Effect of bleaching agents on dentin permeability to Streptococcus faecalis

Present status and future directions - Managing discoloured teeth

Managing tooth discolouration involves a range of different protocols for clinicians and patients in order to achieve an aesthetic result. There is an increasing public awareness in the appearance of their teeth and management of tooth discolouration may be inter-disciplinary and involve both vital and nonvital teeth. Vital teeth can be easily treated with low concentration hydrogen peroxide products safely and effectively using an external approach and trays. For endodontically treated teeth, the walking bleach technique with hydrogen releasing peroxide products is popular. However, there is an association with external cervical root resorption with higher concentrations of hydrogen peroxide of 30%-35%. There are also regulatory considerations for the use of hydrogen peroxide in certain jurisdictions internationally. Prosthodontic treatments are more invasive and involve loss of tooth structure as well as a life cycle of further treatment in the future. This narrative review is based on searches on PubMed and the Cochrane library. Bleaching endodontically treated teeth can be considered a safe and effective protocol in the management of discoloured teeth. However, the association between bleaching and resorption remains unclear although there is likely to be a relation to prior trauma. It is prudent to avoid thermocatalytic approaches and to use a base/sealer to cover the root filling. An awareness expectations of patients and multidisciplinary treatment considerations is important in achieving the aesthetic result for the patient. It is likely that there will be an increasing demand for aesthetic whitening treatments. Bleaching of teeth has also become increasingly regulated although there are international differences in the use and concentration of bleaching agents.

Spectroradiometric and Chemical Analysis of Severely Discolored Endodontically Treated Teeth

OBJECTIVE

This study aimed to explore the chemical changes and discoloration of endodontically treated teeth using spectroradiometric and chemical analyses.

METHODS AND MATERIALS

Ten freshly extracted sound third molars and 10 discolored molars obtained after root canal treatment (RCT) were included in this study. Dentin blocks (3 × 3 × 1 mm) were prepared and treated with an intracoronal bleaching agent. Spectroradiometric evaluations, X-ray photoelectron spectroscopy (XPS), and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) analyses were performed before and after bleaching. The spectroradiometric parameters and XPS and ATR-FTIR spectra of the dentin slabs were analyzed using independent-sample t-tests or one-way analysis of variance.

RESULTS

Differences in color coordinates and translucency parameters were observed between the two groups before bleaching. Demineralization effects were also detected in the discolored dentin. No binding energy shifts or new spectral bands were found in the XPS and ATR-FTIR spectra, except in the narrow-scanned XPS spectra of C1s. Significant changes in color coordinates were also found in both groups after bleaching, and the translucency parameter was remarkably altered in discolored dentin. The organic and inorganic components of dentin also decreased in both groups. However, binding energy shifts (ie, C1s, Ca2p, and P2p) were detected only in discolored dentin.

CONCLUSION

Significant alterations in the organic and inorganic components of dentin contributed to the discoloration of endodontically treated teeth. Moreover, intracoronal bleaching could effectively whiten both discolored and vital dentin. The chemical compositions of mineral and organic components within discolored dentin are more sensitive to the acid bleaching agent than normal teeth.

The effect of protocol for disinfection of extracted teeth recommended by center for disease control (CDC) on microhardness of enamel and dentin

Background

According to the guideline of the United States center for disease control (CDC), the extracted teeth should be sterilized by autoclaving or storage in 10% formalin before using for educational or research purposes. The objective of this study was to evaluate the effect of this protocol on microhardness of dentin and enamel.

Material and Methods

Thirty extracted single-root teeth were used in this study. The crowns were resected, and the roots were longitudinally sectioned into two halves. The Vickers microhardness (VHN) of specimens was measured on polished canal dentin and buccal enamel surfaces. The crowns were randomly divided into three groups (n=10). Group 1 and 2 were sterilized using autoclave and formalin, respectively while group 3 (control) was stored in synthetic tissue fluid. The root halves were also randomly divided into 3 groups (n=20) which were treated as mentioned above for crown samples. Following sterilization, VHN of samples was measured again. ANOVA and paired samples t-tests were used to analyze the data.

Results

Autoclaving caused a significant reduction in microhardness of dentin (P <0.001, 12.04% decreases in VHN). However, there were no significant differences for before and after sterilization within other groups.

Conclusions

Based on the results of this study, the CDC protocol is recommended in studies related to enamel microhardness. However, Autoclaving is not an appropriate sterilization method in studies related to dentin microhardness. In these studies, two-week immersion in 10% formalin is recommended.

Key words:Autoclave, CDC, extracted teeth, formalin, microhardness, sterilization.

Discolouration potential of endodontic procedures and materials: a review

Advances in endodontic materials and techniques are at the forefront of endodontic research. Despite continuous improvements, tooth discolouration, especially in anterior teeth, is considered an undesirable consequence following endodontic treatment as it creates a range of aesthetic problems. This article aims to discuss the intrinsic and internalized tooth discolouration caused by endodontic procedures, and to address the discolouration potential of materials used during root canal treatment, including root canal irrigants, intra-canal medicaments, endodontic and post-endodontic filling materials. In addition, the discolouration patterns caused by combined endodontic and nonendodontic aetiological factors are discussed. The recommended guidelines that should be followed by dental practitioners to prevent and manage tooth discolouration are also outlined.

Effect of intracoronal bleaching agents on ultrastructure and mineral content of dentin

Aim:

The purpose of this in vitro study was to evaluate the ultrastructural changes of dentin induced after exposure to different intracoronal tooth bleaching agents.

Materials and Methods:

Dental discs of 1 mm thickness were prepared from coronal dentin of sixty-four human maxillary premolars. Experimental specimens were divided into four subgroups: 45% carbamide peroxide, 35% hydrogen peroxide, sodium perborate + 30% hydrogen peroxide, sodium perborate + water. The specimens were then evaluated under scanning electron microscope to determine diameter of dentinal tubules and chemical analysis.

Results:

There was significant difference between dentinal tubule diameter of all test and control groups with the exception of sodium perborate + water. Chemical analysis revealed that there was no significant difference between experimental subgroups regarding calcium and sulfur wt%.

Conclusions:

All bleaching agents increased dentinal tubule diameter and promote alterations in mineral content of dentin with the exception of Sodium perborate mixed with water.

Changes in the stiffness of demineralized dentin following application of tooth whitening agents

OBJECTIVE

The purpose of this study was to evaluate the effect of the bleaching agents on the elastic modulus of bovine demineralized dentin matrix (EMDM).

MATERIALS AND METHODS

Eighty-five slices were obtained from 17 bovine teeth. The slices were divided randomly into five experimental groups (n = 17): unbleached control group (CG), 4% hydrogen peroxide (HP4), 4% hydrogen peroxide + 0.05% Ca (HP4 + Ca), 7.5% hydrogen peroxide + ACP (HP7.5) and 10% carbamide peroxide (CP10). The HP4, HP4 + Ca and CP10 groups were treated with the bleaching agents for 8 h/day (14 days), while the samples of HP7.5 group were exposed to bleaching agent for 30 min twice a day (14 days). The CG was kept in 100% humidity. After bleaching treatments, the enamel of the samples was removed and 85 dentin beams (0.5 × 1.7 × 7.0 mm) were prepared. Afterwards, the beams were immersed in 10% phosphoric acid solution (5 h) and rinsed with water (10 min). The beams were tested after 24 h, 7 and 14 days of storage in distilled water, using three-point bend method. Data were statistically analyzed using ANOVA and Fisher's test.

RESULTS

All bleaching treatments reduced the EMDM. After 14 days post-bleaching, the EMDM increased for HP4 and HP4+Ca groups.

CONCLUSIONS

The use of bleaching agents promoted a decrease in EMDM, which indicates that the bleaching treatment interacts with the dentin organic matrix. The EMDM measurement for the specimens of the 7.5% hydrogen peroxide group that were immersed in water at 14 days post-bleaching did not recover the EMDM values when compared to the control group.

Undesirable and adverse effects of tooth-whitening products: a review

Hydrogen peroxide (H(2)O(2)) is a powerful oxidising agent. It gives rise to agents known to be effective bleaching agents. The mechanisms of bleaching involve the degradation of the extracellular matrix and oxidation of chromophores located within enamel and dentin. However, H(2)O(2) produces also local undesirable effects on tooth structures and oral mucosa. In clinical conditions, the daily low-level doses used to produce tooth whitening never generate general acute and sub-acute toxic effects. Genotoxicity and carcinogenicity only occur at concentrations that are never reached during dental treatments. Some transient adverse effects have been reported on the oral mucosa and the digestive tract if the product is swallowed. Local effects may occur on the oral mucosa and dental tissues during whitening, namely, pulp sensitivity, cervical resorption, release of selected components of dental restorative materials, and alteration of the enamel surface. Most of the local effects are dependent of the technique and concentration of the product so far used, but as the results of bleaching obtained are not stable, repeated treatments add to the adverse effects. The informed decision to administer or not and the control of bleaching effects should stand in the hand of dental surgeons and certainly not as it appears at present, as cosmetics sold without any restriction despite the potential health hazards of peroxides.

Sealing capacity of a flowable composite, as a protective base, with different conditioning methods in nonvital bleaching

OBJECTIVE

The purpose of this in vitro study was to determine the microleakage of a nano-flowable composite used as a protective base, applied with different conditioning methods in nonvital bleaching.

MATERIALS AND METHODS

Forty root-filled teeth were divided into four treatment groups (n = 10 per group): group 1--Er:YAG laser etching + Adper Single Bond 2; group 2-37% phosphoric acid + Adper Single Bond 2; group 3--Adper Prompt L-Pop; and group 4--No treatment. A nano-flowable composite (Filtek Supreme Flow) base was used in each group. For a 24-h period, 40% hydrogen peroxide solution was applied to the pulp chambers, and they were subsequently subjected to a dye (silver nitrate) challenge for 4 h. After the dye was washed out with water, each tooth was cut in half and both halves were exposed to sunlight for 2 h to promote oxidation of the dye, turning it black. Finally the sections were examined under 4x magnification to determine the degree of leakage as assessed with a four-point scale. Statistical analysis was performed with the Mann-Whitney U test.

RESULTS

There were no significant differences between groups 1, 2, and 3 (p > 0.05), but the teeth in group 4 had significantly higher microleakage scores than the teeth in the other groups (p < 0.05).

CONCLUSION

Self-etching adhesive application, Er:YAG laser etching, and phosphoric acid etching combined with an adhesive system all showed similar microleakge scores when a nano-flowable composite was applied as a protective base in nonvital bleaching.

Nonvital tooth bleaching: a review of the literature and clinical procedures

Tooth discoloration varies in etiology, appearance, localization, severity, and adhesion to tooth structure. It can be defined as being extrinsic or intrinsic on the basis of localization and etiology. In this review of the literature, various causes of tooth discoloration, different bleaching materials, and their applications to endodontically treated teeth have been described. In the walking bleach technique the root filling should be completed first, and a cervical seal must be established. The bleaching agent should be changed every 3-7 days. The thermocatalytic technique involves placement of a bleaching agent in the pulp chamber followed by heat application. At the end of each visit the bleaching agent is left in the tooth so that it can function as a walking bleach until the next visit. External bleaching of endodontically treated teeth with an in-office technique requires a high concentration gel. It might be a supplement to the walking bleach technique, if the results are not satisfactory after 3-4 visits. These treatments require a bonded temporary filling or a bonded resin composite to seal the access cavity. There is a deficiency of evidence-based science in the literature that addresses the prognosis of bleached nonvital teeth. Therefore, it is important to always be aware of the possible complications and risks that are associated with the different bleaching techniques.

Effects of hydrogen peroxide on human dentin structure

It has been hypothesized that hydrogen peroxide (H(2)O(2)) bleaching may cause destruction of dentin by a mechanism of protein oxidation. However, to our knowledge, there has been no direct chemical evidence to validate this viewpoint. To investigate the effects of H(2)O(2) on the structure of human dentin, we used Fourier transform infrared spectroscopy (FTIR) and attenuated total reflection (ATR) spectroscopy. Human intact dentin specimens were treated either with 30% H(2)O(2) or Hanks' balanced salt solution (HBSS). Significant differences were observed in ATR spectra parameters. Additionally, demineralized dentin specimens were also tested. They were completely dissolved in the H(2)O(2), but remained intact in the 0.1 N HCl and HBSS. The results suggested that H(2)O(2) attacked both the organic and mineral components of dentin. Destruction of the organic components was mainly because of the oxidizing ability of H(2)O(2), while changes in the mineral components were probably due to its acidity.

Effect of Intracoronal Bleaching Agents on Dentin Microhardness

The purpose of this in vitro study was to compare the effect of intracoronal bleaching agents associated or unassociated with chlorhexidine gel on dentin microhardness. Sixty human maxillary incisor crowns were divided into six groups, and bleaching agents were sealed into the pulp chambers as follows: sodium perborate + water (SPW), sodium perborate + 2% chlorhexidine gel (SP + CHX), sodium perborate + 30% hydrogen peroxide solution (SP + HP), 37% carbamide peroxide gel (CP), 37% carbamide peroxide gel + 2% chlorhexidine gel (CP+CHX), and water (W). After the bleaching procedure, microhardness testing was carried out on the dentin surface at three different levels: inner, middle, and outer dentin. The greatest reduction in microhardness was observed for the SP + HP group. No differences were observed between the SPW and SP + CHX group. The 2% chlorhexidine gel did not adversely affect dentin microhardness when associated with the tested bleaching agents. CHX might be considered as an antimicrobial vehicle during intracoronal bleaching.

Nanoindentation study of human premolars subjected to bleaching agent

Bleaching of teeth is gaining popularity due to cosmetic reasons. However, the effect it has on teeth is still largely unknown. This paper seeks to evaluate the effect of a bleaching agent, 30% hydrogen peroxide, on the nanomechanical properties of dentin and enamel using the nanoindentation technique. The Young's modulus and hardness obtained from nanoindentation before and after bleaching were compared. Five newly extracted human premolars were used. Nanoindentation was first done on the sliced enamel and dentin regions to determine their mechanical properties. One batch of samples was kept in Hank's balanced salt solution as control while the other was bleached in 30% hydrogen peroxide for 24h. The same number of nanoindentations was then done near the previously indented regions for both the control and bleached samples and the results compared. Using paired sample t-tests with alpha=0.05, it was found that there were no significant differences in both the Young's modulus and hardness of dentin and enamel kept in control. However, the mechanical properties of the bleached dentin were significantly decreased. For intertubular dentin, the mean hardness decreased by 29-55% and the mean Young's modulus decreased by 19-43%. For enamel, the mean hardness decreased by 13-32% while the mean Young's modulus decreased by 18-32%. The exact mechanism by which hydrogen peroxide affects the dentin and enamel has yet to be fully elucidated. However, it is observed to have an undermining effect on the nanomechanical properties of teeth.

Effect of hydrogen peroxide on intertubular dentine

OBJECTIVES

To evaluate the effect of 30% hydrogen peroxide on the surface changes and nanomechanical properties of intertubular dentine.

METHODS

Five freshly extracted human premolars were sectioned and two specimens were obtained from each tooth. Atomic force microscopy (AFM) images of dentine were taken. Baseline hardness and Young's modulus of intertubular dentine were determined using nanoindentation testing and recorded. The specimens were then treated with either 0.5 ml of Hank's balanced salt solution (control group) or 30% hydrogen peroxide at 24 degrees C for 24 h. AFM imaging and determination of hardness and Young's modulus of intertubular dentine were then repeated. The images were compared and statistical analyses of hardness and Young's modulus were carried out using paired sample t-tests.

RESULTS

The AFM images showed recession of the intertubular dentine surface post-bleaching. For the control group, there was no significant change in hardness (p=0.124) and Young's modulus (p=0.438) of intertubular dentine. However, a significant decrease in hardness (p=0.002) and Young's modulus (p=0.001) of intertubular dentine was observed for the experimental group.

CONCLUSIONS

Exposure to 30% hydrogen peroxide for 24 h caused surface changes to intertubular dentine and significantly decreased the hardness and Young's modulus of intertubular dentine.

Considerations In Intracoronal Bleaching

Intracoronal bleaching is a simple, useful procedure for restoring the colour of discoloured root-filled teeth that are not extensively restored. It is important to minimise the extraradicular diffusion of hydrogen peroxide, as excessive levels of hydrogen peroxide in conjunction with existing inflammatory changes in the periodontium predispose the tooth to external root resorption. To keep the levels of extraradicular diffusion of hydrogen peroxide below the safety limit, it is imperative that an effective intermediate base cement of at least 2 mm be placed at the level of the buccal cemento-enamel junction over the root-filling prior to bleaching. The use of 35% carbamide peroxide as the intracoronal bleaching agent seems to combine the safety of sodium perborate together with the efficacy of 35% hydrogen peroxide. As bleaching agents may reduce the composite-tooth bond of some adhesive systems, the post-bleaching composite restoration should be delayed for at least three weeks.

Tooth bleaching--a critical review of the biological aspects

Present tooth-bleaching techniques are based upon hydrogen peroxide as the active agent. It is applied directly, or produced in a chemical reaction from sodium perborate or carbamide peroxide. More than 90% immediate success has been reported for intracoronal bleaching of non-vital teeth, and in the period of 1-8 years' observation time, from 10 to 40% of the initially successfully treated teeth needed re-treatment. Cervical root resorption is a possible consequence of internal bleaching and is more frequently observed in teeth treated with the thermo-catalytic procedure. When the external tooth-bleaching technique is used, the first subjective change in tooth color may be observed after 2-4 nights of tooth bleaching, and more than 90% satisfactory results have been reported. Tooth sensitivity is a common side-effect of external tooth bleaching observed in 15%-78% of the patients, but clinical studies addressing the risk of other adverse effects are lacking. Direct contact with hydrogen peroxide induced genotoxic effects in bacteria and cultured cells, whereas the effect was reduced or abolished in the presence of metabolizing enzymes. Several tumor-promoting studies, including the hamster cheek pouch model, indicated that hydrogen peroxide might act as a promoter. Multiple exposures of hydrogen peroxide have resulted in localized effects on the gastric mucosa, decreased food consumption, reduced weight gain, and blood chemistry changes in mice and rats. Our risk assessment revealed that a sufficient safety level was not reached in certain clinical situations of external tooth bleaching, such as bleaching one tooth arch with 35% carbamide peroxide, using several applications per day of 22% carbamide peroxide, and bleaching both arches simultaneously with 22% carbamide peroxide. The recommendation is to avoid using concentrations higher than 10% carbamide peroxide when one performs external bleaching. We advocate a selective use of external tooth bleaching based on high ethical standards and professional judgment.

Review of the current status of tooth whitening with the walking bleach technique

Internal bleaching procedures such as the walking bleach technique can be used for whitening of discoloured root-filled teeth. The walking bleach technique is performed by application of a paste consisting of sodium perborate-(tetrahydrate) and distilled water (3% H2O2), respectively, in the pulp chamber. Following a critical review of the scientific literature, heating of the mixture is contra-indicated as the risk of external cervical resorption and the formation of chemical radicals is increased by application of heat. An intracoronal dressing using 30% H2O2 should not be used in order to reduce the risk of inducing cervical resorption. This review provides advice based on the current literature and discusses how the walking bleach technique can lead to successful whitening of non-vital root-filled teeth without the risks of side-effects.

Effect of hydrogen peroxide and sodium perborate on biomechanical properties of human dentin

This study compared the ultimate tensile strength, micropunch shear strength, and microhardness of bleached and unbleached human dentin. Forty-four intact premolars were root canal treated and randomly divided into four groups. Bleaching agents were sealed in pulp chambers, as in clinical use. Group 1 (control) was treated with water, group 2 with 30% hydrogen peroxide, group 3 with sodium perborate mixed with water, and group 4 with sodium perborate mixed with 30% hydrogen peroxide. The teeth were stored in saline at 37 degrees C for 7 days. The teeth were then sectioned and biomechanical tests were carried out on dentin specimens that were obtained from all teeth. Intracoronal bleaching with 30% hydrogen peroxide and sodium perborate used either alone or in combination weakened dentin. Hydrogen peroxide alone tended to be more damaging than sodium perborate used alone or sodium perborate mixed with hydrogen peroxide.

Cytotoxicity of intracanal bleaching agents on periodontal ligament cells in vitro

Intracoronal bleaching of nonvital teeth is a simple and conservative procedure for esthetic restoration of discolored teeth. However it is possible that damage to the periodontal ligament may occur if the bleaching agents contact this tissue. The purpose of this study was to examine the cytotoxicity of intracanal bleaching agents on human periodontal ligament (PDL) cells in vitro. Three bleaching agents, 30% hydrogen peroxide (H2O2), 2.0 g/ml sodium perborate (SP) solution, and 2.0 g/ml SP in H2O2, were diluted from 10(-3) to 10(-7) with Eagle's minimal essential medium and incubated with PDL cells isolated and cultured from extracted teeth. Cytotoxicity was assessed quantitatively by determining the amount of lactic dehydrogenase activity released from the cells after exposure to the agents for 24 or 72 h. Dose-response curves were plotted, and TD50 values (dilution causing the release of 50% of control lactate dehydrogenase activity) and 95% confidence limits determined. The rank order of the TD50 values after exposure for 24 h was SP in H2O2 (most toxic) > H2O2 > SP solution (least toxic). After 72 h SP in H2O2 still produced the greatest cytotoxic effect. However the SP solution was more cytotoxic than H2O2 at this time point. It is concluded that the mixture of SP with H2O2 was the most toxic to the PDL cells in vitro.

Safety issues relating to the use of hydrogen peroxide in dentistry

Hydrogen peroxide is used widely in professionally and self-administered products. Hydrogen peroxide is a highly reactive substance which can damage oral soft tissues and hard tissues when present in high concentrations and with exposures of prolonged duration. This report provides an overview of health issues relating to the use of hydrogen peroxide, with an emphasis on safety with prolonged exposure to low concentrations of peroxide products. There is good evidence for the safety of hydrogen peroxide when used at low concentrations on a daily basis over extended periods of time, in self-administered oral health care products such as dentifrices and mouthrinses. These low concentrations neither damage oral hard or soft tissues, nor do they pose a significant risk of adverse long-term effects. Caution should be exercised with the increasingly higher concentration peroxide products used for 'walking' or 'power' bleaching due to the possibility of chemical irritation of oral soft tissues with injudicious use. The volumes of material and application times should be controlled carefully. Thorough education of patients is particularly important with self-applied gels because of the lack of professional supervision with such products. Such education is part of the duty of care of the dentist who supplies bleaching gels for at-home use.

Internal bleaching: long-term outcomes and complications

Internal bleaching with a 30 percent hydrogen peroxide solution is aesthetically very successful in the short term; however, in the long term, the success rate falls below 50 percent. This procedure is associated with a risk of external root resorption, documented both clinically and experimentally. The etiology of resorption and the effects of 30 percent hydrogen peroxide on dental tissues suggest that this chemical should be avoided. Internal bleaching is possible using sodium perborate mixed with water. The aesthetic outcome is still acceptable and the potential for resorption may be minimized.

Review of dental materials citations: Part B, July to December 1995

OBJECTIVE

A lag of many months occurs between journal issue publication and updates to electronic databases. The objective of this literature analysis was to identify and categorize all of the dental materials citations in biomedical journals that were published from July 1995 through December 1995.

METHODS

Seventeen primary and 51 secondary journals were searched using their tables of contents to detect and record dental materials publications from July to December of 1995. Those journals that were typically rich in dental materials articles were classified as primary ones. Citations were categorized into 17 topics and divided into subsections. The review excluded case reports, most literature related primarily to dental implants, and most articles on biomedical materials used outside of the field of general dentistry.

RESULTS

The greatest number of citations was related to topics of dentin bonding and resin-based restorative filling materials (composites and glass ionomers). There was no major change in the number of dental materials publications per year reported from 1993 (n = 786) to 1995 (n = 751).

SIGNIFICANCE

This citation list provides a comprehensive resource for use by academicians and researchers to bridge the gap between initial publication and access to electronic searching methods for major databases.