Restoration of Membrane Incorporation of an Escherichia coli Outer Membrane Protein (OmpA) Defective in Membrane Insertion

Protective Immunity Elicited by VP1 Chimeric Antigens of Bacterial Ghosts against Hand-Foot-and-Mouth Disease Virus

This study was designed to evaluate the immunogenicity and protective efficacy of two VP1 chimeric antigens of bacterial ghosts. Inoculation of the two VP1 chimeric antigens of bacterial ghosts into BALB/c mice markedly elicited humoral and mucosal immune responses. The specific antibodies induced by the chimeric ghosts protected mice not only against the virus that causes hand-foot-and-mouth disease but also against E. coli O157:H7 bacterial infection. In comparison with the negative control, immunization with the chimeric ghosts protected mice against two LD₅₀ hand-foot-and-mouth disease viral infection. In addition, this specific immunity also protected the pups of pregnant mice immunized with the VP1 chimeric antigens of bacterial ghosts against 20 MLD E. coli O157:H7 infection. Taken together, the results of this study verify for the first time that the VP1 chimeric antigens of bacterial ghosts are target candidates for a new type of vaccine against hand-foot-and-mouth disease. Additionally, this vaccine strategy also elicited a stronger immune response against E. coli O157:H7.

Novel fusion antigen displayed-bacterial ghosts vaccine candidate against infection of Escherichia coli O157:H7

Infection with Escherichia coli O157:H7 may develop into hemorrhagic colitis, or hemolytic uremic syndrome (HUS), which usually causes kidney failure or even death. The adhesion and toxins are the important virulent factors. In this study, a novel vaccine candidate rSOBGs was constructed based on the bacterial ghost (BG). rSOBGs maintained the integrity of cellular morphology and displayed the linear Stx2Am-Stx1B antigen on the surface of outer membrane. rSOBGs induced Stxs-specific IgA/IgG antibodies and stronger intimin-specific IgA/IgG antibodies effectively in sera in this study. In vivo, the rSOBGs provided the higher protection rate (52%) than native bacterial ghost-OBGs (12%) when challenged intragastricly with high dose (500 LD50) viable E. coli O157:H7. Meanwhile, the rSOBGs provided higher protection rate (73.33%) than OBGs when challenged with 2 LD50 even to 5 LD50 lysed E. coli O157:H7. In vitro, the rSOBGs-immunized sera possessed neutralizing activity to lysed pathogenic bacteria. Furthermore, the results of histopathology also displayed that the administration of rSOBGs have the ability to reduce or inhibit the adhesion lesions and toxins damages of organs. The novel vaccine candidate rSOBGs induced both anti-toxin and anti-adhesion immune protection, suggesting the possibility to prevent the infectious diseases caused by Escherichia coli O157:H7.

Computational redesign of the lipid-facing surface of the outer membrane protein OmpA

Advances in computational design methods have made possible extensive engineering of soluble proteins, but designed β-barrel membrane proteins await improvements in our understanding of the sequence determinants of folding and stability. A subset of the amino acid residues of membrane proteins interact with the cell membrane, and the design rules that govern this lipid-facing surface are poorly understood. We applied a residue-level depth potential for β-barrel membrane proteins to the complete redesign of the lipid-facing surface of Escherichia coli OmpA. Initial designs failed to fold correctly, but reversion of a small number of mutations indicated by backcross experiments yielded designs with substitutions to up to 60% of the surface that did support folding and membrane insertion.

Bacterial expression of the major antigenic regions of porcine rotavirus VP7 induces a neutralizing immune response in mice

The outer capsid protein of rotavirus, VP7, is a major neutralization antigen. A chimeric protein comprising Escherichia coli (E. coli) outer membrane protein A (OmpA) and part of porcine rotavirus VP7 containing all three antigenic regions (217 amino acids) was expressed in Salmonella and E. coli as an outer-membrane associated protein. Mice immunized intraperitoneally or orally, respectively, with live E. coli or Salmonella cells expressing this chimeric protein produced antibodies against native VP7 as determined by enzyme-linked immunosorbent assays and neutralization tests. This indicates that the VP7 fragment from a porcine rotavirus which is antigenically similar to human rotavirus serotype 3, when expressed in bacteria as a chimeric protein, can form a structure resembling its native form at least in some of the major neutralization domains. These results indicate that the use of a live bacterial vector expressing rotavirus VP7 may represent a strategy for the development of vaccines against rotavirus-induced diarrhoea in infants.

Membrane assembly of the Escherichia coli outer membrane protein OmpA: exploring sequence constraints on transmembrane beta-strands

The eight-stranded antiparallel beta-barrel domain of the OmpA protein from Escherichia coli serves as a paradigm for the study of membrane assembly of integral beta-structured membrane proteins. Previous studies have shown that neither the periplasmic turns nor the surface-exposed loops contain topogenic information. Consequently, the question of whether any structural constraint is imposed onto individual transmembrane beta-strands is now addressed. To this end, amino acid sequences of beta-strands 4, 6 and 8 were randomized. In vivo membrane assembly of mutant proteins was assayed and 288 variants were sequenced. Three parameters were found to be important for efficient membrane assembly. (i) At least four of five randomized residues with side-chains pointing towards the lipid bilayer must be hydrophobic and none of the three central residues must be charged. (ii) Side-chains pointing into the beta-barrel interior must not be enlarged too much, possibly because of packing constraints. (iii) Proline residues are, in general, hardly tolerated in the transmembrane beta-strands.

A periplasmic protein (Skp) of Escherichia coli selectively binds a class of outer membrane proteins

A search was performed for a periplasmic molecular chaperone which may assist outer membrane proteins of Escherichia coli on their way from the cytoplasmic to the outer membrane. Proteins of the periplasmic space were fractionated on an affinity column with sepharose-bound outer membrane porin OmpF. A 17 kDa polypeptide was the predominant protein retained by this column. The corresponding gene was found in a gene bank; it encodes the periplasmic protein Skp. The protein was isolated and it could be demonstrated that it bound outer membrane proteins, following SDS-PAGE, with high selectivity. Among these were OmpA, OmpC, OmpF and the maltoporin LamB. The chromosomal skp gene was inactivated by a deletion causing removal of most of the signal peptide plus 107 residues of the 141-residue mature protein. The mutant was viable but possessed much-reduced concentrations of outer membrane proteins. This defect was fully restored by a plasmid-borne skp gene which may serve as a periplasmic chaperone.

The expression of recombinant proteins on the external surface of Escherichia coli. Biotechnological applications

The expression of recombinant proteins on the external surface of Gram-negative bacteria is expected to open the way for a number of significant biotechnological applications, including the development of live bacterial vaccines, the production of whole cell adsorbents, the preparation of whole cell catalysts, and the display and selection of peptide and antibody libraries. We have developed a fusion protein system for the production of active recombinant proteins on the surface of Escherichia coli. Using this system we have expressed beta-lactamase, the Cellulomonas fimi exoglucanase Cex as well as its cellulose binding domain, and an antidigoxin single chain Fv antibody fragment on the cell surface. Recently we have begun to explore some of the potential applications for cell-surface expression.

Membrane topology and assembly of the outer membrane protein OmpA of Escherichia coli K12

The 325-residue outer membrane protein OmpA of Escherichia coli has been proposed to consist of a membrane-embedded moiety (residues 1 to about 170) and a C-terminal periplasmic region. The former is thought to comprise eight transmembrane segments in the form of antiparallel beta-strands, forming an amphiphilic beta-barrel, connected by exposed turns. Several questions concerning this model were addressed. Thus no experimental evidence had been presented for the turns at the inner leaflet of the membrane and it was not known whether or not the periplasmic part of the polypeptide plays a role in the process of membrane incorporation. Oligonucleotides encoding trypsin cleavage sites were inserted at the predicted turn sites of the ompA gene and it was shown that the encoded proteins indeed become accessible to trypsin at the modified sites. Together with previous results, these data also show that the turns on both sides of the membrane do not possess specifically topogenic information. In two cases one of the two expected tryptic fragments was lost and could be detected at low concentration in only one case. Therefore, bilateral proteolytic digestion of outer membranes can cause loss of beta-strands and does not necessarily produce a reliable picture of protein topology. When ompA genes were constructed coding for proteins ending at residue 228 or 274, the membrane assembly of these proteins was shown to be partially defective with about 20% of the proteins not being assembled. No such defect was observed when, following the introduction of a premature stop codon, a truncated protein was produced ending with residue 171.(ABSTRACT TRUNCATED AT 250 WORDS)

Expert system for predicting protein localization sites in gram-negative bacteria

We have developed an expert system that makes use of various kinds of knowledge organized as "if-then" rules for predicting protein localization sites in Gram-negative bacteria, given the amino acid sequence information alone. We considered four localization sites: the cytoplasm, the inner (cytoplasmic) membrane, the periplasm, and the outer membrane. Most rules were derived from experimental observations. For example, the rule to recognize an inner membrane protein is the presence of either a hydrophobic stretch in the predicted mature protein or an uncleavable N-terminal signal sequence. Lipoproteins are first recognized by a consensus pattern and then assumed present at either the inner or outer membrane. These two possibilities are further discriminated by examining an acidic residue in the mature N-terminal portion. Furthermore, we found an empirical rule that periplasmic and outer membrane proteins were successfully discriminated by their different amino acid composition. Overall, our system could predict 83% of the localization sites of proteins in our database.

Export and sorting of the Escherichia coli outer membrane protein OmpA

Results of studies, mostly using the outer membrane, 325 residue protein OmpA, are reviewed which concern its translocation across the plasma membrane and incorporation into the outer membrane of Escherichia coli. For translocation, neither a unique export signal, acting in a positive fashion within the mature part of the precursor, nor a unique conformation of the precursor is required. Rather, the mature part of a secretory protein has to be export-compatible. Export-incompatibility can be caused by a stretch of 16 (but not 8 or 12) hydrophobic residues, too low a size of the polypeptide (smaller than 75 residue precursors), net positive charge at the N-terminus, or lack of a turn potential at the same site. It is not yet clear whether binding sites for chaperonins (SecB, trigger factor, GroEL) within OmpA are important in vivo. The mechanism of sorting of outer membrane proteins is not yet understood. The membrane part of OmpA, encompassing residues 1 to about 170, it thought to traverse the membrane eight times in antiparallel beta-sheet conformation. At least the structure of the last beta-strand (residues 160-170) is of crucial importance for membrane assembly. It must be amphiphilic or hydrophobic, these properties must extend over at least nine residues, and it must not contain a proline residue at or near its center. Membrane incorporation of OmpA involves a conformational change of the protein and it could be that the last beta-strand initiates folding and assembly in the outer membrane.