Chromatographic assay of pharmaceutical compounds under column overloading

Stability-Indicating Validated Novel RP-HPLC Method for Simultaneous Estimation of Methylparaben, Ketoconazole, and Mometasone Furoate in Topical Pharmaceutical Dosage Formulation

A simple, specific, precise, and accurate RP-HPLC method has been developed and validated for simultaneous estimation of Methylparaben (MP), Ketoconazole (KT), and Mometasone Furoate (MF) topical pharmaceutical dosage formulation. The separation was achieved by Waters X Terra C18 column using mobile phase consisting of buffer (triethyl amine in water, pH adjusted to 6.5 with glacial acetic acid)-acetonitrile (40 : 60, v/v) at a flow rate of 1.5 mL/min and detection at 250 nm. The method showed linearity with correlation coefficient <0.9999 over the range of 0.12–15.2 μg/mL, 0.67–149.4 μg/mL, and 0.42–7.6 μg/mL for MP, KT, and MF, respectively. The mean recoveries were found to be in the range of 99.9–101.1% for all the components. The method was validated as per the ICH guidelines for linearity, limit of detection, limit of quantification, accuracy, precision, robustness and solution stability. Stability indicating capability of the developed method was established by analyzing forced degradation of samples in which spectral purity of MP, KT, and MF along with separation of degradation products from analytes peak was achieved. The method can be successfully applied for routine analysis of quantitative determination of MP, KT, and MF in pharmaceutical dosage form.

Validated Stability-indicating High-performance Liquid Chromatographic Method for Estimation of Degradation Behaviour of Eberconazole Nitrate and Mometasone Furoate in Cream Formulation

The objective of current investigation was to study the degradation behaviour of eberconazole nitrate and mometasone furoate under different International Conference on harmonisation recommended stress condition using reverse phase high performance liquid chromatographic method and to establish validated stability-indicating high performance liquid chromatographic method to determine purity of eberconazole nitrate and mometasone furoate in presence of its impurities, forced degradation products and placebo in pharmaceutical dosage forms. The method was developed using Hypersil BDS, C18, 150Χ4.6 mm, 5 μ as stationary phase with mobile phase containing a gradient mixture of solvent A and B. 0.01 M phosphate buffer with 0.1% triethyl amine, adjusted pH 7.0 with phosphoric acid was used as buffer. Buffer pH 7.0 was used as solvent A and methanol:acetonitrile in 150:850 v/v ratios were used as solvent B. The eluted compounds were monitored at 240 nm. The run time was 50 min. The developed method was validated as per international conference on harmonization guidelines with respect to specificity, linearity, limit of detection, limit of quantification, accuracy, precision and robustness.

Development and Validation of a Stability-Indicating RP-HPLC Method for the Simultaneous Determination of Phenoxyethanol, Methylparaben, Propylparaben, Mometasone Furoate, and Tazarotene in Topical Pharmaceutical Dosage Formulation

A stability-indicating RP-HPLC method has been developed and validated for the simultaneous determination of phenoxyethanol (PE), methylparaben (MP), propylparaben (PP), mometasone furoate (MF), and tazarotene (TA) in topical pharmaceutical dosage formulation. The desired chromatographic separation was achieved on the Waters X-Bridge™ C18 (50×4.6mm, 3.5μ) column using gradient elution at 256 nm detection wavelength. The optimized mobile phase consisted of 0.1%v/v orthophosphoric acid in water as solvent-A and acetonitrile as solvent-B. The method showed linearity over the range of 5.88–61.76 μg/mL, 0.18–62.36 μg/mL, 0.17–6.26 μg/mL, 0.47–31.22 μg/mL, and 0.44–30.45 μg/mL for PE, MP, PP, MF, and TA, respectively. The recovery for all of the components was in the range of 98–102%. The stability-indicating capability of the developed method was established by analysing the forced degradation samples, in which the spectral purity of PE, MP, PP, MF, and TA along with the separation of degradation products from the analyte peaks was achieved. The proposed method was successfully applied for the quantitative determination of PE, MP, PP, MF, and TA in a cream sample.

Separation and determination of clotrimazole, methylparaben and propylparaben in pharmaceutical preparation by micellar electrokinetic chromatography

In this study, micellar electrokinetic chromatography (MEKC) method was developed for the determination of clotrimazole (CLO), methylparaben (MP) and propylparaben (PP) in a pharmaceutical preparation. Separation was carried out in a fused silica capillary (60 cm x 75 microm i.d.) at 25 kV with UV detection at 212 nm. Optimized background electrolyte (BGE) was 15 mM phosphate buffer (pH 7.2) containing 30 mM sodium dodecyl sulfate (SDS) as a surfactant. Rectilinear calibration ranges were 50-500 mg l(-1) for CLO, 10-100 mg l(-1) for MP and 2.5-25 mg l(-1) for PP. The total analysis time was < 12 min.

Recent Advances in the Analysis of Steroid Hormones and Related Drugs

The development during the last 15 years and the state-of-the-art in the analysis of bulk steroid hormone drugs and hormone-like structures and pharmaceutical formulations made thereof are summarized. Other steroids (sterols, bile acids, cardiac glycosides, vitamins D) as well as biological-clinical aspects and pharmacokinetic and metabolic studies are excluded from this review. The state-of-the-art is summarized based on comparisons of monographs in the latest editions of the European Pharmacopoeia, United States Pharmacopoeia and the Japanese Pharmacopoeia. This is followed by sections dealing with new developments in the methodology for the fields of spectroscopic and spectrophotometric, chromatographic, electrophoretic and hyphenated techniques as well electroanalytical methods. The review is terminated by two problem-oriented sections: examples on impurity and degradation profiling as well as enantiomeric analysis.