Improved systems for hydrophobic tagging of recombinant immunogens for efficient iscom incorporation

Preclinical developments in the delivery of protein antigens for vaccination

INTRODUCTION

Vaccine technology has constantly advanced since its origin. One of these advancements is where purified parts of a pathogen are used rather than the whole pathogen. Subunit vaccines have no chance of causing disease; however, alone these antigens are often poorly immunogenic. Therefore, they can be paired with immune stimulating adjuvants. Further, subunits can be combined with delivery strategies such as nano/microparticles to enrich their delivery to organs and cells of interest as well as protect them from in vivo degradation. Here, we seek to highlight some of the more promising delivery strategies for protein antigens.

AREAS COVERED

We present a brief description of the different types of vaccines, clinically relevant examples, and their disadvantages when compared to subunit vaccines. Also, specific preclinical examples of delivery strategies for protein antigens.

EXPERT OPINION

Subunit vaccines provide optimal safety given that they have no risk of causing disease; however, they are often not immunogenic enough on their own to provide protection. Advanced delivery systems are a promising avenue to increase the immunogenicity of subunit vaccines, but scalability and stability can be improved. Further, more research is warranted on systems that promote a mucosal immune response to provide better protection against infection.

Achieving directed immunostimulating complexes incorporation

In recent years, several studies have been reported with the common aim of generating general expression systems for straightforward production and subsequent coupling of expressed antigens to an adjuvant system. Here, we describe a series of such efforts with a common theme of using gene fusion technology for association of recombinant antigens to immunostimulating complexes (iscoms). In the early stages of vaccine development, uniform antigen preparations are crucial to allow the comparison of immune responses to different antigens, or even subdomains thereof, and we believe that the described systems constitute an important development in this context.

A novel adjuvant-free H fusion system for the production of recombinant immunogens in Escherichia coli: Its application to a 12 kDa antigen from Cryptosporidium parvum

The production of recombinant antigens in Escherichia coli and specific polyclonal antibodies for diagnosis and therapy is still a challenge for world-wide researchers. Several different strategies have been explored to improve both antigen and antibody production, all of them depending on a successful expression and immunogenicity of the antigen. Gene fusion technology attempted to address these challenges: fusion partners have been applied to optimize recombinant antigen production in E. coli, and to increase protein immunogenicity. Taking a 12-kDa surface adhesion antigen from Cryptosporidium parvum (CP12) by example, the novel H fusion partner was presented in this work as an attractive option for the development of recombinant immunogens and its adjuvant-free immunization. The H tag (of only 1 kDa) efficiently triggered a CP12-specific immune response, and it also improved the immunization procedure without requiring co-administration of adjuvants. Moreover, polyclonal antibodies raised against the HCP12 fusion antigen detected native antigen structures displayed on the surface of C. parvum oocysts. The H tag proved to be an advanced strategy and promising technology for the diagnosis and therapy of C. parvum infections in animals and humans, allowing a rapid and simple recombinant production of the CP12 antigen.

A comparison of pseudo-ternary diagrams of aqueous mixtures of Quil A, cholesterol and phospholipid prepared by lipid-film hydration and dialysis

Pseudo-ternary diagrams for Quil A, phospholipid (phosphatidylcholine (PC) or phosphatidylethanolamine (PE)) and cholesterol were established in order to identify combinations that result in the formation of immune-stimulating complex (ISCOM) matrices and other colloidal structures produced by these three components in aqueous systems following lipid-film hydration or dialysis (methods that can be used to produce ISCOMs). In addition, the effect of equilibration time (1 month at 4°C) on the structures formed by the various combinations of the three components was investigated. Depending on the ratio of Quil A, cholesterol and phospholipid, different colloidal particles, including ISCOM matrices, liposomes and ring-like micelles, were found irrespective of the preparation method used. In contrast, worm-like micelles were only observed in systems prepared by lipid-film hydration. For samples prepared by dialysis, ISCOM matrices were predominantly found near the Quil A apex of the pseudo-ternary diagram (> 50% Quil A). On the other hand, for samples prepared by lipid-film hydration, ISCOM matrices were predominantly found near the phospholipid apex of the pseudo-ternary diagram (> 50% phospholipid). The regions in the pseudo-ternary diagrams in which ISCOM matrices were observed increased following an extended equilibration time, particularly for samples prepared by lipid-film hydration. Differences were also observed between pseudoternary diagrams prepared using either PE or PC as phospholipids.

Immune response of BALB/c mouse immunized with recombinant MSPs proteins of Anaplasma marginale binding to immunostimulant complex (ISCOM)

Anaplasmosis, caused by Anaplasma marginale, results in significant economic losses of cattle in tropical and subtropical regions worldwide. Six major surface proteins (MSPs) were well characterized and designated as MSP1, MSP2, MSP3, MSP4, and MSP5. The objective of this study was to evaluate the humoral immune response of BALB/c mice against the recombinant MSPs, incorporated into immunostimulating complex (ISCOM). The recombinant proteins purified by Ni-NTA columns were incorporated into ISCOM and ISCOMATRIX by the lipid film hydration method. BALB/c mice immunized with ISCOM/rMSPs and ISCOMATRIX/rMSPs vaccines produced whole IgG, IgG1, and IgG2a, in contrast to the negative groups (PBS and ISCOMATRIX adjuvant). All groups that received antigen responded specifically against the rMSPs by Western blotting, showing the rMSP1a (60-105kDa), rMSP1b (100kDa), rMSP4 (47kDa), and rMSP5 (29kDa). Additional studies will have to be performed in cattle to evaluate the humoral and cellular mechanisms of this subunit vaccine and their possible use as protective vaccines against homologous and heterologous strains of A. marginale.

On the preparation, microscopic investigation and application of ISCOMs

ISCOM matrices constitute colloidal structures formed from Quillaja saponins, cholesterol and phospholipid. Addition of protein antigens to these matrices leads to the formation of ISCOMs. In this review we report on microscopic investigations of ISCOM matrices and ISCOMs as well as related colloidal structures, such as helices, worm-like micelles, ring-like micelles, and lamellae structures. We briefly outline the immunologic basis for the use of ISCOMs as vaccine delivery systems, and describe the various methods to form ISCOMs. Negative staining transmission electron micrographs of all colloidal structures are presented and described. On the basis of our microscopic investigations, different formation mechanisms of ISCOMS are discussed.

Cationic cage-like complexes formed by DC-cholesterol, Quil-A, and phospholipid

This study describes the formation of cationic, cage-like complexes which have a structure similar to classic anionic ISCOMs. In order to prepare these complexes cholesterol, a major component of classic ISCOM formulations, was substituted with a cationic derivative, 3beta-[N-(N',N'-dimethylaminoethane)-carbamoyl]-cholesterol (DC-CHOL). Colloidal dispersions with varying compositions of DC-CHOL, phosphatidylcholine, and Quil-A, which is a mixture of anionic triterpene saponins, were prepared by the lipid-film hydration method and characterised by transmission electron microscopy and laser Doppler electrophoresis. The colloidal structures obtained are presented in pseudo-ternary phase diagrams with two buffer systems as the pseudo-component. It was found that the formation of cationic, cage-like particles is highly depending on the formulation buffer. With TRIS buffered saline (TBS) pH 7.4, cage-like particles formed at compositions with high proportions of DC-CHOL and had a strongly positive zeta-potential. These could be purified by differential centrifugation. With phosphate buffered saline pH 7.4, the formation of cage-like particles was much reduced. It was shown that the formation of cage-like particles with a positive charge depended on suitable concentrations of TRIS in the hydration buffer.

Pseudo-ternary phase diagrams of aqueous mixtures of Quil A, cholesterol and phospholipid prepared by the lipid-film hydration method

Pseudo-ternary phase diagrams of the polar lipids Quil A, cholesterol (Chol) and phosphatidylcholine (PC) in aqueous mixtures prepared by the lipid film hydration method (where dried lipid film of phospholipids and cholesterol are hydrated by an aqueous solution of Quil A) were investigated in terms of the types of particulate structures formed therein. Negative staining transmission electron microscopy and polarized light microscopy were used to characterize the colloidal and coarse dispersed particles present in the systems. Pseudo-ternary phase diagrams were established for lipid mixtures hydrated in water and in Tris buffer (pH 7.4). The effect of equilibration time was also studied with respect to systems hydrated in water where the samples were stored for 2 months at 4 degrees C. Depending on the mass ratio of Quil A, Chol and PC in the systems, various colloidal particles including ISCOM matrices, liposomes, ring-like micelles and worm-like micelles were observed. Other colloidal particles were also observed as minor structures in the presence of these predominant colloids including helices, layered structures and lamellae (hexagonal pattern of ring-like micelles). In terms of the conditions which appeared to promote the formation of ISCOM matrices, the area of the phase diagrams associated with systems containing these structures increased in the order: hydrated in water/short equilibration period<hydrated in buffer/short equilibration period<hydrated in water/prolonged equilibration period. ISCOM matrices appeared to form over time from samples, which initially contained a high concentration of ring-like micelles suggesting that these colloidal structures may be precursors to ISCOM matrix formation. Helices were also frequently found in samples containing ISCOM matrices as a minor colloidal structure. Equilibration time and presence of buffer salts also promoted the formation of liposomes in systems not containing Quil A. These parameters however, did not appear to significantly affect the occurrence and predominance of other structures present in the pseudo-binary systems containing Quil A. Pseudo-ternary phase diagrams of PC, Chol and Quil A are important to identify combinations which will produce different colloidal structures, particularly ISCOM matrices, by the method of lipid film hydration. Colloidal structures comprising these three components are readily prepared by hydration of dried lipid films and may have application in vaccine delivery where the functionality of ISCOMs has clearly been demonstrated.

Applications of novel affinity cassette methods: use of peptide fusion handles for the purification of recombinant proteins

In this article, recent progress related to the use of different types of polypeptide fusion handles or 'tags' for the purification of recombinant proteins are critically discussed. In addition, novel aspects of the molecular cassette concept are elaborated, together with areas of potential application of these fundamental principles in molecular recognition. As evident from this review, the use of these concepts provides a powerful strategy for the high throughput isolation and purification of recombinant proteins and their derived domains, generated from functional genomic or zeomic studies, as part of the bioprocess technology leading to their commercial development, and in the study of molecular recognition phenomena per se. In addition, similar concepts can be exploited for high sensitivity analysis and detection, for the characterisation of protein bait/prey interactions at the molecular level, and for the immobilisation and directed orientation of proteins for use as biocatalysts/biosensors.

In vivo and in vitro lipidation of recombinant immunogens for direct iscom incorporation

We have previously reported strategies for Escherichia coli production of recombinant immunogens fused to hydrophobic tags to improve their capacity to be incorporated into an adjuvant formulation (J. Immunol. Methods 222 (1999) 171; 238 (2000) 181). Here, we have explored the possibility to use in vivo or in vitro lipidation of recombinant immunogens as means to achieve iscom incorporation through hydrophobic interaction. For the in vivo lipidation strategy, a general expression vector was constructed encoding a composite tag consisting of a sequence (lpp) of the major lipoprotein of E. coli, fused to a dual affinity fusion tag to allow efficient recovery by affinity chromatography. Upon expression in E. coli, fatty acids would be linked to the produced gene products. To achieve in vitro lipidation, the target immunogen would be expressed in frame with an N-terminal His6-ABP affinity tag, in which the hexahistidyl tag was utilized to obtain lipidation via a Cu2+-chelating lipid. A 238 amino acid segment DeltaSAG1, from the central region of the major surface antigen SAG1 of Toxoplasma gondii, served as model immunogen in this study. The two generated fusion proteins, lpp-His6-ABP-DeltaSAG1 and His6-ABP-DeltaSAG1, both expressed at high levels (approximately 5 and 100 mg/l, respectively), could be recovered to high purity by ABP-mediated affinity chromatography, and were evaluated in iscom-incorporation experiments. The His6-ABP-DeltaSAG1 fusion protein was associated to iscom matrix with pre-incorporated chelating lipid. Both fusion proteins were found in the iscom fractions after analytical ultracentrifugation in a sucrose gradient, indicating successful iscom incorporation/association. Iscom formation was further supported by electron microscopy analysis. In addition, these iscom preparations were demonstrated to induce high-titer antigen-specific antibody responses upon immunization of mice. For this particular target immunogen, DeltaSAG1, the induced antibodies demonstrated poor reactivity to the native antigen, although slightly better for the preparation employing the in vitro lipidation strategy, indicating that DeltaSAG1 was suboptimally folded or presented. Nevertheless, we believe that the presented strategies offer convenient alternative ways to achieve efficient adjuvant incorporation for recombinant immunogens.