Differential effect of steady versus oscillating flow on bone cells

Microenvironment-targeted strategy steers advanced bone regeneration

Treatment of large bone defects represents a great challenge in orthopedic and craniomaxillofacial surgery. Traditional strategies in bone tissue engineering have focused primarily on mimicking the extracellular matrix (ECM) of bone in terms of structure and composition. However, the synergistic effects of other cues from the microenvironment during bone regeneration are often neglected. The bone microenvironment is a sophisticated system that includes physiological (e.g., neighboring cells such as macrophages), chemical (e.g., oxygen, pH), and physical factors (e.g., mechanics, acoustics) that dynamically interact with each other. Microenvironment-targeted strategies are increasingly recognized as crucial for successful bone regeneration and offer promising solutions for advancing bone tissue engineering. This review provides a comprehensive overview of current microenvironment-targeted strategies and challenges for bone regeneration and further outlines prospective directions of the approaches in construction of bone organoids.

Fluid flow shear stress and tissue remodeling-an orthodontic perspective: evidence synthesis and differential gene expression network analysis

Introduction: This study aimed to identify and analyze in vitro studies investigating the biological effect of fluid-flow shear stress (FSS) on cells found in the periodontal ligament and bone tissue. Method: We followed the PRISMA guideline for systematic reviews. A PubMed search strategy was developed, studies were selected according to predefined eligibility criteria, and the risk of bias was assessed. Relevant data related to cell source, applied FSS, and locus-specific expression were extracted. Based on this evidence synthesis and, as an original part of this work, analysis of differential gene expression using over-representation and network-analysis was performed. Five relevant publicly available gene expression datasets were analyzed using gene set enrichment analysis (GSEA). Result: A total of 6,974 articles were identified. Titles and abstracts were screened, and 218 articles were selected for full-text assessment. Finally, 120 articles were included in this study. Sample size determination and statistical analysis related to methodological quality and the ethical statement item in reporting quality were most frequently identified as high risk of bias. The analyzed studies mostly used custom-made fluid-flow apparatuses (61.7%). FSS was most frequently applied for 0.5 h, 1 h, or 2 h, whereas FSS magnitudes ranged from 6 to 20 dyn/cm2 depending on cell type and flow profile. Fluid-flow frequencies of 1 Hz in human cells and 1 and 5 Hz in mouse cells were mostly applied. FSS upregulated genes/metabolites responsible for tissue formation (AKT1, alkaline phosphatase, BGLAP, BMP2, Ca2+, COL1A1, CTNNB1, GJA1, MAPK1/MAPK3, PDPN, RUNX2, SPP1, TNFRSF11B, VEGFA, WNT3A) and inflammation (nitric oxide, PGE-2, PGI-2, PTGS1, PTGS2). Protein-protein interaction networks were constructed and analyzed using over-representation analysis and GSEA to identify shared signaling pathways. Conclusion: To our knowledge, this is the first review giving a comprehensive overview and discussion of methodological technical details regarding fluid flow application in 2D cell culture in vitro experimental conditions. Therefore, it is not only providing valuable information about cellular molecular events and their quantitative and qualitative analysis, but also confirming the reproducibility of previously published results.

Ultrasound-derived mechanical stimulation of cell-laden collagen hydrogels for bone repair

Cell therapy is emerging as an effective treatment strategy for many diseases. Here we describe a novel approach to bone tissue repair that combines hydrogel-based cell therapy with low intensity pulsed ultrasound (LIPUS), an FDA approved treatment for fracture repair. Bone marrow-derived stromal cells (BMSCs) have been encapsulated in type I collagen hydrogels and mechanically stimulated using LIPUS-derived acoustic radiation force (ARF). We observed the expression and upward trend of load-sensitive, osteoblast-specific markers and determined that the extent of cell response is dependent on an optimal combination of both hydrogel stiffness and ARF intensity. Specifically, cells encapsulated in hydrogels of optimal stiffness respond at the onset of ultrasound by upregulating early bone-sensitive markers such as calcium, cyclooxygenase-2, and prostaglandin E2 , and later by supporting mineralized tissue formation after 21 days of culture. In vivo evaluation of a critical size calvarial defect in NOD scid gamma (NSG) mice indicated that the implantation of BMSC-laden hydrogels of optimal stiffness improved healing of calvarial defects after daily administration of ARF over 4 weeks. Collectively, these findings validate the efficacy of our system of localized cell delivery for treating bone defects where undifferentiated BMSCs are induced to the osteoblastic lineage. Further, in vivo healing may be enhanced via non-invasive transdermal mechanical stimulation of implanted cells using ARF.

Effect of Uniaxial Compression Frequency on Osteogenic Cell Responses in Dynamic 3D Cultures

The application of mechanical stimulation on bone tissue engineering constructs aims to mimic the native dynamic nature of bone. Although many attempts have been made to evaluate the effect of applied mechanical stimuli on osteogenic differentiation, the conditions that govern this process have not yet been fully explored. In this study, pre-osteoblastic cells were seeded on PLLA/PCL/PHBV (90/5/5 wt.%) polymeric blend scaffolds. The constructs were subjected every day to cyclic uniaxial compression for 40 min at a displacement of 400 μm, using three frequency values, 0.5, 1, and 1.5 Hz, for up to 21 days, and their osteogenic response was compared to that of static cultures. Finite element simulation was performed to validate the scaffold design and the loading direction, and to assure that cells inside the scaffolds would be subjected to significant levels of strain during stimulation. None of the applied loading conditions negatively affected the cell viability. The alkaline phosphatase activity data indicated significantly higher values at all dynamic conditions compared to the static ones at day 7, with the highest response being observed at 0.5 Hz. Collagen and calcium production were significantly increased compared to static controls. These results indicate that all of the examined frequencies substantially promoted the osteogenic capacity.

A User-Centric 3D-Printed Modular Peristaltic Pump for Microfluidic Perfusion Applications

Microfluidic organ-on-a-chip (OoC) technology has enabled studies on dynamic physiological conditions as well as being deployed in drug testing applications. A microfluidic pump is an essential component to perform perfusion cell culture in OoC devices. However, it is challenging to have a single pump that can fulfil both the customization function needed to mimic a myriad of physiological flow rates and profiles found in vivo and multiplexing requirements (i.e., low cost, small footprint) for drug testing operations. The advent of 3D printing technology and open-source programmable electronic controllers presents an opportunity to democratize the fabrication of mini-peristaltic pumps suitable for microfluidic applications at a fraction of the cost of commercial microfluidic pumps. However, existing 3D-printed peristaltic pumps have mainly focused on demonstrating the feasibility of using 3D printing to fabricate the structural components of the pump and neglected user experience and customization capability. Here, we present a user-centric programmable 3D-printed mini-peristaltic pump with a compact design and low manufacturing cost (~USD 175) suitable for perfusion OoC culture applications. The pump consists of a user-friendly, wired electronic module that controls the operation of a peristaltic pump module. The peristaltic pump module comprises an air-sealed stepper motor connected to a 3D-printed peristaltic assembly, which can withstand the high-humidity environment of a cell culture incubator. We demonstrated that this pump allows users to either program the electronic module or use different-sized tubing to deliver a wide range of flow rates and flow profiles. The pump also has multiplexing capability as it can accommodate multiple tubing. The performance and user-friendliness of this low-cost, compact pump can be easily deployed for various OoC applications.

Nonlinear dynamics of membrane skeleton in osteocyte

Osteocytes play an important role in mechanosensation and conduction in bone tissue, and the change of mechanical environment can affect the sensitivity of osteocytes to external stimulation. The structure of osteocytes will be changed when they are subjected to vibrations, which influence the mechanosensitivity of osteocytes and alter the regulation of bone remodeling process. As an important mechanotransduction structure in osteocytes, the membrane skeleton greatly affects the mechanosensation and conduction of osteocytes. However, the dynamic responses of membrane skeleton to the vibration and the structural changes of membrane skeleton are unclear. Therefore, we applied a nonlinear dynamics method to explain the time-dependent changes of membrane skeleton. The semi-ellipsoidal reticulate shell structure of membrane skeleton is built based on the experimental observation in our previous work. Then, the nonlinear dynamic equations of membrane skeleton are established according to the theory of plate and shell dynamics, and the displacement-time curves, phase portraits, and Poincaré maps of membrane skeleton structure were obtained. The numeration results show that under the vibration stimulation of 15 Hz, 30 Hz, 60 Hz, and 90 Hz, the membrane skeleton is destroyed after a transient equilibrium position vibration. The vibration of 15 Hz has the most destructive effect on the membrane skeleton, the natural frequency of membrane skeleton may be less than 15 Hz. In addition, the chaos phenomenon occurs to the membrane skeleton during vibration. As a damping factor, the existence of viscosity alleviates the damage of structure. This study can help us to understand the oscillation characteristic of membrane skeleton in osteocyte.

Adjustable Thermo-Responsive, Cell-Adhesive Tissue Engineering Scaffolds for Cell Stimulation through Periodic Changes in Culture Temperature

A three-dimensional (3D) scaffold ideally provides hierarchical complexity and imitates the chemistry and mechanical properties of the natural cell environment. Here, we report on a stimuli-responsive photo-cross-linkable resin formulation for the fabrication of scaffolds by continuous digital light processing (cDLP), which allows for the mechano-stimulation of adherent cells. The resin comprises a network-forming trifunctional acrylate ester monomer (trimethylolpropane triacrylate, or TMPTA), N-isopropyl acrylamide (NiPAAm), cationic dimethylaminoethyl acrylate (DMAEA) for enhanced cell interaction, and 4-acryloyl morpholine (AMO) to adjust the phase transition temperature (T_trans) of the equilibrium swollen cross-polymerized scaffold. With glycofurol as a biocompatible solvent, controlled three-dimensional structures were fabricated and the transition temperatures were adjusted by resin composition. The effects of the thermally induced mechano-stimulation were investigated with mouse fibroblasts (L929) and myoblasts (C2C12) on printed constructs. Periodic changes in the culture temperature stimulated the myoblast proliferation.

How getting twisted in scaffold design can promote bone regeneration: A fluid-structure interaction evaluation

Bone tissue engineering (BTE) uses engineering principles to repair large bone defects, which requires effective mass transport ability of scaffolds to support cellular activities during bone regeneration. Since the implanted BTE scaffolds keep deforming under physiological loading which influences the fluid flow and mass transport within the scaffold and surrounding tissue, thus, scaffold design needs to consider the mass transport behavior under the physiological loading. This work proposed a novel twist scaffold, and its mass transport efficiency under physiological loading conditions was evaluated by a fluid-structure interaction analysis. The results showed that compared to the non-twist scaffold, the twist scaffold could form a rotating flow under the physiological loading, which enhanced the mass transport and generated more appropriate wall shear stress (WSS) to promote bone regeneration. This highlighted the better mass transport efficiency of the twist scaffold. Therefore, getting twist may be a promising design strategy for future BTE scaffolds, and the fluid-structure interaction approach may be a more reliable method for bone regeneration studies in either in vivo or in vitro systems.

Changes in interstitial fluid flow, mass transport and the bone cell response in microgravity and normogravity

In recent years, our scientific interest in spaceflight has grown exponentially and resulted in a thriving area of research, with hundreds of astronauts spending months of their time in space. A recent shift toward pursuing territories farther afield, aiming at near-Earth asteroids, the Moon, and Mars combined with the anticipated availability of commercial flights to space in the near future, warrants continued understanding of the human physiological processes and response mechanisms when in this extreme environment. Acute skeletal loss, more severe than any bone loss seen on Earth, has significant implications for deep space exploration, and it remains elusive as to why there is such a magnitude of difference between bone loss on Earth and loss in microgravity. The removal of gravity eliminates a critical primary mechano-stimulus, and when combined with exposure to both galactic and solar cosmic radiation, healthy human tissue function can be negatively affected. An additional effect found in microgravity, and one with limited insight, involves changes in dynamic fluid flow. Fluids provide the most fundamental way to transport chemical and biochemical elements within our bodies and apply an essential mechano-stimulus to cells. Furthermore, the cell cytoplasm is not a simple liquid, and fluid transport phenomena together with viscoelastic deformation of the cytoskeleton play key roles in cell function. In microgravity, flow behavior changes drastically, and the impact on cells within the porous system of bone and the influence of an expanding level of adiposity are not well understood. This review explores the role of interstitial fluid motion and solute transport in porous bone under two different conditions: normogravity and microgravity.

Symmetry breaking and effects of nutrient walkway in time-dependent bone remodeling incorporating poroelasticity

Bone is an extraordinary biological material that continuously adapts its hierarchical microstructure to respond to static and dynamic loads for offering optimal mechanical features, in terms of stiffness and toughness, across different scales, from the sub-microscopic constituents within osteons—where the cyclic activity of osteoblasts, osteoclasts, and osteocytes redesigns shape and percentage of mineral crystals and collagen fibers—up to the macroscopic level, with growth and remodeling processes that modify the architecture of both compact and porous bone districts. Despite the intrinsic complexity of the bone mechanobiology, involving coupling phenomena of micro-damage, nutrients supply driven by fluid flowing throughout hierarchical networks, and cells turnover, successful models and numerical algorithms have been presented in the literature to predict, at the macroscale, how bone remodels under mechanical stimuli, a fundamental issue in many medical applications such as optimization of femur prostheses and diagnosis of the risk fracture. Within this framework, one of the most classical strategies employed in the studies is the so-called Stanford’s law, which allows uploading the effect of the time-dependent load-induced stress stimulus into a biomechanical model to guess the bone structure evolution. In the present work, we generalize this approach by introducing the bone poroelasticity, thus incorporating in the model the role of the fluid content that, by driving nutrients and contributing to the removal of wastes of bone tissue cells, synergistically interacts with the classical stress fields to change homeostasis states, local saturation conditions, and reorients the bone density rate, in this way affecting growth and remodeling. Through two paradigmatic example applications, i.e. a cylindrical slice with internal prescribed displacements idealizing a tract of femoral diaphysis pushed out by the pressure exerted by a femur prosthesis and a bone element in a form of a bent beam, it is highlighted that the present model is capable to catch more realistically both the transition between spongy and cortical regions and the expected non-symmetrical evolution of bone tissue density in the medium–long term, unpredictable with the standard approach. A real study case of a femur is also considered at the end in order to show the effectiveness of the proposed remodeling algorithm.

Altered mechanotransduction in adolescent idiopathic scoliosis osteoblasts: an exploratory in vitro study

Adolescent idiopathic scoliosis (AIS) is the most prevalent pediatric spinal deformity. We previously demonstrated elongated cilia and an altered molecular mechanosensory response in AIS osteoblasts. The purpose of this exploratory study was to characterize the mechanosensory defect occurring in AIS osteoblasts. We found that cilia length dynamics in response to flow significantly differ in AIS osteoblasts compared to control cells. In addition, strain-induced rearrangement of actin filaments was compromised resulting in a failure of AIS osteoblasts to position or elongate in function of the bidirectional-applied flow. Contrary to control osteoblasts, fluid flow had an inhibitory effect on AIS cell migration. Moreover, flow induced an increase in secreted VEGF-A and PGE2 in control but not AIS cells. Collectively our data demonstrated that in addition to the observed primary cilium defects, there are cytoskeletal abnormalities correlated to impaired mechanotransduction in AIS. Thus, we propose that the AIS etiology could be a result of generalized defects in cellular mechanotransduction given that an adolescent growing spine is under constant stimulation for growth and bone remodeling in response to applied mechanical forces. Recognition of an altered mechanotransduction as part of the AIS pathomechanism must be considered in the conception and development of more effective bracing treatments.

The mechanotransduction of MLO-Y4 cells is disrupted by the senescence-associated secretory phenotype of neighboring cells

Age-related bone loss is attributed to the accumulation of senescent cells and their increasing production of inflammatory cytokines as part of the senescence-associated secretory phenotype (SASP). In otherwise healthy individuals, osteocytes play a key role in maintaining bone mass through their primary function of responding to skeletal loading. Given that osteocytes' response to loading is known to steadily decline with age, we hypothesized that the increasing presence of senescent cells and their SASP inhibit osteocytes' response to loading. To test this hypothesis, we developed two in vitro models of senescent osteocytes and osteoblasts derived from MLO-Y4 and MC3T3 cell lines, respectively. The senescent phenotype was unique to each cell type based on distinct changes in cell cycle inhibitors and SASP profile. The SASP profile of senescent osteocytes was in part dependent on nuclear factor-κB signaling and presents a new potential mechanism to target the SASP in bone. Nonsenescent MLO-Y4 cells cultured with the SASP of each senescent cell type failed to exhibit changes in gene expression as well as ERK phosphorylation and prostaglandin E2 release. The SASP of senescent osteocytes had the largest effect and neutralizing interleukin-6 (IL-6) as part of the SASP restored osteocytes' response to loading. The loss in mechanotransduction due to IL-6 was attributed to a decrease in P2X7 expression and overall sensitivity to purinergic signaling. Altogether, these findings demonstrate that the SASP of senescent cells have a negative effect on the mechanotransduction of osteocytes and that IL-6 is a key SASP component that contributes to the loss in mechanotransduction.

In vitro Fluid Shear Stress Induced Sclerostin Degradation and CaMKII Activation in Osteocytes

Bone is a dynamic tissue that adapts to changes in its mechanical environment. Mechanical stimuli pressurize interstitial fluid in the lacunar-canalicular system within the bone matrix, causing fluid shear stress (FSS) across bone embedded, mechano-sensitive osteocytes. Therefore, modeling this mechanical stimulus in vitro is vital for identifying mechano-transduction cascades that contribute to the regulation of mechano-responsive proteins, such as the Wnt/β-catenin antagonist, sclerostin, which is reduced in response to FSS. Recently, we reported the rapid post-translational degradation of sclerostin protein in bone cells following FSS. Given the fundamental nature of sclerostin to bone physiology and the nuances of studying its rapid post-translational control, here, we detail our FSS protocol, and adaptations that can be made, to stimulate Ocy454 osteocyte-like cells to study sclerostin protein in vitro. While this protocol is optimized for detecting sclerostin degradation by western blot, this protocol can be adapted to examine transcriptional changes with RT-qPCR, cellular dynamics with live cell imaging, or secreted factors in the FSS buffer. This protocol utilizes 3D-printed FSS tips that are compatible with commercially available 96-well plates, allowing for high experimental accessibility, versatility, and throughput. However, this protocol can be adapted for any FSS chamber. It can also be combined with pharmacological inhibitors or genetic manipulations to interrogate the role of specific cellular components. In all, this experimental set-up and protocol is highly adaptable to allow for many experimental outcomes to examine many aspects of cell mechano-transduction.

Osteocyte calcium signaling - A potential translator of mechanical load to mechanobiology

Osteocytes are embedded dendritic bone cells; by virtue of their position in bone tissue, ability to coordinate bone building osteoblasts and resorbing osteoclasts, and sensitivity to tissue level mechanical loading, they serve as the resident bone mechanosensor. The mechanisms osteocytes use to change mechanical loading into biological signals that drive tissue level changes has been well studied over the last 30 years, however the ways loading parameters are encoded at the cellular level are still not fully understood. Calcium signaling is a first messenger signal exhibited by osteocytes in response to mechanical forces. A body of work interrogating the mechanisms of osteocyte calcium signaling exists and is presently expanding, presenting the opportunity to better understand the relationship between calcium signaling characteristics and tuned osteocyte responses to tissue level strain features (e.g. magnitude, duration, frequency). This review covers the history of osteocyte load induced calcium signaling and highlights potential cellular mechanisms used by osteocytes to turn details about loading parameters into biological events.

Control of osteoblast arrangement by osteocyte mechanoresponse through prostaglandin E2 signaling under oscillatory fluid flow stimuli

Anisotropic collagen/apatite microstructure is a prominent determinant of bone tissue functionalization; in particular, bone matrix modulates its anisotropic microstructure depending on the surrounding mechanical condition. Although mechanotransduction in bones is governed by osteocyte function, the precise mechanisms linking mechanical stimuli and anisotropic formation of collagen/apatite microstructure are poorly understood. Here we developed a novel anisotropic mechano-coculture system which enables the understanding of the biological mechanisms regulating the oriented bone matrix formation, which is constructed by aligned osteoblasts. The developed model provides bone-mimetic coculture platform that enables simultaneous control of mechanical condition and osteoblast-osteocyte communication with an anisotropic culture scaffold. The engineered coculture device helps in understanding the relationship between osteocyte mechanoresponses and osteoblast arrangement, which is a significant contributor to anisotropic organization of bone tissue. Our study showed that osteocyte responses to oscillatory flow stimuli regulated osteoblast arrangement through soluble molecular interactions. Importantly, we found that prostaglandin E2 is a novel determinant for oriented collagen/apatite organization of bone matrix, through controlling osteoblast arrangement.

Load adaptation through bone remodeling: a mechanobiological model coupled with the finite element method

This work proposes a novel tissue-scale mechanobiological model of bone remodeling to study bone's adaptation to distinct loading conditions. The devised algorithm describes the mechanosensitivity of bone and its impact on bone cells' functioning through distinct signaling factors. In this study, remodeling is mechanically ruled by variations of the strain energy density (SED) of bone, which is determined by performing a linear elastostatic analysis combined with the finite element method. Depending on the SED levels and on a set of biological signaling factors ([Formula: see text] parameters), osteoclasts and osteoblasts can be mechanically triggered. To reproduce this phenomenon, this work proposes a new set of [Formula: see text] parameters. The combined response of osteoclasts and osteoblasts will then affect bone's apparent density, which is correlated with other mechanical properties of bone, through a phenomenological law. Thus, this novel model proposes a constant interplay between the mechanical and biological components of the process. The spatiotemporal simulation used to validate this new approach is a benchmark example composed by two distinct phases: (1) pre-orientation and (2) load adaptation. On both of them, bone is able to adapt its morphology according to the loading condition, achieving the required trabecular distribution to withstand the applied loads. Moreover, the equilibrium morphology reflects the orientation of the load. These preliminary results support the new approach proposed in this study.

Multiphysics simulation of a compression-perfusion combined bioreactor to predict the mechanical microenvironment during bone metastatic breast cancer loading experiments

Incurable breast cancer bone metastasis causes widespread bone loss, resulting in fragility, pain, increased fracture risk, and ultimately increased patient mortality. Increased mechanical signals in the skeleton are anabolic and protect against bone loss, and they may also do so during osteolytic bone metastasis. Skeletal mechanical signals include interdependent tissue deformations and interstitial fluid flow, but how metastatic tumor cells respond to each of these individual signals remains underinvestigated, a barrier to translation to the clinic. To delineate their respective roles, we report computed estimates of the internal mechanical field of a bone mimetic scaffold undergoing combinations of high and low compression and perfusion using multiphysics simulations. Simulations were conducted in advance of multimodal loading bioreactor experiments with bone metastatic breast cancer cells to ensure that mechanical stimuli occurring internally were physiological and anabolic. Our results show that mechanical stimuli throughout the scaffold were within the anabolic range of bone cells in all loading configurations, were homogenously distributed throughout, and that combined high magnitude compression and perfusion synergized to produce the largest wall shear stresses within the scaffold. These simulations, when combined with experiments, will shed light on how increased mechanical loading in the skeleton may confer anti-tumorigenic effects during metastasis.

Bone-on-a-chip: microfluidic technologies and microphysiologic models of bone tissue

Bone is an active organ that continuously undergoes an orchestrated process of remodeling throughout life. Bone tissue is uniquely capable of adapting to loading, hormonal, and other changes happening in the body, as well as repairing bone that becomes damaged to maintain tissue integrity. On the other hand, diseases such as osteoporosis and metastatic cancers disrupt normal bone homeostasis leading to compromised function. Historically, our ability to investigate processes related to either physiologic or diseased bone tissue has been limited by traditional models that fail to emulate the complexity of native bone. Organ-on-a-chip models are based on technological advances in tissue engineering and microfluidics, enabling the reproduction of key features specific to tissue microenvironments within a microfabricated device. Compared to conventional in-vitro and in-vivo bone models, microfluidic models, and especially organs-on-a-chip platforms, provide more biomimetic tissue culture conditions, with increased predictive power for clinical assays. In this review, we will report microfluidic and organ-on-a-chip technologies designed for understanding the biology of bone as well as bone-related diseases and treatments. Finally, we discuss the limitations of the current models and point toward future directions for microfluidics and organ-on-a-chip technologies in bone research.

Purinergic Signaling Mediates PTH and Fluid Flow-Induced Osteoblast Proliferation

Both parathyroid hormone (PTH) and mechanical signals are able to regulate bone growth and regeneration. They also can work synergistically to regulate osteoblast proliferation, but little is known about the mechanisms how PTH and mechanical signals interact with each other during this process. In this study, we investigated responses of MC3T3-E1 osteoblasts to PTH and oscillatory fluid flow. We found that osteoblasts are more sensitive to mechanical signals in the presence of PTH according to ERK1/2 phosphorylation, ATP release, CREB phosphorylation, and cell proliferation. PTH may also reduce the osteoblast refractory period after desensitization due to mechanical signals. We further found that the synergistic responses of osteoblasts to fluid flow or ATP with PTH had similar patterns, suggesting that synergy between fluid flow and PTH may be through the ATP pathway. After we inhibited ATP effects using apyrase in osteoblasts, their synergistic responses to mechanical stimulation and PTH were also inhibited. Additionally, knocking down P2Y2 purinergic receptors can significantly attenuate osteoblast synergistic responses to mechanical stimulation and PTH in terms of ERK1/2 phosphorylation, CREB phosphorylation, and cell proliferation. Thus, our results suggest that PTH enhances mechanosensitivity of osteoblasts via a mechanism involving ATP and P2Y2 purinergic receptors.

Similitude of cement-bone micromechanics in cemented rat and human knee replacement

A preclinical rat knee replacement model was recently developed to explore the biological and mechanobiological changes of trabecular resorption for cement-bone interdigitated regions. The goal here was to evaluate the relevance of this model compared with human knee replacement with regards to functional micromechanics. Eight nonsurvival, cemented knee replacement surgeries were performed, the interdigitated gap morphology was quantified, and interface micromotion between cement and bone was measured for 1 to 5 bodyweight loading. Computational fluid dynamics modeling of unit cell geometries with small gaps between trabeculae and cement was used to estimate fluid flow. Gap width (3.6 μm) was substantially smaller compared with cement-bone gaps reported in human knee replacement (11.8 μm). Micromotion at the cement-bone border was also decreased for the rat knee replacement (0.48 μm), compared with human (1.97 μm), for 1 bodyweight loading. However, the micromotion-to-gap width ratio (0.19 and 0.22 for, rat and human), and estimated fluid shear stress (6.47 and 7.13 Pa, for rat and human) were similar. Replicating the fluid dynamic characteristics of cement-bone interdigitated regions in human knee replacements using preclinical models may be important to recapitulate trabecular resorption mechanisms due to proposed supraphysiologic fluid shear stress. Statement of clinical significance: local cement-bone micromotion due to joint loading may contribute to the process of clinical loosening in total joint replacements. This work shows that while micromotion and gap morphology are diminished for the rat knee model compared to human, the motion-to-gap ratio, and corresponding fluid shear stress are of similar magnitudes.

Bioreactor cultivation condition for engineered bone tissue: Effect of various bioreactor designs on extra cellular matrix synthesis

Dynamic-based systems are bio-designed in order to mimic the micro-environments of the bone tissue. There is limited direct comparison between perfusion and perfusion-rotation forces in designing a bioreactor. Hence, in current study, we aimed to compare given bioreactors for bone regeneration. Two types of bioreactors including rotating & perfusion and perfusion bioreactors were designed. Mesenchymal stem cells derived from buccal fat pad were loaded on a gelatin/β-Tricalcium phosphate scaffold. Cell-scaffold constructs were subjected to different treatment condition and place in either of the bioreactors. Effect of different dynamic conditions on cellular behavior including cell proliferation, cell adhesion, and osteogenic differentiation were assessed. Osteogenic assessment of scaffolds after 24 days revealed that rotating & perfusion bioreactor led to significantly higher expression of OCN and RUNX2 genes and also greater amount of ALP and collagen I protein production compared to static groups and perfusion bioreactor. Observation of cellular sheets which filled the scaffold porosities in SEM images, approved the better cell responses to rotating & perfusion forces of the bioreactor. The outcomes demonstrated that rotating & perfusion bioreactor action on bone regeneration is much preferable than perfusion bioreactor. Therefore, it seems that exertion of multi-stimuli is more effective for bone engineering.

Perlecan/Hspg2 deficiency impairs bone's calcium signaling and associated transcriptome in response to mechanical loading

Perlecan, a heparan sulfate proteoglycan, acts as a mechanical sensor for bone to detect external loading. Deficiency of perlecan increases the risk of osteoporosis in patients with Schwartz-Jampel Syndrome (SJS) and attenuates loading-induced bone formation in perlecan deficient mice (Hypo). Considering that intracellular calcium [Ca²⁺]_i is an ubiquitous messenger controlling numerous cellular processes including mechanotransduction, we hypothesized that perlecan deficiency impairs bone's calcium signaling in response to loading. To test this, we performed real-time [Ca²⁺]_i imaging on in situ osteocytes of adult murine tibiae under cyclic loading (8N). Relative to wild type (WT), Hypo osteocytes showed decreases in the overall [Ca²⁺]_i response rate (-58%), calcium peaks (-33%), cells with multiple peaks (-53%), peak magnitude (-6.8%), and recovery speed to baseline (-23%). RNA sequencing and pathway analysis of tibiae from mice subjected to one or seven days of unilateral loading demonstrated that perlecan deficiency significantly suppressed the calcium signaling, ECM-receptor interaction, and focal adhesion pathways following repetitive loading. Defects in the endoplasmic reticulum (ER) calcium cycling regulators such as Ryr1/ryanodine receptors and Atp2a1/Serca1 calcium pumps were identified in Hypo bones. Taken together, impaired calcium signaling may contribute to bone's reduced anabolic response to loading, underlying the osteoporosis risk for the SJS patients.

Splicing factor-modulated generation of mechano growth factor regulates physiological processes in osteoblasts under mechanical stimuli

Mechanical stimuli influence various physiological processes in osteoblasts. We previously showed that mechano-growth factor (MGF), a splicing variant of insulin-like growth factor 1, is highly expressed in osteoblasts in response to mechanical stimuli. This study aims to explore the systemic functions of MGF in osteoblasts, and the mechanisms by which mechanical stress regulates the alternative splicing of Igf1 to generate MGF. We found that MGF promoted the proliferation and migration of osteoblasts, while it inhibited their differentiation via Erk1/2 pathway. Furthermore, cyclic stretching upregulated the expression of ASF/SF2, which in turn regulated the expression of MGF. Our findings indicate that mechanical stimuli influence the physiological responses of osteoblasts by increasing the expression of MGF, which is regulated by splicing factors.

Calcium response in bone cells at different osteogenic stages under unidirectional or oscillatory flow

It was found that preosteoblast MC3T3-E1 cells were less responsive in calcium signaling than mature osteocyte MLO-Y4 cells when a steady fluid flow was exerted on a micropatterned cell network. However, the effect of fluid flow on the calcium response in preosteocyte MLO-A5 was seldom investigated. In the present study, MLO-A5 as well as MC3T3-E1 and MLO-Y4 cells were cultured on a regular substrate with high or low density under unidirectional or oscillatory fluid flow. The results showed that calcium oscillation in the cells during late osteogenesis was significantly stronger than during early osteogenesis regardless of the fluid flow type or the presence of a physical cell-cell connection. Calcium oscillation produced by the oscillatory flow in the three types of cells was stronger than that produced by the unidirectional flow, but MC3T3-E1 and MLO-A5 cells exhibited limited potential for calcium oscillation compared with MLO-Y4 cells. After suramin was used to block the binding of extracellular adenosine triphosphate (ATP) to the membrane P2 receptor, the calcium oscillation in the three types of bone cells with or without physical connections was significantly suppressed as a single responsive peak under unidirectional flow. For the ATP-blocking group of low-density cells under oscillatory flow, the number of oscillation peaks in three types of cells was still more than two. It indicates that besides the ATP pathway, other mechanosensitive calcium pathways may exist under oscillatory flow. The present study provided further evidence for the osteogenic stage-dependent calcium response of bone cells under unidirectional or oscillatory fluid flow.

Flow-induced mechanotransduction in skeletal cells

Human body is subject to many and variegated mechanical stimuli, actuated in different ranges of force, frequency, and duration. The process through which cells "feel" forces and convert them into biochemical cascades is called mechanotransduction. In this review, the effects of fluid shear stress on bone cells will be presented. After an introduction to present the major players in bone system, we describe the mechanoreceptors in bone tissue that can feel and process fluid flow. In the second part of the review, we present an overview of the biological processes and biochemical cascades initiated by fluid shear stress in bone cells.

Abl interactor 1: A novel biomarker for osteoporosis in Chinese elderly men

Low bone mineral density (BMD) is a high-risk factor of osteoporosis (OP) and osteoporotic fracture (OF). Peripheral blood monocytes (PBM) can give birth to osteoclasts to resorb bone. Herein, we attempted to identify OP susceptible proteins in human PBM and characterize their functions in bone. Employing the label-free quantitative proteomics methodology (Easy-nLC1000 and Q-exactive) and traditional Western Blotting (WB), we discovered and validated that a key protein, i.e. Abl Interactor 1(ABI1), was significantly down-regulated in PBM in Chinese elderly men with extremely low vs. high BMD (n = 18, p < .05), as well as in OF patients vs. non-fractured (NF) subjects (n = 36, p < .05). The above down-regulation tendency was also observed in Chinese elderly women (n = 51, P < .05). For translational purpose, plasma ABI1 protein was assessed by ELISA in Chinese elderly men, which was found significantly down-regulated in OF (n = 20) vs. NF (n = 64) subjects (Mean: 0.41 vs. 1.03 ng/ml, FC = 0.39, p = .039), as well as in low (n = 32) vs. high (n = 32) BMD subjects (Mean: 0.5 vs. 1.57 ng/ml, FC = 0.32,p = .0012). ROC analyses in another independent study sample (n = 75) showed that the plasma ABI1 protein has superior performance in discriminating osteopenia and healthy subjects (AUC = 0.755, 95% CI: 0.632-0.877, p = .001). Follow-up cellular functional studies revealed that ABI1 protein significantly promoted osteoblast growth (optimal concentration 2.0 ng/ml), osteoblastic gene expression (OPN, ALP, COL1A1, p < .05) and osteoblast differentiation.ABI1 protein also significantly attenuated monocyte trans-endothelial migration and osteoclast differentiation and activity. In conclusion, ABI1 is a novel protein biomarker for OP in Chinese elderly. ABI1 protein, via promoting osteoblast growth, differentiation and activity, and attenuating monocyte trans-endothelial migration and osteoclast differentiation, influences BMD variation and fracture risk in humans. SIGNIFICANCE: Previous plentiful studies indicated that protein ABI1 played an essential role in the progression of several malignancies, including hepatoma, colon cancer and epithelial ovarian cancer. However, there was relatively limited understandings regarding its molecular and cellular functions relevant to bone phenotypes. Employing the label-free quantitative proteomics methodology (Easy-nLC1000 and Q-exactive) and traditional Western Blotting (WB), we discovered and validated that ABI1 was significantly down-regulated in PBM in Chinese elderly men with extremely low BMD as well as in OF patients. The down-regulation trend was consistent in plasma samples in Chinese elderly men. Follow-up cellular functional studies revealed that, on the one hand, ABI1 protein significantly promoted osteoblast growth, osteoblastic gene expression and osteoblast differentiation; on the other hand, it also significantly attenuated monocyte trans-endothelial migration and osteoclast differentiation and activity. It suggested that ABI1 is a promising biomarker with translational value.

Studies on Osteocytes in Their 3D Native Matrix Versus 2D In Vitro Models

PURPOSE OF REVIEW

Osteocytes are responsible for mechanosensing and mechanotransduction in bone and play a crucial role in bone homeostasis. They are embedded in a calcified collagenous matrix and connected with each other through the lacuno-canalicular network. Due to this specific native environment, it is a challenge to isolate primary osteocytes without losing their specific characteristics in vitro. This review summarizes the commonly used and recently established models to study the function of osteocytes in vitro.

RECENT FINDINGS

Osteocytes are mostly studied in monolayer culture, but recently, 3D models of osteocyte-like cells and primary osteocytes in vitro have been established as well. These models mimic the native environment of osteocytes and show superior osteocyte morphology and behavior, enabling the development of human disease models. Osteocyte-like cell lines as well as primary osteocytes isolated from bone are widely used to study the role of osteocytes in bone homeostasis. Both cells lines and primary cells are cultured in 2D-monolayer and 3D-models. The use of these models and their advantages and shortcomings are discussed in this review.

Driving complex flow waveforms with a linear voice coil actuator

Oscillatory and pulsatile fluid flows for use in microfluidic applications were generated using a deformable chamber driven by a low cost linear voice coil actuator. Compliance in the fluidic system originating in the deformable chamber and the fluidic tubing produced a strong frequency dependence in the relationship between the system's input and the output flow rate. The effects of this frequency dependence were overcome by precise system calibration, enabling on-demand generation of sinusoidal oscillations in the fluid flow rate with a controlled amplitude in the range from 0.1 to over 1 ml/min across a frequency range from 0.1 Hz to 10 Hz. The calibration data further enabled the optimization of a multistage exponential smoothing model of the system that allowed the generation of arbitrary complex waveforms. This was demonstrated by combining flow modulation with a constant background flow generated by a syringe pump to mimic the pulsatile flow found in the human vascular system.

Mechanically stimulated osteocytes reduce the bone-metastatic potential of breast cancer cells in vitro by signaling through endothelial cells

Bone metastases occur in 65% to 75% of patients with advanced breast cancer and significantly worsen their survival and quality of life. We previously showed that conditioned medium (CM) from osteocytes stimulated with oscillatory fluid flow, mimicking bone mechanical loading during routine physical activities, reduced the transendothelial migration of breast cancer cells. Endothelial cells are situated at an ideal location to mediate signals between osteocytes in the bone matrix and metastasizing cancer cells in the blood vessels. In this study, we investigated the specific effects of flow-stimulated osteocytes on the interaction between endothelial cells and breast cancer cells in vitro. We observed that CM from flow-stimulated osteocytes reduced endothelial permeability by 15% and breast cancer cell adhesion onto endothelial monolayers by 18%. The difference in adhesion was abolished with anti-intercellular adhesion molecule 1 (ICAM-1) neutralizing antibodies. Furthermore, CM from endothelial cells conditioned in CM from flow-stimulated osteocytes significantly altered the gene expression in bone-metastatic breast cancer cells, as shown by RNA sequencing. Specifically, breast cancer cell expression of matrix metallopeptidase 9 (MMP-9) was downregulated by 62%, and frizzled-4 (FZD4) by 61%, when the osteocytes were stimulated with flow. The invasion of these breast cancer cells across Matrigel was also reduced by 47%, and this difference was abolished by MMP-9 inhibitors. In conclusion, we demonstrated that flow-stimulated osteocytes downregulate the bone-metastatic potential of breast cancer cells by signaling through endothelial cells. This provides insights into the capability of bone mechanical regulation in preventing bone metastases; and may assist in prescribing exercise or bone-loading regimens to patients with breast cancers.

The adaption of the bony microstructure of the human glenoid cavity as a result of long-term biomechanical loading

Structural arrangements of the bony microstructure of a joint through adaptational processes are thought to be determined by the biomechanical demands and its changes. Pursuing this theory of "form follows the biomechanical function", the load distribution of the glenoid cavity, as it is mirrored in its mineralization pattern, should link not only to its thickness distribution, but also will have an impact onto the trabecular network below. To prove and confirm this hypothesis, we analysed the mineral distribution in correlation to the subchondral bone plates thickness and the distribution of architectural parameters of the trabecular network below. Our findings clearly state an inhomogeneous but regular and reproducible mineral distribution pattern in respect to the biomechanical demands and a thickness of the subchondral bone plate which shows a significant correlation (78-93%). As for the trabecular network below, the distribution of the analysed parameters also revealed an inhomogeneous distribution with a regular pattern in correlation to the biomechanical impact. We found distinctive maxima of material distribution and stability (bone volume 79%, plate-like architecture 77%) situated below areas of high long-term load intake. With increasing depth, the trabecular network administers the expression of each structural parameter following the fact that the strain energy gets more and more evenly distributed and changes from a high degree of differentiation just beneath the SBP to a more equal distribution within the deeper areas. After all, the biomechanical situation of a joint directly influences the bony formation of the subchondral bone plate and the trabecular network below.

Finite-Element Syntheses of Callus and Bone Remodeling: Biomechanical Study of Fracture Healing in Long Bones

Computational simulations of fracture healing are a valuable tool to improve fracture treatment and implants. Several finite-element models have been established to predict callus formation due to mechanobiological rules. This work provides a comprehensive simulation for virtual implantation through the combination of callus simulation and finite-element structural synthesis (FESS) of (re-)modeling during and after healing based on Pauwel's theory of histogenesis and Wolff's law. The simulation is based on a linear elastic material model and includes generation of fracture hematoma and initial mesenchymal stem cell concentration out of an unspecified solid, cell proliferation, migration, and differentiation due to mechanical stimuli and time-dependent axial loading. Three nondisplaced femoral shaft fractures with initial interfragmentary movement of 0.2, 0.6, and 1 mm and one fracture with 4 mm translation are modeled. The predictions of interfragmentary movement during fracture healing, healing success, and healing time agree with observed clinical outcome, animal models, and other numerical models. Initial interfragmentary movement between 0.2 and 1 mm leads to healing success, with the fastest healing occurring at 0.2 mm. The model of the dislocated fractures shows no further bending after remodeling and is loaded with physiological stress of -13 MPa. Ideal load-time graphs may give insight into the bone's ability to withstand loads as healing time progresses, and thus holds potential for applications in rehabilitation planning. Better knowledge of the forces present during fracture healing is needed to deploy simulations for surgical planning and manufacturing of patient individualized implants. Anat Rec, 301:2112-2121, 2018. © 2018 Wiley Periodicals, Inc.

Biomechanical Study of the Development of Long Bones: Finite Element Structure Synthesis of the Human Second Proximal Phalanx Under Growth Conditions

Torsional loads are a possible mechanical explanation for the architecture of long bone. Finite element structure synthesis (FESS) has previously successfully been used as a deductive technique using Wolff's Law by applying expected loads to an unspecific homogeneous solid and eliminating stress free parts to verify muscle forces. The extended approach presented in this article includes further mechanobiological rules to model the development from a cartilage model to a finger bone. In contrast to former computational models, simulation of processes leading to both external growth and internal differentiation are included. Combined axial and torsional loads synthesize a complete human secondary proximal phalanx model comparable to form and internal structure to that observed in vivo. While the computational model is very sensitive to initial alterations of loads, changes after growth have a minor effect as observed in animal models. Predictions of cartilage growth and ossification during FESS showed significant similarities to ontogeny indicating the importance of mechanical factors for the morphogenesis of bone during growth. Anat Rec, 302:1389-1398, 2019. © 2018 Wiley Periodicals, Inc.

Physiological cyclic hydrostatic pressure induces osteogenic lineage commitment of human bone marrow stem cells: a systematic study

Background

Physical loading is necessary to maintain bone tissue integrity. Loading-induced fluid shear is recognised as one of the most potent bone micromechanical cues and has been shown to direct stem cell osteogenesis. However, the effect of pressure transients, which drive fluid flow, on human bone marrow stem cell (hBMSC) osteogenesis is undetermined. Therefore, the objective of the study is to employ a systematic analysis of cyclic hydrostatic pressure (CHP) parameters predicted to occur in vivo on early hBMSC osteogenic responses and late-stage osteogenic lineage commitment.

Methods

hBMSC were exposed to CHP of 10 kPa, 100 kPa and 300 kPa magnitudes at frequencies of 0.5 Hz, 1 Hz and 2 Hz for 1 h, 2 h and 4 h of stimulation, and the effect on early osteogenic gene expression of COX2, RUNX2 and OPN was determined. Moreover, to decipher whether CHP can induce stem cell lineage commitment, hBMSCs were stimulated for 4 days for 2 h/day using 10 kPa, 100 kPa and 300 kPa pressures at 2 Hz frequency and cultured statically for an additional 1–2 weeks. Pressure-induced osteogenesis was quantified based on ATP release, collagen synthesis and mineral deposition.

Results

CHP elicited a positive, but variable, early osteogenic response in hBMSCs in a magnitude- and frequency-dependent manner, that is gene specific. COX2 expression elicited magnitude-dependent effects which were not present for RUNX2 or OPN mRNA expression. However, the most robust pro-osteogenic response was found at the highest magnitude (300 kPa) and frequency regimes (2 Hz). Interestingly, long-term mechanical stimulation utilising 2 Hz frequency elicited a magnitude-dependent release of ATP; however, all magnitudes promoted similar levels of collagen synthesis and significant mineral deposition, demonstrating that lineage commitment is magnitude independent. This therefore demonstrates that physiological levels of pressures, as low as 10 kPa, within the bone can drive hBMSC osteogenic lineage commitment.

Conclusion

Overall, these findings demonstrate an important role for cyclic hydrostatic pressure in hBMSCs and bone mechanobiology, which should be considered when studying pressure-driven fluid shear effects in hBMSCs mechanobiology. Moreover, these findings may have clinical implication in terms of bioreactor-based bone tissue engineering strategies.

Electronic supplementary material

The online version of this article (10.1186/s13287-018-1025-8) contains supplementary material, which is available to authorized users.

Transgelin induces dysfunction of fetal endothelial colony-forming cells from gestational diabetic pregnancies

Fetal exposure to gestational diabetes mellitus (GDM) predisposes children to future health complications including hypertension and cardiovascular disease. A key mechanism by which these complications occur is through the functional impairment of vascular progenitor cells, including endothelial colony-forming cells (ECFCs). Previously, we showed that fetal ECFCs exposed to GDM have decreased vasculogenic potential and altered gene expression. In this study, we evaluate whether transgelin (TAGLN), which is increased in GDM-exposed ECFCs, contributes to vasculogenic dysfunction. TAGLN is an actin-binding protein involved in the regulation of cytoskeletal rearrangement. We hypothesized that increased TAGLN expression in GDM-exposed fetal ECFCs decreases network formation by impairing cytoskeletal rearrangement resulting in reduced cell migration. To determine if TAGLN is required and/or sufficient to impair ECFC network formation, TAGLN was reduced and overexpressed in ECFCs from GDM and uncomplicated pregnancies, respectively. Decreasing TAGLN expression in GDM-exposed ECFCs improved network formation and stability as well as increased migration. In contrast, overexpressing TAGLN in ECFCs from uncomplicated pregnancies decreased network formation, network stability, migration, and alignment to laminar flow. Overall, these data suggest that increased TAGLN likely contributes to the vasculogenic dysfunction observed in GDM-exposed ECFCs, as it impairs ECFC migration, cell alignment, and network formation. Identifying the molecular mechanisms underlying fetal ECFC dysfunction following GDM exposure is key to ascertain mechanistically the basis for cardiovascular disease predisposition later in life.

Hydrodynamics in Cell Studies

Hydrodynamic phenomena are ubiquitous in living organisms and can be used to manipulate cells or emulate physiological microenvironments experienced in vivo. Hydrodynamic effects influence multiple cellular properties and processes, including cell morphology, intracellular processes, cell–cell signaling cascades and reaction kinetics, and play an important role at the single-cell, multicellular, and organ level. Selected hydrodynamic effects can also be leveraged to control mechanical stresses, analyte transport, as well as local temperature within cellular microenvironments. With a better understanding of fluid mechanics at the micrometer-length scale and the advent of microfluidic technologies, a new generation of experimental tools that provide control over cellular microenvironments and emulate physiological conditions with exquisite accuracy is now emerging. Accordingly, we believe that it is timely to assess the concepts underlying hydrodynamic control of cellular microenvironments and their applications and provide some perspective on the future of such tools in in vitro cell-culture models. Generally, we describe the interplay between living cells, hydrodynamic stressors, and fluid flow-induced effects imposed on the cells. This interplay results in a broad range of chemical, biological, and physical phenomena in and around cells. More specifically, we describe and formulate the underlying physics of hydrodynamic phenomena affecting both adhered and suspended cells. Moreover, we provide an overview of representative studies that leverage hydrodynamic effects in the context of single-cell studies within microfluidic systems.

Microfluidics approach to investigate the role of dynamic similitude in osteocyte mechanobiology

Fluid flow is an important regulator of cell function and metabolism in many tissues. Fluid shear stresses have been used to level the mechanical stimuli applied in vitro with what occurs in vivo. However, these experiments often lack dynamic similarity, which is necessary to ensure the validity of the model. For interstitial fluid flow, the major requirement for dynamic similarity is the Reynolds number (Re), the ratio of inertial to viscous forces, is the same between the system and model. To study the necessity of dynamic similarity for cell mechanotransduction studies, we investigated the response of osteocyte-like MLO-Y4 cells to different Re flows at the same level of fluid shear stress. Osteocytes were chosen for this study as flows applied in vitro and in vivo have Re that are orders of magnitude different. We hypothesize that osteocytes' response to fluid flow is Re dependent. We observed that cells exposed to lower and higher Re flows developed rounded and triangular morphologies, respectively. Lower Re flows also reduced apoptosis rates compared to higher Re flows. Furthermore, MLO-Y4 cells exposed to higher Re flows had stronger calcium responses compared to lower Re flows. However, by also controlling for flow rate, the lower Re flows induced a stronger calcium response; while degradation of components of the osteocyte glycocalyx reversed this effect. This work suggests that osteocytes are highly sensitive to differences in Re, independent of just shear stresses, supporting the need for improved in vitro flow platforms that better recapitulate the physiological environment. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:663-671, 2018.

Key developments that impacted the field of mechanobiology and mechanotransduction

Advances in mechanobiology have evolved through insights from multiple disciplines including structural engineering, biomechanics, vascular biology, and orthopaedics. In this paper, we reviewed the impact of key reports related to the study of applied loads on tissues and cells and the resulting signal transduction pathways. We addressed how technology has helped advance the burgeoning field of mechanobiology (over 33,600 publications from 1970 to 2016). We analyzed the impact of critical ideas and then determined how these concepts influenced the mechanobiology field by looking at the citation frequency of these reports as well as tracking how the overall number of citations within the field changed over time. These data allowed us to understand how a key publication, idea, or technology guided or enabled the field. Initial observations of how forces acted on bone and soft tissues stimulated the development of computational solutions defining how forces affect tissue modeling and remodeling. Enabling technologies, such as cell and tissue stretching, compression, and shear stress devices, allowed more researchers to explore how deformation and fluid flow affect cells. Observation of the cell as a tensegrity structure and advanced methods to study genetic regulation in cells further advanced knowledge of specific mechanisms of mechanotransduction. The future of the field will involve developing gene and drug therapies to simulate or augment beneficial load regimens in patients and in mechanically conditioning organs for implantation. Here, we addressed a history of the field, but we limited our discussions to advances in musculoskeletal mechanobiology, primarily in bone, tendon, and ligament tissues. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:605-619, 2018.

Relevance of bioreactors and whole tissue cultures for the translation of new therapies to humans

The purpose of this review is to provide a brief overview of bioreactor-based culture systems as alternatives to conventional two- and three-dimensional counterparts. The role, challenges, and future aspirations of bioreactors in the musculoskeletal field (e.g., cartilage, intervertebral disc, tendon, and bone) are discussed. Bioreactors, by recapitulating physiological processes, can be used effectively as part of the initial in vitro screening, reducing that way the number of animal required for preclinical assessment, complying with the 3R principles and, in most cases, allowing working with human tissues. The clinical significance of bioreactors is that, by providing more physiologically relevant conditions to customarily used two- and three-dimensional cultures, they hold the potential to provide a testing platform that is more predictable of a whole tissue response, thereby facilitating the screening of treatments before the initiation of clinical trials. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:10-21, 2018.

Cellular fluid shear stress on implant surfaces-establishment of a novel experimental set up

Background

Mechanostimuli of different cells can affect a wide array of cellular and inter-cellular biological processes responsible for dental implant healing. The purpose of this in vitro study was to establish a new test model to create a reproducible flow-induced fluid shear stress (FSS) of osteoblast cells on implant surfaces.

Methods

As FSS effects on osteoblasts are detectable at 10 dyn/cm², a custom-made flow chamber was created. Computer-aided verification of circulation processes was performed. In order to verify FSS effects, cells were analysed via light and fluorescence microscopy.

Results

Utilising computer-aided simulations, the underside of the upper plate was considered to have optimal conditions for cell culturing. At this site, a flow-induced orientation of osteoblast cell clusters and an altered cell morphology with cellular elongation and alteration of actin fibres in the fluid flow direction was detected.

Conclusions

FSS simulation using this novel flow chamber might mimic the peri-implant situation in the phase of loaded implant healing. With this FSS flow chamber, osteoblast cells’ sensitivity to FSS was verified in the form of morphological changes and cell re-clustering towards the direction of the flow. Different shear forces can be created simultaneously in a single experiment.

Novel device for application of continuous mechanical tensile strain to mammalian cells

During orthodontic tooth movement, the periodontal ligament (PDL) is exposed to continuous mechanical strain. However, many researchers have applied cyclic tensile strain, not continuous tensile strain, to PDL cells in vitro because there has been no adequate device to apply continuous tensile strain to cultured cells. In this study, we contrived a novel device designed to apply continuous tensile strain to cells in culture. The continuous tensile strain was applied to human immortalized periodontal ligament cell line (HPL cells) and the cytoskeletal structures of HPL cells were examined by immunohistochemistry. The expression of both inflammatory and osteogenic markers was also examined by real-time reverse transcription polymerase chain reaction. The osteogenic protein, Osteopontin (OPN), was also detected by western blot analysis. The actin filaments of HPL cells showed uniform arrangement under continuous tensile strain. The continuous tensile strain increased the expression of inflammatory genes such as IL-1β, IL-6, COX-2 and TNF-α, and osteogenic genes such as RUNX2 and OPN in HPL cells. It also elevated the expression of OPN protein in HPL cells. These results suggest that our new simple device is useful for exploring the responses to continuous tensile strain applied to the cells.

Summary: Continuous tensile strain from the device changed the cell morphology and increased the expression of inflammatory and osteogenic gene. These effects were similar to those in the PDL during orthodontic tooth movement.

Oscillatory fluid flow induces the osteogenic lineage commitment of mesenchymal stem cells: The effect of shear stress magnitude, frequency, and duration

A potent regulator of bone anabolism is physical loading. However, it is currently unclear whether physical stimuli such as fluid shear within the marrow cavity is sufficient to directly drive the osteogenic lineage commitment of resident mesenchymal stem cells (MSC). Therefore, the objective of the study is to employ a systematic analysis of oscillatory fluid flow (OFF) parameters predicted to occur in vivo on early MSC osteogenic responses and late stage lineage commitment. MSCs were exposed to OFF of 1Pa, 2Pa and 5Pa magnitudes at frequencies of 0.5Hz, 1Hz and 2Hz for 1h, 2h and 4h of stimulation. Our findings demonstrate that OFF elicits a positive osteogenic response in MSCs in a shear stress magnitude, frequency, and duration dependent manner that is gene specific. Based on the mRNA expression of osteogenic markers Cox2, Runx2 and Opn after short-term fluid flow stimulation, we identified that a regime of 2Pa shear magnitude and 2Hz frequency induces the most robust and reliable upregulation in osteogenic gene expression. Furthermore, long-term mechanical stimulation utilising this regime, elicits a significant increase in collagen and mineral deposition when compared to static control demonstrating that mechanical stimuli predicted within the marrow is sufficient to directly drive osteogenesis.

Flowtaxis of osteoblast migration under fluid shear and the effect of RhoA kinase silencing

Despite the important role of mechanical signals in bone remodeling, relatively little is known about how fluid shear affects osteoblastic cell migration behavior. Here we demonstrated that MC3T3-E1 osteoblast migration could be activated by physiologically-relevant levels of fluid shear in a shear stress-dependent manner. Interestingly, shear-sensitive osteoblast migration behavior was prominent only during the initial period after the onset of the steady flow (for about 30 min), exhibiting shear stress-dependent migration speed, displacement, arrest coefficient, and motility coefficient. For example, cell speed at 1 min was 0.28, 0.47, 0.51, and 0.84 μm min-1 for static, 2, 15, and 25 dyne cm-2 shear stress, respectively. Arrest coefficient (measuring how often cells are paused during migration) assessed for the first 30 min was 0.40, 0.26, 0.24, and 0.12 respectively for static, 2, 15, and 25 dyne cm-2. After this initial period, osteoblasts under steady flow showed decreased migration capacity and diminished shear stress dependency. Molecular interference of RhoA kinase (ROCK), a regulator of cytoskeletal tension signaling, was found to increase the shear-sensitive window beyond the initial period. Cells with ROCK-shRNA had increased migration in the flow direction and continued shear sensitivity, resulting in greater root mean square displacement at the end of 120 min of measurement. It is notable that the transient osteoblast migration behavior was in sharp contrast to mesenchymal stem cells that exhibited sustained shear sensitivity (as we recently reported, J. R. Soc. Interface. 2015; 12:20141351). The study of fluid shear as a driving force for cell migration, i.e., "flowtaxis", and investigation of molecular mechanosensors governing such behavior (e.g., ROCK as tested in this study) may provide new and improved insights into the fundamental understanding of cell migration-based homeostasis.

Construction and in vitro characterization of three-dimensional silk fibroinchitosan scaffolds

The objective of this study was to discuss the construction method, characterization, and biocompatibility of three-dimensional silk fibroin-chitosan (SF-CS) scaffolds which met the requirements of bone tissue engineering scaffolds. Silk fibroin (SF) and chitosan (CS) were mixed at different ratios -3 to 7, 5 to 5, and 7 to 3- to fabricate the composite materials. To find out the optimum mixing ratio of SF and CS, parameters such as pore size, porosity, water absorption, and the mechanical properties were evaluated. Osteoblast cells hFOB1.19 were seeded on SF-CS scaffolds and pure CS scaffolds for the first time. Cell adhesion rate, cell proliferation, and cell activity were evaluated, and cell growth and formation of mineralized nodules were observed. Results showed that SF-CS scaffolds are a suitable candidate for bone tissue engineering.

In Vitro Bone Cell Models: Impact of Fluid Shear Stress on Bone Formation

This review describes the role of bone cells and their surrounding matrix in maintaining bone strength through the process of bone remodeling. Subsequently, this work focusses on how bone formation is guided by mechanical forces and fluid shear stress in particular. It has been demonstrated that mechanical stimulation is an important regulator of bone metabolism. Shear stress generated by interstitial fluid flow in the lacunar-canalicular network influences maintenance and healing of bone tissue. Fluid flow is primarily caused by compressive loading of bone as a result of physical activity. Changes in loading, e.g., due to extended periods of bed rest or microgravity in space are associated with altered bone remodeling and formation in vivo. In vitro, it has been reported that bone cells respond to fluid shear stress by releasing osteogenic signaling factors, such as nitric oxide, and prostaglandins. This work focusses on the application of in vitro models to study the effects of fluid flow on bone cell signaling, collagen deposition, and matrix mineralization. Particular attention is given to in vitro set-ups, which allow long-term cell culture and the application of low fluid shear stress. In addition, this review explores what mechanisms influence the orientation of collagen fibers, which determine the anisotropic properties of bone. A better understanding of these mechanisms could facilitate the design of improved tissue-engineered bone implants or more effective bone disease models.

Synthesis of the New-Type Vascular Endothelial Growth Factor-Silk Fibroin-Chitosan Three-Dimensional Scaffolds for Bone Tissue Engineering and In Vitro Evaluation

The objective of the study was to discuss the biocompatibility of the vascular endothelial growth factor-silk fibroin-chitosan (VEGF-SF-CS) scaffolds. To offer an ideal scaffold for bone tissue engineering, the author added vascular endothelial growth factor (VEGF) into silk fibroin-chitosan (SF-CS) scaffold directly to reconstruct a three-dimensional scaffold for the first time, SF-CS scaffold was loaded with VEGF and evaluated as a growth factor-delivery device. Human fetal osteoblast cell was seeded on the VEGF-SF-CS scaffolds and SF-CS scaffolds. On VEGF-SF-CS and SF-CS scaffolds, the cell adhesion rate was increased as time went on. Scanning electron microscopy: the cells grew actively and had normal multiple fissions, granular and filamentous substrates could be seen around the cells, and cell microfilaments were closely connected with the scaffolds. The cells could not only show the attached growth on surfaces of the scaffolds, but also extend into the scaffolds. Cell Counting Kit-8 and alkaline phosphatase analysis proved that the VEGF could significantly promote human fetal osteoblast1.19 cells growth and proliferation in the SF-CS scaffolds, but the enhancement of osteoblasts cell proliferation and activity by VEGF was dependent on time.