Reversed-phase high-performance liquid chromatography of human growth hormone

Quantitation of the nearest-neighbour effects of amino acid side-chains that restrict conformational freedom of the polypeptide chain using reversed-phase liquid chromatography of synthetic model peptides with L- and D-amino acid substitutions

Side-chain backbone interactions (or "effects") between nearest neighbours may severely restrict the conformations accessible to a polypeptide chain and thus represent the first step in protein folding. We have quantified nearest-neighbour effects (i to i+1) in peptides through reversed-phase liquid chromatography (RP-HPLC) of model synthetic peptides, where L- and D-amino acids were substituted at the N-terminal end of the peptide sequence, adjacent to a L-Leu residue. These nearest-neighbour effects (expressed as the difference in retention times of L- and D-peptide diastereomers at pHs 2 and 7) were frequently dramatic, depending on the type of side-chain adjacent to the L-Leu residue, albeit such effects were independent of mobile phase conditions. No nearest-neighbour effects were observed when residue i is adjacent to a Gly residue. Calculation of minimum energy conformations of selected peptides supported the view that, whether a L- or D-amino acid is substituted adjacent to L-Leu, its orientation relative to this bulky Leu side-chain represents the most energetically favourable configuration. We believe that such energetically favourable, and different, configurations of L- and D-peptide diastereomers affect their respective interactions with a hydrophobic stationary phase, which are thus quantified by different RP-HPLC retention times. Side-chain hydrophilicity/hydrophobicity coefficients were generated in the presence of these nearest-neighbour effects and, despite the relative difference in such coefficients generated from peptides substituted with L- or D-amino acids, the relative difference in hydrophilicity/hydrophobicity between different amino acids in the L- or D-series is maintained. Overall, our results demonstrate that such nearest-neighbour effects can clearly restrict conformational space of an amino acid side-chain in a polypeptide chain.

The perchlorate anion is more effective than the trifluoroacetate anion as an ion-pairing reagent for reversed-phase chromatography of peptides

The addition of salts, specifically sodium perchlorate (NaClO4), to mobile phases at acidic pH as ion-pairing reagents for reversed-phase high-performance liquid chromatography (RP-HPLC) has been generally overlooked. To demonstrate the potential of NaClO4 as an effective anionic ion-pairing reagent, we applied RP-HPLC in the presence of 0-100 mM sodium chloride (NaCl), sodium trifluoroacetate (NaTFA) or NaClO4 to two mixtures of synthetic 18-residue peptides: a mixture of peptides with the same net positive charge (+4) and a mixture of four peptides of +1, +2, +3 and +4 net charge. Interestingly, the effect of increasing NaClO4 concentration on increasing peptide retention times and selectivity changes was more dramatic than that of either NaCl or NaTFA, with the order of increasing anion effectiveness being Cl- << TFA- < C104-. Such effects were more marked when salt addition was applied to eluents containing 10 mM phosphoric acid (H3PO4) compared to 10 mM trifluoroacetic acid (TFA) due to the lesser starting anion hydrophobicity of the former mobile phase (containing the phosphate ion) compared to the latter (containing the TFA- ion).

Use of sodium perchlorate at low pH for peptide separations by reversed-phase liquid chromatography. Influence of perchlorate ion on apparent hydrophilicity of positively charged amino acid side-chains

The reversed-phase liquid chromatography (RPLC) behavior of synthetic model peptides containing positively charged amino acid residues was studied in the presence or absence of 100 mM sodium perchlorate in order to determine the effect on apparent side-chain hydrophilicity of a charged residue at low pH. The peptides used in this study were either non-helical peptides or amphipathic alpha-helical peptides, where the effect of the negatively charged perchlorate ion on a charged residue in either the hydrophobic face or hydrophilic face of the helix was monitored. We have shown that the addition of 100 mM perchlorate to RPLC separations of positively charged peptides performed in a 20 mM aqueous phosphoric acid-acetonitrile system resulted in an increase in retention time of a peptide relative to the same peptide in the absence of perchlorate. This effect occurred independent of conformation, i.e., whether comparing the effect of positively charged residue substitutions in the hydrophobic or hydrophilic face of an amphipathic alpha-helix or in a peptide with negligible secondary structure. From these results, suggesting that positively charged side-chain hydrophilicity is decreased by ion-pairing with the perchlorate ion, we have shown practical examples where mixtures of non-helical and amphipathic alpha-helical peptides showed enhanced resolution in the presence of perchlorate at pH 2, compared to in its absence. In addition, it was shown that an aqueous phosphoric acid-perchlorate-acetonitrile mobile phase may show markedly different selectivity for peptide separations at low pH compared to the more traditional aqueous trifluoroacetic acid-acetonitrile system.

Role of high-performance liquid chromatographic protein analysis in developing fermentation processes for recombinant human growth hormone, relaxin, antibody fragments and lymphotoxin

Development of efficient and reliable fermentation processes for protein pharmaceuticals is aided by the availability of accurate quantitative and qualitative product analyses. We have developed a variety of single and dual column chromatographic separations that meet the needs of process development and examples will be provided of how the resulting data has been used to optimize the culture process. For single column methods, reversed-phase chromatography has been the most versatile, permitting the reliable quantitation of many yeast, Chinese hamster ovary (CHO) cell and Escherichia coli-expressed products in the matrix of culture broth or cell extract. Analysis of secreted human growth hormone synthesized in E. coli, along with clipped and unprocessed forms, will be discussed. Another reversed-phase assay for direct analysis of a peptide product (B-chain relaxin) and its degradation products secreted into E. coli fermentation medium has allowed the purification of the responsible protease. Cation-exchange has proven extremely useful for the direct analysis of antibody fragment synthesized in E. coli, allowing the separation and quantitation of the desired Fab' and Fab'2, as well as the unwanted products of glutathione addition and translational read-through. Assay development is often complicated by the presence of host proteins with chromatographic behavior that is similar to that of the product. Commercial instrumentation now permits the facile development of multidimensional chromatographic assays. We show examples of coupled receptor affinity-reversed-phase assays for a mistranslation product and for covalent multimers of E. coli-synthesized lymphotoxin.

Degradation pathways, analytical characterization and formulation strategies of a peptide and a protein. Calcitonine and human growth hormone in comparison

Peptides and proteins differ from conventional chemical entities in their sensitivity to numerous environmental factors and their susceptibility to different degradation pathways. Therefore, complex analytical methodologies are necessary to characterize their molecular entity as well as to detect and quantify the possible degradation products. The formulation of these molecules for a pharmaceutical product requires stabilization by various excipients. Most of the products are brought to market as solutions or lyophilisates. In the first part, this article presents a comparison between the degradation profile of a peptide (calcitonine) and a protein (human growth hormone), in solution and as a freeze-dried product. The various analytical methods used to characterize and identify the degradation products are reviewed and discussed. The second part contains an overview of the different formulation strategies for calcitonine and human growth hormone. Finally, the different stress conditions used to obtain stability data are discussed critically. This leads on to general comments on the design of stability studies for peptide and protein drugs as pharmaceuticals taking into consideration the official guidelines.

Use of polymeric reversed-phase columns for the characterization of polypeptides extracted from human pancreata. II. Effect of the stationary phase

The potential value of eight commercial available polymer-based reversed-phase (RP) columns for peptide and protein separations was evaluated using crude acetic acid extracts of normal and diabetic human pancreata and mixtures of pure polypeptides as samples. All columns were characterized with acetic acid gradients in water as mobile phase, and different chromatographic profiles were obtained depending on the type of polymer column (bare or derivatized) and the type of ligand. Some of the columns were virtually free from effects related to the polymer skeleton whereas in others the separation was influenced by both the ligand and the polymeric backbone. Two selected polymeric RP columns were, together with a silica-based C4 column, further characterized with acetonitrile gradients in trifluoroacetic acid (TFA), and the separation temperature was found to have a drastic effect on the separation efficiency for proteins with mol. wt. greater than 6000 dalton. No such effect was seen for polypeptides with mol. wt. less than 6000 dalton. Mixtures of pure peptides and proteins were separated using acetic acid gradients in water, acetonitrile or isopropanol, and normally the highest efficiency was found with the use of acetonitrile as mobile phase modifier. Isopropanol was less suitable as an organic modifier. The separation of the beta-lactoglobulin A- and B-chains may be used to give a rapid estimate of the chromatographic usability of polymer-based RP-columns for peptide and protein separations in acetic acid gradients in water and in acetonitrile gradients. Recoveries for insulin, proinsulin, growth hormone, ovalbumin and human serum albumin were measured for several polymer-based RP columns eluted with acetic acid gradients in water and with acetonitrile-based mobile phases. The highest recoveries of serum albumin and ovalbumin were found after elution with acetic acid gradients in water.

Properties of a cleaved two-chain form of recombinant human growth hormone

Escherichia coli cells transformed with plasmids engineered for the expression of recombinant human growth hormone as a secreted product also produced a proteolytically cleaved form of rhGH. This variant is isolated at a high resolution anion exchange chromatography stage during the manufacturing process. The higher isoelectric point of this form is demonstrated by isoelectric focusing and chromatofocusing and the two-chain nature by tryptic mapping, N- and C-terminal sequence analyses, and sodium dodecyl sulfate polyacrylamide gel electrophoresis. These data indicate that the single site of cleavage is between Thr-142 and Tyr-143, in contrast to the two-chain variant isolated from human pituitary glands, which has a clip after residue Phe-139. The recombinant two-chain form was further characterized by reversed-phase high performance liquid chromatography at both acidic and basic pHs. The assay utilizing bicarbonate-containing mobile phases was determined to be the most efficient and sensitive method. The bioactivity of this two-chain form was measured by the in vivo rat weight gain assay and by the in vitro Nb2 cell bioassay. Its immunological similarity to intact one-chain rhGH was demonstrated with an enzyme-linked immunosorbent assay.

Tandem separation schemes for preparative high-performance liquid chromatography of proteins

Preparative chromatography of protein mixtures was carried out by tandem separation schemes involving frontal chromatography followed by stepwise desorption or displacement. In this way, with columns and instruments generally employed in analytical high-performance liquid chromatography, proteins could be purified in quantities similar to those typically separated by a preparative-scale system. A mixture of beta-lactoglobulin A and B was loaded onto an anion-exchange column, and, in the process, a large fraction of the less-retained beta-lactoglobulin B was recovered in pure form. The column was then flushed with the carrier, and subsequent desorption of the substances bound on the stationary phase was carried out by single-step desorption, two-step desorption, or displacement. With this mixture, the last two methods yielded approximately the same results in terms of the amount of product obtained per unit column volume. Whereas stepwise desorption is a simpler technique than displacement, the latter is required for the separation of components having similar adsorption behavior. In another set of experiments, a protein mixture obtained by heat treatment of human growth hormone was fractionated on a reversed-phase column. After loading the column by frontal chromatography, which separated a large fraction of the main product from the other components retained by the column, four desorption steps were applied to recover the individual components. These separation schemes offer an approach to preparative chromatography of proteins that is superior to conventional linear elution in terms of column load capacity, low mobile phase consumption, simultaneous separation and concentration, as well as enrichment of trace components.

Separation of proteins by reversed-phase high-performance liquid chromatography. I. Optimizing the column

In the process of developing a new analytical technology (the chromatophoresis process) which couples reversed-phase high-performance liquid chromatography (HPLC) to sodium dodecyl sulfate polyacrylamide gel electrophoresis in a real-time automated system, it was apparent that improvements in resolving power for the first-dimension (HPLC) separation were necessary. The present paper describes the optimization of the column for our initial work on reversed-phase HPLC separations. Polymeric (polystyrene) packings having particle diameters of 5 micron and pore diameters of 300 A were generally superior in terms of resolution, sample recovery and minimization of "ghosting". Optimum column dimensions were 50 x 1.0 mm I.D. for the flow-rates required in our system (10-100 microliter/min).

Recovery of polypeptides after reversed-phase high-performance liquid chromatography

Mass recovery of individual polypeptides may be estimated under various practical conditions. With the purpose of obtaining rapid and reliable standard procedures for recovery measurements, we have compared five individual methods utilizing a silica-based stationary phase [Nucleosil C18 (7 microns)/ammonium sulphate-perchlorate-acetonitrile, pH 3.0] and a resin-based stationary phase (TSK Phenyl 5 PW RP/ammonium phosphate-acetonitrile, pH 7.0). The recoveries of insulin (6 kilodaltons), human growth hormone (22 kilodaltons) and human serum albumin (68 kilodaltons) estimated under five different experimental conditions were found to be concordant. Variations in column load, flow-rate, gradient shape and column dwell time and addition of cyclame did not increase the (reduced) recovery of serum albumin and growth hormone.