Simultaneous determination of polycarboxylic acids by capillary electrophoresis with a copper electrode

Simultaneous chemiluminescence determination of citric acid and oxalic acid using multi-way partial least squares regression

A novel kinetic chemiluminescent method proposed for the simultaneous determination of oxalic acid and citric acid in their mixtures.

Determination of alpha hydroxy acids in fruits by capillary electrophoresis

Alpha hydroxy acids, malic acid, citric acid, tartaric acid, glycolic acid and lactic acid, were analyzed simultaneously using capillary electrophoresis with direct UV detection at 200 nm. The separation was carried out with uncoated fused-silica (50 cm x 50 microns i.d.), pressure injection at 15 psi s and operated at -15 kV potential. The separation buffers were prepared with 180 mM Na2HPO4, 1 mM cetyltrimethylammonium bromide and 15% (v/v) methanol and adjusted to pH 7.2 by phosphoric acid. Validation was performed for citric acid and malic acid. The obtained parameters were adequate and the limits of detection were 2.5 and 5 micrograms ml-1 for citric acid and malic acid, respectively. AHAs from natural fruit juices (orange and grape) were determined and measured with this method.

Modeling and optimization of the chiral selectivity of basic analytes in chiral capillary electrophoresis with negatively charged cyclodextrins using electrochemical detection

A mathematical model concerning the separation selectivity of basic analytes in chiral capillary electrophoresis (CE) modified with negatively charged cyclodextrins (CDs) has been presented to describe the dependence of chiral selectivity on the buffer pH and the chiral selector concentration. The electrophoretic method to determine the parameters of the model has also been developed. The model has been tested with racemic epinephrine and isoproterenol as target analytes and sulfonated beta-CD as chiral selector. The agreements have been found between the calculated and the measured values. Some significant conclusions to optimize chiral CE separation have been derived from the model and proven by the experiments. Electrochemical detection was used to meet the requirement of the low introduced concentration of analytes.

Determination of electroactive organic acids by anion-exchange chromatography using a copper modified electrode

An ion-chromatographic method combined with electrochemical detection at a copper-based chemically modified glassy carbon electrode (Cu-GC) has been shown to provide a simple analytical approach for the determination of some common organic acids in alkaline medium. Under the optimized isocratic chromatographic conditions (i.e. 0.1 M NaOH plus 80 mM CH3COONa), organic acids such as gallic, ascorbic, gluconic, lactobionic, galacturonic and glucuronic acid could be separated in less than 20 min. Under constant potential amperometric detection (i.e. 0.55 V vs. Ag-AgCl) the Cu-GC modified electrode allowed detection limits between 2 and 5 pmol for all investigated organic acids while the linear dynamic range spanned generally over three orders of magnitude. Examples of applications included the separation and quantitation of some common organic acids in vinegar, honey and tea samples, are given.

Study of a novel cationic calix[4]arene used a selectivity modifier in capillary electrophoresis with electrochemical detection

The use of a novel cationic calixarene, p-(quaternary ammonium) calix[4]arene, as selectivity modifier in capillary electrophoresis coupled with electrochemical detection was reported. The calixarene displayed good selectivity for the positional isomers of benzenediol and aminophenol and their successful separation was obtained under optimum conditions. The interaction mechanism between p-(quaternary ammonium) calix[4]arene and the solutes is discussed using the molecular modeling method. The detection limits by electrochemical detection for the most solutes studied here were below picogram level, which was approximately 2 orders of magnitude lower than those reported in the literature using UV detection. The results showed that electrochemical detection is especially suitable for an electrophoresis system where calixarenes are used as modifier.

Applications of a copper microparticle-modified carbon fiber microdisk array electrode for the simultaneous determination of aminoglycoside antibiotics by capillary electrophoresis

A copper microparticle-modified carbon fiber microdisk array electrode was fabricated and employed in capillary electrophoresis for the simultaneous determination of the five aminoglycoside antibiotics (AGs) including netilmicin, tobramycin, lincomycin, kanamycin and amikacin. The array electrode exhibited high catalytic activity for AGs, good reproducibility and stability. Under the optimum separation conditions (separation voltage of 6.2 kV, electrophoretic medium of 125 mM NaOH), the five AGs above were baseline separated within 20 min. At a working electrode potential of 0.7 V (versus saturated calomel electrode), the calibration curves were linear over two orders of magnitude of concentration, and the detection limits (SIN=3) were below 2 microM except for lincomycin (6.7 microM). The developed method was successfully employed for the simultaneous determination of the five AGs studied in pharmaceutical injections. The feasibility of this method for the simultaneous determination of lincomycin, kanamycin and amikacin in urine sample was also demonstrated.