Starch from hull-less barley: V. In-vitro susceptibility of waxy, normal, and high-amylose starches towards hydrolysis by alpha-amylases and amyloglucosidase

Near infrared spectroscopy combined with chemometrics as tool to monitor starch hydrolysis

The objective of this study was to evaluate the feasibility of using near infrared (NIR) spectroscopy combined with principal component analysis (PCA) and partial least squares (PLS) regression to monitor the in vitro hydrolysis of different starch substrates. Potato and rice starches, and pre-gelatinised corn starch were used, where samples collected at different time points (5 to 120 min) during the in vitro hydrolysis and analysed using a Fourier transform NIR instrument with a gold-coated integrating sphere (diffuse reflection). PLS regression models between the spectra and reference data yield a coefficient of determination in cross validation (R2CV) and standard error in cross validation (SECV) of 0.94 and 1105. 8 μg mL-1; 0.81 and 440.81 μg mL-1; 0.45 and 338 μg mL-1; 0.70 and 276 μg mL-1; 0.75 and 296. 2 μg mL-1 for the prediction of the concentration of maltose using all samples, rice and potato combined, and pre-gelatinised corn, potato and rice starches analysed separately, respectively. It was concluded that the combination of NIR spectroscopy with both PCA and PLS regression might provide with a rapid and efficient tool to rapidly monitor changes that occur during the in vitro hydrolysis of starch.

Multi-Scale Structural Insights into Enzymatically Hydrolyzed Lentil Starch Concentrates Prepared by In Vitro Method Using Different Types of Enzymes

This study was undertaken to investigate the enzymatic hydrolysis of lentil starch concentrates from conventional cooked seeds (CCLSC) by the action of different types of enzymes, including pancreatin (PC-EHSC), heat-stable α-amylase (HS-EHSC), β-amylase (βA-EHSC), amyloglucosidase (AMG-EHSC), and multi-enzymes (βA-HS-AMG-EHSC); their multi-scale structural characteristics of the enzymatic hydrolysis products of lentil starch concentrates were compared. The morphological features distinguished among different samples. The Fourier-transform infrared spectroscopy and solid-state ¹³C CP/MAS NMR spectral features indicated the possible formation of a binary and ternary complex among amylose, protein and lipids. The X-ray diffraction results revealed that the V-type characteristic diffraction peaks were more obvious for samples including PC-EHSC and βA-EHSC, which was in line with their lowest polydispersity index (DP_n). PC-EHSC and βA-EHSC also showed an increased peak intensity of the scattering maximum on the small-angle X-ray scattering spectra, whereas CCLSC exhibited an overall lower peak intensity within the studied q range of scattering. The highest XRD crystallinity and the lowest DP_n value obtained for PC-EHSC indicated that the starch polymers modified by pancreatin could produce glucan chains with a comparatively homogenous M_w distribution that are readily recrystallized by hydrogen bonding through chain aggregation. Comparatively, the lowest relative crystallinity for HS-EHSC obtained from XRD suggested that thermostable α-amylolysis was unfavorable for the formation of starch structure with a higher degree of molecular order. This study could provide useful information for the needed research to obtain a deeper understanding of the impact of different amylolysis actions on the structural organization of starch hydrolysates and to provide a theoretical foundation for the development of fermentable enzymatically hydrolyzed starch with well-tailored physiological properties.

Importance of Inactivation Methodology in Enzymatic Processing of Raw Potato Starch: NaOCl as Efficient α-Amylase Inactivation Agent

Efficient inactivation of microbial α-amylases (EC 3.2.1.1) can be a challenge in starch systems as the presence of starch has been shown to enhance the stability of the enzymes. In this study, commonly used inactivation methods, including multistep washing and pH adjustment, were assessed for their efficiency in inactivating different α-amylases in presence of raw potato starch. Furthermore, an effective approach for irreversible α-amylase inactivation using sodium hypochlorite (NaOCl) is demonstrated. Regarding inactivation by extreme pH, the activity of five different α-amylases was either eliminated or significantly reduced at pH 1.5 and 12. However, treatment at extreme pH for 5 min, followed by incubation at pH 6.5, resulted in hydrolysis yields of 42–816% relative to controls that had not been subjected to extreme pH. “Inactivation” by multistep washing with water, ethanol, and acetone followed by gelatinization as preparation for analysis gave significant starch hydrolysis compared to samples inactivated with NaOCl before the wash. This indicates that the further starch degradation observed in samples subjected to washing only took place during the subsequent gelatinization. The current study demonstrates the importance of inactivation methodology in α-amylase-mediated raw starch depolymerization and provides a method for efficient α-amylase inactivation in starch systems.

Barley, an Undervalued Cereal for Poultry Diets: Limitations and Opportunities

Simple Summary

With the ever-increasing demand for poultry products, the continuous supply of conventional cereal grains such as maize has become a challenge. Barley has been recognised as a potential alternative feed ingredient that can replace common cereal grains in poultry diets. However, due to several limitations such as the presence of various anti-nutritive factors and the variability in nutrient composition and quality, the use of barley in poultry diets remains comparatively low. The previous findings on the optimum use of barley in poultry diets are also inconsistent primarily due to differences in research methodologies. The importance of using accurate nutrient profiles for specific barley cultivars to formulate barley-based diets is emphasised in this review. Moreover, the need to adapt feed processing conditions suitable to different barley cultivars to increase the inclusion of barley in poultry diets is highlighted in this review.

Abstract

The supply of conventional cereal grains, especially of maize, will be a significant constraint to the future growth of the poultry industry. Various alternative feed ingredients are being tested to replace maize in poultry diets. Barley (Hordeum vulgare L.) is one such feed ingredient, the use of which remains limited in poultry diets due to its low metabolisable energy, presence of anti-nutritive, soluble non-starch polysaccharides and consequent inter-cultivar variability. Differences in research methodologies used in published studies have also contributed to the inconsistent findings, preventing a good understanding of the nutritional value of barley for poultry. The importance of using accurate nutrient profiles, specifically metabolisable energy and digestible amino acids, for specific barley cultivars to formulate barley-based diets is emphasised. Nutritionists should also pay close attention to feed processing conditions tailored to the specific barley cultivars to increase the barley inclusion in poultry diets.

Effect of enzymatic hydrolysis on digestibility and morpho-structural properties of hydrothermally pre-treated red rice starch

The objective of this work was to evaluate the effects of enzymatic hydrolysis on digestibility and morphological and structural properties of hydrothermally pre-treated (HPT) red rice starch. The pre-treatments were performed in autoclave and cooking for the modification of rice grains and native starch. In vitro starch digestibility was performed consecutively and semi-simultaneously using α-amylase and amyloglucosidase. A first-order mathematical model was used to adjust the hydrolysis kinetic data, which made it possible to calculate the surface area, hydrolysis index, and glycemic index of the starch. Scanning electron microscopy images (SEM), Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) were also performed to investigate the characteristics of the post-hydrolysis starch samples. The autoclaved starch HSS-A3, which was subjected to 121 °C/1.08 bar for 10 min, showed the highest in vitro digestibility values (80.08 %). Both starch samples showed increase of particle size and enzymatic digestibility after HPT. FTIR spectra of the starch samples showed that there was no appearance of new functional groups. However, XRD evidenced that HPT changed the intensity of the peaks and the type of crystallinity was changed for autoclaved starch (A3) from type A to Vh, with crystallinity ranging from 21.71 % to 26.42 %. The semi-simultaneous approach showed more advantages due to the highest in vitro digestibility as well as reducing the processing time and use of reagents.

Physicochemical properties of A- and B-type granules isolated from waxy and normal hull-less barley starch

Large A-type and small B-type starch granules separated from waxy and normal hull-less barley starches were investigated for their physicochemical properties. Hull-less barley starch granules were covered by a membrane composed mainly of phospholipids. Channels of waxy A- and B-type granules were rich in proteins and phospholipids. Compared with A-type starch, B-type starch exhibited higher specific surface area, volume and average diameter of mesopores. Waxy A-type granules exhibited the higher peak, breakdown, final and setback viscosity than did B-type granules, while normal A-type granules showed the lower peak, breakdown, final viscosity and the higher setback viscosity than did B-type granules. B-type starch gels with lower storage modulus exhibited a less elastic gel network structure and retrograded more slowly. Moreover, in vitro hydrolysis of starch showed that the B-type granules exhibited a higher hydrolysis extent and rate than the A-type granules in the first stage, which was consistent with higher initial α-amylase binding ability of B-type granules. The study showed that the A-type and B-type starch separated from waxy and normal hull-less barley exhibited very different physicochemical properties.

Structural factors governing starch digestion and glycemic responses and how they can be modified by enzymatic approaches: A review and a guide

Starch is the most abundant glycemic carbohydrate in the human diet. Consumption of starch-rich food products that elicit high glycemic responses has been linked to the occurrence of noncommunicable diseases such as cardiovascular disease and diabetes mellitus type II. Understanding the structural features that govern starch digestibility is a prerequisite for developing strategies to mitigate any negative health implications it may have. Here, we review the aspects of the fine molecular structure that in native, gelatinized, and gelled/retrograded starch directly impact its digestibility and thus human health. We next provide an informed guidance for lowering its digestibility by using specific enzymes tailoring its molecular and three-dimensional supramolecular structure. We finally discuss in vivo studies of the glycemic responses to enzymatically modified starches and relevant food applications. Overall, structure-digestibility relationships provide opportunities for targeted modification of starch during food production and improving the nutritional profile of starchy foods.

Highland barley starch (Qingke): Structures, properties, modifications, and applications

Highland barley (HB) is mainly composed of starch, which may account for up to 65% of the dry weight to the kernel. HB possesses unique physical and chemical properties and has good industrial application potential. It has also been identified as a minor grain crop with excellent nutritional and health functions. Highland barley starch (HBS) features a number of structural and functional properties that render it a useful material for numerous food and non-food applications. This review summarizes the current status of research on the extraction processes, chemical composition, molecular fine structures, granular morphology, physicochemical properties, digestibility, chemical and physical modifications, and potential uses of HBS. The findings provide a comprehensive reference for further research on HBS and its applications in various food and non-food industries.

Physicochemical Properties of Rice Flour Suspension Treated by Ultrahigh Hydrostatic Pressure

This study investigated the physicochemical properties of rice flour suspensions under ultrahigh hydrostatic pressure (UHP) treatment. Rice flour suspensions were subjected to 200, 400, and 600 MPa of pressure for 10 min, and heat treatment was used as a control. Proximate characteristics of different rice cultivar were analyzed to amylose, damage starch content, and particle size. Changes in physicochemical properties of rice flour suspensions according to UHP treatment were analyzed to microscopic structure, iodine reaction, α-amylase hydrolysis rate, and resistant starch content. Microscopic structural analyses showed that the structures of the rice flours were altered under both heat and 600 MPa treatment conditions. Water absorption rates were highest under heat treatment (467.53–554.85%), followed by 600 MPa treatment (269.55–334.57%). Iodine reaction values increased with increasing applied pressure. α-Amylase hydrolysis rates and resistant starch contents were highest under heat treatment and increased with increasing applied pressure. Based on these results, 600 MPa treatment of rice flour suspensions was shown to be comparable to heat treatment; as a result, the development of the new rice processing method with different physicochemical properties is expected from rice cultivars treated under UHP processing methods.

Impact of starch granule-associated channel protein on characteristic of and λ-carrageenan entrapment within wheat starch granules

This study investigated the physicochemical characteristics of protease-treated wheat starch (PT-WST) to understand the role of starch granule-associated proteins (SGAPs) and the potential capability of PT-WST to provide a nutrient delivery system (NDS). Protease treatment was conducted at 4 °C and 37 °C (PT04 and PT37), respectively. A model delivery system was assessed with PT37 granules infiltrated by λ-carrageenan (λC) under variations of molecular size (λC hydrolysates produced from 0, 2.5, 100, and 500 mM HCl solution), agitation time, and temperature. Protein-specific (3-(4-carboxybenzyl)quioline-2-carboxaldehyde) or non-reactive (methanolic merbromin) fluorescent dye staining revealed that removal of SGAPs on surfaces and channels were more effective for PT37 than for PT04. Consistent amylose content, swelling, and gelatinization temperature before and after protease treatment suggested minimal impact on the starch structure. PT37 presented higher solubility and pasting viscosity than PT04. This resulted from excessive SGAP removal, which enhanced entrapment capacity. λC molecular size and agitation temperature showed a negative correlation with the content of λC entrapped within PT37, and this content depended on the interplay between the agitation time and λC molecular size. As λC molecular size decreased, the λC distribution became uniform throughout the granules, which confirmed the potential of PT-WST as a carrier for NDS.

Fine regulation of the starch liquefaction process and its application in the production of citric acid

Citric acid (CA), generally fermented from the starchy material, has attracted intense attention because of its wide applications in many aspects. However, the traditional starchy-liquefaction process based on the dextrose equivalent value and iodine-testing method is inappropriate as it hinders the subsequent CA fermentations. Here, a novel method of evaluating the starch liquefaction in the CA production process was established. Firstly, dextrin samples with the molecular weight (M_w) narrow distribution were prepared by alcohol fractional precipitation. Glucoamylase (GM) from the culture of CA-producing strain Aspergillus niger was purified. Then, the structure-activity relationship between the dextrin and GM was analyzed. Results demonstrated that the M_w of liquefied components aggregated in the range of 1.4-1.9 kDa could improve the efficiency of simultaneous saccharification and fermentation process. CA production rate and total sugar uptake rate were evidently improved with residual total sugar decreasing by 10.8% and fermentation efficiency enhanced by 21.1% in 9 h shorter fermentation time. All these results confirmed that fine regulation of the starch liquefaction based on the M_w characteristics was feasible and effective to improve the CA fermentation. Our proposed strategy could also be useful for other fermentations and sugar industry involving the starchy material.

Endosperm enrichment and physicochemical properties of superior and inferior grain starch in super hybrid rice

A significant asynchronous phenomenon exists in super hybrid rice because of the differences in spike and spikelet positions, which affect the accumulation and properties of starch. However, little is known about the endosperm enrichment and physicochemical properties of starch in superior and inferior grains in super hybrid rice. Rice YY2640 was selected as study material to investigate the enrichment and physicochemical properties of starch in superior and inferior grains in super rice using semi-thin sections, X-ray diffraction and related technologies. Superior grain filling was a continuous process, whereas inferior grain only started 8-10 days after anthesis. The order of starch accumulation starts in the central endosperm, then in the endosperm of the proximal vascular bundle and finally in the aleurone layer. Compared with the inferior grains, the superior grains have a higher 1000-grain weight, apparent amylose content, total starch content, average starch granule size, relative crystallinity, solubility and a resonance peak ratio at 1022/995 cm^-1 , whereas the swelling power and ratio of the resonance peak at 1045/1022 cm^-1 were lower. The final degree of hydrolysis of HCl, AAG and PPA of the superior grains were significantly lower than those of the inferior grains. The findings indicate that the different physicochemical properties of starch were mainly related to the development order of superior and inferior grains and the spatial enrichment of starch.

Amylopectin structure and crystallinity explains variation in digestion kinetics of starches across botanic sources in an in vitro pig model

Background

Starch is the main source of energy in commonly used pig diets. Besides effects related to the extent of starch digestion, also several effects related to variation in digestion rate have recently been demonstrated in non-ruminants. Different rates of starch digestion in animals and in in vitro models have been reported, depending on the botanic origin of starch. Starches from different botanic sources differ widely in structural and molecular properties. Predicting the effect of starch properties on in vitro digestion kinetics based on existing literature is hampered by incomplete characterization of the starches, or by a selective choice of starches from a limited number of botanic sources. This research aimed to analyse the relationships between starch properties and in vitro digestion kinetics of pure starches isolated from a broad range of botanic origins, which are used in non-ruminant diets or have a potential to be used in the future. Therefore we studied starch digestion kinetics of potato, pea, corn, rice, barley, and wheat starches, and analysed the granule diameter, number of pores, type and amount of crystalline structure, amylose content and amylopectin side-chain length of all starches.

Results

Multivariate analysis revealed strong correlations among starch properties, leading us to conclude that effects of most starch characteristics are strongly interrelated. Across all analysed botanic sources, crystalline type and amylopectin chain length showed the strongest correlation with in vitro digestion kinetics. Increased percentages of A–type crystalline structure and amylopectin side chains of DP 6–24 both increased the rate of digestion. In addition, within, but not across, (clusters of) botanic sources, a decrease in amylose content and increase in number of pores correlated positively with digestion kinetics.

Conclusion

The type of crystalline structure and amylopectin chain length distribution of starch correlate significantly with digestion kinetics of starches across botanic sources in an in vitro pig model. Variation in digestion kinetics across botanic sources is not additively explained by other starch properties measured, but appears to be confined within botanical sources.

Electronic supplementary material

The online version of this article (10.1186/s40104-018-0303-8) contains supplementary material, which is available to authorized users.

Effects of Different Isolation Media on Structural and Functional Properties of Starches from Root Tubers of Purple, Yellow and White Sweet Potatoes

Different-colored sweet potatoes have different contents of pigments and phenolic compounds in their root tubers, which influence the isolation of starch. It is important to justify the identification of the most suitable isolation medium of starch from different colored root tubers. In this study, starches were isolated from root tubers of purple, yellow and white sweet potatoes using four different extraction media, including H₂O, 0.5% Na₂S₂O₅, 0.2% NaOH, and both 0.5% Na₂S₂O₅ and 0.2% NaOH. Their structural and functional properties were investigated and compared among different extraction media. The results showed that the granule size, apparent amylose content, lamellar peak intensity, thermal properties, and pasting properties were different among different-colored sweet potatoes due to their different genotype backgrounds. The four extraction media had no significant effects on starch structural properties, including apparent amylose content, crystalline structure, ordered degree, and lamellar peak intensity, except that the NaOH and Na₂S₂O₅ treatment were able to increase the whiteness of purple and yellow sweet potato starches. The different extraction media had some effects on starch functional properties, including thermal properties, swelling power, water solubility, and pasting properties. The above results indicated that the H₂O was the most suitable extraction medium to simply and fast isolate starch from root tubers of different-colored sweet potatoes.

Modeling Starch Digestograms: Computational Characteristics of Kinetic Models for in vitro Starch Digestion in Food Research

Starch digestion is mostly investigated with in vitro techniques, and time-course measurements are common. These yield digestograms that are modeled by theoretical, semitheoretical, and empirical kinetic equations, many of which are reviewed here. The Duggleby model has Michaelis-Menten functions, and its dependent variable is on both sides of the equation with no apparent parameter for maximum digestible starch (D_∞ ). The Gaouar and Peleg models are equivalent. They predict both the initial digestible starch (D₀ ) and D_∞ , and an average digestion rate, but they can reveal "biratial" digestions. The first-order kinetic model exhibits diverse predictabilities and, when linearized, D_∞ is sometimes equated to 100 g/100 g dry starch (100%), it yields an average rate of digestion and can predict negative D₀ . The log of slope (LOS) model is unique in revealing the rapid-to-slow digestion rate phenomenon, but without guidelines to identify such. The LOS model does not sometimes use all the digestogram data, can predict D_∞ greater than 100%, and returns zero digestion rate for some digestograms. However, some starchy materials exhibit a slow-to-rapid digestion rate phenomenon, as demonstrated with an example. The modified first-order kinetic model uses all the digestogram data with practical constraints (D₀  ≥ 0 g/100 g dry starch; D_∞  ≤ 100 g/100 g dry starch), describes all digestograms, and yields an average digestion rate, but it can also be used for "biratial" digestions. In addition, the logistic and Weibull models are discussed. Using some published data, the computational characteristics of these commonly used models are presented with objective parameters to guide choices.

Comparison of structural and functional properties of starches from five fruit kernels

Starch was isolated from the kernels of jackfruit, longan, loquat, litchi, and mango fruits, which contained approximately 56, 59, 71, 53, and 64% starch, respectively, indicating that these fruit kernels are good starch sources. The structural and functional properties of these isolated starches were investigated and compared. The starches had irregular, truncated, spherical, and elliptical shapes with central hila and exhibited different sizes, with mango starch being the largest and jackfruit and longan starches being the smallest. The five starches had similar amylose contents but exhibited significantly different crystalline properties including crystalline type, relative crystallinity, short-range ordered structure, and lamellar intensity. Among the five starches, the jackfruit and loquat starches had the highest and lowest gelatinization temperature and enthalpy, respectively, and the litchi and mango starches had the highest and lowest pasting viscosity, respectively. The longan and loquat starches were more susceptible to enzyme hydrolysis than the other starches.

Comparison of Structural and Functional Properties of Starches from the Rhizome and Bulbil of Chinese Yam

Chinese yam is an important edible starch plant and widely cultivated in China. Its rhizome and bulbil are starch storage tissues below and above ground, respectively. In this paper, starches were isolated from the rhizome and bulbil of Chinese yam, and their structural and functional properties were compared. Both starches had an oval shape with an eccentric hilum and a CA-type crystalline structure. Their short-range ordered structure and lamellar structure had no significant difference. However, the rhizome starch had a significantly bigger granule size and lower amylose content than the bulbil starch. The swelling power and water solubility were significantly lower in the rhizome starch than in the bulbil starch. The onset and peak gelatinization temperatures were significantly higher in the rhizome starch than in the bulbil starch. The rhizome starch had a significantly higher breakdown viscosity and a lower setback viscosity than the bulbil starch. The thermal stability was lower in the rhizome starch than in the bulbil starch. The rhizome starch had a significantly lower resistance to hydrolysis and in vitro digestion than the bulbil starch. The above results provide important information for the utilization of rhizome and bulbil starches of Chinese yam.

Progress in High-Amylose Cereal Crops through Inactivation of Starch Branching Enzymes

High-amylose cereal starches provide many health benefits for humans. The inhibition or mutation of starch branching enzyme (SBE) genes is an effective method to develop high-amylose cereal crops. This review summarizes the development of high-amylose cereal crops through the inactivation of one or more SBE isoforms or combination with other genes. This review also reveals the causes of increase in amylose content in high-amylose crops. A series of changes, including amylopectin structure, crystalline structure, thermal properties, and hydrolysis properties, occurs as amylose content increases. The different morphological starch granules nominated as heterogeneous starch granules or differently stained starch granules are detected in high-amylose cereal crops. Detailed studies on four heterogeneous starch granules in high-amylose rice, which is developed by antisense RNA inhibition of SBEI/IIb, indicate that granules with different morphologies possess various molecular structures and physicochemical and functional properties. This variation diversifies their applications in food and non-food industries. However, current knowledge regarding how these heterogeneous starch granules form and why they exhibit regional distribution in endosperm remain largely unknown.