Influence of the nature of coupling agents on insulin adsorption on supports grafted with sialic acid for high-performance affinity chromatography

Monosize microbeads for pseudo-affinity adsorption of human insulin

Affinity adsorption technique is increasingly used for protein purification, separation and other biochemical applications. Therapeutic molecules such as antibodies, cytokines, therapeutic DNA and plasma proteins must be purified before characterization and utilization. The aim of this study was to prepare micronsized spherical polymeric beads and to investigate the extent of their human insulin adsorption capability. Monosize poly(ethylene glycol dimethacrylate-N-methacryloyl-(L)-histidine) [poly(EDMA-MAH)] beads were prepared by modified suspension copolymerization. Functional monomer (MAH) was synthesized using methacryloyl chloride and L-histidine. The beads were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, swelling test and elemental analysis. MAH incorporation into monosize polymeric beads, having an average size around 2-3 μm, was estimated as 55.3 μmol MAH/g bead. Equilibrium swelling ratios of poly(EDMA-MAH) and poly(EDMA) beads were 65% and 55%, respectively. Adsorption experiments were performed under different conditions (i.e., pH, temperature, protein concentration and ionic strength). It was found that adsorption characteristics are strongly depend on these conditions. Maximum insulin adsorption capacity was achieved as 24.7 mg insulin/g poly(EDMA-MAH) beads. Results were well fitted to the Langmuir isotherm model. Compared with poly(EDMA-MAH), nonspecific insulin adsorption onto poly(EDMA) beads was very low (0.61 mg insulin/g bead) and can be negligible. It was observed that insulin could be repeatedly adsorbed and desorbed (at least 10 times) without significant loss in adsorption capacity.

Purification of IgG and insulin on supports grafted by sialic acid developing “thiophilic-like” interactions

We developed the synthesis of new supports for the purification of insulin and IgG by affinity chromatography. The preparation of such an affinity support is performed in two steps. First, silica beads are coated with dextran polymers carrying a calculated amount of positively charged diethylaminoethyl groups in order to mask negative charges at its surface. Second, ligand is immobilized using a coupling agent. This support combines the advantages of polysaccharide phases with the excellent mechanical characteristics of silica. The existence of N-acetylneuraminic acid (sialic acid) in insulin receptor and in the antigenic determinant of IgG suggests that such an acid may develop specific interactions usable in affinity chromatography. Therefore, N-acetylneuraminic acid was used as an active ligand. The immobilization of sialic acid can be carried out by using the conventional coupling agent: the carbonyldiimidazole. The performances of these supports grafted by sialic acid were studied by high-performance liquid affinity chromatography (HPAC). The optimization of the chromatographic conditions (support characteristics and mobile phase) enabled us to observe a behavior of the type "thiophilic" of the support, which does not contain sulfone group. This new affinity support allowed a one-step separation of the IgG from mouse ascitic fluids and also allowed the insulin purification from a pancreatic extract with a good purification yields.

Insulin adsorption on coated silica based supports grafted with N-acetylglucosamine by liquid affinity chromatography

Silica beads are coated with dextran carrying a calculated amount of positively charged diethylassminoethyl groups (DEAE) in order to neutralize negative charged silanol groups at the silica surface and in this way to minimize non specific interactions between silica surface and proteins in solution. Dextran-coated silica supports are potentially excellent stationary phases for high-performance liquid chromatography of proteins. These supports combine the advantages of polysaccharide phases with the excellent mechanical characteristics of silica. These supports (silica-dextran-DEAE = SID) are easily functionalized by grafting N-acetylglucosamine (GlcNAc) using conventional coupling methods. The performances of the support bearing GlcNAc are studied by high-performance liquid affinity chromatography (HPLAC) of insulin, the hypoglycemic peptide hormone of the human organism. The study shows that these supports exhibit a reversible and specific affinity towards insulin and allow separations with high purification yields. Moreover, the influence of different physico-chemical parameters (pH, NaCl and insulin concentration) on insulin retention on the support was analysed. This allowed us to optimize the conditions of adsorption and to better understand the interaction mechanisms between insulin and GlcNAc as biospecific ligand.

On-line SPE-RP-LC for the determination of insulin derivatives in biological matrices

An automated and on-line solid-phase extraction (SPE)-liquid chromatography (LC) procedure is described for the determination of insulin in biological matrices. The total procedure consists of two SPEs in series, followed by RP-LC separation. During the first SPE a strong anion-exchange (SAX) cartridge (ISOLUTE, 40-90 microm, 10 x 4 mm i.d.) is used, followed by a RP-cartridge (Luna C(8), 4 x 2.0 mm i.d.). The second SPE cartridge contains the same material as the LC column and is used to transfer the sample from the SAX cartridge to the LC column. The developed system can detect 100 nmol/l insulin in aqueous samples and 200 nmol/l insulin in spiked plasma samples using UV. When electrospray ionization (ESI)-mass spectrometry (MS), was coupled with the developed system, the LODs were lowered by a factor two to 50 and 100 nmol/l for aqueous and spiked plasma samples, respectively.

New synthetic ways for the preparation of high-performance liquid chromatography supports

The latest developments and in particular important synthetic aspects for the preparation of modern HPLC supports are reviewed. In this context, the chemistry of inorganic supports based on silica, zirconia, titania or aluminum oxide as well as of organic supports based on poly(styrene-divinylbenzene), acrylates, methacrylates and other, more specialized polymers is covered. Special consideration is given to modern approaches such as sol-gel technology, molecular imprinting, perfusion chromatography, the preparation of monolithic separation media as well as to organic HPLC supports prepared by new polymer technologies such as ring-opening metathesis polymerization. Synthetic particularities relevant for the corresponding applications are outlined.