Fabrication of poly(phosphoester) nerve guides by immersion precipitation and the control of porosity

Perspectives on 3D Bioprinting of Peripheral Nerve Conduits

The peripheral nervous system controls the functions of sensation, movement and motor coordination of the body. Peripheral nerves can get damaged easily by trauma or neurodegenerative diseases. The injury can cause a devastating effect on the affected individual and his aides. Treatment modalities include anti-inflammatory medications, physiotherapy, surgery, nerve grafting and rehabilitation. 3D bioprinted peripheral nerve conduits serve as nerve grafts to fill the gaps of severed nerve bodies. The application of induced pluripotent stem cells, its derivatives and bioprinting are important techniques that come in handy while making living peripheral nerve conduits. The design of nerve conduits and bioprinting require comprehensive information on neural architecture, type of injury, neural supporting cells, scaffold materials to use, neural growth factors to add and to streamline the mechanical properties of the conduit. This paper gives a perspective on the factors to consider while bioprinting the peripheral nerve conduits.

3D Printed Polymeric Hydrogels for Nerve Regeneration

The human nervous system lacks an inherent ability to regenerate its components upon damage or diseased conditions. During the last decade, this has motivated the development of a number of strategies for nerve regeneration. However, most of those approaches have not been used in clinical applications till today. For instance, although biomaterial-based scaffolds have been extensively used for nerve reparation, the lack of more customized structures have hampered their use in vivo. This highlight focuses mainly on how 3D bioprinting technology, using polymeric hydrogels as bio-inks, can be used for the development of new nerve guidance channels or devices for peripheral nerve cell regeneration. In this concise contribution, some of the most recent and representative examples are highlighted to discuss the challenges involved in various aspects of 3D bioprinting for nerve cell regeneration, specifically when using polymeric hydrogels.

Transiently thermoresponsive polymers and their applications in biomedicine

The focus of this review is on the class of transiently thermoresponsive polymers. These polymers are thermoresponsive, but gradually lose this property upon chemical transformation - often a hydrolysis reaction - in the polymer side chain or backbone. An overview of the different approaches used for the design of these polymers along with their physicochemical properties is given. Their amphiphilic properties and degradability into fully soluble compounds make this class of responsive polymers attractive for drug delivery and tissue engineering applications. Examples of these are also provided in this review.

Thermal, Waterproof, Breathable, and Antibacterial Cloth with a Nanoporous Structure

Wearable thermal management materials have attracted increasing attention because of the potential in energy conservation and the possibility to meet the need of smart clothes. An ideal cloth for cold areas has to be lightweight, warm, waterproof but breathable, and antibacterial. Herein, we present a multifunctional cloth starting from a cotton fabric, for which one side is modified to be superhydrophobic by introducing a silica nanoparticle/polydimethylsiloxane (PDMS) layer, while the other side is coated with a nanoporous cellulose acetate layer followed by depositing a thin silver film. The porosity allows the fabric to be breathable, and the silver film plays three important roles as a perfect infrared reflector, a flexible heater, and an antibacterial layer. Such a multifunctional fabric might be potentially useful in outdoor coats and other facilities.

Thermogelling chitosan lactate hydrogel improves functional recovery after a C2 spinal cord hemisection in rat

The present study was designed to provide an appropriate micro-environment for regenerating axotomized neurons and proliferating/migrating cells. Because of its intrinsic permissive properties, biocompatibility and biodegradability, we chose to evaluate the therapeutic effectiveness of a chitosan-based biopolymer. The biomaterial toxicity was measured through in vitro test based on fibroblast cell survival on thermogelling chitosan lactate hydrogel substrate and then polymer was implanted into a C2 hemisection of the rat spinal cord. Animals were randomized into three experimental groups (Control, Lesion and Lesion + Hydrogel) and functional tests (ladder walking and forelimb grip strength tests, respiratory assessment by whole-body plethysmography measurements) were used, once a week during 10 weeks, to evaluate post-traumatic recoveries. Then, electrophysiological examinations (reflexivity of the sub-lesional region, ventilatory adjustments to muscle fatigue known to elicit the muscle metaboreflex and phrenic nerve recordings during normoxia and temporary hypoxia) were performed. In vitro results indicated that the chitosan matrix is a non-toxic biomaterial that allowed fibroblast survival. Furthermore, implanted animals showed improvements of their ladder walking scores from the 4th week post-implantation. Finally, electrophysiological recordings indicated that animals receiving the chitosan matrix exhibited recovery of the H-reflex rate sensitive depression, the ventilatory response to repetitive muscle stimulation and an increase of the phrenic nerve activity to asphyxia compared to lesioned and nonimplanted animals. This study indicates that hydrogel based on chitosan constitute a promising therapeutic approach to repair damaged spinal cord or may be used as an adjuvant with other treatments to enhance functional recovery after a central nervous system damage. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2004-2019, 2017.

Poly(lactide-co-glycolide)/Hydroxyapatite Porous Scaffold with Microchannels for Bone Regeneration

Mass transfer restrictions of scaffolds are currently hindering the development of three-dimensional (3D), clinically viable, and tissue-engineered constructs. For this situation, a 3D poly(lactide-co-glycolide)/hydroxyapatite porous scaffold, which was very favorable for the transfer of nutrients to and waste products from the cells in the pores, was developed in this study. The 3D scaffold had an innovative structure, including macropores with diameters of 300–450 μm for cell ingrowth and microchannels with diameters of 2–4 μm for nutrition and waste exchange. The mechanical strength in wet state was strong enough to offer structural support. The typical structure was more beneficial for the attachment, proliferation, and differentiation of rabbit bone marrow mesenchymal stem cells (rBMSCs). The alkaline phosphatase (ALP) activity and calcium (Ca) deposition were evaluated on the differentiation of rBMSCs, and the results indicated that the microchannel structure was very favorable for differentiating rBMSCs into maturing osteoblasts. For repairing rabbit radius defects in vivo, there was rapid healing in the defects treated with the 3D porous scaffold with microchannels, where the bridging by a large bony callus was observed at 12 weeks post-surgery. Based on the results, the 3D porous scaffold with microchannels was a promising candidate for bone defect repair.

Stabilization of DNA Structures with Poly(ethylene sodium phosphate)

The structure and stability of biomolecules under molecular crowding conditions are of interest because such information clarifies how biomolecules behave under cell-mimicking conditions. The anionic surfaces of chromatin, which is composed of DNA strands and histone complexes, are concentrated in cell nuclei and thus generate a polyanionic crowding environment. In this study, we designed and synthesized an anionic polymer, poly(ethylene sodium phosphate) (PEP·Na), which has a nucleic acid phosphate backbone and created a cell nucleus-like environment. The effects of molecular crowding with PEP·Na on the thermodynamics of DNA duplexes, triplexes, and G-quadruplexes were systematically studied. Thermodynamic analysis demonstrated that PEP·Na significantly stabilized the DNA structures; e.g., a free energy change at 25 °C for duplex formation decreased from -6.6 to -12.8 kcal/mol with 20 wt % PEP·Na. Thermodynamic parameters further indicated that the factors for the stabilization of the DNA structures were dependent on sodium ion concentration. At lower polymer concentrations, the stabilization was attributed to a shielding of the electrostatic repulsion between DNA strands by the sodium ions of PEP·Na. In contrast, at higher polymer concentrations, the DNA structures were entropically stabilized by volume exclusion, which could be enhanced by electrostatic repulsion between phosphate groups in DNA strands and in PEP·Na. Additionally, increasing PEP·Na concentration resulted in increasing enthalpy of the DNA duplex but decreasing enthalpy of DNA G-quadruplex, indicating that the polymers also promoted dehydration of the DNA strands. Thus, polyanionic crowding affects the thermodynamics of DNA structures via the sodium ions, volume exclusion, and hydration. The stabilization of DNA by the cell nucleus-like polyanionic crowding provides new information regarding DNA structures and allows for modeling reactions in cell nuclei.

Topographically-patterned porous membranes in a microfluidic device as an in vitro model of renal reabsorptive barriers

Models of reabsorptive barriers require both a means to provide realistic physiologic cues to and quantify transport across a layer of cells forming the barrier. Here we have topographically-patterned porous membranes with several user-defined pattern types. To demonstrate the utility of the patterned membranes, we selected one type of pattern and applied it to a membrane to serve as a cell culture support in a microfluidic model of a renal reabsorptive barrier. The topographic cues in the model resemble physiological cues found in vivo while the porous structure allows quantification of transport across the cell layer. Sub-micron surface topography generated via hot-embossing onto a track-etched polycarbonate membrane, fully replicated topographical features and preserved porous architecture. Pore size and shape were analyzed with SEM and image analysis to determine the effect of hot embossing on pore morphology. The membrane was assembled into a bilayer microfluidic device and a human kidney proximal tubule epithelial cell line (HK-2) and primary renal proximal tubule epithelial cells (RPTEC) were cultured to confluency on the membrane. Immunofluorescent staining of both cell types revealed protein expression indicative of the formation of a reabsorptive barrier responsive to mechanical stimulation: ZO-1 (tight junction), paxillin (focal adhesions) and acetylated α-tubulin (primary cilia). HK-2 and RPTEC aligned in the direction of ridge/groove topography of the membrane in the device, evidence that the device has mechanical control over cell response. This topographically-patterned porous membrane provides an in vitro platform on which to model reabsorptive barriers with meaningful applications for understanding biological transport phenomenon, underlying disease mechanisms, and drug toxicity.

The use of poly(N-[2-hydroxypropyl]-methacrylamide) hydrogel to repair a T10 spinal cord hemisection in rat: a behavioural, electrophysiological and anatomical examination

There have been considerable interests in attempting to reverse the deficit because of an SCI (spinal cord injury) by restoring neural pathways through the lesion and by rebuilding the tissue network. In order to provide an appropriate micro-environment for regrowing axotomized neurons and proliferating and migrating cells, we have implanted a small block of pHPMA [poly N-(2-hydroxypropyl)-methacrylamide] hydrogel into the hemisected T10 rat spinal cord. Locomotor activity was evaluated once a week during 14 weeks with the BBB rating scale in an open field. At the 14th week after SCI, the reflexivity of the sub-lesional region was measured. We also monitored the ventilatory frequency during an electrically induced muscle fatigue known to elicit the muscle metaboreflex and increase the respiratory rate. Spinal cords were then collected, fixed and stained with anti-ED-1 and anti-NF-H antibodies and FluoroMyelin. We show in this study that hydrogel-implanted animals exhibit: (i) an improved locomotor BBB score, (ii) an improved breathing adjustment to electrically evoked isometric contractions and (iii) an H-reflex recovery close to control animals. Qualitative histological results put in evidence higher accumulation of ED-1 positive cells (macrophages/monocytes) at the lesion border, a large number of NF-H positive axons penetrating the applied matrix, and myelin preservation both rostrally and caudally to the lesion. Our data confirm that pHPMA hydrogel is a potent biomaterial that can be used for improving neuromuscular adaptive mechanisms and H-reflex responses after SCI.

Sciatic nerve repair with tissue engineered nerve: Olfactory ensheathing cells seeded poly(lactic-co-glygolic acid) conduit in an animal model

BACKGROUND AND AIM

Synthetic nerve conduits have been sought for repair of nerve defects as the autologous nerve grafts causes donor site morbidity and possess other drawbacks. Many strategies have been investigated to improve nerve regeneration through synthetic nerve guided conduits. Olfactory ensheathing cells (OECs) that share both Schwann cell and astrocytic characteristics have been shown to promote axonal regeneration after transplantation. The present study was driven by the hypothesis that tissue-engineered poly(lactic-co-glycolic acid) (PLGA) seeded with OECs would improve peripheral nerve regeneration in a long sciatic nerve defect.

MATERIALS AND METHODS

Sciatic nerve gap of 15 mm was created in six adult female Sprague-Dawley rats and implanted with PLGA seeded with OECs. The nerve regeneration was assessed electrophysiologically at 2, 4 and 6 weeks following implantation. Histopathological examination, scanning electron microscopic (SEM) examination and immunohistochemical analysis were performed at the end of the study.

RESULTS

Nerve conduction studies revealed a significant improvement of nerve conduction velocities whereby the mean nerve conduction velocity increases from 4.2 ΁ 0.4 m/s at week 2 to 27.3 ΁ 5.7 m/s at week 6 post-implantation (P < 0.0001). Histological analysis revealed presence of spindle-shaped cells. Immunohistochemical analysis further demonstrated the expression of S100 protein in both cell nucleus and the cytoplasm in these cells, hence confirming their Schwann-cell-like property. Under SEM, these cells were found to be actively secreting extracellular matrix.

CONCLUSION

Tissue-engineered PLGA conduit seeded with OECs provided a permissive environment to facilitate nerve regeneration in a small animal model.

The role of immunophilin ligands in nerve regeneration

Tacrolimus (FK506) is a widely used immunosuppressant in organ transplantation. However, it also has neurotrophic activity that occurs independently of its immunosuppressive effects. Other neurotrophic immunophilin ligands that do not exhibit immunosuppression have subsequently been developed and studied in various models of nerve injury. This article reviews the literature on the use of tacrolimus and other immunophilin ligands in peripheral nerve, cranial nerve and spinal cord injuries. The most convincing evidence of enhanced nerve regeneration is seen with systemic administration of tacrolimus in peripheral nerve injury, although clinical use is limited due to its immunosuppressive side effects. Local tacrolimus delivery to the site of nerve repair in peripheral and cranial nerve injury is less effective but requires further investigation. Tacrolimus can enhance outcomes in nerve allograft reconstruction and accelerates reinnervation of complex functional allograft transplants. Other non-immunosuppressive immunophilins ligands such as V-10367 and FK1706 demonstrate enhanced neuroregeneration in the peripheral nervous system and CNS. Mixed results are found in the application of immunophilin ligands to treat spinal cord injury. Immunophilin ligands have great potential in the treatment of nerve injury, but further preclinical studies are necessary to permit translation into clinical trials.

Polymers for Fabricating Nerve Conduits

Peripheral nerve regeneration is a complicated and long-term medical challenge that requires suitable guides for bridging nerve injury gaps and restoring nerve functions. Many natural and synthetic polymers have been used to fabricate nerve conduits as well as luminal fillers for achieving desired nerve regenerative functions. It is important to understand the intrinsic properties of these polymers and techniques that have been used for fabricating nerve conduits. Previously extensive reviews have been focused on the biological functions and in vivo performance of polymeric nerve conduits. In this paper, we emphasize on the structures, thermal and mechanical properties of these naturally derived synthetic polymers, and their fabrication methods. These aspects are critical for the performance of fabricated nerve conduits. By learning from the existing candidates, we can advance the strategies for designing novel polymeric systems with better properties for nerve regeneration.

Rapid Prototyping a Double-layer Polyurethane—collagen Conduit and its Schwann Cell Compatibility

A new double-layer conduit that combined an outer synthetic Polyurethane (PU) layer and inner natural collagen layer was fabricated via a double-nozzle low-temperature deposition manufacturing (DLDM) technology. The outer PU layer provided a mechanically stable tunnel against scar tissue invasion in vivo, while the inner collagen layer promoted Schwann cell adhesion, migration, and proliferation. Microporous structures were found in both the layers. A tight connection between the double layers was achieved by adjusting the distance between the two deposit nozzles and adjusting other processing parameters. Schwann cells from rat sciatic nerves were cultured in the layered PU-collagen conduits for one week; a significant enhancement in their retention and viability was seen compared to those made of pure PU. The poly(urethane-collagen) double layer conduit had better Schwann cell compatibility and so has a great potential use in clinical peripheral nerve repair.

Electrospun micro- and nanofiber tubes for functional nervous regeneration in sciatic nerve transections

Background

Although many nerve prostheses have been proposed in recent years, in the case of consistent loss of nervous tissue peripheral nerve injury is still a traumatic pathology that may impair patient's movements by interrupting his motor-sensory pathways. In the last few decades tissue engineering has opened the door to new approaches;: however most of them make use of rigid channel guides that may cause cell loss due to the lack of physiological local stresses exerted over the nervous tissue during patient's movement. Electrospinning technique makes it possible to spin microfiber and nanofiber flexible tubular scaffolds composed of a number of natural and synthetic components, showing high porosity and remarkable surface/volume ratio.

Results

In this study we used electrospun tubes made of biodegradable polymers (a blend of PLGA/PCL) to regenerate a 10-mm nerve gap in a rat sciatic nerve in vivo. Experimental groups comprise lesioned animals (control group) and lesioned animals subjected to guide conduits implantated at the severed nerve stumps, where the tubular scaffolds are filled with saline solution. Four months after surgery, sciatic nerves failed to reconnect the two stumps of transected nerves in the control animal group. In most of the treated animals the electrospun tubes induced nervous regeneration and functional reconnection of the two severed sciatic nerve tracts. Myelination and collagen IV deposition have been detected in concurrence with regenerated fibers. No significant inflammatory response has been found. Neural tracers revealed the re-establishment of functional neuronal connections and evoked potential results showed the reinnervation of the target muscles in the majority of the treated animals.

Conclusion

Corroborating previous works, this study indicates that electrospun tubes, with no additional biological coating or drug loading treatment, are promising scaffolds for functional nervous regeneration. They can be knitted in meshes and various frames depending on the cytoarchitecture of the tissue to be regenerated. The versatility of this technique gives room for further scaffold improvements, like tuning the mechanical properties of the tubular structure or providing biomimetic functionalization. Moreover, these guidance conduits can be loaded with various fillers like collagen, fibrin, or self-assembling peptide gels or loaded with neurotrophic factors and seeded with cells. Electrospun scaffolds can also be synthesized in different micro-architectures to regenerate lesions in other tissues like skin and bone.

Enhanced osteoblast‐like cell adhesion and proliferation using sulfonate‐bearing polymeric scaffolds

Orthopedic malfunction, degeneration, or damage remains a serious healthcare issue despite advances in medical technology. Proactive extracellular matrix (ECM)-mimetic scaffolds are being researched to orchestrate the activation of diverse osteogenic signaling cascades, facilitating osteointegration. We hypothesized that sulfonated functionalities incorporated into synthetic hydrogels would simulate anionic, sulfate-bearing proteoglycans, abundant in the ECM. Using this rationale, we successfully developed differentially sulfonated hydrogels, polymerizing a range of sulfopropyl acrylate potassium-acrylamide (SPAK-AM) mole ratios as monomer feeds under room temperature conditions. For anchorage-dependent cells, such as osteoblasts, adhesion is a critical prerequisite for subsequent osteointegration and cell specialization. The introduction of the sulfonated monomer, SPAK, resulted in favorable uptake of serum proteins with proportional increase in adhesion and proliferation rates of model cell lines, which included NIH/3T3 fibroblasts, MG-63 osteoblasts, and MC3T3-E1 subclone 4 preosteoblasts. In fact, higher proportions of sulfonate content (pSPAK75, pSPAK100) exhibited comparable or even higher degrees of adhesion and proliferation, relative to commercial grade tissue culture polystyrene in vitro. These results indicate promising potentials of sulfonated ECM-mimetic hydrogels as potential osteogenic tissue engineering scaffolds.

Present status and future potential of enhancing bone healing using nanotechnology

An overview of the current state of tissue engineering material systems used in bone healing is presented. A variety of fabrication processes have been developed that have resulted in porous implant substrates that can address unresolved clinical problems. The merits of these biomaterial systems are evaluated in the context of the mechanical properties and biomedical performances most suitable for bone healing. An optimal scaffold for bone tissue engineering applications should be biocompatible and act as a 3D template for in vitro and in vivo bone growth; in addition, its degradation products should be non-toxic and easily excreted by the body. To achieve these features, scaffolds must consist of an interconnected porous network of micro- and nanoscale to allow extensive body fluid transport through the pores, which will trigger bone ingrowth, cell migration, tissue ingrowth, and eventually vascularization.

Fabrication and characterization of hydrophilized porous PLGA nerve guide conduits by a modified immersion precipitation method

Nerve guide conduits (NGCs) with selective permeability and hydrophilicity were fabricated using poly(lactic-co-glycolic acid) (PLGA) and Pluronic F127 by a modified immersion precipitation method developed by our laboratory. The hydrophilized porous PLGA tubes as NGCs were fabricated by immersing a water-saturated rod-shape alginate hydrogel into PLGA/Pluronic F127 mixture solution (in tetraglycol). The PLGA/Pluronic F127 mixture was precipitated outside the alginate hydrogel rod by the diffusion of water from the hydrogel rod into PLGA/Pluronic F127 mixture solution. The inner diameter and wall thickness of tubes could be easily controlled by adjusting the diameter of alginate hydrogel rod and immersion time, respectively. It was observed that the tube wall has an asymmetric column-shape porous structure. The inner surface of the tube had nano-size pores ( approximately 50 nm), which can effectively prevent from fibrous tissue infiltration but permeate nutrients and retain neurotrophic factors, while the outer surface had micro-size pores ( approximately 50 microm), which can allow vascular ingrowth for effective supply of nutrients and oxygen into the tube. From the investigations of mechanical property, water absorbabiliy, and model nutrient permeability of the tubes, the hydrophilized PLGA/F127 (3 wt %) tube seems to be a good candidate as a NGC for the effective permeation of nutrients as well as the good mechanical strength to maintain a stable support structure for the nerve regeneration.

Enzyme-degradable phosphorylcholine porous hydrogels cross-linked with polyphosphoesters for cell matrices

Biodegradable highly porous hydrogels composed of poly [2-methacryloyloxyethyl phosphorylcholine (MPC)] cross-linked with polyphosphoesters have been prepared as novel cellular matrices. Well-controlled porous hydrogels were fabricated by using potassium hydrogen carbonate as a porogen salt for forming gas. This process enabled the homogeneous expansion of pores within the polymer hydrogel matrices, leading to well-interconnected high porosity. The mechanical properties of the hydrogels were influenced by the cross-linking density and porous structure. Hydrolysis and enzymatic digestion of the hydrogels were determined under basic conditions. The cross-linking density and porosity influenced the rate of degradation of the hydrogels. Acceleration of the degradation with alkaline phosphatase was also observed. Cultivation of mouse osteoblastic cell (MC3T3-E1) was performed in the highly porous hydrogels and cell viability was well maintained. The rate of cell proliferation also was relatively increased with an increase in the amount of polyphosphoesters in the hydrogel. Basic fibroblast growth factor (bFGF) was physically absorbed by the hydrogels and effectively induced cell proliferation. In conclusion, the porous hydrogels prepared in this study contributed a suitable environment for three-dimensional cell cultivation and may be useful for cell and tissue matrices.

Interaction of cells and nanofiber scaffolds in tissue engineering

Nanofibers and nanomaterials are potentially recent additions to materials in relation to tissue engineering (TE). TE is the regeneration of biological tissues through the use of cells, with the aid of supporting structures and biomolecules. Mimicking architecture of extracellular matrix is one of the challenges for TE. Biodegradable biopolymer nanofibers with controlled surface and internal molecular structures can be electrospun into mats with specific fiber arrangement and structural integrity for drug delivery and TE applications. The polymeric materials are widely accepted because of their ease of processability and amenability to provide a large variety of cost-effective materials, which help to enhance the comfort and quality of life in modern biomedical and industrial society. Today, nanotechnology and nanoscience approaches to scaffold design and functionalization are beginning to expand the market for drug delivery and TE is forming the basis for highly profitable niche within the industry. This review describes recent advances for fabrication of nanofiber scaffolds and interaction of cells in TE.

Mechanical and morphological characterization of homogeneous and bilayered poly(2-hydroxyethyl methacrylate) scaffolds for use in CNS nerve regeneration

Homogeneous and bilayered macroporous poly(2-hydroxyethyl methacrylate), p(HEMA), hydrogel scaffolds were examined as possible matrices for nerve regeneration in the CNS. An important issue to consider for a CNS scaffold is that it must be able to closely mimic the natural tissue it is replacing, while remaining intact, and mechanically stable enough to allow for regenerating axons to elongate through it. Phase-separated homogeneous and bilayered p(HEMA) scaffolds were fabricated, by varying water, crosslinking, and initiating agents; all of which directly affected the mechanical properties of the polymer. An increase in water concentration resulted in a decrease in the modulus for a given crosslinking and initiating concentration for all homogenous scaffolds, but the same result was not evident in the bilayered scaffolds. The distinct regions within the bilayered scaffolds generate a matrix, containing both a highly porous region with modulus values representative of spinal cord tissue, as well as a nonporous region that provides overall mechanical stability to the entire implant. The overall result is a composite matrix for possible use in CNS nerve regeneration, which mimics the mechanical properties of spinal tissue, but can withstand the forces that it will be subjected to in the injury site.

Fabrication of semipermeable hollow fiber membranes with highly aligned texture for nerve guidance

In order to improve the guidance potential of a nerve entubulation bridging device, highly aligned textures were formed on the inner surface of semipermeable hollow fiber membranes (HFMs) during the wet phase inversion process. By precisely controlling the fabrication parameters, such as polymer solution flow rate, coagulant solution flow rate, and the air-gap distance, also called drop height, different-sized aligned grooves can be fabricated on the inner surface of HFMs. Preliminary studies using in vitro dorsal root ganglion (DRG) regeneration assay showed that both the alignment and outgrowth rate of regenerating axons increased significantly on HFMs with aligned textures compared to those on HFMs with a smooth inner surface. Studies in progress are evaluating axonal outgrowth and regeneration using in vivo sciatic-nerve and spinal-cord-injury models.

The effect of high outflow permeability in asymmetric poly(dl-lactic acid-co-glycolic acid) conduits for peripheral nerve regeneration

This study attempted to accelerate the peripheral nerve regeneration, using the high outflow rate of asymmetric poly(dl-lactic acid-co-glycolic acid) (PLGA) nerve conduits. Asymmetric PLGA nerve conduits of monomer ratio 85/15 were prepared by immersion-precipitation method to serve as possible materials. In this study, mandrels were immersed into a 20% (wt/wt) of PLGA/1,4-dioxane solution and precipitated in a non-solvent bath followed by freeze-drying. Different concentrations of isopropyl alcohol (95%, 40% and 20%) were used as precipitation baths where non-asymmetric (95%) and asymmetric (40% and 20%) conduits could easily form. The asymmetric nerve conduits that consisted of macrovoids on the outer layer, and interconnected micropores in the inner sublayer, possessed characters of larger outflow rate than inflow rate. The asymmetric conduits were implanted to 10mm right sciatic nerve defects in rats. Autografts, silicone and non-asymmetric PLGA conduits were performed as the control and the contrast groups. Implanted graft specimens of all groups were harvested for histological analysis at 4 and 6 weeks following surgery. The asymmetric PLGA conduits maintained a stable supporting structure and inhibited exogenous cells invasion during entire regeneration process. Asymmetric PLGA conduits were found to have statistically greater number of regenerated axons at the midconduit and distal nerve site of implanted grafts, as compared to the silicone and non-asymmetric groups at 4 and 6 weeks. Of interest was that the results of 4 weeks in asymmetric groups were better than the non-asymmetric groups at 6 weeks in number of axons. According to the results of permeability, the asymmetric structure in the conduit wall seemed to enhance the removal of the blockage of the waste drain from the inner inflamed wound in the early stage, which may have improved the efficacy of the peripheral nerve regeneration. The asymmetric structure could be adequately employed in the future as optimal nerve conduits in peripheral nerve regeneration.

Poly(lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold

Mass transfer limitations of scaffolds are currently hindering the development of 3-dimensional, clinically viable, tissue engineered constructs. We have developed a poly(lactide-co-glycolide) (PLGA) hollow fibre membrane scaffold that will provide support for cell culture, allow psuedovascularisation in vitro and provide channels for angiogenesis in vivo. We produced P(DL)LGA flat sheet membranes using 1, 4-dioxane and 1-methyl-2-pyrrolidinone (NMP) as solvents and water as the nonsolvent, and hollow fibre membranes, using NMP and water, by dry/wet- and wet-spinning. The resulting fibres had an outer diameter of 700 micro m and an inner diameter of 250 micro m with 0.2-1.0 micro m pores on the culture surface. It was shown that varying the air gap and temperature when spinning changed the morphology of the fibres. The introduction of a 50 mm air gap caused a dense skin of 5 micro m thick to form, compared to a skin of 0.5 micro m thick without an air gap. Spinning at 40 degrees C produced fibres with a more open central section in the wall that contained more, larger macrovoids compared to fibres spun at 20 degrees C. Culture of the immortalised osteogenic cell line 560pZIPv.neo (pZIP) was carried out on the P(DL)LGA flat sheets in static culture and in a P(DL)LGA hollow fibre bioreactor under counter-current flow conditions. Attachment and proliferation was statistically similar to tissue culture polystyrene on the flat sheets and was also successful in the hollow fibre bioreactor. The P(DL)LGA hollow fibres are a promising scaffold to address the size limitations currently seen in tissue engineered constructs.

Poly(phosphoester) ionomers as tissue-engineering scaffolds

Regenerative medicine requires scaffolds of divergent physicochemical properties for different tissue-engineering applications. To this end, a series of biodegradable poly(phosphoester) ionomers of the general composition [p(BHET-EOP-HOP/TC)] was synthesized, with BHET(bis-hydroxyl ethylene phosphate):EOP(ethylene phosphate):HOP(free phosphate) ratios of 60:20:20, 70:10:20, and 75:5:20, respectively. The 60/20/20 ionomer possessed the best tensile properties, exhibiting an average tensile modulus of 68 MPa and strain at break of 31%. Calcium treatment of the ionomer films led to significantly higher hardness and elastic moduli as measured by indentation. Calcium binding was evident from the increase in glass transition and melting temperatures, and a shift in the P-->O absorption in the FTIR spectrum. Stable N-hydroxysuccinimide ester (NHS) of the ionomers could be synthesized to facilitate derivatization, as demonstrated by conjugation of GRGDS in this study. The polymers conjugated with NHS were hydrolyzed in a biphasic mode, with a fast initial phase occurring in the first few hours, followed by a slower phase in the next few days. These ionomers represent a novel class of biomaterials with readily controllable physical and chemical attributes for tissue engineering.

Peripheral nerve regeneration by microbraided poly(L-lactide-co-glycolide) biodegradable polymer fibers

Tiny tubes with fiber architecture were developed by a novel method of fabrication upon introducing some modification to the microbraiding technique, to function as nerve guide conduit and the feasibility of in vivo nerve regeneration was investigated through several of these conduits. Poly(L-lactide-co-glycolide) (10:90) polymer fibers being biocompatible and biodegradable were used for the fabrication of the conduits. The microbraided nerve guide conduits (MNGCs) were characterized using scanning electron microscopy to study the surface morphology and fiber arrangement. Degradation tests were performed and the micrographs of the conduit showed that the degradation of the conduit is by fiber breakage indicating bulk hydrolysis of the polymer. Biological performances of the conduits were examined in the rat sciatic nerve model with a 12-mm gap. After implantation of the MNGC to the right sciatic nerve of the rat, there was no inflammatory response. One week after implantation, a thin tissue capsule was formed on the outer surface of the conduit, indicating good biological response of the conduit. Fibrin matrix cable formation was seen inside the MNGC after 1 week implantation. One month after implantation, 9 of 10 rats showed successful nerve regeneration. None of the implanted tubes showed tube breakage. The MNGCs were flexible, permeable, and showed no swelling apart from its other advantages. Thus, these new poly(L-lactide-co-glycolide) microbraided conduits can be effective aids for nerve regeneration and repair and may lead to clinical applications.

Peripheral nerve regeneration with sustained release of poly(phosphoester) microencapsulated nerve growth factor within nerve guide conduits

Prolonged delivery of neurotrophic proteins to the target tissue is valuable in the treatment of various disorders of the nervous system. We have tested in this study whether sustained release of nerve growth factor (NGF) within nerve guide conduits (NGCs), a device used to repair injured nerves, would augment peripheral nerve regeneration. NGF-containing polymeric microspheres fabricated from a biodegradable poly(phosphoester) (PPE) polymer were loaded into silicone or PPE conduits to provide for prolonged, site-specific delivery of NGF. The conduits were used to bridge a 10 mm gap in a rat sciatic nerve model. Three months after implantation, morphological analysis revealed higher values of fiber diameter, fiber population and fiber density and lower G-ratio at the distal end of regenerated nerve cables collected from NGF microsphere-loaded silicone conduits, as compared with those from control conduits loaded with either saline alone, BSA microspheres, or NGF protein without microencapsulation. Beneficial effects on fiber diameter, G-ratio and fiber density were also observed in the permeable PPE NGCs. Thus, the results confirm a long-term promoting effect of exogenous NGF on morphological regeneration of peripheral nerves. The tissue-engineering approach reported in this study of incorporation of a microsphere protein release system into NGCs holds potential for improved functional recovery in patients whose injured nerves are reconstructed by entubulation.

Polyphosphoesters in drug and gene delivery

Polymers with repeating phosphoester bonds in the backbone are structurally versatile, and biodegradable through hydrolysis, and possibly enzymatic digestion at the phosphoester linkages under physiological conditions. These biodegradable polyphosphoesters are appealing for biological and pharmaceutical applications because of their potential biocompatibility and similarity to bio-macromolecules such as nucleic acids. In the first part of this review, we will focus on one particular structure synthesized by extending oligomeric lactide prepolymers with ethylphosphate groups. This amorphous to semi-crystalline polymer is promising in delivering anti-cancer therapeutics in the form of microspheres. In the second half, we will discuss the conjugation of charged groups to the side chain of the phosphate, constituting one of the few biodegradable cationic polymers in the field for non-viral gene delivery. Capable of delivering exogenous genes to a cell nucleus or providing an extracellular sustained release of DNA, these cationic polyphosphoesters also serve as a valuable model to understand the important characteristics that render a polymer an effective gene carrier.

A new nerve guide conduit material composed of a biodegradable poly(phosphoester)

There is a resurgence of interest in the development of degradable and biocompatible polymers for fabrication of nerve guide conduits (NGCs) in recent years. Poly(phosphoester) (PPE) polymers are among the attractive candidates in this context, in view of their high biocompatibility, adjustable biodegradability, flexibility in coupling fragile biomolecules under physiological conditions and a wide variety of physicochemical properties. The feasibility of using a biodegradable PPE, P(BHET-EOP/TC), as a novel NGC material was investigated. Two types of conduits were fabricated by using two batches of P(BHET-EOP/TC) with different weight-average molecular weights (Mw) and polydispersity indexes (PI). The polymers as well as conduits were non-toxic to all six types of cells tested, including primary neurones and neuronally differentiated PC12 cells. After in situ implantation in the sciatic nerve of the rat, two types of conduits triggered a similar tissue response, inducing the formation of a thin tissue capsule composed of approximately eight layers of fibroblasts surrounding the conduits at 3 months. Biological performances of the conduits were examined in the rat sciatic nerve model with a 10 mm gap. Although tube fragmentation, even tube breakage, was observed within less than 5 days post-implantation, successful regeneration through the gap occurred in both types of conduits, with four out of 10 in the Type I conduits (Mw 14,900 and PI 2.57) and 11 out of 12 in the Type II conduits (Mw 18,900 and PI 1.72). The degradation of conduits was further evidenced by increased roughness on the tube surface in vivo under scanning electron microscope and a mass decrease in a time-dependent manner in vitro. The Mw of the polymers dropped 33 and 24% in the Type I and II conduits, respectively, in vitro within 3 months. Among their advantages over other biodegradable NGCs, the PPE conduits showed negligible swelling and no crystallisation after implantation. Thus, these PPE conduits can be effective aids for nerve regeneration with potential to be further developed into more sophisticated NGCs that have better control of the conduit micro-environment for improved nerve regeneration.