLUSION: The trends towards the benefits of the LISS procedure when correctly applied would suggest that not only should the LISS procedure be performed for distal femur fractures, but the correct principle of insertion is important in improving the patient’s outcome.

Locking Compression Plate in Distal Femoral Intra-Articular Fractures: Our Experience

Background. Intra-articular fractures of distal femur present a huge surgical challenge. The aim of this study is to evaluate functional outcome, fracture healing, and the complications of distal femoral intra-articular fractures using locking compression plates. Material and Methods. We reviewed 46 distal femoral fractures treated with distal femoral locking compression plates between 2009 to 2012. There were 36 men and 10 women with mean age of 35 years (range 20–72). More than half of the patients were of type C3 (AO classification) and had been caused by high energy trauma with associated injuries. Results. 2 patients were lost to follow-up. Of the remaining 44 patients, the mean follow-up period was 25 months (range 18–36). The mean time for radiological union was 12 weeks (range 10–18) except 2 patients which had gone for nonunion. At the latest follow up ROM >120° is noted in 32 patients, 90–120 in 10 patients, and 70–90 in 2 patients. 38 patients (86%) had good/excellent outcome. Conclusion. Use of standard lateral approach for simple intra-articular distal femoral fractures (C1) and transarticular/minimally invasive techniques for complex intra-articular fractures (C2/C3) results in improved exposure of the knee joint and better union rates with low incidence of bone grafting.

Predictive factors of distal femoral fracture nonunion after lateral locked plating: a retrospective multicenter case-control study of 283 fractures

INTRODUCTION

Reported initial success rates after lateral locked plating (LLP) of distal femur fractures have led to more concerning outcomes with reported nonunion rates now ranging from 0 to 21%. Reported factors associated with nonunion include comorbidities such as obesity, age and diabetes. In this study, our goal was to identify patient comorbidities, injury and construct characteristics that are independent predictors of nonunion risk in LLP of distal femur fractures; and to develop a predictive algorithm of nonunion risk, irrespective of institutional criteria for clinical intervention variability.

PATIENTS AND METHODS

A retrospective review of 283 distal femoral fractures in 278 consecutive patients treated with LLP at three Level1 academic trauma centers. Nonunion was liberally defined as need for secondary procedure to manage poor healing based on unrestricted surgeon criteria. Patient demographics (age, gender), comorbidities (obesity, smoking, diabetes, chronic steroid use, dialysis), injury characteristics (AO type, periprosthetic fracture, open fracture, infection), and management factors (institution, reason for intervention, time to intervention, plate length, screw density, and plate material) were obtained for all participants. Multivariable analysis was performed using logistic regression to control for confounding in order to identify independent risk factors for nonunion.

RESULTS

28 of the 283 fractures were treated for nonunion, 13 were referred to us from other institutions. Obesity (BMI>30), open fracture, occurrence of infection, and use of stainless steel plate were significant independent risk factors (P<0.01). A predictive algorithm demonstrates that when none of these variables are present (titanium instead of stainless steel) the risk of nonunion requiring intervention is 4%, but increases to 96% with all factors present. When a stainless plate is used, obesity alone carries a risk of 44% while infection alone a risk of 66%. While Chi-square testing suggested no institutional differences in nonunion rates, the time to intervention for nonunion varied inversely with nonunion rates between institutions, indicating varying trends in management approach.

DISCUSSION

Obesity, open fracture, occurrence of infection, and the use of stainless steel are prognostic risk factors of nonunion in distal femoral fractures treated with LLP independent of differing trends in how surgeons intervene in the management of nonunion.

Mono- versus polyaxial locking plates in distal femur fractures: a prospective randomized multicentre clinical trial

PURPOSE

Treatment of complex fractures of the distal femur utilizing monoaxial locking plates (e.g. Less Invasive Stabilisation System, LISS®, Synthes) is considered to be superior to conventional plating systems. Due to the limitation that the thread forces the screw into pre-determined positions, modifications have been made to allow screw positioning within a range of 30° (Non Contact Bridging, NCB®-DF, Zimmer). For the first time, this multicenter prospective randomized clinical trial (RCT) investigates the outcome of LISS® vs. NCB®-DF treatment following complex fractures of the distal femur.

METHODS

Since June 2008, 27 patients with a fracture of the distal femur (AO ASIF 33-A-C and periprosthetic fractures) were enrolled in this study by four university trauma centres in southern Germany. Clinical (e.g. range of motion, Oxford knee score, Tegner score) and radiological (e.g. axis deviation, secondary loss of realignment) follow-ups were conducted one and six weeks, as well as three, six, and 12 months after the operation.

RESULTS

This study comprises data of 27 patients (8 male, 19 female; 15 NCB®-DF, 12 LISS®). Polyaxial osteosynthesis using the NCB® system tended to result in better functional knee scores and a higher range of motion. Interestingly, fracture union tended to be more rapid using the polyaxial plating system.

CONCLUSIONS

We present the analysis of a multicenter prospective RCT to compare the monoaxial LISS® vs. the polyaxial NCB®-DF treatment following complex fractures of the distal femur. NCB®-DF treatment tended to result in better functional and radiological outcomes than LISS® treatment.

LEVEL OF EVIDENCE

Level I.

Clinical outcomes of locked plating of distal femoral fractures in a retrospective cohort

Purpose

Locked plating (LP) of distal femoral fractures has become very popular. Despite technique suggestions from anecdotal and some early reports, knowledge about risk factors for failure, nonunion (NU), and revision is limited. The purpose of this study was to analyze the complications and clinical outcomes of LP treatment for distal femoral fractures.

Materials and methods

From two trauma centers, 243 consecutive surgically treated distal femoral fractures (AO/OTA 33) were retrospectively identified. Of these, 111 fractures in 106 patients (53.8% female) underwent locked plate fixation. They had an average age of 54 years (range 18 to 95 years): 34.2% were obese, 18.9% were smokers, and 18.9% were diabetic. Open fractures were present in 40.5% with 79.5% Gustilo type III. Fixation constructs for plate length, working length, and screw concentration were delineated. Nonunion and/or infection, and implant failure were used as outcome complication variables. Outcome was based on surgical method and addressed according to Pritchett for reduction, range of motion, and pain.

Results

Eighty-three (74.8%) of the fractures healed after the index procedure. Twenty (18.0%) of the patients developed a NU. Four of 20 (20%) resulted in a recalcitrant NU. Length of comminution did not correlate to NU (p = 0.180). Closed injuries had a higher tendency to heal after the index procedure than open injuries (p = 0.057). Closed and minimally open (Gustilo/Anderson types I and II) fractures healed at a significantly higher rate after the index procedure compared to type III open fractures (80.0% versus 61.3%, p = 0.041). Eleven fractures (9.9%) developed hardware failure. Fewer nonunions were found in the submuscular group (10.7%) compared to open reduction (32.0%) (p = 0.023). Fractures above total knee arthroplasties had a significantly greater rate of failed hardware (p = 0.040) and worse clinical outcome according to Pritchett (p = 0.040). Loss of fixation was related to pain (F = 3.19, p = 0.046) and a tendency to worse outcome (F = 2.43, p = 0.071). No relationship was found between nonunion and working length.

Conclusion

Despite modern fixation techniques, distal femoral fractures often result in persistent disability and worse clinical outcomes. Soft tissue management seems to be important. Submuscular plate insertion reduced the nonunion rate. Preexisting total knee arthroplasty increased the risk of hardware failure. Further studies determining factors that improve outcome are warranted.

A biomechanical comparison between locked 3.5-mm plates and 4.5-mm plates for the treatment of simple bicondylar tibial plateau fractures: is bigger necessarily better?

Background

Evolution of periarticular implant technology has led to stiffer, more stable fixation constructs. However, as plate options increase, comparisons between different sized constructs have not been performed. The purpose of this study is to biomechanically assess any significant differences between 3.5- and 4.5-mm locked tibial plateau plates in a simple bicondylar fracture model.

Materials and methods

A total of 24 synthetic composite bone models (12 Schatzker V and 12 Schatzker VI) specimens were tested. In each group, six specimens were fixed with a 3.5-mm locked proximal tibia plate and six specimens were fixed with a 4.5-mm locking plate. Testing measures included axial ramp loading to 500 N, cyclic loading to 10,000 cycles and axial load to failure.

Results

In the Schatzker V comparison model, there were no significant differences in inferior displacement or plastic deformation after 10, 100, 1,000 and 10,000 cycles. In regards to axial load, the 4.5-mm plate exhibited a significantly higher load to failure (P = 0.05). In the Schatzker VI comparison model, there were significant differences in inferior displacement or elastic deformation after 10, 100, 1,000, and 10,000 cycles. In regards to axial load, the 4.5-mm plate again exhibited a higher load to failure, but this was not statistically significant (P = 0.21).

Conclusions

In the advent of technological advancement, periarticular locking plate technology has offered an invaluable option in treating bicondylar tibial plateau fractures. Comparing the biomechanical properties of 3.5- and 4.5-mm locking plates yielded no significant differences in cyclic loading, even in regards to elastic and plastic deformation. Not surprisingly, the 4.5-mm plate was more robust in axial load to failure, but only in the Schatzker V model. In our testing construct, overall, without significant differences, the smaller, lower-profile 3.5-mm plate seems to be a biomechanically sound option in the reconstruction of bicondylar plateau fractures.

Clinical outcomes of distal femoral fractures in the geriatric population using locking plates with a minimally invasive approach

BACKGROUND

Fractures of the distal femur comprise 4% to 6% of all femoral fractures. Elderly patients are predisposed to low-energy fractures due to osteoporosis. Treatment of these fractures in the elderly group remains a challenge. Our hypothesis is that locking plates inserted with minimally invasive plate osteosynthesis (MIPO) techniques will produce better results compared to those inserted by open technique. The objective of this study is to evaluate the clinical outcomes of MIPO technique using locking plates in the elderly patients.

MATERIALS AND METHODS

A total of 24 elderly patients (mean age 73 years) with distal femur fractures treated using the MIPO technique (2007-2010) were reviewed retrospectively. Parameters analyzed included classification of fracture, time to fracture union, knee range of motion, functional knee score (Knee Society Score-Functional) at 6 months, and other significant complications. One patient was lost to follow-up.

RESULTS

In all, 88% of the fractures were extraarticular. The mean time to union was 13.48 (range: 8-28) weeks. Mean range of motion achieved at 6 months and beyond was 100° ranging from 0 to 30 (extension) to 90 to 140 (flexion). Functional knee scores at 6 months from fixation were satisfactory (mean score 88.8). There were no cases of implant failure, nonunion, and infection. In all, 6 (25%) patients developed deep vein thrombosis (DVT) in the early postoperative period, all of which were below the level of the knee joint.

CONCLUSION

Locking plates inserted using MIPO techniques in elderly patients with distal femur fractures appear to be promising based on clinical outcome measurements. However, there was a high incidence of DVT noted.

Intramedullary nailing versus locked plate for treating supracondylar periprosthetic femur fractures

The objective of this study was to compare retrograde intramedullary femoral nailing with supracondylar locked screw-plate fixation for the treatment of periprosthetic femur fractures following total knee arthroplasty. Time to union and full weight bearing were the primary study outcomes, with perioperative blood loss, need for transfusion, need for revision surgery, and infection being the secondary outcomes. A retrospective review of 63 patients who sustained Rorabeck Type II periprosthetic femoral fractures was undertaken. Patients were pooled from 3 academic institutions between 2001 and 2009. Patients eligible for the study were identified from the electronic medical record using an IDX query of International Classification of Diseases 9 and Current Procedural Terminology codes for fixation of femur fracture with intramedullary implant or plate and screws. In the series, 35 patients were treated with intramedullary femoral nailing and 28 with a locked screw-plate. The 2 groups were compared for radiographic union at 6, 12, 24, and 36 weeks. At 36 weeks, radiographic union was significantly greater in the locked screw-plate group. Time to full weight bearing was not significantly different. A greater perioperative transfusion rate was observed in the locking plate group, but it also had an overall lower rate of reoperation, for any reason, compared with the intramedullary femoral nailing group. The results support the use of a laterally based locked plate in the treatment of Rorabeck type II distal femur periprosthetic fractures.

A review of periprosthetic femoral fractures associated with total hip arthroplasty

Periprosthetic fractures of the femur in association with total hip arthroplasty are increasingly common and often difficult to treat. Patients with periprosthetic fractures are typically elderly and frail and have osteoporosis. No clear consensus exists regarding the optimal management strategy because there is limited high-quality research. The Vancouver classification facilitates treatment decisions. In the presence of a stable prosthesis (type-B1 and -C fractures), most authors recommend surgical stabilization of the fracture with plates, strut grafts, or a combination thereof. In up to 20% of apparent Vancouver type-B1 fractures, the femoral stem is loose, which may explain the high failure rates associated with open reduction and internal fixation. Some authors recommend routine opening and dislocation of the hip to perform an intraoperative stem stability test to rule out a loose component. Advances in plating techniques and technology are improving the outcomes for these fractures. For fractures around a loose femoral prosthesis (types B2 and 3), revision using an extensively porous-coated uncemented long stem, with or without additional fracture fixation, appears to offer the most reliable outcome. Cement-in-cement revision using a long-stem prosthesis is feasible in elderly patients with a well-fixed cement mantle. It is essential to treat the osteoporosis to help fracture healing and to prevent further fractures. We provide an overview of the causes, classification, and management of periprosthetic femoral fractures around a total hip arthroplasty based on the current best available evidence.

Repeat LISS treatment for femoral shaft fractures due to hardware failure: a retrospective analysis of eleven cases

OBJECTIVE

To evaluate the effectiveness of a replating technique having a less-invasive stabilization system (LISS) for femoral shaft fractures due to LISS failure in adults.

PATIENTS AND METHODS

There were 11 patients with hardware failure of LISS for femoral shaft fractures, on an average of 50 days after the primary operation. The failed implants were removed, and the fractures were replated with a LISS following the rationale of biological osteosynthesis. Radiological fracture union and incidence of postoperative complications were employed to evaluate the effectiveness of this replating technique for femoral shaft fractures.

RESULTS

Operative duration including removing failed hardware and replating fractures averaged 81.5 min, with an average blood loss of 330 ml. Patients had an average follow-up of 25.7 months. Radiological evaluation indicated that fracture union occurred in an average of 4.4 months in all patients. The length and alignment of the affected limb were satisfactory, and hardware failure did not recur.

CONCLUSION

The replating technique with LISS for femoral shaft fractures due to hardware failure of LISS can obtain satisfactory results when the appropriate rationale of biological osteosynthesis and functional exercise is followed.