Migration behavior and separation of sulfonamides in capillary zone electrophoresis. I. Influence of buffer pH and electrolyte modifier

Degradation of emerging contaminants by sono-Fenton process with in situ generated H2O2 and the improvement by P25-mediated visible light irradiation

Developing advanced treatment methods to minimize the release of emerging contaminants to natural water has become a matter of considerable interest. Sono-Fenton process was investigated to degrade bisphenol A (BPA) and sulfadiazine (SDZ). The H₂O₂ generated in situ was used as the exclusive source. Results showed that, the 400 kHz ultrasound is more efficient in creating homogeneous sono-Fenton than the 20 kHz apparatus due to the higher production of OH. Influence of Fe²⁺ was more remarkable on the degradation of hydrophilic SDZ, and its degradation kinetics was well fitted by two-stage kinetic model. However, the Fe²⁺ and H₂O₂ were unproductively wasted, which could not be improved by changing the dosing modes of Fe²⁺. The presence of P25 under visible light irradiation could significantly accelerate SDZ degradation at small amount of iron precursors, mainly via promoting the Fe²⁺/Fe³⁺ cycling by the photoelectrons. Moreover, SDZ degradation in sono-Fenton process was significantly inhibited at pH > 7, but the inhibition was very weak in P25-assisted sono-Fenton process. The presence of P25 also improved the mineralization. Three primary degradation pathways of SDZ degradation were proposed, including the attacking of the benzene ring, the oxidation of the amino group and the extrusion of SO₂.

Complexation of sulfamethazine with Cd(II) and Pb(II): implication for co-adsorption of SMT and Cd(II) on goethite

This study quantified the complex stability constants of sulfamethazine (SMT) with cadmium (Cd²⁺) and lead (Pb²⁺) under different pH conditions. The UV-Vis spectrophotometer was used for acquiring the complexation data. Results showed that the complex stability constants of SMT with cadmium (Cd²⁺) and lead (Pb²⁺) increased as a function of the solution pH. In the investigated pH range, Cd²⁺ showed stronger complex affinity with SMT than Pb²⁺. It appeared that cation-π interactions might dominate the complex between SMT with Pb²⁺ and Cd²⁺ at acid environment, and the covalent bonding might play a major role at neutral environment. Batch adsorption equilibrium experiment showed that the sorption capacity of Cd²⁺ on goethite increased from 3.83 to 7.64 mg/g along with the addition of 1 mg/L SMT, indicating SMT can impede the transportation of Cd. In general, this study worked out the complexation constants and clarified the complexation mechanism between SMT with lead and cadmium, while sorption experiment indicated that sorption of Cd onto goethite was enhanced with SMT.

Efficacy of carbonaceous nanocomposites for sorbing ionizable antibiotic sulfamethazine from aqueous solution

This paper investigated the key factors and mechanisms of sulfamethazine (SMT) sorption on a novel carbonaceous nanocomposite, and the effects of harsh aging on SMT sorption in the presence and absence of soil and before as well as after aging. The carbonaceous nanocomposites were synthesized by dip-coating straw biomass in carboxyl functionalized multi-walled carbon nanotubes solution and then pyrolyzed at 300 °C and 600 °C in the absence of air. The sorption performance of high temperature carbonaceous nanocomposite on SMT was excellent, as measured sorption distribution coefficient in the order of 10(3)-10(5.5) L kg(-1). Carbonaceous nanocomposites were aged either alone or mixed with soil via exposure to nutrients and soil extract (biological aging) or 80 °C for 100 d (chemical aging). No obvious effects of harsh aging on SMT sorption were observed in the presence of soil and/or biological and chemical aging. The primary mechanisms for SMT sorption included partition caused by Van der Waals forces and adsorption caused by hydrogen bonding and π-π electron-donor-acceptor interaction. Comprehensively considering the cost, renewability, and the application to real water samples, the carbonaceous nanocomposites have potential in removal of SMT and possibly other persistent organic pollutants from wastewater.

A new class of perfluorinated acid contaminants: primary and secondary substituted perfluoroalkyl sulfonamides are acidic at environmentally and toxicologically relevant pH values

The SPARC software program was validated for nitrogen-hydrogen acidity constant estimation of primary and secondary sulfonamides against a broad suite of substituted derivatives with experimental datasets in water and dimethylsulfoxide solvent systems and across a wide pK(a) range. Following validation, amidic proton pK(a) values were estimated for all C(1) through C(8) congeners of five major perfluoroalkyl sulfonamide classes: unsubstituted sulfonamides, N-methyl and N-ethyl sulfonamides, sulfonamidoethanols, and sulfonamidoacetates. Branching of the perfluoroalkyl chain is expected to have substantial impacts on amide moiety acidity in these contaminant groups, with intrahomologue variability of up to four pK(a) units and increasing pK(a) values with both increasing chain branching and greater proximity of the chain branching to the sulfonamide head group. Perfluoroalkyl chain length is not predicted to have a substantial influence on sulfonamide acidity. The predicted pK(a) values and variability are anticipated to have substantial impacts on the environmental partitioning and degradation of these compounds, as well as the modes and magnitudes of toxicological effects. Substantial pH dependent isomeric fractionation of perfluoroalkyl sulfonamides is expected both in situ and in vivo, necessitating the incorporation of amide group acidities in multimedia environmental models and pharmacokinetic studies.

Application of capillary zone electrophoresis with large-volume sample stacking to the sensitive determination of sulfonamides in meat and ground water

A CZE method with UV-Vis detection has been established and validated for the determination of nine sulfonamides: sulfapyridine, sulfamethazine, sulfamerazine, sulfamether, sulfadiazine, sulfadimethoxine, sulfamethoxazole, sulfachlorpyridazine, and sulfamethizole. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 45 mM sodium phosphate and 10% methanol at pH 7.3, with temperature and voltage of 27 degrees C and 25 kV, respectively. p-Aminobenzoic acid was used as an internal standard . Taking into account the lack of sensitivity of the UV-Vis detection, the application of an on-line preconcentration methodology, such as large-volume sample stacking with polarity switching has been proposed. This procedure combined with a solvent extraction/SPE method applied for off-line preconcentration and cleanup provides a significant improvement in the LODs, ranging from 2.59 to 22.95 mug/L for the studied compounds; the quantification of these residues being possible below the levels established by EU legislation in animal food products, such as meat. Satisfactory recoveries were also obtained in the analysis of these compounds in ground water.

Analysis of sulphonamide residues in edible animal products: A review

The methods of analysis for sulphonamide residues in edible animal products are reviewed. Sulphonamides are widely used for therapeutic and prophylactic purposes in both humans and animals, sometimes as growth promoters as additives in animal feed. As a result of their widespread use, there is concern about whether the levels used of these drugs can generate serious problems in human health, e.g., allergic or toxic reactions. Several methods for the determination of sulphonamides have been reported in the literature and this review considers high-performance liquid chromatography (HPLC), liquid chromatography-mass spectrometry (LC/MS), gas chromatography (GC), thin-layer chromatography (TLC), high-performance capillary electrophoresis (HPCE), enzyme-linked immunosorbant assay (ELISA), biosensor immunoassay (BIA) and microbiological methods. Specific aspects of analysing sulphonamides, such as sample handling, chromatographic conditions and detection methods are discussed. Methods for drug residue monitoring should be accurate, simple, economical in both time and cost, and capable of detecting residues below the maximum residue limits (MRL). The current sulphonamide detection technologies are based on chromatographic methods or bacteriological growth inhibition. The instrumental methods such as HPLC and GC are both sensitive and specific, but are laborious and expensive. Because of the labour-intensive processes, only a few cases of GC methods applied to residue analysis have been published. These methods are suitable for confirmation but not for screening of large numbers of samples. Microbiological methods do not require highly specialized and expensive equipment. They also use highly homogeneous cell populations for testing and thus result in better assay precision. Although HPCE has powerful separation ability, the precision is poor and the instrument still needs to be improved. To date, this technique has not been widely applied to routine analysis. Currently, TLC has been almost replaced by other instrumental analysis. A rapid, sensitive and specific assay is required to detect positive samples in routine analysis, which can then be confirmed for the presence of sulphonamides by HPLC. Immunochemical methods such as ELISA can be simple, rapid and cost-effective, with enough sensitivity and specificity to detect small molecules. This review can be considered as a basis for further research aimed at identifying the most efficient approaches.

Enantiomeric separation of gemfibrozil chiral analogues by capillary electrophoresis with heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin as chiral selector

The enantiomeric separation of gemfibrozil chiral analogues was performed by capillary zone electrophoresis (CZE). Resolution of the enantiomers was achieved using heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD) as chiral selector dissolved into a buffer solution. In order to optimize the separation conditions, type, pH and concentration of running buffer and chiral selector concentration were varied. For each pH value, the optimum chiral selector concentration that produced the resolution of the isomers was found. The migration order of labile diastereoisomers formed was valued at the optimum experimental conditions by adding a pure optical isomer to the racemic mixture. Data from 1H NMR studies confirmed host-guest interaction between TM-beta-CD and 5-(2,5-dimethylphenoxy)-2-ethylpentanoic acid sodium salt. The hypothesized stoichiometry host:guest was 1:1. An apparent equilibrium constant (Ka) was estimated monitoring the chemical shift variation as a function of TM-beta-CD concentration. Salt effect on complexation equilibrium constant was also investigated.

Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.

Analysis of rhubarb anthraquinones and bianthrones by microemulsion electrokinetic chromatography

In this work a method of microemulsion electrokinetic chromatography (MEEKC) has been developed for the analysis of nine anthraquinones and bianthrones in rhubarb. This study employed di-n-butyl tartrate as oil substance to make up the microemulsion. The composition of the microemulsion was 0.5% (w/w) di-n-butyl tartrate, 0.6% (w/w) SDS, 1.2% (w/w) 1-butanol and 97.7% (w/w) 10 mM sodium borate buffer, pH of the buffer being 9.2. Acetonitrile was added to the emulsion to improve the separation. The volume ratio between the emulsion solution and acetonitrile of an optimized separation was 70:30. With the optimized conditions all of the nine analytes were baseline-separated in peaks of good shapes within 20 min. After validation the method was used to analyze the components in a rhubarb sample. A solid-phase extraction procedure was employed. Five anthraquinones and two bianthrones had been detected in the sample and their amounts were determined. The method should be able to be used for the quantitative analysis of the main active components of rhubarb crude drugs.

Separation and migration behavior of structurally related phenothiazines in cyclodextrin-modified capillary zone electrophoresis

The influences of buffer pH and the concentration of beta-cyclodextrins (beta-CDs) on the separation and migration behavior of 13 structurally related phenothiazines in CD-modified capillary zone electrophoresis (CD-CZE) using a phosphate background electrolyte at low pH were investigated. We focused on the separation of these phenothiazines, including the enantiomers of chiral analytes, with the use of beta-CD and hydroxypropyl-beta-CD (HP-beta-CD) as electrolyte modifiers or chiral selectors at concentrations less than 8 mM. The results indicate that the interactions of phenothiazines with beta-CDs are very strong and that effective separations of 13 analytes can be achieved with addition of 0.3 mM beta-CD or 0.5 mM HP-beta-CD in a phosphate buffer at pH 3.0. Binding constants of phenothiazines to beta-CDs were evaluated for a better understanding of the interactions of phenothiazines with beta-CDs.

Prediction of electrophoretic mobilities of sulfonamides in capillary zone electrophoresis using artificial neural networks

Artificial neural networks (ANNs) were successfully developed for the modeling and prediction of electrophoretic mobility of a series of sulfonamides in capillary zone electrophoresis. The cross-validation method was used to evaluate the prediction ability of the generated networks. The mobility of sulfonamides as positively charged species at low pH and negatively charged species at high pH was investigated. The results obtained using neural networks were compared with the experimental values as well as with those obtained using the multiple linear regression (MLR) technique. Comparison of the results shows the superiority of the neural network models over the regression models.

Determination of sulfametoxazole, sulfadiazine and associated compounds in pharmaceutical preparations by capillary zone electrophoresis

A capillary zone electrophoresis method is presented to separate sulfadiazine, sulfamethoxazole, trimethoprim, bromhexine and guaiacol by using a fused-silica capillary (60.2 cm x 75 microm I.D.). The separation was carried out at 30 kV and 25 degrees C in a 15 mM phosphate buffer adjusted to pH 6.2 as electrolyte. Under these conditions, the run time was 6 min and the limits of quantification were about 1 mg/l for every component. The method was applied to pharmaceutical preparations and the results provided recoveries close to 100%.

Capillary electrophoresis of drugs: current status in the analysis of pharmaceuticals

The current status of capillary electrophoresis (CE) in pharmaceutical analyses is reviewed with about 300 references, mainly from 1996 until 1999. This article covers the use of CE for assay and purity determination of the main component, analysis of natural medicines, antisense DNA, peptides, and proteins. Analysis of hydrophobic and/or electrically neutral drugs by electrokinetic chromatography, capillary electrochromatography and nonaqueous CE is critically evaluated. Detailed techniques for the separation of enantiomers are given in the text with some actual applications. Furthermore, this review includes sensitivity and regulatory aspects for the actual use of CE in new drug applications (NDA). The analytical validation required for CE in NDA is also treated.

Salt effects in capillary zone electrophoresis. IV. Resolution versus time and the effect of potassium phosphate and its concentration in the high ionic strength separation of sulphonamides

The effects of potassium phosphate buffer and its concentration upon the capillary zone electrophoretic separation of 23 sulphonamides and a neutral marker were examined at pH 7. The resolution between the pairs was improved with the increased concentration of the buffer from 65 mM to 174 mM. Nineteen sulphonamides, a hydrolysis product and several unidentified minor components were baseline resolved in both 101 and 138 mM phosphate buffers. In 174 mM buffer all 21 ionised sulphonamides and the other compounds were separated. A simple relationship between the resolution of analyte pairs (Rs) and the square root of the mean analysis time for the pair (square root of tapp) was derived, but few of the pairs displayed this behaviour. For the majority of pairs of compounds, Joule heating appeared to cause a maximum in the Rs versus square root of tapp relationship, while non-ideality and shifts in ionisation with increasing salt concentration appeared dominant in other cases.

Separation of the glucuronides of entacapone and its (Z)-isomer in urine by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatography (MECC) method was developed for the separation of the 3-O-glucuronides of entacapone and its (Z)-isomer, the two main urinary metabolites of entacapone in humans. Entacapone is a novel, potent inhibitor of catechol-O-methyltransferase (COMT) intended for use as an adjunct in the treatment of Parkinson's disease. Urine samples spiked with synthetic 3-O-glucuronides were used to study the effects of running buffer pH, composition and applied voltage on separation of the closely migrating glucuronides. The 3-O-glucuronide of nitecapone, was used as internal standard. The greatest improvement in separation was achieved by increasing the running buffer ionic concentration. Changes in pH had little effect on the separation, whereas increase in sodium dodecyl sulfate (SDS) concentration slightly improved resolution. Baseline separation and good selectivity relative to urine components were achieved by using a phosphate (25 mM)-borate (50 mM)-SDS (20 mM) running buffer, pH 7.0, in a 75 microm x 60/67 cm fused-silica capillary at 15 kV and a 335 nm cut-off filter in the UV detector. The limits of detection (LOD) at a signal-to-noise ratio of 3 were about 0.25 microg/ml (5.2 x 10(-7) M) (injection 0.5 p.s.i./8 s). The linear detection range was 2-100 microg/ml (r2>0.999). Good repeatability of injection and relative migration times were obtained.

Migration behavior and selectivity of sulfonamides in capillary electrophoresis

The migration behavior and selectivity of thirteen sulfonamides in capillary electrophoresis (CE), with emphasis on micellar electrokinetic chromatography (MEKC) were systematically investigated using a phosphate-borate buffer electrolyte, with sodium dodecyl sulfate (SDS) as an anionic surfactant in MEKC. The optimization strategies for the separation of sulfonamides in capillary zone electrophoresis (CZE) and in MEKC are described. The migration behavior and selectivity of sulfonamides in CZE are mainly manipulated by the pH of the buffer. The migration order of sulfonamides depends on the ratios of charge to mass (q/M2/3) and is primarily determined by their pKa values. Thus precise optimization of buffer pH is crucial to further improve the separation of some closely migrating sulfonamides. On the other hand, buffer pH and micelle concentration greatly affect the migration and selectivity of sulfonamides in MEKC. The migration order of sulfonamides is mainly determined by their pKa values and the magnitude of the binding constants of solutes-to-micelles. The influences of buffer pH and micelle concentration correlate with each other. The magnitude of the binding constants correlates with the differences between the electrophoretic mobility of sulfonamides measured at a pH below pKa-2 in CZE and that in MEKC. In this work, acid dissociation constants of these sulfonamides and binding constants of sulfonamides to SDS micelles in a phosphate-borate buffer are reported.

Analysis of antibiotics by capillary electrophoresis

The broad category of antibiotics encompasses some of the most widely prescribed pharmaceuticals in the world. As is the case with any pharmaceutical, an antibiotic must be characterized in terms of its potency or activity, and the presence and quantity of impurities. Additionally, any residue or metabolite that may be present as a result of its use must be monitored. Many capillary electrophoretic techniques have been utilized in the analysis of antibiotics, addressing the various aspects of their quantitation, profiling, and monitoring. Some of the more recent applications are summarized in this review article.

Capillary electrophoretic separations of enantiomers using cyclodextrin-containing background electrolytes

The 1996 primary literature papers which deal with the separation of enantiomers using cyclodextrins are reviewed here. Though the majority of the papers still use the neutral native cyclodextrins or the neutral derivatized cyclodextrins as resolving agents, there was a significant increase in number of separations which relied on charged cyclodextrins, both weak electrolytes and strong electrolytes, as resolving agents. Also, there was an increase in the number of papers which reported binding constants and correlated them with other physical or chemical characteristics of the analytes. Several successful minor enantiomer determinations were presented, pushing the reliable quantitation levels below 0.1%. Work continued on the simultaneous use of neutral and charged cyclodextrins to improve separation selectivity or peak resolution.