Improved high-performance liquid chromatographic method for analysis of L-carnitine in pharmaceutical formulations

Rapid Determination of L-carnitine in Infant and Toddler Formulas by Liquid Chromatography Tandem Mass Spectrometry

A rapid and simple analytical method for L-carnitine was developed for infant and toddler formulas by liquid chromatography tandem mass spectrometry (LC-MS/MS). A 0.3 g of infant formula and toddler formula sample was mixed in a 50 mL conical tube with 9 mL water and 1 mL 0.1 M hydrochloric acid (HCl) to chemical extraction. Then, chloroform was used for removing a lipid fraction. After centrifuged, L-carnitine was separated and quantified using LC-MS/MS with electrospray ionization (ESI) mode. The precursor ion for L-carnitine was m/z 162, and product ions were m/z 103 (quantitative) and m/z 85 (qualitative), respectively. The results for spiked recovery test were in the range of 93.18-95.64% and the result for certified reference material (SRM 1849a) was within the range of the certificated values. This method could be implemented in many laboratories that require time and labor saving.

Validation of a Stability-Indicating RP-HPLC Method for Determination of l-Carnitine in Tablets

A rapid and stability-indicating RP-HPLC method was developed for determination of l-carnitine in tablets. The separation was based on a C18 analytical column using a mobile phase which consisted of 0.05 M phosphate buffer (pH = 3): ethanol (99 : 1), including 0.56 mg/mL of sodium 1-heptanesulfonate. Column temperature was set at 50°C and quantitation was achieved by UV detection at 225 nm. In forced degradation studies, the drug was subjected to oxidation, hydrolysis, photolysis, and heat. Among the different stress conditions, the exposure to acidic and basic conditions was found to be an important adverse stability factor. The method was validated for specificity, selectivity, linearity, precision, accuracy, and robustness. The applied procedure was found to be linear in l-carnitine concentration range of 84.74-3389.50 µg/mL (r (2) = 0.9997). Precision was evaluated by replicate analysis in which relative standard deviation (RSD) values for areas were found below 2.0%. The recoveries obtained (100.83%-101.54%) ensured the accuracy of the developed method. The expanded uncertainty (3.14%) of the method was also estimated from method validation data. Accordingly, the proposed validated and rapid procedure was proved to be suitable for routine analyzing and stability studies of l-carnitine in tablets.

Separation of carnitine and acylcarnitines in biological samples: a review

Carnitine and its acylesters are a family of compounds that can be used in the early diagnosis of many diseases. Carnitine and acylcarnitines have a crucial role in fatty acid transportation. The increased level of free carnitine, total carnitine, or the acylesters can act as biomarkers for many metabolic disorders, including diabetes, encephalopathy and cardiomyopathy. The determination of these compounds is difficult owing to the simple aliphatic structure, the chiral center and the permanent positive charge. Although MS detection can be enough to differentiate between some carnitine derivatives, closely related structural isomers of the acylcarnitines must be separated before detection because they form the same base peak and second most abundant ion peak. Different separation methods are discussed in this review, including reversed-phase, hydrophilic interaction, ion exchange, ion pairing, mixed mode liquid chromatography, gas chromatography and electrophoresis. Representative example chromatograms are shown. The sample preparation and the different derivatization reactions are also covered. A table that summarizes the most important analytical methods by detailing the analyte mixture, the sample matrix, the separation mode and the detection method is provided.

Determination of l-carnitine using enantioselective, potentiometric membrane electrodes based on macrocyclic antibiotics

In order to determine the enantiopurity of l-carnitine three enantioselective, potentiometric membrane electrodes were proposed for the assay of l-carnitine. The electrodes were designed using macrocyclic glycopeptide antibiotics-vancomycin and teicoplanin. Acetonitrile was added to the teicoplanine to design a modified teicoplanine based electrode. The linear concentration ranges for the proposed enantioselective membrane electrodes were 10(-4) to 10(-2)moll(-1) for electrodes based on vancomycin and teicoplanin and 10(-5) to 10(-2)moll(-1) for electrode based on teicoplanin modified with acetonitrile. The slopes of the electrodes were 56.5mV per pl-carnitine; 54.5mV per pl-carnitine and 58.3mV per pl-carnitine for vancomycin-, teicoplanin- and teicoplanin modified with acetonitrile-based electrodes, respectively. The enantioselectivity was determined over d-carnitine. The proposed electrodes could be employed reliably for the assay of l-carnitine raw material and its pharmaceutical formulation, Carnilean((R)) capsules. The surfaces of the electrodes are stable and easily renewable by polishing on alumina paper.

Achiral liquid chromatography with circular dichroism detection for the determination of carnitine enantiomers in dietary supplements and pharmaceutical formulations

A simple and enantioselective method for the separation and determination of carnitine enantiomers in dietary supplements and pharmaceutical formulation samples is proposed. This method is based on achiral liquid chromatographic separation of carnitine enantiomers from interferences and direct circular dichroism (CD) detection. The calibration curve of the anisotropy factor (g) versus the enantiomeric excess was linear, with a correlation coefficient (R(2)) of 0.996. The precision evaluated by UV peak area and CD peak area was suitable (RSD <5% in all cases). The usefulness of the proposed method was demonstrated by analysing natural dietary supplements and pharmaceutical formulation samples. This method has the advantages of being rapid and precise, without using an expensive chiral column. The method was suitable for the simultaneous determination of both enantiomers and for assessing the chemical purity of carnitine.

Determination of l-carnitine in food supplement formulations using ion-pair chromatography with indirect conductimetric detection

A novel method for the determination of L-carnitine in food supplement formulations was developed and validated, using ion-pair chromatography with indirect conductimetric detection. The chromatographic method was based on a non-polar (C18) column and an aqueous octanesulfonate (0.64 mM) eluent, acidified with trifluoroacetic acid (5.2 mM). The retention time was 5.4 min and the asymmetry factor 0.65. A linear calibration curve from 10 to 1000 microg/ml (r= 0.99998), with a detection limit of 2.7 microg/ml (25 microl injection volume), a repeatability %RSD of 0.8 (40 microg/ml, n = 5) and reproducibility %RSD of 2.6 were achieved. The proposed method was applied for the determination of carnitine in oral solutions and capsules. No interference from excipients was found and the only pretreatment step required was the appropriate dilution with the mobile phase. Recovery from spiked samples was ranged from 97.7 to 99.7% with a precision (%RSD, n = 3) of 0.01-2.1%.

Simultaneous determination of L- and D-carnitine using a sequential injection analysis/amperometric biosensors system

A sequential injection analysis (SIA) system is described for the simultaneous determination of L-and D-carnitine using amperometric biosensors as detectors. The SIA system was used, because of its high precision, accuracy and low sample and buffer consumption. The biosensors were designed using physical and chemical immobilization of L-amino acid oxidase and horseradish peroxidase (HRP) for the assay of L- carnitine, and D-amino acid oxidase and HRP for the assay of D-carnitine. The linear concentration ranges are in the pmol/l to nmol/l magnitude order, with very low limits of detection. The biosensors/SIA system was used reliably for on-line process control of the enantiopurity of carnitine with a frequency of 34 samples per hour.