EPR-detectable redox centers of the periplasmic hydrogenase from Desulfovibrio vulgaris

Properties of the iron-sulfur cluster electron transfer relay in an [FeFe]-hydrogenase that is tuned for H2 oxidation catalysis

[FeFe]-hydrogenases catalyze the reversible oxidation of H2 from electrons and protons at an organometallic active site cofactor named the H-cluster. In addition to the H-cluster, most [FeFe]-hydrogenases possess accessory FeS cluster (F-cluster) relays that function in mediating electron transfer with catalysis. There is significant variation in the structural properties of F-cluster relays among the [FeFe]-hydrogenases; however, it is unknown how this variation relates to the electronic and thermodynamic properties, and thus the electron transfer properties, of enzymes. Clostridium pasteurianum [FeFe]-hydrogenase II (CpII) exhibits a large catalytic bias for H2 oxidation (compared to H2 production), making it a notable system for examining if F-cluster properties contribute to the overall function and efficiency of the enzyme. By applying a combination of multifrequency and potentiometric electron paramagnetic resonance, we resolved two electron paramagnetic resonance signals with distinct power- and temperature-dependent properties at g = 2.058 1.931 1.891 (F2.058) and g = 2.061 1.920 1.887 (F2.061), with assigned midpoint potentials of -140 ± 18 mV and -406 ± 12 mV versus normal hydrogen electrode, respectively. Spectral analysis revealed features consistent with spin-spin coupling between the two [4Fe-4S] F-clusters, and possible functional models are discussed that account for the contribution of coupling to the electron transfer landscape. The results signify the interplay of electronic coupling and free energy properties and parameters of the FeS clusters to the electron transfer mechanism through the relay and provide new insight as to how relays functionally complement the catalytic directionality of active sites to achieve highly efficient catalysis.

Characterization of ferredoxins involved in electron transfer pathways for nitrogen fixation implicates differences in electronic structure in tuning 2[4Fe4S] Fd activity

Ferredoxins (Fds) are small proteins which shuttle electrons to pathways like biological nitrogen fixation. Physical properties tune the reactivity of Fds with different pathways, but knowledge on how these properties can be manipulated to engineer new electron transfer pathways is lacking. Recently, we showed that an evolved strain of Rhodopseudomonas palustris uses a new electron transfer pathway for nitrogen fixation. This pathway involves a variant of the primary Fd of nitrogen fixation in R. palustris, Fer1, in which threonine at position 11 is substituted for isoleucine (Fer1T11I). To understand why this substitution in Fer1 enables more efficient electron transfer, we used in vivo and in vitro methods to characterize Fer1 and Fer1T11I. Electrochemical characterization revealed both Fer1 and Fer1T11I have similar redox transitions (-480 mV and - 550 mV), indicating the reduction potential was unaffected despite the proximity of T11 to an iron‑sulfur (FeS) cluster of Fer1. Additionally, disruption of hydrogen bonding around an FeS cluster in Fer1 by substituting threonine with alanine (T11A) or valine (T11V) did not increase nitrogenase activity, indicating that disruption of hydrogen bonding does not explain the difference in activity observed for Fer1T11I. Electron paramagnetic resonance spectroscopy studies revealed key differences in the electronic structure of Fer1 and Fer1T11I, which indicate changes to the high spin states and/or spin-spin coupling between the FeS clusters of Fer1. Our data implicates these electronic structure differences in facilitating electron flow and sets a foundation for further investigations to understand the connection between these properties and intermolecular electron transfer.

Structural and biophysical properties of a [4Fe4S] ferredoxin-like protein from Synechocystis sp. PCC 6803 with a unique two domain structure

Electron carrier proteins (ECPs), binding iron-sulfur clusters, are vital components within the intricate network of metabolic and photosynthetic reactions. They play a crucial role in the distribution of reducing equivalents. In Synechocystis sp. PCC 6803, the ECP network includes at least nine ferredoxins. Previous research, including global expression analyses and protein binding studies, has offered initial insights into the functional roles of individual ferredoxins within this network. This study primarily focuses on Ferredoxin 9 (slr2059). Through sequence analysis and computational modeling, Ferredoxin 9 emerges as a unique ECP with a distinctive two-domain architecture. It consists of a C-terminal iron‑sulfur binding domain and an N-terminal domain with homology to Nil-domain proteins, connected by a structurally rigid 4-amino acid linker. Notably, in contrast to canonical [2Fe2S] ferredoxins exemplified by PetF (ssl0020), which feature highly acidic surfaces facilitating electron transfer with photosystem I reaction centers, models of Ferredoxin 9 reveal a more neutral to basic protein surface. Using a combination of electron paramagnetic resonance spectroscopy and square-wave voltammetry on heterologously produced Ferredoxin 9, this study demonstrates that the protein coordinates 2×[4Fe4S]2+/1+ redox-active and magnetically interacting clusters, with measured redox potentials of -420 ± 9 mV and - 516 ± 10 mV vs SHE. A more in-depth analysis of Fdx9's unique structure and protein sequence suggests that this type of Nil-2[4Fe4S] multi-domain ferredoxin is well conserved in cyanobacteria, bearing structural similarities to proteins involved in homocysteine synthesis in methanogens.

Selenium-More than Just a Fortuitous Sulfur Substitute in Redox Biology

Living organisms use selenium mainly in the form of selenocysteine in the active site of oxidoreductases. Here, selenium's unique chemistry is believed to modulate the reaction mechanism and enhance the catalytic efficiency of specific enzymes in ways not achievable with a sulfur-containing cysteine. However, despite the fact that selenium/sulfur have different physicochemical properties, several selenoproteins have fully functional cysteine-containing homologues and some organisms do not use selenocysteine at all. In this review, selected selenocysteine-containing proteins will be discussed to showcase both situations: (i) selenium as an obligatory element for the protein's physiological function, and (ii) selenium presenting no clear advantage over sulfur (functional proteins with either selenium or sulfur). Selenium's physiological roles in antioxidant defence (to maintain cellular redox status/hinder oxidative stress), hormone metabolism, DNA synthesis, and repair (maintain genetic stability) will be also highlighted, as well as selenium's role in human health. Formate dehydrogenases, hydrogenases, glutathione peroxidases, thioredoxin reductases, and iodothyronine deiodinases will be herein featured.

Binding of exogenous cyanide reveals new active-site states in [FeFe] hydrogenases

[FeFe] hydrogenases are highly efficient metalloenyzmes for hydrogen conversion. Their active site cofactor (the H-cluster) is composed of a canonical [4Fe-4S] cluster ([4Fe-4S]_H) linked to a unique organometallic di-iron subcluster ([2Fe]_H). In [2Fe]_H the two Fe ions are coordinated by a bridging 2-azapropane-1,3-dithiolate (ADT) ligand, three CO and two CN^- ligands, leaving an open coordination site on one Fe where substrates (H₂ and H⁺) as well as inhibitors (e.g. O₂, CO, H₂S) may bind. Here, we investigate two new active site states that accumulate in [FeFe] hydrogenase variants where the cysteine (Cys) in the proton transfer pathway is mutated to alanine (Ala). Our experimental data, including atomic resolution crystal structures and supported by calculations, suggest that in these two states a third CN^- ligand is bound to the apical position of [2Fe]_H. These states can be generated both by "cannibalization" of CN^- from damaged [2Fe]_H subclusters as well as by addition of exogenous CN^-. This is the first detailed spectroscopic and computational characterisation of the interaction of exogenous CN^- with [FeFe] hydrogenases. Similar CN^--bound states can also be generated in wild-type hydrogenases, but do not form as readily as with the Cys to Ala variants. These results highlight how the interaction between the first amino acid in the proton transfer pathway and the active site tunes ligand binding to the open coordination site and affects the electronic structure of the H-cluster.

A personal account on 25 years of scientific literature on [FeFe]-hydrogenase

[FeFe]-hydrogenases are gas-processing metalloenzymes that catalyze H₂ oxidation and proton reduction (H₂ release) in microorganisms. Their high turnover frequencies and lack of electrical overpotential in the hydrogen conversion reaction has inspired generations of biologists, chemists, and physicists to explore the inner workings of [FeFe]-hydrogenase. Here, we revisit 25 years of scientific literature on [FeFe]-hydrogenase and propose a personal account on 'must-read' research papers and review article that will allow interested scientists to follow the recent discussions on catalytic mechanism, O₂ sensitivity, and the in vivo synthesis of the active site cofactor with its biologically uncommon ligands carbon monoxide and cyanide. Focused on-but not restricted to-structural biology and molecular biophysics, we highlight future directions that may inspire young investigators to pursue a career in the exciting and competitive field of [FeFe]-hydrogenase research.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H2, N2, CO2, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N2, CO2, and CO and the production of H2 require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N2 fixation by nitrogenase and H2 production by hydrogenase as well as CO2 and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

Stability of the H-cluster under whole-cell conditions-formation of an Htrans-like state and its reactivity towards oxygen

Hydrogenases are metalloenzymes that catalyze the reversible oxidation of molecular hydrogen into protons and electrons. For this purpose, [FeFe]-hydrogenases utilize a hexanuclear iron cofactor, the H-cluster. This biologically unique cofactor provides the enzyme with outstanding catalytic activities, but it is also highly oxygen sensitive. Under in vitro conditions, oxygen stable forms of the H-cluster denoted Htrans and Hinact can be generated via treatment with sulfide under oxidizing conditions. Herein, we show that an Htrans-like species forms spontaneously under intracellular conditions on a time scale of hours, concurrent with the cells ceasing H2 production. Addition of cysteine or sulfide during the maturation promotes the formation of this H-cluster state. Moreover, it is found that formation of the observed Htrans-like species is influenced by both steric factors and proton transfer, underscoring the importance of outer coordination sphere effects on H-cluster reactivity.

Hydrogenases and H2 metabolism in sulfate-reducing bacteria of the Desulfovibrio genus

Hydrogen metabolism plays a central role in sulfate-reducing bacteria of the Desulfovibrio genus and is based on hydrogenases that catalyze the reversible conversion of protons into dihydrogen. These metabolically versatile microorganisms possess a complex hydrogenase system composed of several enzymes of both [FeFe]- and [NiFe]-type that can vary considerably from one Desulfovibrio species to another. This review covers the molecular and physiological aspects of hydrogenases and H₂ metabolism in Desulfovibrio but focuses particularly on our model bacterium Desulfovibrio fructosovorans. The search of hydrogenase genes in more than 30 sequenced genomes provides an overview of the distribution of these enzymes in Desulfovibrio. Our discussion will consider the significance of the involvement of electron-bifurcation in H₂ metabolism.

Sulfide Protects [FeFe] Hydrogenases From O2

[FeFe] hydrogenases catalyze proton reduction and hydrogen oxidation with high rates and efficiency under physiological conditions, but are highly oxygen sensitive. The [FeFe] hydrogenase from Desulfovibrio desulfuricans ( DdHydAB) can be purified under air in an oxygen stable inactive state H_ox^air. The formation of the H_ox^air state in vitro allows the handling of hydrogenases in air, making their implementation in biotechnological applications more feasible. Here, we report a simple and robust protocol for the formation of the H_ox^air state in DdHydAB and the [FeFe] hydrogenase from Chlamydomonas reinhardtii, which is based on high potential inactivation in the presence of sulfide.

Density Functional Theory Calculation of Bonding and Charge Parameters for Molecular Dynamics Studies on [FeFe] Hydrogenases

We have developed and tested molecular mechanics parameters for [FeS] clusters found in known [FeFe] hydrogenases. Bond stretching, angle bending, dihedral and improper torsion parameters for models of the oxidized and reduced catalytic H-cluster, [4Fe4S](+,2+)Cys4, [4Fe4S](+,2+)Cys3His, and [2Fe2S](+,2+)Cys4, were calculated solely from Kohn-Sham density functional theory and Natural Population Analysis. Circumsphere analysis of the cubane clusters in the energy-minimized structure of the full Clostridium pasteurianum hydrogenase I showed the resulting metallocluster structures to be similar to known cubane structures. All clusters were additionally stable in molecular dynamics simulations over the course of 1.0 ns in the fully oxidized and fully reduced enzyme models. Normal modes calculated by quasiharmonic analysis from the dynamics data show unexpected couplings among internal coordinate motions, which may reflect the effects of the protein structure on metallocluster dynamics.

[FeFe]- and [NiFe]-hydrogenase diversity, mechanism, and maturation

The [FeFe]- and [NiFe]-hydrogenases catalyze the formal interconversion between hydrogen and protons and electrons, possess characteristic non-protein ligands at their catalytic sites and thus share common mechanistic features. Despite the similarities between these two types of hydrogenases, they clearly have distinct evolutionary origins and likely emerged from different selective pressures. [FeFe]-hydrogenases are widely distributed in fermentative anaerobic microorganisms and likely evolved under selective pressure to couple hydrogen production to the recycling of electron carriers that accumulate during anaerobic metabolism. In contrast, many [NiFe]-hydrogenases catalyze hydrogen oxidation as part of energy metabolism and were likely key enzymes in early life and arguably represent the predecessors of modern respiratory metabolism. Although the reversible combination of protons and electrons to generate hydrogen gas is the simplest of chemical reactions, the [FeFe]- and [NiFe]-hydrogenases have distinct mechanisms and differ in the fundamental chemistry associated with proton transfer and control of electron flow that also help to define catalytic bias. A unifying feature of these enzymes is that hydrogen activation itself has been restricted to one solution involving diatomic ligands (carbon monoxide and cyanide) bound to an Fe ion. On the other hand, and quite remarkably, the biosynthetic mechanisms to produce these ligands are exclusive to each type of enzyme. Furthermore, these mechanisms represent two independent solutions to the formation of complex bioinorganic active sites for catalyzing the simplest of chemical reactions, reversible hydrogen oxidation. As such, the [FeFe]- and [NiFe]-hydrogenases are arguably the most profound case of convergent evolution. This article is part of a Special Issue entitled: Fe/S proteins: Analysis, structure, function, biogenesis and diseases.

Investigations on the role of proton-coupled electron transfer in hydrogen activation by [FeFe]-hydrogenase

Proton-coupled electron transfer (PCET) is a fundamental process at the core of oxidation-reduction reactions for energy conversion. The [FeFe]-hydrogenases catalyze the reversible activation of molecular H2 through a unique metallocofactor, the H-cluster, which is finely tuned by the surrounding protein environment to undergo fast PCET transitions. The correlation of electronic and structural transitions at the H-cluster with proton-transfer (PT) steps has not been well-resolved experimentally. Here, we explore how modification of the conserved PT network via a Cys → Ser substitution at position 169 proximal to the H-cluster of Chlamydomonas reinhardtii [FeFe]-hydrogenase (CrHydA1) affects the H-cluster using electron paramagnetic resonance (EPR) and Fourier transform infrared (FTIR) spectroscopy. Despite a substantial decrease in catalytic activity, the EPR and FTIR spectra reveal different H-cluster catalytic states under reducing and oxidizing conditions. Under H2 or sodium dithionite reductive treatments, the EPR spectra show signals that are consistent with a reduced [4Fe-4S]H(+) subcluster. The FTIR spectra showed upshifts of νCO modes to energies that are consistent with an increase in oxidation state of the [2Fe]H subcluster, which was corroborated by DFT analysis. In contrast to the case for wild-type CrHydA1, spectra associated with Hred and Hsred states are less populated in the Cys → Ser variant, demonstrating that the exchange of -SH with -OH alters how the H-cluster equilibrates among different reduced states of the catalytic cycle under steady-state conditions.

Molecular basis of [FeFe]-hydrogenase function: an insight into the complex interplay between protein and catalytic cofactor

The precise electrochemical features of metal cofactors that convey the functions of redox enzymes are essentially determined by the specific interaction pattern between cofactor and enclosing protein environment. However, while biophysical techniques allow a detailed understanding of the features characterizing the cofactor itself, knowledge about the contribution of the protein part is much harder to obtain. [FeFe]-hydrogenases are an interesting class of enzymes that catalyze both, H2 oxidation and the reduction of protons to molecular hydrogen with significant efficiency. The active site of these proteins consists of an unusual prosthetic group (H-cluster) with six iron and six sulfur atoms. While H-cluster architecture and catalytic states during the different steps of H2 turnover have been thoroughly investigated during the last 20 years, possible functional contributions from the polypeptide framework were only assumed according to the level of conservancy and X-ray structure analyses. Due to the recent development of simpler and more efficient expression systems the role of single amino acids can now be experimentally investigated. This article summarizes, compares and categorizes the results of recent investigations based on site directed and random mutagenesis according to their informative value about structure function relationships in [FeFe]-hydrogenases. This article is part of a Special Issue entitled: Metals in Bioenergetics and Biomimetics Systems.

Importance of the protein framework for catalytic activity of [FeFe]-hydrogenases

The active center (H-cluster) of [FeFe]-hydrogenases is embedded into a hydrophobic pocket within the protein. We analyzed several amino acids, located in the vicinity of this niche, by site-directed mutagenesis of the [FeFe]-hydrogenases from Clostridium pasteurianum (CpI) and Chlamydomonas reinhardtii (CrHydA1). These amino acids are highly conserved and predicted to be involved in H-cluster coordination. Characterization of two hydrogenase variants confirmed this hypothesis. The exchange of residues CrHydA1Met(415) and CrHydA1Lys(228) resulted in inactive proteins, which, according to EPR and FTIR analyses, contain no intact H-cluster. However, [FeFe]-hydrogenases in which CpIMet(353) (CrHydA1Met(223)) and CpICys(299) (CrHydA1Cys(169)) were exchanged to leucine and serine, respectively, showed a structurally intact H-cluster with catalytic activity either absent (CpIC299S) or strongly diminished (CpIM353L). In the case of CrHydA1C169S, the H-cluster was trapped in an inactive state exhibiting g values and vibrational frequencies that resembled the H(trans) state of DdH from Desulfovibrio desulfuricans. This cysteine residue, interacting with the bridge head nitrogen of the di(methyl)amine ligand, seems therefore to represent an essential contribution of the immediate protein environment to the reaction mechanism. Exchanging methionine CpIM(353) (CrHydA1M(223)) to leucine led to a strong decrease in turnover without affecting the K(m) value of the electron donor. We suggest that this methionine constitutes a "fine-tuning" element of hydrogenase activity.

Residue Mutations in [Fe-Fe]-hydrogenase Impedes O(2) Binding: A QM/MM Investigation

[Fe-Fe]-hydrogenases are enzymes that reversibly catalyze the reaction of protons and electrons to molecular hydrogen, which occurs in anaerobic media. In living systems, [Fe-Fe]-hydrogenases are mostly used for H(2) production. The [Fe-Fe]-hydrogenase H-cluster is the active site, which contains two iron atoms. The latest theoretical investigations1,2 advocate that the structure of di-iron air inhibited species are either Fe(p) (II)-Fe(d) (II)-O-H(-), or Fe(p) (II)-Fe(d) (II)-O-O-H, thus O(2) has to be prevented from binding to Fe(d) in all di-iron subcluster oxidation states in order to retain a catalytically active enzyme. By performing residue mutations on [Fe-Fe]-hydrogenases, we were able to weaken O(2) binding to distal iron (Fe(d)) of Desulfovibrio desulfuricans hydrogenase (DdH). Individual residue deletions were carried out in the 8 A apoenzyme layer radial outward from Fe(d) to determine what residue substitutions should be made to weaken O(2) binding. Residue deletions and substitutions were performed for three di-iron subcluster oxidation states, Fe(p) (II)-Fe(d) (II), Fe(p) (II)-Fe(d) (I), and Fe(p) (I)-Fe(d) (I) of [Fe-Fe]-hydrogenase. Two deletions (DeltaThr(152) and DeltaSer(202)) were found most effective in weakening O(2) binding to Fe(d) in Fe(p) (II)-Fe(d) (I) hydrogenase (DeltaG(QM/MM) = +5.4 kcal/mol). An increase in Gibbs' energy (+2.2 kcal/mol and +4.4 kcal/mol) has also been found for Fe(p) (II)-Fe(d) (II), and Fe(p) (I)-Fe(d) (I) hydrogenase respectively. pi-backdonation considerations for frontier molecular orbital and geometrical analysis corroborate the Gibbs's energy results.

(14)N HYSCORE investigation of the H-cluster of [FeFe] hydrogenase: evidence for a nitrogen in the dithiol bridge

Hydrogenases are enzymes catalyzing the reversible heterolytic splitting of molecular hydrogen. Despite extensive investigations of this class of enzymes its catalytic mechanism is not yet well understood. In this paper spectroscopic investigations of the active site of [FeFe] hydrogenase are presented. The so-called H-cluster consists of a bi-nuclear catalytically active subcluster connected to a [4Fe4S] ferredoxin-like unit via a Cys-thiol bridge. An important feature of the H-cluster is that both irons in the bi-nuclear subcluster are coordinated by CN and CO ligands. The bi-nuclear site also carries a dithiol bridge, whose central atom has not yet been identified. Nitrogen and oxygen are the most probable candidates from a mechanistic point of view. Here we present a study of the (14)N nuclear quadrupole and hyperfine interactions of the active oxidized state of the H-cluster using advanced EPR methods. In total three (14)N nuclei with quadrupole couplings of 0.95 MHz, 0.35 MHz and 1.23 MHz were detected using hyperfine sublevel correlation spectroscopy (HYSCORE). The assignment of the signals is based on their (14)N quadrupole couplings in combination with DFT calculations. One signal is assigned to the CN ligand of the distal iron, one to a Lys side chain nitrogen and one to the putative nitrogen of the dithiol bridge. Hence, these results provide the first experimental evidence for a di-(thiomethyl)amine ligand (-S-CH(2)-NH-CH(2)-S-) in the bi-nuclear subcluster. This finding is important for understanding the mechanism of [FeFe] hydrogenases, since the nitrogen is likely to act as an internal base facilitating the heterolytic splitting/formation of H(2).

Inactivation of [Fe-Fe]-Hydrogenase by O(2). Thermodynamics and Frontier Molecular Orbitals Analyses

The oxidation of H-cluster in gas phase, and in aqueous enzyme phase, has been investigated by means of quantum mechanics (QM) and combined quantum mechanics-molecular mechanics (QM/MM). Several potential reaction pathways (in the above mentioned chemical environments) have been studied, wherein only the aqueous enzyme phase has been found to lead to an inhibited hydroxylated cluster. Specifically, the inhibitory process occurs at the distal iron (Fe(d)) of the catalytic H-cluster (which is also the atom involved in H(2) synthesis). The processes involved in the H-cluster oxidative pathways are O(2) binding, e(-) transfer, protonation, and H(2)O removal.We found that oxygen binding is non-spontaneous in gas phase, and spontaneous for aqueous enzyme phase where both Fe atoms have oxidation state II; however, it is spontaneous for the partially oxidized and reduced clusters in both phases. Hence, in the protein environment the hydroxylated H-cluster is obtained by means of completely exergonic reaction pathway starting with proton transfer.A unifying endeavor has been carried out for the purpose of understanding the thermodynamic results vis-à-vis several other performed electronic structural methods, such as frontier molecular orbitals (FMO), natural bond orbital partial charges (NBO), and H-cluster geometrical analysis. An interesting result of the FMO examination (for gas phase) is that an e(-) is transferred to LUMO(alpha) rather than to SOMO(beta), which is unexpected because SOMO(beta) usually resides in a lower energy rather than LUMO(alpha) for open-shell clusters.

Computational Studies of Bioorganometallic Enzymes and Cofactors

Because of their complex geometric and electronic structures, the active sites and cofactors of bioorganometallic enzymes, which are characterized by their metal–carbon bonds, pose a major challenge for computational chemists. However, recent progress in computer technology and theoretical chemistry, along with insights gained from mechanistic, spectroscopic, and X-ray crystallographic studies, have established an excellent foundation for the successful completion of computational studies aimed at elucidating the electronic structures and catalytic cycles of these species. This chapter briefly reviews the most popular computational approaches employed in theoretical studies of bioorganometallic species and summarizes important information obtained from computational studies of (i) the enzymatic formation and cleavage of the Co–C bond of coenzyme B12; (ii) the catalytic cycle of methyl-coenzyme M reductase and its nickel-containing cofactor F430; (iii) the polynuclear active-site clusters of the bifunctional enzyme carbon monoxide dehydrogenase/acetyl-coenzyme A synthase; and (iv) the magnetic properties of the active-site cluster of Fe-only hydrogenases.

Carbon Monoxide and Cyanide Ligands in the Active Site of [FeFe]-Hydrogenases

The [FeFe]-hydrogenases, although share common features when compared to other metal containing hydrogenases, clearly have independent evolutionary origins. Examples of [FeFe]-hydrogenases have been characterized in detail by biochemical and spectroscopic approaches and the high resolution structures of two examples have been determined. The active site H-cluster is a complex bridged metal assembly in which a [4Fe-4S] cubane is bridged to a 2Fe subcluster with unique non-protein ligands including carbon monoxide, cyanide, and a five carbon dithiolate. Carbon monoxide and cyanide ligands as a component of a native active metal center is a property unique to the metal containing hydrogenases and there has been considerable attention to the characterization of the H-cluster at the level of electronic structure and mechanism as well as to defining the biological means to synthesize such a unique metal cluster. The chapter describes the structural architecture of [FeFe]-hydrogenases and key spectroscopic observations that have afforded the field with a fundamental basis for understanding the relationship between structure and reactivity of the H-cluster. In addition, the results and ideas concerning the topic of H-cluster biosynthesis as an emerging and fascinating area of research, effectively reinforcing the potential linkage between iron-sulfur biochemistry to the role of iron-sulfur minerals in prebiotic chemistry and the origin of life.

The Electronic Structure of the H-Cluster in the [FeFe]-Hydrogenase from Desulfovibrio desulfuricans: A Q-band 57Fe-ENDOR and HYSCORE Study

The active site of the (57)Fe-enriched [FeFe]-hydrogenase (i.e., the "H-cluster") from Desulfovibrio desulfuricans has been examined using advanced pulse EPR methods at X- and Q-band frequencies. For both the active oxidized state (H(ox)) and the CO inhibited form (H(ox)-CO) all six (57)Fe hyperfine couplings were detected. The analysis shows that the apparent spin density extends over the whole H-cluster. The investigations revealed different hyperfine couplings of all six (57)Fe nuclei in the H-cluster of the H(ox)-CO state. Four large 57Fe hyperfine couplings in the range 20-40 MHz were found (using pulse ENDOR and TRIPLE methods) and were assigned to the [4Fe-4S](H) (cubane) subcluster. Two weak (57)Fe hyperfine couplings below 5 MHz were identified using Q-band HYSCORE spectroscopy and were assigned to the [2Fe](H) subcluster. For the H(ox) state only two different 57Fe hyperfine couplings in the range 10-13 MHz were detected using pulse ENDOR. An (57)Fe line broadening analysis of the X-band CW EPR spectrum indicated, however, that all six (57)Fe nuclei in the H-cluster are contributing to the hyperfine pattern. It is concluded that in both states the binuclear subcluster [2Fe](H) assumes a [Fe(I)Fe(II)] redox configuration where the paramagnetic Fe(I) atom is attached to the [4Fe-4S](H) subcluster. The (57)Fe hyperfine interactions of the formally diamagnetic [4Fe-4S](H) are due to an exchange interaction between the two subclusters as has been discussed earlier by Popescu and Münck [Popescu, C.V.; Münck, E., J. Am. Chem. Soc. 1999, 121, 7877-7884]. This exchange coupling is strongly enhanced by binding of the extrinsic CO ligand. Binding of the dihydrogen substrate may induce a similar effect, and it is therefore proposed that the observed modulation of the electronic structure by the changing ligand surrounding plays an important role in the catalytic mechanism of [FeFe]-hydrogenase.

Electrochemical Investigations of the Interconversions between Catalytic and Inhibited States of the [FeFe]-Hydrogenase from Desulfovibrio desulfuricans

Studies of the catalytic properties of the [FeFe]-hydrogenase from Desulfovibrio desulfuricans by protein film voltammetry, under a H2 atmosphere, reveal and establish a variety of interesting properties not observed or measured quantitatively with other techniques. The catalytic bias (inherent ability to oxidize hydrogen vs reduce protons) is quantified over a wide pH range: the enzyme is proficient at both H2 oxidation (from pH > 6) and H2 production (pH < 6). Hydrogen production is inhibited by H2, but the effect is much smaller than observed for [NiFe]-hydrogenases from Allochromatium vinosum or Desulfovibrio fructosovorans. Under anaerobic conditions and positive potentials, the [FeFe]-hydrogenase is oxidized to an inactive form, inert toward reaction with CO and O2, that rapidly reactivates upon one-electron reduction under 1 bar of H2. The potential dependence of this interconversion shows that the oxidized inactive form exists in two pH-interconvertible states with pK(ox) = 5.9. Studies of the CO-inhibited enzyme under H2 reveals a strong enhancement of the rate of activation by white light at -109 mV (monitoring H2 oxidation) that is absent at low potential (-540 mV, monitoring H+ reduction), thus demonstrating photolability that is dependent upon the oxidation state.

The active site of the [FeFe]-hydrogenase from Desulfovibrio desulfuricans. II. Redox properties, light sensitivity and CO-ligand exchange as observed by infrared spectroscopy

In [FeFe]-hydrogenases, the H cluster (hydrogen-activating cluster) contains a di-iron centre ([2Fe]H subcluster, a (L)(CO)(CN)Fe(mu-RS2)(mu-CO)Fe(CysS)(CO)(CN) group) covalently attached to a cubane iron-sulphur cluster ([4Fe-4S]H subcluster). The Cys-thiol functions as the link between one iron (called Fe1) of the [2Fe]H subcluster and one iron of the cubane subcluster. The other iron in the [2Fe]H subcluster is called Fe2. The light sensitivity of the Desulfovibrio desulfuricans enzyme in a variety of states has been studied with infrared (IR) spectroscopy. The aerobic inactive enzyme (H(inact) state) and the CO-inhibited active form (H(ox)-CO state) were stable in light. Illumination of the H(ox) state led to a kind of cannibalization; in some enzyme molecules the H cluster was destroyed and the released CO was captured by the H clusters in other molecules to form the light-stable H(ox)-CO state. Illumination of active enzyme under 13CO resulted in the complete exchange of the two intrinsic COs bound to Fe2. At cryogenic temperatures, light induced the photodissociation of the extrinsic CO and the bridging CO of the enzyme in the H(ox)-CO state. Electrochemical redox titrations showed that the enzyme in the H(inact) state converts to the transition state (H(trans)) in a reversible one-electron redox step (E (m, pH 7) = -75 mV). IR spectra demonstrate that the added redox equivalent not only affects the [4Fe-4S]H subcluster, but also the di-iron centre. Enzyme in the H(trans) state reacts with extrinsic CO, which binds to Fe2. The H(trans) state converts irreversibly into the H(ox) state in a redox-dependent reaction most likely involving two electrons (E (m, pH 7) = -261 mV). These electrons do not end up on any of the six Fe atoms of the H cluster; the possible destiny of the two redox equivalents is discussed. An additional reversible one-electron redox reaction leads to the H(red) state (E (m, pH 7) = -354 mV), where both Fe atoms of the [2Fe]H subcluster have the same formal oxidation state. The possible oxidation states of Fe1 and Fe2 in the various enzyme states are discussed. Low redox potentials (below -500 mV) lead to destruction of the [2Fe]H subcluster.

The active site of the [FeFe]-hydrogenase from Desulfovibrio desulfuricans. I. Light sensitivity and magnetic hyperfine interactions as observed by electron paramagnetic resonance

The hydrogen-activating cluster (H cluster) in [FeFe]-hydrogenases consists of two moieties. The [2Fe]H subcluster is a (L)(CO)(CN)Fe(mu-RS2)(mu-CO)Fe(CysS)(CO)(CN) centre. The Cys-bound Fe is called Fe1, the other iron Fe2. The Cys-thiol forms a bridge to a [4Fe-4S] cluster, the [4Fe-4S]H subcluster. We report that electron paramagnetic resonance (EPR) spectra of the 57Fe-enriched enzyme from Desulfovibrio desulfuricans in the H(ox)-CO state are consistent with a magnetic hyperfine interaction of the unpaired spin with all six Fe atoms of the H cluster. In contrast to the inactive aerobic enzyme, the active enzyme is easily destroyed by light. The [2Fe]H subcluster in some enzyme molecules loses CO by photolysis, whereupon other molecules firmly bind the released CO to form the H(ox)-CO state giving rise to the so-called axial 2.06 EPR signal. Though not destroyed by light, the H(ox)-CO state is affected by it. As demonstrated in the accompanying paper [49] two of the intrinsic COs, both bound to Fe2, can be exchanged by extrinsic 13CO during illumination at 2 degrees C. We found that only one of the three 13COs, the one at the extrinsic position, gives an EPR-detectable isotropic superhyperfine interaction of 0.6 mT. At 30 K both the inhibiting extrinsic CO bound to Fe2 and one more CO can be photolysed. EPR spectra of the photolysed products are consistent with a 3d7 system of Fe with the formal oxidation state +1. The damaged enzyme shows a light-sensitive g = 5 signal which is ascribed to an S = 3/2 form of the [2Fe](H) subcluster. The light sensitivity of the enzyme explains the occurrence of the g = 5 signal and the axial 2.06 signal in published EPR spectra of nearly all preparations studied thus far.

Computational Studies of the H-Cluster of Fe-Only Hydrogenases: Geometric, Electronic, and Magnetic Properties and Their Dependence on the [Fe4S4] Cubane

The active sites of Fe-only hydrogenases (FeHases) feature an unusual polynuclear iron-sulfur cluster, known as the H-cluster, that consists of a [Fe4S4] cubane linked to a di-iron subunit (the [2Fe]H component) via a bridging cysteine ligand (SCys). While previous computational studies of FeHases employed H-cluster models that only included the [2Fe]H component, we have utilized density functional theory (DFT), in conjunction with the broken-symmetry (BS) approach, to explore the geometric, electronic, and magnetic properties of the entire H-cluster. These calculations have allowed us to evaluate, for the first time, the influence of the [Fe4S4] cubane on the [2Fe]H component of the H-cluster in its active (Hox) and CO-inhibited (Hox-CO) states, both of which are paramagnetic (S=1/2). Our results reveal that the presence of the cubane tunes both the position and the donor strength of the SCys ligand, which, in turn, modulates the internal geometric and electronic structures of the [2Fe]H subcluster. Importantly, the BS methodology provides an accurate description of the exchange interactions within the H-cluster, permitting insight into the electronic origin of the changes in magnetic properties observed experimentally upon conversion of Hox to Hox-CO. Specifically, while the unpaired spin density in the Hox state is localized on the distal Fe center, in the Hox-CO state, it is delocalized over the [2Fe]H component, such that the proximal Fe center acquires significant spin density (where distal and proximal refer to the positions of the Fe centers relative to the cubane). To validate our H-cluster models on the basis of experimental data, two DFT-based approaches and the semiempirical INDO/S method have been employed to compute electron paramagnetic resonance parameters for the H-cluster states. While most computations yield reasonably accurate g values and ligand hyperfine coupling constants (i.e., A values) for the Hox and Hox-CO states, they fail to reproduce the isotropic 57Fe A tensors found experimentally. Finally, extension of the computational methodology employed successfully for the Hox and Hox-CO states to the metastable Hoxphoto state, generated by irradiation of the Hox-CO state at cryogenic temperatures, has allowed us to discriminate between proposed structural models for this species.

Density Functional Theory Investigation of the Active Site of Fe-Hydrogenases. Systematic Study of the Effects of Redox State and Ligands Hardness on Structural and Electronic Properties of Complexes Related to the [2Fe]H Subcluster

Density functional theory has been used to investigate complexes related to the [2Fe](H) subcluster of [Fe]-hydrogenases. In particular, the effects on structural and electronic properties of redox state and ligands with different sigma-donor pi-acceptor character, which replace the cysteine residue coordinated to the [2Fe](H) subcluster in the enzyme, have been investigated. Results show that the structural and electronic properties of fully reduced Fe(I)Fe(I) complexes are strongly affected by the nature of the ligand L, and in particular, a progressive rotation of the Fe(d)(CO)(2)(CN) group, with a CO ligand moving from a terminal to a semibridged position, is observed going from the softest to the hardest ligand. For the partially oxidized Fe(I)Fe(II) complexes, two isomers of similar stability, characterized either by a CO ligand in a terminal or bridged position, have been observed. The switching between the two forms is associated with a spin and charge transfer between the two iron atoms, a feature that could be relevant in the catalytic mechanism of dihydrogen activation. The structure of the fully oxidized Fe(II)Fe(II) models is extremely dependent on the nature of the L ligand; one CO group coordinated to Fe(d) switches from terminal to bridging position going from complexes characterized by neutral to anionic L ligands.

Density functional theory investigation of the active site of [Fe]-hydrogenases: effects of redox state and ligand characteristics on structural, electronic, and reactivity properties of complexes related to the [2Fe]H subcluster

The effects of redox state and ligand characteristics on structural, electronic, and reactivity properties of complexes related to the [2Fe](H) subcluster of [Fe]-hydrogenases have been investigated by DFT calculations and compared with experimental and theoretical data obtained investigating both the enzyme and synthetic model complexes. Our results show that Fe(II)Fe(II) species characterized by OH or H(2)O groups terminally coordinated to the iron atom distal to the terminal sulfur ligand (Fe(d)) are less stable than corresponding mu-OH or mu-H(2)O species, suggesting that the latter are destabilized or kinetically inaccessible in the enzyme. In addition, results obtained investigating Fe(I)Fe(I) and Fe(II)Fe(I) complexes show that structure and relative stability of species characterized by a mu-CO group are significantly affected by the electronic properties of the ligands coordinated to the iron atoms. The investigation of reaction pathways for H(2) activation confirms and extends a previous hypothesis indicating that H(2) can be cleaved on Fe(II)Fe(II) species. In particular, even though [Fe]-hydrogenases are proposed to bind and activate H(2) at a single iron center, the comparison of our data with experimental results obtained studying synthetic complexes (Zhao, X.; Georgakaki, I. P.; Miller, M. L.; Mejia-Rodriguez, R.; Chiang, C.-Y.; Darensbourg, M. Y. Inorg. Chem. 2002, 41, 3917) suggests that activation paths involving both metal ions are also possible. Moreover, mu-H Fe(II)Fe(I) complexes are predicted to correspond to stable species and might be formed in the enzyme catalytic cycle.

Dinuclear iron(II)-cyanocarbonyl complexes linked by two/three bridging ethylthiolates: relevance to the active site of [Fe] hydrogenases

Dinuclear iron(II)-cyanocarbonyl complex [PPN](2)[Fe(CN)(2)(CO)(2)(mu-SEt)](2) (1) was prepared by the reaction of [PPN][FeBr(CN)(2)(CO)(3)] and [Na][SEt] in THF at ambient temperature. Reaction of complex 1 with [PPN][SEt] produced the triply thiolate-bridged dinuclear Fe(II) complex [PPN][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)] (2) with the torsion angle of two CN(-) groups (C(5)N(2) and C(3)N(1)) being 126.9 degrees. The extrusion of two sigma-donor CN(-) ligands from Fe(II)Fe(II) centers of complex 1 as a result of the reaction of complex 1 and [PPN][SEt] reflects the electron-rich character of the dinuclear iron(II) when ligated by the third bridging ethylthiolate. The Fe-S distances (2.338(2) and 2.320(3) A for complexes 1 and 2, respectively) do not change significantly, but the Fe(II)-Fe(II) distance contracts from 3.505 A in complex 1 to 3.073 A in complex 2. The considerably longer Fe(II)-Fe(II) distance of 3.073 A in complex 2, compared to the reported Fe-Fe distances of 2.6/2.62 A in DdHase and CpHase, was attributed to the presence of the third bridging ethylthiolate, instead of pi-accepting CO-bridged ligand as observed in [Fe] hydrogenases. Additionally, in a compound of unusual composition ([Na.(5)/(2)H(2)O][(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)])(n)((1)/(2)O(Et)(2))(n) (3), the Na(+) cations and H(2)O molecules combining with dinuclear [(CN)(CO)(2)Fe(mu-SEt)(3)Fe(CO)(2)(CN)](-) anions create a polymeric framework wherein two CN(-) ligands are coordinated via CN(-)-Na(+)/CN(-)-(Na(+))(2) linkages, respectively.

A density functional theory study on the active center of Fe-only hydrogenase: characterization and electronic structure of the redox states

We have carried out extensive density functional theory (DFT) calculations for possible redox states of the active center in Fe-only hydrogenases. The active center is modeled by [(H(CH(3))S)(CO)(CN(-))Fe(p)(mu-DTN)(mu-CO)Fe(d)(CO)(CN(-))(L)](z)() (z is the net charge in the complex; Fe(p)= the proximal Fe, Fe(d) = the distal Fe, DTN = (-SCH(2)NHCH(2)S-), L is the ligand that bonds with the Fe(d) at the trans position to the bridging CO). Structures of possible redox states are optimized, and CO stretching frequencies are calculated. By a detailed comparison of all the calculated structures and the vibrational frequencies with the available experimental data, we find that (i) the fully oxidized, inactive state is an Fe(II)-Fe(II) state with a hydroxyl (OH(-)) group bonded at the Fe(d), (ii) the oxidized, active state is an Fe(II)-Fe(I) complex which is consistent with the assignment of Cao and Hall (J. Am. Chem. Soc. 2001, 123, 3734), and (iii) the fully reduced state is a mixture with the major component being a protonated Fe(I)-Fe(I) complex and the other component being its self-arranged form, Fe(II)-Fe(II) hydride. Our calculations also show that the exogenous CO can strongly bond with the Fe(II)-Fe(I) species, but cannot bond with the Fe(I)-Fe(I) complex. This result is consistent with experiments that CO tends to inhibit the oxidized, active state, but not the fully reduced state. The electronic structures of all the redox states have been analyzed. It is found that a frontier orbital which is a mixing state between the e(g) of Fe and the 2 pi of the bridging CO plays a key role concerning the reactivity of Fe-only hydrogenases: (i) it is unoccupied in the fully oxidized, inactive state, half-occupied in the oxidized, active state, and fully occupied in the fully reduced state; (ii) the e(g)-2 pi orbital is a bonding state, and this is the key reason for stability of the low oxidation states, such as Fe(I)-Fe(I) complexes; and (iii) in the e(g)-2 pi orbital more charge accumulates between the bridging CO and the Fe(d) than between the bridging CO and the Fe(p), and the occupation increase in this orbital will enhance the bonding between the bridging CO and the Fe(d), leading to the bridging-CO shift toward the Fe(d).