Triggered release of calcium from lipid vesicles: a bioinspired strategy for rapid gelation of polysaccharide and protein hydrogels

Calcium phosphates enhanced with liposomes - the future of bone regeneration and drug delivery

Effective healing and regeneration of various bone defects is still a major challenge and concern in modern medicine. Calcium phosphates have emerged as extensively studied bone substitute materials due to their structural and chemical resemblance to the mineral phase of bone, along with their versatile properties. Calcium phosphates present promising biological characteristics that make them suitable for bone substitution, but a critical limitation lies in their low osteoinductivity. To supplement these materials with properties that promote bone regeneration, prevent infections, and cure bone diseases locally, calcium phosphates can be biologically and therapeutically modified. A promising approach involves combining calcium phosphates with drug-containing liposomes, renowned for their high biocompatibility and ability to provide controlled and sustained drug delivery. Surprisingly, there is a lack of research focused on liposome-calcium phosphate composites, where liposomes are dispersed within a calcium phosphate matrix. This raises the question of why such studies are limited. In order to provide a comprehensive overview of existing liposome and calcium phosphate composites as bioactive substance delivery systems, the authors review the literature exploring the interactions between calcium phosphates and liposomes. Additionally, it seeks to identify potential interactions between calcium ions and liposomes, which may impact the feasibility of developing liposome-containing calcium phosphate composite materials. Liposome capacity to protect bioactive compounds and facilitate localized treatment can be particularly valuable in scenarios involving bone regeneration, infection prevention, and the management of bone diseases. This review explores the implications of liposomes and calcium phosphate material containing liposomes on drug delivery, bioavailability, and stability, offering insights into their advantages.

3D bioprinting of microorganisms: principles and applications

In recent years, the ability to create intricate, live tissues and organs has been made possible thanks to three-dimensional (3D) bioprinting. Although tissue engineering has received a lot of attention, there is growing interest in the use of 3D bioprinting for microorganisms. Microorganisms like bacteria, fungi, and algae, are essential to many industrial bioprocesses, such as bioremediation as well as the manufacture of chemicals, biomaterials, and pharmaceuticals. This review covers current developments in 3D bioprinting methods for microorganisms. We go over the bioink compositions designed to promote microbial viability and growth, taking into account factors like nutrient delivery, oxygen supply, and waste elimination. Additionally, we investigate the most important bioprinting techniques, including extrusion-based, inkjet, and laser-assisted approaches, as well as their suitability with various kinds of microorganisms. We also investigate the possible applications of 3D bioprinted microbes. These range from constructing synthetic microbial consortia for improved metabolic pathway combinations to designing spatially patterned microbial communities for enhanced bioremediation and bioprocessing. We also look at the potential for 3D bioprinting to advance microbial research, including the creation of defined microenvironments to observe microbial behavior. In conclusion, the 3D bioprinting of microorganisms marks a paradigm leap in microbial bioprocess engineering and has the potential to transform many application areas. The ability to design the spatial arrangement of various microorganisms in functional structures offers unprecedented possibilities and ultimately will drive innovation.

Evaluation of bioadhesive gels for local action in the esophagus

Direct drug administration to the esophagus faces several obstacles, including continuous salivary dilution and removal of the dosage form from the tissue surface due to esophageal peristalsis. These actions often result in short exposure times and reduced concentrations of drug at the esophageal surface, providing limited opportunities for drug absorption into or across the esophageal mucosa. A variety of bioadhesive polymers were investigated for their ability to resist removal by salivary washings using an ex vivo porcine esophageal tissue model. Hydroxypropylmethylcellulose and carboxymethylcellulose both have reported bioadhesive properties, but neither was able to withstand repeated exposure to saliva, and the gels formulated with these polymers were quickly removed from the esophageal surface. Two polyacrylic polymers, carbomer and polycarbophil, also showed limited esophageal surface retention when exposed to salivary washing, likely due to the ionic composition of saliva affecting the inter-polymer interactions necessary for these polymers to maintain their increased viscosities. In situ gel forming polysaccharide gels (ion-triggered), including xanthan gum, gellan gum, and sodium alginate, showed superior tissue surface retention, and formulations containing these bioadhesive polymers along with ciclesonide, an anti-inflammatory soft prodrug, were investigated as potential, locally-acting esophageal delivery systems. Exposure of a segment of esophagus to the ciclesonide-containing gels resulted in therapeutic concentrations of des-ciclesonide, the active drug metabolite, in the tissues within 30 min. Increasing des-CIC concentrations were also observed over a 3-hour exposure interval suggesting continued release and absorption of ciclesonide into the esophageal tissues. These results demonstrate the ability to achieve therapeutic drug concentrations in the esophageal tissues using in situ gel-forming bioadhesive polymer delivery systems, and these systems provide promising opportunities for the local treatment of esophageal disease.

Implications of biomimetic nanocarriers in targeted drug delivery

Nanomaterials and nanostructures have shown fascinating performances in various biomedicine fields, from cosmetic to cancer diagnosis and therapy. Engineered nanomaterials can encapsulate both lipophilic and hydrophilic substances/drugs to eliminate their limitations in the free forms, such as low bioavailability, multiple drug administration, off-target effects, and various side effects. Moreover, it is possible to deliver the loaded cargo to the desired site of action using engineered nanomaterials. One approach that has made nanocarriers more sophisticated is the "biomimetic" concept. In this scenario, biomolecules (e.g., natural proteins, peptides, phospholipids, cell membranes) are used as building blocks to construct nanocarriers and/or modify agents. For instance, it has been reported that specific cells tend to migrate to a particular site during specific circumstances (e.g., inflammation, tumor formation). Employing the cell membrane of these cells as a coating for nanocarriers confers practical targeting approaches. Accordingly, we introduce the biomimetic concept in the current study, review the recent studies, challenge the issues, and provide practical solutions.

Tuning Peptide-Based Hydrogels: Co-Assembly with Composites Driving the Highway to Technological Applications

Self-assembled peptide-based gels provide several advantages for technological applications. Recently, the co-assembly of gelators has been a strategy to modulate and tune gel properties and even implement stimuli-responsiveness. However, it still comprises limitations regarding the required library of compounds and outcoming properties. Hence, efforts have been made to combine peptide-based gels and (in)organic composites (e.g., magnetic nanoparticles, metal nanoparticles, liposomes, graphene, silica, clay, titanium dioxide, cadmium sulfide) to endow stimuli-responsive materials and achieve suitable properties in several fields ranging from optoelectronics to biomedical. Herein, we discuss the recent developments with composite peptide-based gels including the fabrication, tunability of gels' properties, and challenges on (bio)technological applications.

Current Understanding of the Applications of Photocrosslinked Hydrogels in Biomedical Engineering

Hydrogel materials have great application value in biomedical engineering. Among them, photocrosslinked hydrogels have attracted much attention due to their variety and simple convenient preparation methods. Here, we provide a systematic review of the biomedical-engineering applications of photocrosslinked hydrogels. First, we introduce the types of photocrosslinked hydrogel monomers, and the methods for preparation of photocrosslinked hydrogels with different morphologies are summarized. Subsequently, various biomedical applications of photocrosslinked hydrogels are reviewed. Finally, some shortcomings and development directions for photocrosslinked hydrogels are considered and proposed. This paper is designed to give researchers in related fields a systematic understanding of photocrosslinked hydrogels and provide inspiration to seek new development directions for studies of photocrosslinked hydrogels or related materials.

Advanced biomedical hydrogels: molecular architecture and its impact on medical applications

Hydrogels are cross-linked polymeric networks swollen in water, physiological aqueous solutions or biological fluids. They are synthesized by a wide range of polymerization methods that allow for the introduction of linear and branched units with specific molecular characteristics. In addition, they can be tuned to exhibit desirable chemical characteristics including hydrophilicity or hydrophobicity. The synthesized hydrogels can be anionic, cationic, or amphiphilic and can contain multifunctional cross-links, junctions or tie points. Beyond these characteristics, hydrogels exhibit compatibility with biological systems, and can be synthesized to render systems that swell or collapse in response to external stimuli. This versatility and compatibility have led to better understanding of how the hydrogel's molecular architecture will affect their physicochemical, mechanical and biological properties. We present a critical summary of the main methods to synthesize hydrogels, which define their architecture, and advanced structural characteristics for macromolecular/biological applications.

Mucoadhesive Poloxamer-Based Hydrogels for the Release of HP-β-CD-Complexed Dexamethasone in the Treatment of Buccal Diseases

Oral lichen planus (OLP) is an ongoing and chronic inflammatory disease affecting the mucous membrane of the oral cavity. Currently, the treatment of choice consists in the direct application into the buccal cavity of semisolid formulations containing a corticosteroid molecule to decrease inflammatory signs and symptoms. However, this administration route has shown various disadvantages limiting its clinical use and efficacy. Indeed, the frequency of application and the incorrect use of the preparation may lead to a poor efficacy and limit the treatment compliance. Furthermore, the saliva clearance and the mechanical stress present in the buccal cavity also involve a decrease in the mucosal exposure to the drug. In this context, the design of a new pharmaceutical formulation, containing a steroidal anti-inflammatory, mucoadhesive, sprayable and exhibiting a sustained and controlled release seems to be suitable to overcome the main limitations of the existing pharmaceutical dosage forms. The present work reports the formulation, optimization and evaluation of the mucoadhesive and release properties of a poloxamer 407 thermosensitive hydrogel containing a poorly water-soluble corticosteroid, dexamethasone acetate (DMA), threaded into hydroxypropyl-beta-cyclodextrin (HP-β-CD) molecules. Firstly, physicochemical properties were assessed to ensure suitable complexation of DMA into HP-β-CD cavities. Then, rheological properties, in the presence and absence of various mucoadhesive agents, were determined and optimized. The hydration ratio (0.218-0.191), the poloxamer 407 (15-17 wt%) percentage and liquid-cyclodextrin state were optimized as a function of the gelation transition temperature, viscoelastic behavior and dynamic flow viscosity. Deformation and resistance properties were evaluated in the presence of various mucoadhesive compounds, being the sodium alginate and xanthan gum the most suitable to improve adhesion and mucoadhesion properties. Xanthan gum was shown as the best agent prolonging the hydrogel retention time up to 45 min. Furthermore, xanthan gum has been found as a relevant polymer matrix controlling drug release by diffusion and swelling processes in order to achieve therapeutic concentration for prolonged periods of time.

Alginate Hydrogels with Tuneable Properties

Alginate is a material that has many biomedical applications due to its low toxicity and a variety of favourable physical properties. In particular, the ease in which hydrogels are formed from alginate and the variety of mechanical behaviours that can be imparted on the hydrogels, by understanding alginate chemistry and intuitive design, has made alginate the most widely investigated polysaccharide used for tissue engineering. This chapter provides an overview of alginate, from how the source and natural variations in composition can influence mechanical properties of alginate hydrogels, through to some innovative techniques used to modify and functionalise the hydrogels designed specifically for cell-based therapies. The main focus is on how these strategies of understanding and controlling the chemistry of alginates have resulted in the development of hydrogels that can be tuned to deliver the physical behaviours required for successful application. This will also highlight how research on the physicochemical properties has helped alginate evolve from a structural polysaccharide in brown seaweed into a highly tuneable, multifunctional, smart biomaterial, which is likely to find further biomedical applications in the future.

Modulating Alginate Hydrogels for Improved Biological Performance as Cellular 3D Microenvironments

The rational choice and design of biomaterials for biomedical applications is crucial for successful in vitro and in vivo strategies, ultimately dictating their performance and potential clinical applications. Alginate, a marine-derived polysaccharide obtained from seaweeds, is one of the most widely used polymers in the biomedical field, particularly to build three dimensional (3D) systems for in vitro culture and in vivo delivery of cells. Despite their biocompatibility, alginate hydrogels often require modifications to improve their biological activity, namely via inclusion of mammalian cell-interactive domains and fine-tuning of mechanical properties. These modifications enable the addition of new features for greater versatility and control over alginate-based systems, extending the plethora of applications and procedures where they can be used. Additionally, hybrid systems based on alginate combination with other components can also be explored to improve the mimicry of extracellular microenvironments and their dynamics. This review provides an overview on alginate properties and current clinical applications, along with different strategies that have been reported to improve alginate hydrogels performance as 3D matrices and 4D dynamic systems.

Ultrasound-Triggered Enzymatic Gelation

Hydrogels are formed using various triggers, including light irradiation, pH adjustment, heating, cooling, or chemical addition. Here, a new method for forming hydrogels is introduced: ultrasound-triggered enzymatic gelation. Specifically, ultrasound is used as a stimulus to liberate liposomal calcium ions, which then trigger the enzymatic activity of transglutaminase. The activated enzyme catalyzes the formation of fibrinogen hydrogels through covalent intermolecular crosslinking. The catalysis and gelation processes are monitored in real time and both the enzyme kinetics and final hydrogel properties are controlled by varying the initial ultrasound exposure time. This technology is extended to microbubble-liposome conjugates, which exhibit a stronger response to the applied acoustic field and are also used for ultrasound-triggered enzymatic hydrogelation. To the best of the knowledge, these results are the first instance in which ultrasound is used as a trigger for either enzyme catalysis or enzymatic hydrogelation. This approach is highly versatile and can be readily applied to different ion-dependent enzymes or gelation systems. Moreover, this work paves the way for the use of ultrasound as a remote trigger for in vivo hydrogelation.

In vivo biocompatibility and immunogenicity of metal-phenolic gelation

In vivo forming hydrogels are of interest for diverse biomedical applications due to their ease-of-use and minimal invasiveness and therefore high translational potential. Supramolecular hydrogels that can be assembled using metal-phenolic coordination of naturally occurring polyphenols and group IV metal ions (e.g. TiIV or ZrIV) provide a versatile and robust platform for engineering such materials. However, the in situ formation and in vivo response to this new class of materials has not yet been reported. Here, we demonstrate that metal-phenolic supramolecular gelation occurs successfully in vivo and we investigate the host response to the material over 14 weeks. The TiIV-tannic acid materials form stable gels that are well-tolerated following subcutaneous injection. Histology reveals a mild foreign body reaction, and titanium biodistribution studies show low accumulation in distal tissues. Compared to poloxamer-based hydrogels (commonly used for in vivo gelation), TiIV-tannic acid materials show a substantially improved in vitro drug release profile for the corticosteroid dexamethasone (from <1 day to >10 days). These results provide essential in vivo characterization for this new class of metal-phenolic hydrogels, and highlight their potential suitability for biomedical applications in areas such as drug delivery and regenerative medicine.

Biopolymeric In Situ Hydrogels for Tissue Engineering and Bioimaging Applications

BACKGROUND

Biopolymeric in situ hydrogels play a crucial role in the regenerative repair and replacement of infected or injured tissue. They possess excellent biodegradability and biocompatibility in the biological system, however only a few biopolymeric in situ hydrogels have been approved clinically. Researchers have been investigating new advancements and designs to restore tissue functions and structure, and these studies involve a composite of biometrics, cells and a combination of factors that can repair or regenerate damaged tissue.

METHODS

Injectable hydrogels, cross-linking mechanisms, bioactive materials for injectable hydrogels, clinically applied injectable biopolymeric hydrogels and the bioimaging applications of hydrogels were reviewed.

RESULTS

This article reviews the different types of biopolymeric injectable hydrogels, their gelation mechanisms, tissue engineering, clinical applications and their various in situ imaging techniques.

CONCLUSION

The applications of bioactive injectable hydrogels and their bioimaging are a promising area in tissue engineering and regenerative medicine. There is a high demand for injectable hydrogels for in situ imaging.

Targeted Ganglionated Plexi Denervation Using Magnetic Nanoparticles Carrying Calcium Chloride Payload

OBJECTIVES

This study sought to develop a novel targeted delivery therapy to ablate the major atrial ganglionated plexi (GP) using magnetic nanoparticles carrying a CaCl₂ payload.

BACKGROUND

Prior studies indicated the role of hyperactivity of the cardiac autonomic nervous system in the genesis of atrial fibrillation.

METHODS

Twenty-eight male mongrel dogs underwent a bilateral thoracotomy. CaCl₂-encapsulated magnetic nanoparticles (Ca-MNP) included magnetite in a sphere of biocompatible, biodegradable poly(lactic-co-glycolic acid). A custom external electromagnet focusing the magnetic field gradient (2,600 G) on the epicardial surface of the targeted GP was used to pull Ca-MNP into and release CaCl₂ within the GP. The ventricular rate slowing response to high frequency stimulation (20 Hz, 0.1 ms) of the GP was used to assess the GP function.

RESULTS

The minimal effective concentration of CaCl₂ to inhibit the GP function was 0.5 mmol/l. Three weeks after CaCl₂ (0.5 mmol/l, n = 18 GP) or saline (n = 18 GP) microinjection into GP, the increased GP function, neural activity, and atrial fibrillation inducibility, as well as shortened effective refractory period in response to 6 h of rapid atrial pacing (1,200 beats/min) were suppressed by CaCl₂ microinjection. After intracoronary infusion of Ca-MNP, the external electromagnet pulled Ca-MNP to the targeted GP and suppressed the GP function (n = 6 GP) within 15 min.

CONCLUSIONS

Ca-MNP can be magnetically targeted to suppress GP function by calcium-mediated neurotoxicity. This novel approach may be used to treat arrhythmias related to hyperactivity of the cardiac autonomic nervous system, such as early stage of atrial fibrillation, with minimal myocardial injury.

Unusual multiscale mechanics of biomimetic nanoparticle hydrogels

Viscoelastic properties are central for gels and other materials. Simultaneously, high storage and loss moduli are difficult to attain due to their contrarian requirements to chemical structure. Biomimetic inorganic nanoparticles offer a promising toolbox for multiscale engineering of gel mechanics, but a conceptual framework for their molecular, nanoscale, mesoscale, and microscale engineering as viscoelastic materials is absent. Here we show nanoparticle gels with simultaneously high storage and loss moduli from CdTe nanoparticles. Viscoelastic figure of merit reaches 1.83 MPa exceeding that of comparable gels by 100–1000 times for glutathione-stabilized nanoparticles. The gels made from the smallest nanoparticles display the highest stiffness, which was attributed to the drastic change of GSH configurations when nanoparticles decrease in size. A computational model accounting for the difference in nanoparticle interactions for variable GSH configurations describes the unusual trends of nanoparticle gel viscoelasticity. These observations are generalizable to other NP gels interconnected by supramolecular interactions and lead to materials with high-load bearing abilities and energy dissipation needed for multiple technologies.

Achieving simultaneous high storage and loss moduli in gels is difficult due to the opposite chemical structure requirements needed for such properties. Here the authors show a spectrum of gels containing CdTe nanoparticles stabilized by glutathione that have such properties which can be rationalised through the developed model.

Polysaccharide matrices used in 3D in vitro cell culture systems

Polysaccharides comprise a diverse class of polymeric materials with a history of proven biocompatibility and continual use as biomaterials. Recent focus on new matrices appropriate for three-dimensional (3D) cell culture offers new opportunities to apply polysaccharides as extracellular matrix mimics. However, chemical and structural bases for specific cell-polysaccharide interactions essential for their utility as 3-D cell matrices are not well defined. This review describes how these naturally sourced biomaterials satisfy several key properties for current 3D cell culture needs and can also be synthetically modified or blended with additional components to tailor their cell engagement properties. Beyond their benign interactions with many cell types in cultures, their economical and high quality sourcing, optical clarity for ex situ analytical interrogation and in situ gelation represent important properties of these polymers for 3D cell culture applications. Continued diversification of their versatile glycan chemistry, new bio-synthetic sourcing strategies and elucidation of new cell-specific properties are attractive to expand the polysaccharide polymer utility for cell culture needs. Many 3D cell culture priorities are addressed with the portfolio of polysaccharide materials available and under development. This review provides a critical analysis of their properties, capabilities and challenges in 3D cell culture applications.

Biomimetics in drug delivery systems: A critical review

Today, the advanced drug delivery systems have been focused on targeted drug delivery fields. The novel drug delivery is involved with the improvement of the capacity of drug loading in drug carriers, cellular uptake of drug carriers, and the sustained release of drugs within target cells. In this review, six groups of therapeutic drug carriers including biomimetic hydrogels, biomimetic micelles, biomimetic liposomes, biomimetic dendrimers, biomimetic polymeric carriers and biomimetic nanostructures, are studied. The subject takes advantage of the biomimetic methods of productions or the biomimetic techniques for the surface modifications, similar to what accrues in natural cells. Moreover, the effects of these biomimetic approaches for promoting the drug efficiency in targeted drug delivery are visible. The study demonstrates that the fabrication of biomimetic nanocomposite drug carriers could noticeably promote the efficiency of drugs in targeted drug delivery systems.

A Thixotropic Polyglycerol Sebacate-Based Supramolecular Hydrogel as an Injectable Drug Delivery Matrix

We have developed a "self-healing" polyglycerol sebacate-polyethylene glycol methyl ether methacrylate (PGS-PEGMEMA)/α-Cyclodextrin (αCD) hydrogel which could be sheared into a liquid during injection and has the potential to quickly "heal" itself back into gel post-injection. This hydrogel was shown to be biocompatible and biodegradable and therefore appropriate for use in vivo. Furthermore, the storage and loss moduli of the hydrogels could be tuned (by varying the concentration of αCD) between a fraction of a kPa to a few 100 kPa, a range that coincides with the moduli of cells and human soft tissues. This property would allow for this hydrogel to be used in vivo with maximal mechanical compatibility with human soft tissues. In vitro experiments showed that the hydrogel demonstrated a linear mass erosion profile and a biphasic drug (doxorubicin) release profile: Phase I was primarily driven by diffusion and Phase II was driven by hydrogel erosion. The diffusion mechanism was modeled with the First Order equation and the erosion mechanism with the Hopfenberg equation. This established fitting model could be used to predict releases with other drugs and estimate the composition of the hydrogel required to achieve a desired release rate.

Investigation on polyvinyl-alcohol-based rapidly gelling hydrogels for containment of hazardous chemicals

PVA-based rapidly gelling hydrogels were prepared in situ for the containment of hazardous chemicals.

Stimulus-responsive hydrogels: Theory, modern advances, and applications

Over the past century, hydrogels have emerged as effective materials for an immense variety of applications. The unique network structure of hydrogels enables very high levels of hydrophilicity and biocompatibility, while at the same time exhibiting the soft physical properties associated with living tissue, making them ideal biomaterials. Stimulus-responsive hydrogels have been especially impactful, allowing for unprecedented levels of control over material properties in response to external cues. This enhanced control has enabled groundbreaking advances in healthcare, allowing for more effective treatment of a vast array of diseases and improved approaches for tissue engineering and wound healing. In this extensive review, we identify and discuss the multitude of response modalities that have been developed, including temperature, pH, chemical, light, electro, and shear-sensitive hydrogels. We discuss the theoretical analysis of hydrogel properties and the mechanisms used to create these responses, highlighting both the pioneering and most recent work in all of these fields. Finally, we review the many current and proposed applications of these hydrogels in medicine and industry.

Modified biopolymer-dextrin based crosslinked hydrogels: application in controlled drug delivery

This review describes hydrogels and their classifications along with the synthesis and properties of biopolymer-dextrin based crosslinked hydrogels towards potential application in controlled drug delivery.

Biomimetic materials for medical application through enzymatic modification

Living organisms synthesize functional materials, based on proteins and polysaccharides, using enzyme-catalyzed reactions. According to the biomimetic approach, biomaterial matrices for tissue engineering are designed to be able to mimic the properties and the functions of the extracellular matrix (ECM). In this chapter, the most significant research efforts dedicated to the study and the preparation of biomimetic materials through enzymatic modifications were reviewed. The functionalizations of different polymeric matrices obtained through the catalytic activity of two enzymes (Transglutaminase, TGase and Tyrosinase, TYRase) were discussed. Specifically, the biomimetic applications of TGase and TYRase to confer appropriate biomimetic properties to the biomaterials, such as the possibility to obtain in situ gelling hydrogels and the incorporation of bioactive molecules (growth factors) and cell-binding peptides into the scaffolds, were reviewed.

25th anniversary article: Rational design and applications of hydrogels in regenerative medicine

Hydrogels are hydrophilic polymer-based materials with high water content and physical characteristics that resemble the native extracellular matrix. Because of their remarkable properties, hydrogel systems are used for a wide range of biomedical applications, such as three-dimensional (3D) matrices for tissue engineering, drug-delivery vehicles, composite biomaterials, and as injectable fillers in minimally invasive surgeries. In addition, the rational design of hydrogels with controlled physical and biological properties can be used to modulate cellular functionality and tissue morphogenesis. Here, the development of advanced hydrogels with tunable physiochemical properties is highlighted, with particular emphasis on elastomeric, light-sensitive, composite, and shape-memory hydrogels. Emerging technologies developed over the past decade to control hydrogel architecture are also discussed and a number of potential applications and challenges in the utilization of hydrogels in regenerative medicine are reviewed. It is anticipated that the continued development of sophisticated hydrogels will result in clinical applications that will improve patient care and quality of life.

Control of PDMS crosslinking by encapsulating a hydride crosslinker in a PMMA microcapsule

Schematic diagram of the PDMS network around the microcapsule that leads to the trapping of HMS-301 in the range 0.8 < r < 1.4.

Supramolecular approaches to combining membrane transport with adhesion

Cells carefully control the transit of compounds through their membranes using “gated” protein channels that respond to chemical stimuli. Connexin gap junctions, which are high conductance cell-to-cell channels, are a remarkable class of “gated” channel with multiple levels of assembly. A gap junction between adhering cells comprises two half-channels in each cell membrane that adhere to each other to form a continuous cell-to-cell channel. Each half-channel is a hexameric assembly of six protein transmembrane subunits. These gap junctions display both intramembrane assembly and intermembrane assembly, making them an attractive target for biomimetic studies. Although many examples of self-assembled channels have been developed, few can also mediate intermembrane adhesion. Developing systems that combine membrane adhesion with controlled transit across the membrane would not only provide a better understanding of self-assembly in and around the membrane, but would also provide a route towards smart biomaterials, targeted drug delivery and an interface with nanotechnology.

This Account describes our biomimetic approaches to combining membrane adhesion with membrane transport, using both self-assembled “sticky” pores and “sticky” nanoparticles to trigger transit across membranes. This combination links both fundamental and applied research, acting as a bridge between molecular level assembly and the formation of functional biomaterials. The ultimate goal is to create complex self-assembled systems in biological or biomimetic environments that can both interface with cells and transport compounds across bilayers in response to remote chemical or electromagnetic signals. Our research in this area started with fundamental studies of intramembrane and intermembrane self-assembly, building upon previously known channel-forming compounds to create self-assembled channels that were switchable or able to mediate vesicle–vesicle adhesion. Subsequently, nanoparticles with a “sticky” coating were used to mediate adhesion between vesicles. Combining these adhesive properties with the unique characteristics of nanosized magnetite allowed a noninvasive magnetic signal to trigger transport of compounds out of magnetic nanoparticle-vesicle assemblies. Adding an extravesicular matrix produced new responsive biomaterials for use in tissue engineering. These biomaterials can be magnetically patterned and can deliver drugs upon receipt of a magnetic signal, allowing spatiotemporal control over cellular responses.

Ion-responsive alginate based macroporous injectable hydrogel scaffolds prepared by emulsion templating

Ion-responsive biocompatible macroporous hydrogels with a well-defined highly interconnected open porous structure were synthesised using oil-in-water (o/w) high internal phase emulsion (HIPE) templating. Methacrylate-modified alginate was crosslinked in the continuous minority water phase and the oil internal phase removed to produce macroporous hydrogel monoliths. The physical dimensions, pore and pore throat size as well as water uptake of the alginate polyHIPE hydrogel can be controllably tuned by ion-responsive behaviour towards Ca²⁺ ions. The ionic crosslinks formed are fully reversible and be dissolved using sodium citrate to remove Ca²⁺ ions through chelation. The polyHIPE hydrogels possess mechanical properties with storage moduli up to 20 kPa and are biocompatible as shown by cytotoxicity assays. The hydrogel can be extruded through a hypodermic needle causing it to break into small pieces (about 1 to 3 mm in diameter) while retaining the interconnected pore morphology after injection. Furthermore, these hydrogel fragments can be reformed into a coherent scaffold under mild conditions using an alginate solution containing Ca²⁺ ions.

Thermoresponsive hydrogels for cellular delivery

The delivery of living cells into a host body has emerged as a promising approach to treating a variety of different diseases and for tissue repair. However, one of the major obstacles for clinical success is to deliver the cells to the target tissue without losing control of cell fate and function after transplantation. Temperature-responsive biomaterials represent a promising vehicle to deliver cells noninvasively by injection of a liquid precursor, which undergoes a reversible phase transition at body temperature, thus, forming temperature-induced hydrogels in situ. The final material provides transplanted cells with a synthetic extracellular matrix, which retains the cells at the injection site, supports cell growth and mitigates migration. This mini review is intended to cover the fundamental physicochemical characteristics of these thermoresponsive biomaterials, and to examine the applications, with a focus on the recently developed cell-delivery systems for tissue engineering and cell therapy, including advantages, limitations and future challenges.

Protein capsules assembled via isobutyramide grafts: sequential growth, biofunctionalization, and cellular uptake

We report the sequential assembly of proteins via the alternating physical adsorption of human serum albumin (HSA) and chemical grafting with isobutyramide (IBAM) or bromoisobutyramide (BrIBAM) groups. This approach, performed on silica template particles, leads to the formation of noncovalent protein films with controlled growth at the nanometer scale. Further, after template removal, hollow protein capsules with tunable wall thicknesses and high mechanical stability are obtained. The use of BrIBAM, compared to IBAM grafts, leads to significantly thicker capsule walls, highlighting the influence of the bromine atoms in the assembly process, which is discussed in terms of a theoretical model of noncovalent interactions. Another feature of the process is the possibility to functionalize the HSA capsules with other biologically active macromolecules, including enzymes, polysaccharides, or DNA plasmids, demonstrating the versatility of this approach. We also report that BrIBAM-HSA and IBAM-HSA capsules display negligible cytotoxicity in vitro with HeLa cells and that their cellular uptake is dependent on the thickness of the capsule walls. These findings support the potential use of these protein capsules in tailored biological applications such as drug delivery.

The use of micro- and nanospheres as functional components for bone tissue regeneration

During the last decade, the use of micro- and nanospheres as functional components for bone tissue regeneration has drawn increasing interest. Scaffolds comprising micro- and nanospheres display several advantages compared with traditional monolithic scaffolds that are related to (i) an improved control over sustained delivery of therapeutic agents, signaling biomolecules and even pluripotent stem cells, (ii) the introduction of spheres as stimulus-sensitive delivery vehicles for triggered release, (iii) the use of spheres to introduce porosity and/or improve the mechanical properties of bulk scaffolds by acting as porogen or reinforcement phase, (iv) the use of spheres as compartmentalized microreactors for dedicated biochemical processes, (v) the use of spheres as cell delivery vehicle, and, finally, (vi) the possibility of preparing injectable and/or moldable formulations to be applied by using minimally invasive surgery. This article focuses on recent developments with regard to the use of micro- and nanospheres for bone regeneration by categorizing micro-/nanospheres by material class (polymers, ceramics, and composites) as well as summarizing the main strategies that employ these spheres to improve the functionality of scaffolds for bone tissue engineering.

Programmable microcapsules from self-immolative polymers

For the autonomous repair of damaged materials, microcapsules are needed that release their contents in response to a variety of physical and chemical phenomena, not just by direct mechanical rupture. Herein we report a general route to programmable microcapsules. This method creates core-shell microcapsules with polymeric shell walls composed of self-immolative polymer networks. The polymers in these networks undergo a head-to-tail depolymerization upon removal of the triggering end group, leading to breakdown of the shell wall and subsequent release of the capsule's liquid interior. We report microcapsules with shell walls bearing both Boc and Fmoc triggering groups. The capsules release their contents only under conditions known to remove these triggering groups; otherwise, they retain their contents under a variety of conditions. In support of the proposed release mechanism, the capsule shell walls were observed to undergo physical cracking upon exposure to the triggering conditions.

Mineralization of hydrogels for bone regeneration

Hydrogels are an important class of highly hydrated polymers that are widely investigated for potential use in soft tissue engineering. Generally, however, hydrogels lack the ability to mineralize, preventing the formation of chemical bonds with hard tissues such as bone. A recent trend in tissue engineering involves the development of hydrogels that possess the capacity to mineralize. The strategy that has attracted most interest has been the incorporation of inorganic phases such as calcium phosphate ceramics and bioglasses into hydrogel matrices. These inorganic particles act as nucleation sites that enable further mineralization, thus improving the mechanical properties of the composite material. A second route to create nucleation sites for calcification of hydrogels involves the use of features from the physiological mineralization process. Examples of these biomimetic mineralization strategies include (1) soaking of hydrogels in solutions that are saturated with respect to calcium phosphate, (2) incorporation of enzymes that catalyze deposition of bone mineral, and (3) incorporation of synthetic analogues to matrix vesicles that are the initial sites of biomineralization. Functionalization of the polymeric hydrogel backbone with negatively charged groups is a third mechanism to promote mineralization in otherwise inert hydrogels. This review summarizes the main strategies that have been developed in the past decade to calcify hydrogel matrices and render these hydrogels suitable for applications in bone regeneration.

Cell encapsulation in biodegradable hydrogels for tissue engineering applications

Encapsulating cells in biodegradable hydrogels offers numerous attractive features for tissue engineering, including ease of handling, a highly hydrated tissue-like environment for cell and tissue growth, and the ability to form in vivo. Many properties important to the design of a hydrogel scaffold, such as swelling, mechanical properties, degradation, and diffusion, are closely linked to the crosslinked structure of the hydrogel, which is controlled through a variety of different processing conditions. Degradation may be tuned by incorporating hydrolytically or enzymatically labile segments into the hydrogel or by using natural biopolymers that are susceptible to enzymatic degradation. Because cells are present during the gelation process, the number of suitable chemistries and formulations are limited. In this review, we describe important considerations for designing biodegradable hydrogels for cell encapsulation and highlight recent advances in material design and their applications in tissue engineering.